NOT Getting Values for LOCATION...on MultiProvider REPORT

HI All,
I have a MultiProvider on 4 cubes.All these 4 cubes having object LOCATION. I can see data in all cubes for LOCATION. I am running a report on this MultiProvider.
Problem:
I am not getting Values for LOCATION. Why?
What I did:
I checked all location objects of all 4 cubes @ MultiProvider level .
I didn't use any Infoprovider in Qry designer sections.
Please suggest. What is the reason how to solve..
THanks & Regards.
Sri.
Edited by: siri26 k on Dec 5, 2008 10:41 AM
Edited by: siri26 k on Dec 5, 2008 10:41 AM

hello,
in the identification tab of the MP,make sure you have checked all four checkboxes across the 4 infoproviders.
then in Listcube T-Code, select your MP,display the records based on selection inputs and see if location is populated.
If the data is not coming in listcube, then it will not come in the Query too.
Reg,
Dhanya

Similar Messages

  • Not getting values for HR_READ_SUBTYPE while calling from Webdynpro appl

    Hello,
    When we pass infotype,begda,endda and other required parameters and run this FM in standalone we are
    getting values however when same FM is called through Webdynpro ABAP application it is not returning values.
    I tried debugging and i found out that some buffer issue is there.
    But still my problem is not sloved.
    can anyone tell me what can be the reason?
    Regards,
    Mayank

    Hi Mayank,
    Can you tell me how much entries you are getting in return when you run FM standalone.
    there may be possiblility of huge amount of data returnning.
    If u can give more details that will be great!!
    Thanks

  • Not seeing values for the Nav att values in cubes

    Hi Guys
    I hv included an IO cube and that has a NAV attrbute (IO_MAT).. This cube is included inthe MP1. When i see the data in List cube .. i am not able to see the value of that Navigatinal attribute in the list cube. but im able to see the values of the IO object ....
    When we do report on this im not getting values for this nav att in the report.
    I hv select Nav attribute check mark in Cube for this object.
    kindly suggest me ...
    Regards
    AK

    Hi,
    your Multiprovider MP1 may include Cubes C1 and C2.Lets assume your navigational attribute is in C1. When you display MP1 in Listcube, it will display all records from C1 and C2.
    Note that you wont be able to see your Nav Attr. for records coming from C2 because it exits only in C1. To distinguish this, select field 'Infoprovider' in Listcube and restict it to C1 then you shud be able to NAV ATTR.
    Please assign points if useful.
    Cheers
    SB

  • Transaction Type field not getting value in F-05 transaction

    Hi All,
    When ever we are doing a reverse posting for foreign currency valuation using F.05 Tcode it will create a BDC session where we can execute this batch Input session thru SM37.
    This will use F-05 Tcode to post the the entries, but the problem is one of  the field Transaction Type is not getting value for some of the GL account numbers range. This is totally SAP standard program take cares of it. Transaction type field value shuld be populated by '990' value for this GL account range, this is fixed. So is thr any User exit or Screen exit for this Tcode or how we can populate the value....
    Help me...
    Chandar
    Edited by: Bala Chandar on Feb 12, 2009 1:25 PM
    Edited by: Bala Chandar on Feb 12, 2009 1:28 PM
    Edited by: Bala Chandar on Feb 12, 2009 1:33 PM

    Hi Mr/Mrs Bala Chander,
    I am having the same problem.
    When running F.05 a BIM is created for GL account X. GL account X has a field status in which transaction type is defined as a required field because of BCS / ECCS. We have a substitution rule in place which should default the transaction type, based on several criteria. But when executing the BIM, I see that nothing is filled in field transaction type. Did you find a proper solution for your problem? Changing the field status is not an option in my opinion.
    Regards,
    Joep

  • Values not getting displayed for members which doesnt have parents

    Hi
    I created a product dimension with 4 levels .For members which doesnt have parents,data is not getting displayed in JavaClient.
    The values for members which doesnt have parents are getting displayed in the view created for the measures which are dimensioned by Product .I mapped the same view in the CWM2 work space ,but value is not getting displayed for members which doesnt have parents ,but values are getting displayed for members which have parents for measures.
    Is it a bug , we were able to do it in Express ..
    Can anybody help us in doing this.??
    Thnx in Advance......

