Not Getting Video Signal

I just purchased an 80 GB Black iPod Classic today and I was told by the Apple salesman to also purchase the "iPod A/V Cable" so I can also view videos. It cost about $19.99 and so I purchased it. After syncing everything into my iPod, I get ready to play all of it back on my TV. I plug everything in the right color codes, except I only get audio. The audio plays back and sounds fine, but the video is non-existent. Is there a way to fix this or do I need to take this iPod A/V cable back?
Your help is greatly appreciated at this time. Thanks!

Hello there.
I'm pretty sure you will need the new AV cable that connects to the bottom of the ipod. It 's confusing because the chart on this page makes it seem like the old AV cable will work too. I took mine to the Apple store and all seemed to agree that I needed the new cable out in 3-4 weeks.
Anybody know if I'm wrong?
http://docs.info.apple.com/article.html?artnum=300233

Similar Messages

  • Please help, Ps4 not getting a signal....

    I'm not getting a signal on my tv for my ps4. The blue light flashes for a minute then turns solid white. I borrowed the system from my brother. Apparently he said it was messing up before i got it. He said it was working then he switched tv's to watch a movie on a bigger tv. After watching the movie he switched back to the original tv and thats when it lost signal. Sorry if it sounds confusing, im new to this so any help would be greatly appreciated, thanks in advance.

    When you switch tv's, you need to reset your video settings. Follow the following instructions to get into safe mode, and choose the change resolution option https://support.us.playstation.com/app/answers/detail/a_id/5044/related/1/session/L2F2LzEvdGltZS8xNDM4OTM0ODQ0L3NpZC8ycDNnRWl0bQ%3D%3D

  • HT1454 why i can not get video out from my ipod touch after i did the upgrade

    why i can not get video out from my ipod touch after i did the upgrade

    why i can not get video out from my ipod touch after i did the upgrade

  • HT1454 Can not get video out from my ipod touch 3rd gen. Any ideas? It should nt be diffiicult to do this on the 21 st century, or not?

    After having spent EUR 130 on cables from apple, i still can not get video out from my ipod touch 3rd gen. Any ideas? It should nt be diffiicult to do this on the 21 st century, or not?

    Backing up an iOS device will copy some data to a backup file within iTunes, but this excludes all media.  You can also transfer iTunes Store purchases from the iDevice to iTunes but, without using a third-party tool, nothing else.  As long as you do not sync the iPod with your new library, the media that's on it will remain ... for as long as it keeps functioning, is not lost, stolen, eaten by the dog, ...
    You may also have an option to recover your previous library from your old laptop; as long as its hard drive isn't fried, a computer repair store or technician may be able to extract the drive, mount it in an external enclosure, and copy your data to another PC.  Whatever you choose, there is no real alternative to having all your media on your computer, managed by iTunes, and regularly backed up to another device/location.

  • Qosmio X500 - enternal monitor does not get a signal

    Hi
    its come a time when I need a external monitor to extend my desktop. I plugged in one of my monitors to the laptop. Qosmio sees it but the monitor does not get a signal. Tried a 2nd monitor and it does the same thing says cable not connected on 1 and power save on other.
    I tested the monitors and cables on another laptop in the house and they work fine so its down to the laptop. Ive tried hdmi on a tv and that works fine, so seems to be just the vga as the laptop sees the monitor when connected does that mean the vga port is ok?
    And could be something else? Any advice is welcome cheers.
    John

    Your posting is a bit confusing for me and I don't see clear structure there. What have you tested and the result is not clearly described.
    >Ive tried hdmi on a tv and that works fine
    How have you tested it? With your Qosmio or what?
    Anyway, it is not easy to say what is wrong there. Try to test it with TV again. Connect your Qosmio to the TV using HDMI cable, switch to HDMI port on TV and use FN+F5 key combination to switch between LCD and TV.
    Does it work?
    >so seems to be just the vga as the laptop sees the monitor when connected does that mean the vga port is ok?
    How to understand this? Is desktop shown on the screen when you use VGA port?

  • I am using Vodafone at Delhi India with my Iphone 5S, 3g is activated with my number but i am not getting 3G signals iphone is also activated with vodafone but still waiting for 3G signals contacted vodafone but wasted my time pls help using APN www

    I am using Vodafone at Delhi India with my Iphone 5S, 3g is activated with my number but i am not getting 3G signals iphone is also activated with vodafone but still waiting for 3G signals contacted vodafone but wasted my time pls help using APN www

    Keep on talking to Vodafone and keep pestering them until you get a satisfactory answer.  Whether you get a 3G signal or not, is entirely the responsibility of Vodafone India because they are your carrier/phone company and nobody here can help you with that on a public user to user technical support forum.
    Contact Vodafone as they are the only ones who can help you.

