Not getting transfer rules for 2LIS_02_HDR , 2LIS_02_ITM and 2LIS_02_SCL
Hello Bi experts,
Actually i am implementing standard Purchasing module in BI system.
While implementing , i have installed cube 0PUR_C04 with data flow before options.
After installation , i am not getting transfer rule for 2LIS_02_HDR , 2LIS_02_ITM and 2LIS_02_SCL .
I am getting transfer rule for 2LIS_02_S011 only.
0PUR_c04 contains these 4 dataspurces - 2LIS_02_HDR , 2LIS_02_ITM and 2LIS_02_SCL , 2LIS_02_S011 .
So how can i get these transfer rule. and if we want to implement std Purchasing module in BI , which Cubes are required or necessary.
In metadata repository also , for Cube 0PUR_c04 , it does not showing transfer rule HDR/ITM/SCL. there also it is now showing transfer rules.
I will be also very thankful if anybody just give me overview of purchasing.
Thanks,
Sada.
Hello Mani,
Thanks a lot.you are the first one who has answered my que. which i expect .
Look at following floe in infoprovider in my system. and please tell me what exactly i should do?
Cube->Purchasing Groups 0PUR_C04
Update Rule->0PUR_C04 2LIS_02_HDR AY0XVMCJPXXXXXXXXXXXXXXXX
Infosource->Purchasing Data (Document Header Level) as of 2.0B 2LIS_02_HDR
Update Rule->0PUR_C04 2LIS_02_ITM 4YSO2PF9XXXXXXXXXXXXXXXXX
INfosource->Purchasing Data (Document Item Level) as of 2.0B 2LIS_02_ITM
Update Rule->0PUR_C04 2LIS_02_S011 CSB3FHGQXXXXXXXXXXXXXXXXX
Infosurce->Purchasing groups 2LIS_02_S011
Transfer Rule->from 2LIS_02_S011 for SC4 Client 600 2LIS_02_S011 SCXCLNTXXX
Datasource->Purchasing groups 2LIS_02_S011
Update Rule->0PUR_C04 2LIS_02_SCL 4ZZ0DMZXXXXXXXXXXXXXXXXXX
Infosource->Pur.Data (Document Schedule Line Level) 2LIS_02_SCL
Mani i am expecting answer from you.
Thanks,
Sada
Similar Messages
-
Not Getting Verification Code for OpenWap, Liquoi and Connect A2 App
I Have purchased the Firefox OS phone but i am Not Getting Verification Code for OpenWap, Liquoi and Connect A2 App
Unfortunately, we do not provide support for apps. You should contact the developer of the app for more information. From what I can see, you are not getting anything from all apps. A simple thing you can to do is to reboot the phone.
To reboot your phone:
#Take the back cover of the phone off.
#Take the battery out.
#Take the SIM card and microSD card out (if applicable).
#Wait 10 seconds.
#Put the SIM card and microSD card back in (if applicable).
#Put the battery back in.
#Put the back cover back on.
#Turn the device on.
#Check if the issue you were having is still present.
Please report back to us if this solved your problem!
Thank you -
Can not get prompt popup for save password and plugin install
I am using Firefox 10.0.0.2 on Win7 b4bit os. I found that I can never get prompt popup with any password form submission. Even the plugin install prompt popup can never turn up.. The prompt popup can show in safe mode only.
I tried to re-install the whole browser and cleared all plugins/extensions. Never worked...PLEASE HELP!Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Try to disable hardware acceleration.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
If disabling hardware acceleration works then check if there is an update available for your graphics display driver.
*https://support.mozilla.org/kb/how-do-i-upgrade-my-graphics-drivers -
No transfer rules for FI master data sources
Hi all
I didnt get transfer rules for some of the FI master datasources.
0GLACCEXT_T011_HIER
0NEG_POSTNG_TEXT
0ITEMSELFLG_TEXT
When I right click on datasource->create transfer rules->Only other option is enabled.WHen I say continue I am getting this error
*Infosource(transaction data) is not known.
How to resolve this isssue.
Thanks.Double click on the data source and go to edit mode, system automatically provides the corresponding BI content infosources if any and install the same.
Not all the fields will be mapped with BI info objects. Only necessary ones as defined in BI content will be available for you.
If you feel the mapping is incomplete you can modify the same according to the requirement.
Hope this helps.
Regards,
Rangz -
Good morning a few weeks ago I send the request for the replacement program of my ipod nano 1st generation and they sent me the shipping box but I did not get the label to go back, and I can not return it , i need to you sent me again the box for return the ipod
Best thing would be to call Apple up again, and let them what has happened and they'll help you!