    Hi,
    This assumes that the members which do not have parents are mapped to the top level in the hierarchy. If they are at a level below the top level then they are not part of the hierarchy and therefore would not be displayed. So this sounds like expected behaviour.
    Hope this helps
    BI Beans PM Team
    Oracle

  • Using bean.variable for inputText but not getting value

    Hi I am using ADF BC JSF 10.1.3.2.
    I have a search page that has : dropdown1,
    based on dropdown1, I populate the dropdown 2 and with autosubmit and partialtrigger and also set either of the two search layouts true
    LAyout 1 based on dropdown1 value, say x, is rendered and I have 3 inputText , each have value= #{backingbean.variable}.
    Now when i am running this page, I got dropdown2 rendered with correct values and layout 2 rendered as required. Problem starts when I enter a value in the inputText1 and click on search button. In the search method, I try to get value for variable with so many ways : getVariable(), this.getInputText1.getValue()/// All these returned null.
    I tried to initialize the variable. In this case, the inputText1 showed initialised value and when i change value and submit, in the search method I still get the old initialised value.
    The inputText1 somehow never sets the value
    Please help..
    Regards
    Sudha

    Hi,
    I'm not exactly sure about what your functionality is but from what I gather the problem could be that if the bean is request scope then the value of the input text is already lost when you are trying to retrieve it.
    In any case I think that the best thing to do is to use the default view criteria functionality to perform the search if it is done on a view object.
    Gabriel.

  • Value property not getting updated for edit on firefox

    Der Sir/Mam,
    I am a selenium tester and my test fails on moxila due to following issue,
    Value property not getting updated for edit on firefox thats why failing the script while identifying the object from xPath.
    The test case run fine on IE.
    I want to identify the object by its xPath saying value = "Some value"
    I can not check thousands of object by looking in to its value attribute property.
    Thanks in advance,
    Rohit

    I'm not sure whether we can solve your question here. We are mostly supporting the released version of Firefox (Firefox 20) for regular use rather than old versions in a test harness. You might need to reach out to the [https://groups.google.com/forum/?fromgroups#!forum/selenium-users Selenium Users Group] if you can't replicate the problem in Firefox 20.

  • Not getting data for 1 field in ODS

    Hi BW Experts,
    I am loading the data from R/3 to BW.I have loaded the data through PSA.The data is available in New data field. After activating the ODS, for 1 field the data is not uploaded and in the report, the values are not displaying.
    I have checked the Transformations also. it is mapped correctly.But still i am not getting data for that field.
    Thanks,
    Siva.

    Thanks for the Update
    1. What is your Service Pack Level?
      Service Pack is 0016
    2. Are you able to see the data in PSA?
       Yes I can see the data in PSA
    3. After load, are you able to see the value in New table?
       Yes i can able to see the data in New data table
    4. Anywhere, are you doing the SORTING of Data Package?
       No I have not sorted the data Package.I have not written any coding on this
    I have not written any coding in transformation also.
    Thanks,
    Siva.

  • About not getting value in wa_vbap from it_vbap.

