Not Getting USB 2.0 on MS-7125

I have MS-7125 (Bios 1.D) that I'm using an athlon 4000 + processor with.
I thought all my USB ports were supposed to be USB 2.0 but whenever I connect
a USB 2.0 device to any of the ports I get a windows alert saying "this device can perform
faster. click here to see ports". When I click the alert it shows me all the ports but says
that none of them are high speed?? How do enable USB 2.0 on this Mobo???
TIA,
Prof

Check to see if a wire from the front usb ports is connected to pin 10 on the motherboard connector. This pin location should not have anything connected to it.
What operating system are you using? You need XP SP1 for usb 2.0.
If the connector is OK or not used and the OS is good, then try uninstalling all of the usb devices listed in the device manager. Reboot the system and let windows find and reinstall the correct usb drivers.

Similar Messages

Using solaris 11 x86 I do not get usb audio in firefox or additions where can I redirect the internal audio to usb audio? Audio works through solaris

I upgraded to Solaris 11 x86 and Firefox 3.6.10. I have sound through Solaris but not through Firefox or any of the add-ons.
I am using USB speakers which work with Solaris Rythmbox. How can I redirect Firefox audio to my USB speakers?

It works fine, thank you. There is one glitch when I turn off my system and on the next day the audio is missing again. Applying the dsp to dsp 0 reboot and then back to dsp1 reboot I get the audio back.
Is there any way to restart the process?

Thinkpad 8 USB 3.0 port = getting USB 2.0 speeds

I have (2) Thinkpad 8 devices (one for work and one for home) and both are NOT getting USB 3.0 connectivity when connected to a USB 3.0 device.
under device info (in the Charms menu), it says
"device can perform faster when connected to USB 3.0".
That means for whatever reason, the system is NOT seeing a USB 3.0 connected and is dumbing the speed down to USB 2.0. That is a big big big deal. At least for me.
I'm not sure what the solve is here, but I have tried reinstalling windows (fail), downloading drivers from the Intel site (failed to work for me) and have tried uninstalling the USB drivers and having windows reinstall the drivers (failed for me).
I looked at the USB tree viewer and it shows my device's bus speed is USB 2.0 (the device itself is certified USB 3.0 and I have checked the device in another laptop with USB 3.0 and it works like it should).
I am UNABLE to get speeds about 30 - 35 mb/s which is the upper limit of the USB 2.0 spec.
Is this a warranty issue? I think so.
Can anyone from Lenovo help???
Solved!
Go to Solution.

Mark,
Can you kindly take a look at my post here:
https://forums.lenovo.com/t5/ThinkPad-slate-tablets/Thinkpad-8-USB-3-0-port-getting-USB-2-0-speeds/t...
This is a very big discovery and I think it affects ALL TP8 owners. I have confirmed with at least ONE more person in another forum that they too are NOT seeing any USB 3.0 connectivity. I own two of these TP8s and I am not happy that the tablets do not support USB 3.0 straight out of the box. It appears to be a hardware issue (or maybe it's just firmware). I have reinstalled the drivers multiple times but to no avail. The drivers appear to be correct. It just will NOT connect at USB 3.0 speeds due to the HOST (i.e. the tablet) not supporting USB 3.0

Iphone 4s not getting detected in macbook after connecting via usb cable, also photos taken in iPhone not showing in macbook pro

iphone 4s not getting detected in macbook after connecting via usb cable, also photos taken in iPhone not showing in macbook pro

Thanks. I realises that i will hv to go to iphoto to see the photo. Its now working !!!!!

Hi,my iphone 5 is not getting charged,but i can connect to itunes in usb.but when i put for charging it is is saying this accessory may not be supported,please help

my iphone5 is not getting charged,but if i connect to my computer via usb i can use itunes and other all functions.normally if i connect it is charging battery also,but now it is not charging .it is saying this accessory may not be supported and the cable iam using orginal apple cable, alsoiam loosing my battery percentage.please help me

Hello beenafromgbr,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Troubleshooting iPhone, iPad, and iPod touch accessories.
http://support.apple.com/kb/ts2634
Best of luck,
Mario

HT201442 my phone is not getting started,its displaying itunes sign and USB sign on the phone's screen. I have also restored and updated the phone however not getting started

my phone is not getting started,its displaying itunes sign and USB sign on the phone's screen. I have also restored and updated the phone however not getting started

It helped earlier but it has come back again. I don't know what to do. I tried what you said earlier but this time even this is not working either. And quite intrestingly my phone won't turn off. I turn it off, it goes off and then restarts on its own and then keep giving the same message again and again.
Could it be a charging cable, is there any chance that the cable which was working fine one day could turn to be "incompatible" with iphone the other day????????
Please help