  • K8n NEO4 bios update to 1D: audigy + pci modem = no start (not even video signal

    I updated my old 1.4 bios (alredy updated once) to 1D. The system was running fine but i was preparing for dual core update.
    After bios update the neo4 was like dead. Not even video signal.
    I removed both SB audigy and pci adsl modem and it started as usual.
    If i add 1 pci card only (audigy OR PCI modem) the system works, while if i add BOTH the cards it is dead.
    Changing slots did not solve the problem.
    System is running with defaults values.
    Any bios setting? do i have to go back to 1.4, 1.5 or 1.6 bios to use an athlon 64 X2 4800+?
    Thx

    Modded bios doesn't add cpu id code .
    murdoK has a mod of 7125 here : http://msi-forum.de/thread.php?threadid=24337
    4800 X2 supported since 1D according to this :
    http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=637&kind=1

  • [TV@Plus] Not getting any signals

    I recently purchased a TV @nywhere Plus card. I installed it, along with all the software for it. But no matter what I try I cannot get any signals with TV or FM. I know the card is installed properly, because the remote works fine. The antenna is plugged in properly. I've even installed drivers from the MSI website. I've tried using a cable antenna instead of the stock one. I've tried fiddling with every setting I can find. I've tried using the TV Winamp Plugin. I just do not know what the problem is. As far as I can tell it's a hardware problem, but I just can't figure it out. Does anybody have any idea what the problem might be?

    well fred, with as little information as you have supplied, all you will get are guesses
    Suggestions on posting and getting better answers
    Is your problem caused by your PSU?
    please post your system specs, your PSU specs, your location and TV signal type
    have you tried the card in another slot, or in another system?

  • Macbook will not get wifi signal when docked into hedge dock station

    My Macbook will not get a wifi signal, whenever docked into the Hedge Dock Station. It will however, get the signal when out of the station. It worked for months before.

    Wi-Fi is not Bluetooth. If you are using the phone as a Wi-Fi hotspot, then you connect to it using Wi-Fi, not Bluetooth. There's no Bluetooth pairing involved.
    Turn on the Wi-Fi hotspot feature on your phone.
    On the Mac, open System Preferences and click on the Network icon.
    Select "Airport" in the left pane and then click the "Turn AirPort On" button.
    Select the name of your phone in the drop-down next to "Network Name".
    Provide the password you setup for the network on your phone.
    It's nice to have the ability to turn the Wi-Fi on and off in the menu bar rather than have to open System Preferences each time. You can click the checkbox next to "Show AirPort status in menu bar" in the Network pane to do just that.

  • I have the ipod touch 4g (64gb) I sync all the song I want to put in the ipod but it's empty content inside the ipod, do I need a wi-fi network to have my ipod work? cause I'm not getting any signals at all!

    I have a new 64GB ipod touch 4G and I followed all the instructions except when I checked my ipod menu it says no content and do I need a wi-fi network to get my ipod work? cause I can't get any signals in my area, I do have home internet connection.. pls. help!

    Hi,
    No.  You do not need Wi-fi to sync music to or play music on your iPod.  Try resetting your iPod:  http://support.apple.com/kb/HT1430. 
    Hope this helps! 
    ---likeabird---

  • MSI z87m - restart problem and not showing video signal.

    Intel Core i7-4770 Quad-Core Desktop Processor 3.4 GHZ LGA 1150 8 MB Cache BX80646I74770
    Motherboard:
    MSI Computer Corp. Motherboard ATX DDR3 1333 LGA 1150 Motherboards Z87-G45 GAMING
    Video:
    EVGA GeForce GTX760 SuperClocked w/EVGA ACX Cooler 2GB GDDR5 256bit, Dual-Link DVI-I, DVI-D, HDMI,DP, SLI Ready Graphics Card (02G-P4-2765-KR) Graphic
    RAM
    2x Corsair Vengeance Red 8GB (2x4GB) DDR3 1866 MHz (PC3 15000) Desktop Memory (CMZ8GX3M2A1866C9R)
    PSU
    Corsair Enthusiast Series TX 850 Watt ATX/EPS Modular 80 PLUS Bronze (TX850M)
    Case
    Thermaltake Commander MS-I Epic Edition VN400A1W2N-B No PS Mid Tower Case (Black/Red)
    Hi, a year ago I build my computer, a gaming PC, and everything works fine until a few days ago, exactly one year after the build, I was on mi pc when suddenly all freeze out, the video and the sound I just had to press the shutdown button, when I start the pc again it just start like 3 seconds and restart infinitely.
    After a web search I start to think that the PSU was the problem but after more research looks like the motherboard was the problem so I take out the battery and put it back and start the pc.
    The PC starts again, but another problem begin after that there is no video signal. The monitor doesn’t show any image I try to disconnect the Graphic card but nothing I press the button of the Motherboard to reset it but still the same I can’t solve the problem but there is more, after the PC start it stays ON like a minute and then restart again but the second time no restart anymore.
    Any suggestion ?