    REPORT  ZSIMPLEALV.
    TABLES: VBAK, VBAP, SSCRFIELDS.
    TYPE-POOLS: SLIS.
    TYPES: BEGIN OF TY_VBAK,
           VBELN TYPE VBAK-VBELN,
           BSTDK TYPE VBAK-BSTDK,
           KUNNR TYPE VBAK-KUNNR,
           END OF TY_VBAK.
    TYPES: BEGIN OF TY_VBAP,
           VBELN TYPE VBAP-VBELN,
           POSNR TYPE VBAP-POSNR,
           MATNR TYPE VBAP-MATNR,
           KWMENG TYPE VBAP-KWMENG,
           VRKME TYPE VBAP-VRKME,
           ARKTX TYPE VBAP-ARKTX,
           WERKS TYPE VBAP-WERKS,
           NETPR TYPE VBAP-NETPR,
           END OF TY_VBAP.
    TYPES: BEGIN OF TY_FINAL,
           VBELN TYPE VBAK-VBELN,
           BSTDK TYPE VBAK-BSTDK,
           KUNNR TYPE VBAK-KUNNR,
           POSNR TYPE VBAP-POSNR,
           MATNR TYPE VBAP-MATNR,
           KWMENG TYPE VBAP-KWMENG,
           VRKME TYPE VBAP-VRKME,
           ARKTX TYPE VBAP-ARKTX,
           WERKS TYPE VBAP-WERKS,
           NETPR TYPE VBAP-NETPR,
           END OF TY_FINAL.
    DATA: IT_VBAK TYPE TABLE OF TY_VBAK,
          WA_VBAK TYPE TY_VBAK.
    DATA: IT_VBAP TYPE TABLE OF TY_VBAP,
          WA_VBAP TYPE TY_VBAP.
    DATA: IT_FINAL TYPE TABLE OF TY_FINAL,
          WA_FINAL TYPE TY_FINAL.
    DATA: IT_CATLOG  TYPE SLIS_T_FIELDCAT_ALV,
          GT_SORT   TYPE SLIS_T_SORTINFO_ALV,
          WA_CATLOG TYPE SLIS_FIELDCAT_ALV,
          GS_LAYOUT TYPE SLIS_LAYOUT_ALV.
    SELECTION-SCREEN  BEGIN OF BLOCK B1 .
    SELECT-OPTIONS: PO_DAT FOR vbak-bstdk.
    SELECTION-SCREEN END OF BLOCK B1  .
    START-OF-SELECTION.
    PERFORM GET_DATA_FROM_VBAK.
      PERFORM GET_DATA_FROM_VBAP.
      PERFORM WRITE_DATA_TO_FINAL.
    END-OF-SELECTION.
    PERFORM SHOW_DATA.
    *&      Form  GET_DATA_FROM_VBAK
          text
    -->  p1        text
    <--  p2        text
    FORM GET_DATA_FROM_VBAK .
      SELECT VBELN BSTDK KUNNR
        FROM VBAK
        INTO TABLE IT_VBAK
        WHERE BSTDK IN  PO_DAT.
    ENDFORM.                    " GET_DATA_FROM_VBAK
    *&      Form  GET_DATA_FROM_VBAP
          text
    -->  p1        text
    <--  p2        text
    FORM GET_DATA_FROM_VBAP .
    SELECT  VBELN  POSNR MATNR KWMENG VRKME ARKTX WERKS NETPR
      FROM VBAP
      INTO TABLE IT_VBAP
      FOR ALL ENTRIES IN IT_VBAK
      WHERE VBELN = IT_VBAK-VBELN.
    ENDFORM.                    " GET_DATA_FROM_VBAP
    *&      Form  WRITE_DATA_TO_FINAL
          text
    -->  p1        text
    <--  p2        text
    FORM WRITE_DATA_TO_FINAL .
      REFRESH IT_FINAL.
      LOOP AT IT_VBAP INTO WA_VBAP WHERE VBELN = VBAK-VBELN.
           WA_FINAL-VBELN = WA_VBAP-VBELN.
           WA_FINAL-POSNR = WA_VBAP-POSNR.
           WA_FINAL-MATNR = WA_VBAP-MATNR.
           WA_FINAL-KWMENG = WA_VBAP-KWMENG.
           WA_FINAL-VRKME = WA_VBAP-VRKME.
           WA_FINAL-ARKTX = WA_VBAP-ARKTX.
           WA_FINAL-WERKS = WA_VBAP-WERKS.
           WA_FINAL-NETPR = WA_VBAP-NETPR.
    IF SY-SUBRC IS INITIAL.
      READ TABLE IT_VBAK INTO WA_VBAK WITH KEY VBELN = WA_VBAP-VBELN.
           WA_FINAL-VBELN = WA_VBAK-VBELN.
           WA_FINAL-KUNNR = WA_VBAK-KUNNR.
    ENDIF.
       APPEND WA_FINAL TO IT_FINAL.
        CLEAR: WA_FINAL, WA_VBAP, WA_VBAK.
      ENDLOOP.
    ENDFORM.                    " WRITE_DATA_TO_FINAL
    "tell me anybody 'why am i not getting value in wa_vbap from it_vbap?.

    Hello Mr:Sardar,
    There are a lot thinks we need to notice while writing a report.
    First of all VBAP is an item table and VBAK is a header table. For each header data there can be multiple item data. So your report should loop over header data first
    Let it be
    loop at it_vbak into wa_vbak.
    endloop.
    Now wa_vbak will contain one header data, for this header there can be more than one item data in vbap.
    now the code will become
    loop at it_vbak into wa_vbak.clear wa_vbap.
      loop at it_vbap into wa_vbap where vbeln = wa_vbak-vbeln.
      wa_final-vbeln = wa_vbak-vbeln.
      append wa_final to it_final.
      endloop.
    endloop.
    Another thing u must take care of is that while u are using FOR ALL ENTRIES in your select statement, check whether this itab is initial or not.If itab is initial program will fetch all the data irrespective of conditions. Please read F1 help for for all entries.
    Hope this will help you.
    Regards,
    Antony Thomas

  • I have a message: "Could not get session for the OEM Repository."