Could not get VHB/MDB at block on USB Thumb drive

I'm trying to not have to shell out $100 for DiskWarrior and because im on a Macbook Air, with no media drive, so i think i'd have to shell for a usb optical drive too.... so if someone can help me with this stupid, stupid, occurance (which will teach me to NEVER use hfs+ again), I'd be really appreciative.
I have a PNY 64GB usb 2.0 thumbdrive and it pooped the bed on me....here is all the diagnostic information i can provide
from fsck_hfs -d:
Unable to open block device /dev/disk1: Resource busyjournal_replay(/dev/disk1) returned 16
** /dev/rdisk1 (NO WRITE)
          Using cacheBlockSize=32K cacheTotalBlock=16384 cacheSize=524288K.
   Executing fsck_hfs (version diskdev_cmds-540.1~44).
          Block 2 is not an MDB or Volume Header
          CheckForClean - could not get VHB/MDB at block 133512190
** Checking Journaled HFS Plus volume.
   Invalid B-tree node size
(3, 0)
** The volume   could not be verified completely.
          volume check failed with error 7
          volume type is pure HFS+
          primary MDB is at block 0 0x00
          alternate MDB is at block 0 0x00
          primary VHB is at block 2 0x02
          alternate VHB is at block 133512190 0x7f53bfe
          sector size = 512 0x200
          VolumeObject flags = 0x05
          total sectors for volume = 133512192 0x7f53c00
          total sectors for embedded volume = 0 0x00
from console logs:
6/29/12 9:30:42.000 AM kernel: hfs_swap_BTNode: invalid forward link (0x0a0d0321 >= 0x00001880)
6/29/12 9:30:42.000 AM kernel: hfs: node=5 fileID=4 volume=Windows7 device=/dev/disk1s1
6/29/12 9:30:42.000 AM kernel: hfs: Runtime corruption detected on Windows7, fsck will be forced on next mount.
all my files are flipping gone, but it sure kep the directories.....yay
Thanks in advance for any help

I'm trying to not have to shell out $100 for DiskWarrior and because im on a Macbook Air, with no media drive, so i think i'd have to shell for a usb optical drive too.... so if someone can help me with this stupid, stupid, occurance (which will teach me to NEVER use hfs+ again), I'd be really appreciative.
I have a PNY 64GB usb 2.0 thumbdrive and it pooped the bed on me....here is all the diagnostic information i can provide
from fsck_hfs -d:
Unable to open block device /dev/disk1: Resource busyjournal_replay(/dev/disk1) returned 16
** /dev/rdisk1 (NO WRITE)
          Using cacheBlockSize=32K cacheTotalBlock=16384 cacheSize=524288K.
   Executing fsck_hfs (version diskdev_cmds-540.1~44).
          Block 2 is not an MDB or Volume Header
          CheckForClean - could not get VHB/MDB at block 133512190
** Checking Journaled HFS Plus volume.
   Invalid B-tree node size
(3, 0)
** The volume   could not be verified completely.
          volume check failed with error 7
          volume type is pure HFS+
          primary MDB is at block 0 0x00
          alternate MDB is at block 0 0x00
          primary VHB is at block 2 0x02
          alternate VHB is at block 133512190 0x7f53bfe
          sector size = 512 0x200
          VolumeObject flags = 0x05
          total sectors for volume = 133512192 0x7f53c00
          total sectors for embedded volume = 0 0x00
from console logs:
6/29/12 9:30:42.000 AM kernel: hfs_swap_BTNode: invalid forward link (0x0a0d0321 >= 0x00001880)
6/29/12 9:30:42.000 AM kernel: hfs: node=5 fileID=4 volume=Windows7 device=/dev/disk1s1
6/29/12 9:30:42.000 AM kernel: hfs: Runtime corruption detected on Windows7, fsck will be forced on next mount.
all my files are flipping gone, but it sure kep the directories.....yay
Thanks in advance for any help

I have an ipod shuffle 1st generation it will work if i connect it to my usb port in car or on computer but i can not get it to work using just headphones what coud be the reason for this

I have an ipod shuffle 1st generation. it will work ousing usb port in car or on computer but i can not get it to play using headphones. what would be the reason for this.

Sorry for the typos, I hope my message still gets across!

My Ipod Touch when I try to connect to ANY computer with ANY USB cable I get "USB Not Recognized" Other Ipod devices work with ALL computers and ALL USB cables PLEASE HELP!!!

I am using an IPod Touch 3. I get the error message USB Not Recognized. Now I have tried three different USB Cables and three different computers...... Same error message. My daughters IPod Touch 4 works perfectly with all of those USB Cables and computers, so this is not a USB problem or a computer problem. It must be something with my IPod Touch 3. Every article I go to wants me to look at stuff on the computer but how could that make sense if other IPod Devices work fine? Please. Any information would be greatly appreciated.

You need to provide more information about your network. What frequency does it use (2.4ghz or 5.0ghz), which wireless protocol (a, b, g, b/g compatibility, n), and what security are you using (WEP, WPA2, etc.)?
Please also provide more information about your iPod Touch. Which model is it, and which version of the iOS are you running on it?