-
How do I get a refund for in-App and i tune purchases made by a minor? I received an email from Apple with instructions but have not been able to get to a place where you make the request online.
Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards. -
I would like to get data analysis for solving statistic and making graphs, but this function is not in add-in. How should I do? I also set up microsoft office for mac 2011.
Microsoft didn't include that with the 2011 version.
There is a third-party application that substitutes for the add-in: http://www.analystsoft.com/en/products/statplusmac/
They also have a limited, free version. -
I am getting a message that says my iPad has not been backed up for 2 weeks and even though I click OK the message will not disppear and let me use my iPad
Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
Error in Transfer rules for 0REQESTER
Hi,
I have a routine in transfer rules for standard Infosource 2LIS_02_ITM for 0REQESTER.
routine goes like this
INCLUDE rsbctbbp_transfer_r3.
TABLES: srm_proj_contr.
DATA: l_s_errorlog TYPE rssm_s_errorlog_int,
l_text TYPE string.
data: l_rc type i.
perform bbp_get_requester using TRAN_STRUCTURE-afnam
RECORD_NO
g_s_minfo
changing RESULT
g_t_errorlog
l_rc.
returncode <> 0 means skip this record
RETURNCODE = l_rc.
abort <> 0 means skip whole data package !!!
ABORT = 0.
ENDFORM.
FORM INVERT_REQUESTER
USING I_RT_CHAVL_CS TYPE RSARC_RT_CHAVL
I_THX_SELECTION_CS TYPE RSARC_THX_SELCS
CHANGING C_T_SELECTION TYPE SBIWA_T_SELECT
E_EXACT TYPE RS_BOOL.
$$ begin of inverse routine - insert your code only below this line-
DATA:
L_S_SELECTION LIKE LINE OF C_T_SELECTION.
An empty selection means all values
CLEAR C_T_SELECTION.
L_S_SELECTION-FIELDNM = 'AFNAM'.
Selection of all values may be not exact
E_EXACT = RS_C_FALSE.
$$ end of inverse routine - insert your code only before this line -
ENDFORM.
this routine does not have any errors.
when i load the data data wil not be loaded and i will get the following error messege in details
Record 1 :No value found for attribute 0REQESTER for InfoObject 0USERNAME =
can anybody suggest me plz regarading this.
Thanks & Regards,
VijayaThanks!
-
How can I activate the transfer rules for the ODS updating a data target.
We are on BW 3.5 and I'm loading data into the 0FIGL_O10 ODS and then uploading the data into the cube 0FIGL_C10. The data loads just fine to the ODS but when I try to <u><b>'update the data target'</b></u> I get a date & time stamp' error on the info-package transfer rules.
I then Replicate the datasource 80FIGL_O01.
I must then <u><b>'activate' the transfer rules</b></u>.
However I cannot get the transfer rules for 80FIGL_O10 in CHANGE MODE to activate them.
How can I activate the transfer rules for the ODS updating a data target.
The error text is as follows:
DataSource 80FIGL_O10 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 80FIGL_O10 does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 02/15/2007 10:42:33.
The time stamp in the BW system is 11/07/2006 13:11:54.
System response
The load process has been terminated.
<b>Procedure
Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.</b>
Thanks for your assistance.
DennyHi Dennis,
Try, using Business Content to activate your data source
hope this will help you
How activate business content?
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm -
Activating transfer rules for new source system
Hi
we are having 2 R/3 source system in BI. I had activated all the transfer rules with the first source system and now i have created a new source sytem connecting to a different R/3 client. I tried to change the transfer rules point to the new source system using the program RS_TRANSTRU_ACTIVATE_ALL giving the new source system and the infosource name. But i get the error "No Transfer Structure Selected" when i execute the prg.
how can i change the source system without creating the transfer rules for the new source but use the existing transfer rules and just change the source system assigned to it????
Regards
SujaiHi Sujai,
There are many cases when this program is used.
When the Trans rules get de-activated due to impact,we need to first replicate the data source and activate the TR using this program.This generally occurs during the data loads in prd.
It does not makes sense to transport it when there r no changes done to the TR.So simply,u can use this program to activate.
If the program does not work,then you are left with the transport option.
Thanks & Regards,
Suchitra.V -
0CO_PC_PCP_10 System not Proposing Transfer Rules
Hi All,
I want to install and get the transfer rules for this 0CO_PC_PCP_10 data source but when I activate the data source it is not proosing content transfer rules also when I checked in BI content I am not able to see any tranfer rules for this data source.