    Dear Sir,
    I browsed reports that has been published in OEM. But I received an error:
    "Could not get session for the OEM Repository. Check to ensure that the OEM Repository is up."
    What can I do?
    Thank a lot

    You will need to go into your Files and locate the song.  By default, iTunes saves songs in the iTunes Media Folder which can be found in the following locations:
    Mac OS X: /Users/username/Music
    Windows XP: \Documents and Settings\username\My Documents\My Music\
    Windows Vista: \Users\username\Music\iTunes
    Windows 7 and Windows 8: \Users\username\My Music\iTunes
    If you locate your song file, when you try to play it in iTunes, you will be given an option to locate.  Navigate to the file in the pop up window and iTunes will re-path the file location.
    Most people encounter this issue when moving to a new computer or if you have your music saved on an external drive or folder that you have since moved or removed.  The imperative part is finding the song so you can re-map it.

  • Not getting values in the variable

    Hi experts,
    in  this program  
    i want VBPA-vbeln = xblnr....but there is a data length error. so I ahve declare one variavble of length 10. & i am moving this xblnr to this variable but not getting value in that variable that i am moving..& give me the possible solutions...
    when '0FI_AR_4'.
             data: t_DTFIAR_3 like DTFIAR_3 occurs 0 WITH HEADER LINE.
              data: BEGIN OF t_DTFIAR_3 occurs 0.
                      include structure DTFIAR_3.
              data:        xblnr1(10).
              data: END OF t_DTFIAR_3.
              data : BEGIN OF t_partner occurs 0,
                         VBELN like vbpa-VBELN,
                         parvw like vbpa-PARVW,
                         kunnr like vbpa-kunnr,
                     END OF t_partner.
            data : xblnr1(10).
    t_DTFIAR_3[] = C_T_DATA[].
      move t_DTFIAR_3-xblnr to t_DTFIAR_3-xblnr.
                select VBELN PARVW kunnr
                       into table t_patner
                       from vbpa
                       FOR ALL ENTRIES IN t_DTFIAR_3
                       where VBELN = t_DTFIAR_3-xblnr.
    SORT t_partner BY VBELN PARVW.
              loop at t_DTFIAR_3.
                 loop at t_partner where VBELN = t_DTFIAR_3-xblnr1.
                       if t_partner-PARVW = 'ZA'.
                           t_DTFIAR_3-YPARVW1 = t_partner-PARVW.
                           t_DTFIAR_3-YPART1 = t_partner-kuNNR.
                       elseif t_partner-PARVW = 'ZR'.
                           t_DTFIAR_3-YPARVW2 = t_partner-PARVW.
                           t_DTFIAR_3-YPART2 = t_partner-kuNNR.
                       ELSEif t_partner-PARVW = 'ZE'.
                           t_DTFIAR_3-YPARVW3 = t_partner-PARVW.
                           t_DTFIAR_3-YPART3 = t_partner-kuNNR.
                       ELSEif t_partner-PARVW = 'ZS'.
                           t_DTFIAR_3-YPARVW4 = t_partner-PARVW.
                           t_DTFIAR_3-YPART4 = t_partner-kuNNR.
                       ENDIF.
                       MODIFY t_DTFIAR_3.
                endloop.
              ENDLOOP.
              C_T_DATA[] = t_DTFIAR_3[] .
    Thanks in advance

    HI,
    While moving use the WRITE TO option.
    WRITE VBPA-vbeln TO xblnr.
    Regards
    Sudheer

  • RBA GATP check is not getting invoked for Sales Order

    Hi Everyone,
    RBA GATP check is not getting invoked for Sales order.
    I maintained the configuration settings for 'Rules-Based Availability Check', APO general settings (check mode, check instruction), carried out integrated rule maintenance, Rule determination for the combination of order type & product, associated the check mode to product master. Also maintained all the settings in ECC towards Req class, Req type, checking control etc.
    However, sales order is not invoking RBA Check though it is showing up the 'Rule' icon in the screen. Also, in the APO Availability check in Sales order when I click onto 'check instruction', I get the checking mode that pertains to RBA for business event 'A' (Sales order). Though I have not maintained any stock for the main material for which I have the sales order, yet system is confirming any quantity that I put in.
    I would expect that system would propose the same material in an alternate location where we have stock through RBA.
    Request you to share ideas on this.
    Regards,
    Avijit Dutta

    Hi Avijit,
    You should used No Checking Horizon in Checking instructions and also Check your rule control settings.
    What you have defined in 1st and 2nd steps. Check whether product substitution is carried out or Location Substitution.
    Thanks,
    Bala.