Can i copy "setup" (windows 8.1, office 13) to usb and transfer to XP where internet 8 has crashed browser. I am not getting option to save setup

I am trying to copy firefox to USB from my laptop and install on desktop XP as per support forum: Windows updated then crashed internet explore 8 on XP and now I have no internet connection only on that computer (error message says unplugged).. I have windows 8.1 office 13 on my laptop. I am not getting the option to save/ run firefox on the laptop, just automatic download. Should I uninstall and then reinstall? Or maybe I cant transfer to XP in any event. Any advice for non techie would be much appreciated. I've spent quite a lot of hours on this.

appreciate your assistance, but your replies are a little peremptory to say the least. I copied the set up to my USB on Windows 8 laptop and then transferred to XP desktop (as per previous forum entry). If I had the internet on XP, I would have downloaded and installed that way. As it turns out, after I re-rebooted my broadband hub and reopened moxilla, I got the internet back, so evidently a combination of internet explorer 8 update issues which from previous research, had stopped the computer reading the hub address. All up and working now.

I can not get my iPod touch to play through my USB port

I can not get my iPod touch to play through my USB port on my motorcycle stereo amp but a regular iPod works any suggestions on what's wrong or does any one know what Stereo amp for motorcycle will work

Contact the manufacturer of the motocycle system. Many systems are not compatible with iOS devices but work fine for the simple iPods.

I can not get my Ipod to connect with my computer using a usb cord

I can not get my Ipod to connect with my computer using my usb cord ?

Hi starhalcomb,
I'm sorry to hear you are having issues with your iPod touch. I also apologize, I'm a bit unclear on your exact configuration. If you are having issues with your iPod touch not being recognized in iTunes when you connect via USB, you may find the information and troubleshooting steps outlined in one of the following articles helpful:
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
If you don't see your connected device in iTunes for Mac - Apple Support
Regards,
- Brenden

HT1338 I have macbook without a firewire port, I have usb 2.0 port, now my os is not working I can not get through apple logo loading , I can not enter safe mode, I can only enter one user mode, how can I backup my data, I have very important data in my h

I have macbook without a firewire port, I have usb 2.0 port, now my os is not working I can not get through apple logo loading , I can not enter safe mode, I can only enter one user mode, how can I backup my data, I have very important data in my hdd

Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

Not getting all required samples

Hi, I'm new to Labview and don't understand why I'm not getting all the samples I ask for.
I have a USB-6212-BNC module collecting data from 2 analog voltage inputs. I'm using ai0 for the analog trigger, using basically the same VI found as an example here: https://decibel.ni.com/content/docs/DOC-11764
The problem is that I am not getting all the samples needed. As you can see in the example below I only got ~1000 samples when asking for 2000.
Attachments:
Sample Issue.png ‏23 KB
Sample Issue.vi ‏30 KB

Hi bigdoug,
the output of the graph is what you get from the (missing) subVI calculation.
The DAQmxRead is configured to read 2000 samples and it surely does so as you would get a DAQmx error message instead...
Please check your subVI or attach it here with some meaningful default data!
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

My 4th Gen Ipod touch will not get past the apple logo

My 4th Gen Ipod touch will not get past the apple logo (unless the battery is dead, Then it tell me to charge it). Once it gave me the connect to itunes screen. I clicked restore in itunes but the ipod went back to the apple logo before the update download finished. I tried calling apple but my over the phone technical support just expired. PLEASE HELP!

This can be a corrupted software/firmware on your iPod touch. If the recovery mode you did was not forced, then try to force it into recovery mode. This is how:
1. Force it to shut down (note: this sort of shut down should not be preformed unless you are in a situation like this because it is a hardware shutdown and will not attempt to unload software, save unsaved files, safely stop system processes, etc.) to do this, hold down the power/sleep button and home button for about 7 or 10 secs. Also I might be incorrect but I heard that you can just hold down the sleep and home button until the screen goes blank and then immediately let go.
2. Have iTunes running. Hold down the home button and plug the USB cable that came with your iPod into it. Keep on holding on the home button until a picture of a USB cable going into the iTunes logo appears. You are now in a forced recovery mode. (In case your not so tech-savvy forced recovery is the same as a normal recovery mode that an iPod might do if it knows an update or restore failed.)
3. iTunes should have shown a pop-up message about it found a iPod in recovery mode. Click OK, click your iPod from the sidebar and click restore. The iPod will show the apple logo for a while and iTunes will say "preparing iPod for restore" and then "waiting for iPod" this was the longest part of updates for me.
4. iPod will reboot when restore is completed. When I update my iPod it one time showed the apple logo for one whole sync until it showed the slide to unlock screen, so do not worry. P.S if that does not work do a DFU mode restore ( I've been told DFU mode stands for device firmware update mode) I'm running out of room, so google it. Hope this helped ;)

Not Getting USB 2.0 on MS-7125

Similar Messages

Maybe you are looking for