Also when I check in RSA3 extractor is throwing error without any error details.
My BI content version is 703 level 5
and SAP BW version is 700 level 20
I think it might be due to content version.
Please suggest what coulld be the problem.
Thanks
Mayank.Thanks for you answer, but the problem is not on the bw, but on the ECC. The field quantities is using the data definition from menge in the function module. Menge is defined as 3 decimals. The problem is that when the function module loop over the levels of the exploded cost estimation the precision of the calculation is getting lower and lower.
So my question is if there exits a hotfix from SAP to the solution or do SAP provide any other business content datasource with exploded costestimation which do not have the same limitation as 0co_pc_pcp_03.
BR
Lars Skafte -
Is it possible to download iOS 5 from one iMac on two ipads and not get them totally wiped of apps and stuff. We have an iPad each and a communal email address and an iCloud address each. One iPad now is totally screwed up.
Thank you for your reply.
I am somewhat new to iOS and OS having grown up with DOS and Windows. I am not familiar with IMAP and iCloud and I am not even sure which types of servers my various emails use.
The problem I would anticipate with iCloud is that (I assume) it would limit my access to data (including mail) on the iCloud to when I happen to be logged onto the internet. I also assume(?) that large files (photos etc.) would require some time to download whenever I wish to access them from whichever device I happen to be using (I hope I am wrong about this).
I have kept my devices to 500gb - 1TB for OS and 32gb - 128gb for iOS but since I have pretty slow WiFi (shared with DirecTV Whole Home and Netflix streaming) it is my impression that iCloud might be quite limited due to data transfer times.
Perhaps a factor would be that I have 2 DSL lines and my main DSL line is connected to two wireless routers (to also provide WiFi in a metal building that blocks WiFi and Cellular signals)
I may be totally wrong in my assumptions regarding iCloud. My mail is not so urgent that I need access to it instantly and I could wait until I had internet access or I can get it on my iPhone. My main concern with iCloud would be my data files (Word, Pages, Excel, Numbers etc.).
On the other hand, if I wanted to keep my 10,000 emails that would take up a lot of iCloud memory and I don't know how to measure how much storage it would take or how to move Hotmail or even iCloud mail to iCloud.
It may take me some time to figure this out. -
How to write a validaton rule for Cost Center and plant in PO
Hi,
I need to write a Validation Rule for Cost center and Plant in Purchase Order to get the error message if the Plant and cost center combination didnot match.
But i am not sure in which transaction code do we need to write this validation. Kindly help me by giving T.Code or path to do validation at PO level.
Thanks
Sunil>
Sunil Pal Raj wrote:
> Hi,
>
> I need to write a Validation Rule for Cost center and Plant in Purchase Order to get the error message if the Plant and cost center combination didnot match.
>
> But i am not sure in which transaction code do we need to write this validation. Kindly help me by giving T.Code or path to do validation at PO level.
>
> Thanks
> Sunil
Check OKC7
Regards,
Indranil -
How to refer field of DataSource in transfer rule for DSO object in BI 7.0
hello Gurus,
I am new to BI 7.
pls tellme how to refer field of DataSource in transfer rule for DSO object.
I will assign points to proper answer.
Praveen.hi praveen,
when u create the transformation for the DSO, it asks for the source. in that you enter your datasource, then you get the datasource fields on one side and the rules in the middle and the DSO objects on the other side. whichever field of DataSource you want to refer in tranformation rule, just connect that field to the rule for the required object of the DSO.
hope this will help you.
regards
vaibhav
Maybe you are looking for
-
When I click on the itunes shortcut or the program I get the following message: ITunes has stopped working. My two options are: Windows can check on line for a solution to the problem or close the program. It seems that my entire library is not t
-
How do I get a refund for my iCloud purchase? I purchased the $100.00 one and my data was too large so it could not be backed up
-
How to get the PDF Convert button to show on Internet Explorer 9
Using Internet Explorer 9 and Adobe Acrobat 9 and the PDF convert button does not show up. How do I fix this?
-
I've been having a little trouble ever since I updated to iTunes 7. My nano no longer has my music on it and for some reason can only be seen from the desktop whenever I plug it in. In iTunes all it does is give me this message: "iTunes cannot read t
-
Hello there. I have 4 Altec Lansing speakers hooked up to my computer with a suboofer. Does iTunes support quadraphonic sound output? I can only get my songs to play through 2 speakers. I would ike all my songs to output to all 4 speakers, but I can'