  • Addition of a Field in EKKO/Data not getting populated for that field

    Hi All,
    I have added a Z Field in EKKO Table through the Append Structure "CI_EKPODB".
    There are around 2000 records in EKKO and for all the records that Z field is Blank.
    But, when I write a Select Query in Program to Fetch the Records where that Z Field is BLANK, I get only 50 Records.
    The same happens when I Execute SE16 for EKKO by giving condition Z Field = INITIAL. I get only 50 records in the output.
    Please help me understand why I dont get all the Records where that Z Field is INITIAL?
    Is any customization required or is this a Technical Issue?
    Please help.
    Thanks in Advance.

    hi rohan,
    if you are adding a field in a table  by append structure then make that field as ZZ instead of Z to differentiate it from normal fields.
    now when you have created the field in a append structure then if have not checked the initial flag.thats why u are getting this data inconsistency.
    this is because earlier 2000 entries are prestent in the table , now when you add another field in the table then that field will not have value for those 2000 records.
    now when you create the fiels select the init flag field,if you select this then new flag field will  NOT NULL,so initial values will be filled for that field for existing 2000 records.
    Note : NULL and INITIAL are different things, NULL means not defined and initial means which is having its initial value.
    check that init flag and u will get those 2000 records, you are getting inconsistent data now becuse value for that field is null ie not defined.
    hopr this will solve ur post and u wil get the concept of append structure.
    Thanks and regards,
    Tanmaya

  • Planned order not getting generated for FG

    Dear Experts,
    Planned orders not getting generated for the Finished Goods - X which is having MRP Type M0 - MPS fixing type strategy group 20 which is copied fron another FG - Y , its a new product and production plan has been updated through MC88 - Rough cut planning but the planned orders are not getting generated.
    And for the material valid production version exists with selection method 3 and individullcollective as 1.
    Please let me know what might be the possibalities and what all the key fields i need to check.
    Thanks & Regards,
    Sampath
    Edited by: sampath s on Jul 13, 2011 11:31 AM

    Dear,
    In general MPS is run for High value items ( if you use like Gold , Platimum or A class items. ).
    Always only single level is used for Explosion and planning. then only you can analyse the requirements at each stage before procurement.
    Otherwise if you run MPS to multi level, Bottom most high value will be procured without any notice to authorities. Even you may cancel the process in mid way. At that time what will happen to the procured high value material.
    So for that purpose only single item single level MPS concept is evolved.
    Fo that you run MPS at single level so that only for the first level MPS will be carried out.
    Check and revert back.\
    Regards,
    Alok Tiwari

  • Could not determine value for variable 0P_FVAEX (or 0P_CTPCA)

    I get the below error while accessing a query on the planning Info Cube. I used the SAP Exit variable Most Current Data (Transactional InfoCube) (0S_RQTRA) in the query for the Characteristic - Request ID (0REQUID) to extract the data from the yellow request too.
    I do not use the below variables as in the below eror in my query at all. Please assist.
    Diagnosis
    This error diagnosis is specific only to the variables 0P_FVAEX or 0P_CTPCA !
    Termination message BRAIN 632 appears:
    Could not determine value for variable 0P_FVAEX (or 0P_CTPCA).
    System Response
    1.     Operation method of SAP-Exit-Variables 0P_FVAEX or 0P_CTPCA
    With queries from the CO application, both SAP-Exit-Variables look for an entry for 'controlling area'. With this controlling area from the selection screen, the SAP-Exit-Variables program reads the attributes for InfoObject 0CO_AREA (controlling area).
    With queries from the FI application, the SAP Exit Variable 0P_FVAEX looks for an entry for 'company code'. With this company code from the selection screen, the SAP Exit Variables program reads the attributes for InfoObject 0COMP_CODE (Company Code).
    0P_FVAEX determines the fiscal year variant (attribute 0FISCVARNT) from the attributes for 0CO_AREA (CO queries) or 0COMP_CODE (FI queries). 0P_CTPCA determines the currency type of the profit center local currency (attribute 0CURTP_PCA) from the attributes for 0CO_AREA.

    Hello,
    you need to take a closer look at your query. Somewhere you used one of the 0P_* exit variables, which work only for controlling related InfoCubes. Use your own variables.
    Regards,
    Marc
    SAP NetWeaver RIG

Maybe you are looking for