    So now you can boot with no auto restart, but without display?
    You tried with IGD (on-board display)?
    Maybe try another monitor or cable,
    and use only one RAM stick w/ different slots to boot.

  • Why can I not get phone signal in France

    I am not able to signal in France Help???

    Jennifer,
    Thanks for the reply, I had tried all that to no avail. I have borrowed a phone from a French friend and bought a SIM card so I am now ok in France.
    From all the non Verizon answers I got to my posted problem, I seriously doubt there is anywhere in France except along the border with Germany or Belgium that the Verizon phone and the international package will actually work.
    I wonder why you sold it to me.
    Again, thanks for the reply.
    Eric
    Sent from my iPad
    >>Personal information removed to comply with the Verizon Wireless Terms of Service <<
    Message was edited by: Verizon Moderator

  • Can not get videos to work on my 80 gig Ipod

    I have converted my videos to the right format using both a converter that I found online and converting them using itunes. They videos are on my ipod and play with sound but I do not know how to get the video working. If someone could please help that would be great.

    hmm well im sad to say that i cant help you, but i am experiencing some of the same problems.. that is doing the same thing with my tv shows and my movies//dvds i have converted
    Windows   Windows XP  

  • Not getting any signal out from the NI9472 cRIO

    I want to generate PWM signal from the NI9472 in cRIO.
    I made a vi which (I think) should generate the pulse in the DO0 port.
    but when I measure DO0 with oscilloscope, I get nothing out from it.  (The LED comes up in NI9472 that channel 0 is active)
    Is there anything I am doing wrong here? (I attached the project and block diagram in jpg)
    Thank you so much.
    Attachments:
    PWM.zip ‏100 KB
    121.jpg ‏54 KB

    Hi hinewwiner,
    Overall, your implementation looks good. I think it might be worth your while
    to look at two other examples of PWM I found on our website which may be more
    efficient and more accurate. Another important thing to not about the 9472 is
    that it must have an external power supply connected to it for any output to occur.
    If you do not have any supply, the channel may be switching (and thus the
    channel LED will show activity,) but you will not see any change in output
    voltage. Also note that the LED should be off when the channel is not switched,
    and on when it is switched. So if you run your PWM at a slow enough speed, you
    will see the light turn on when the pulse is high and off when the pulse is low
    (at the rates shown in your attached project, your eye will probably not be
    able to discern a change.) It may also be helpful for you to describe exactly
    what the LED is doing to get a better idea of whether the code has stopped in a
    channel closed position, or if it is simply changing very fast.
    Another slight possibility is that the unit has experienced an over current
    condition. Because the module has automatic over current protection, if it is
    exposed to a current greater then 13A, the unit will open the channel switch
    and wait for a reset. This may have occurred, and the activity light will still
    show normal operation. To ensure that this condition is removed, simply reset
    the channel, or disconnect and reconnect the external power supply.
    For testing purposes, it may also make sense to simplify your VI by removing
    the case structure, start button, stop button and outside while loop. You can
    then simply start the VI in your real time controller, and stop the VI using
    the abort command given in your real time code.
    Here are two great resources for creating PWM functions in FPGA.
    Developing a PWM Interface using LabVIEW FPGA
    Pulse Width Modulation Example DAQ Personality
    Sincerely,
    Asa Kirby
    Applications Engineer
    National Instruments
    Message Edited by Asa_K on 05-20-2008 12:22 PM
    Asa Kirby
    CompactRIO Product Marketing Manager
    Sail Fast!

  • Marantz iPod dock not feeding video signal to tv

    I have the Marantz IS201 iPod dock, which works fine for audio, and talks to the tv fine in terms of displaying iPod data on the screen. But when I actually try and play videos or photos, no joy - most I get is the little play arrow at top left of screen, for a moment. Anyone else have any experience with this?

    Easiest way to do this now is with apple tv

Maybe you are looking for