Not going to sleep when PC is connected via SMB

If I have my mac set to go to sleep after a period of inactivity, it goes to sleep while my PC is still connected to it via SMB. Not while any files are beig used, but if they're not used for a while. Is there any way I can change this anyone?

Sorry - I was very tired when I posted that - I guess it could have made more sense!!
What I want is for my mac to only go to sleep if there's nobody connected via SMB.
At the moment, I either have to set the sleep timer to never, or when I start to work on a file from the mac on the PC I find that the Mac's gone to sleep even though the PC's switched on and connected to it. Then I have to go and wake up the mac and reconnect with the PC.

Similar Messages

Computer not going to sleep when lid closed

My wife's new MacBook Air has a couple of problems we can't figure out. First sometimes the computer is not going to sleep when lid is closed and when we lift the lid everything is frozen.
Second, the user Library folder is not seeable in her user account. I know it's there because on the side bar there's a short cut to Preferences folder which we can open.
Strange behavior.
Thanks,
Ron

Ron,
The user library folder (~/Library/) is hidden by default in Lion. I assume Apple doesn't want people mucking around with the sensitive files in there. So this is normal behavior.
As for the freezing issue, I would suggest you reset your power management and perform a safe boot to clear out caches. You should also see if the issue persists after disconnecting USB perhipherals.
Here's how:
Power Management:
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
Safe Boot:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).

MacBook not going to sleep when connected to WiFi

Hi there,
my MacBook 3,1 is not going to sleep as long as it is connected to WiFi.
It starts the process of going to sleep as my VNC connection gets dropped but it stays awake. I can easily reconnect.
Everthing else is working fine. Any suggestions?

Hello everyone,
I'm facing the same syptom. I tried many things and now havw to live with putting the MacBook to slee by hand. I had some other issues just before that:
1: The MB returned randomly from sleep while being closed. That was annoying. I think it was fixed after installing smart sleep and doing some cleanup in the preference files.
2: Then I was put "randomly" to sleep. I figured that came from overheating the processor (thus I'm gld it went to sleep). The fan speed control was set to constantly 2000 rpm. Installing fanControl helped.
3: Lid closing did not init the sleep mode and the backlight is not turning off. Niether does it wake up on opening when I put it io sleep manually (I have to press a key).
The sensor for closing the lid seems to work, if it is the same which controls the maximum brightnes of the sleep indicator light (pulsing). It is darker when the lid is closed.
I wonder if there is some settings tool.
Besides I think the issues started after the Software updates around 12th of dec. 2008, with MacOS10.5.6 and the EFI & SMC firmware updates.
I'm eager to get answers.
Kid regards, Ralf.

Thunderbolt drive not going to sleep when iMac does

Not sure if my title makes sense...
Ok, I have an Intel iMac running the latest version of the O/S
Attached via firewall I have a Lacie external 2big drive
Attached via thunderbolt I have a lacie 2big thunderbolt drive
When the iMac goes to sleep by itself, i.e. I walk away and let the system decide when to sleep, only the firewall connected drive shuts down.
The thunderbolt drive remains live with that nice big blue lamp on the front of the drive remaining lit.
If I manually put the imac to sleep, then both drives shut down. I'd really like both drives to shutdown properly when the system decides I've gone to bed....or gone out or whatever.
Any suggestions?

I have exactly the same problem with three lacie_2big drives. Thay do not go to sleep when my iMac is sleeping. I never had this problem untell using OS X Mavericks. Please help!

Computer not going to sleep when scheduled

FOr some reason the last couple days my system is not going to sleep even though its scheduled to in energy saver. Nothing has changed except the last update earlier this week.

Have a look at > Mac OS X: Why your Mac might not sleep or stay in sleep mode

Monitor not going to sleep when close my lid to MacBook Pro

Hi. I was wondering if there was anyway that I could get my Dell E173FP monitor to sleep when I close the lid to my macbook pro. I do not have it on mirroring mode. When I close the lid to my laptop it will just switch my desktop to the monitor instead of the monitor going to sleep with my macbook. When I press the power button and click sleep or go to the apple menu and click sleep it will work though. This really irritates me and I would like It to sleep when I close the lid instead of having to do more. Please help.

Sounds like the system is going into Clamshell mode. Here's some info on that mode.
One workaround would be to disconnect line voltage as that's required for clamshell mode, there may be others.
http://support.apple.com/kb/HT3131
Regards,
Captfred

PowerBook G4 not going to sleep when closed???

My 15-inch 1.67 GHz PowerBook doesn't go to sleep when closed. The Apple on the back on the display stays lit and the display doesn't go dark either. Anyone have any ideas???

Check that your sleep magnet hasn't fallen. Take something made of steel like a paperclip, and see if it sticks to the outside of the case above the Apple logo. If not, the magnet inside may have moved. When the cover is closed, the magnet is directly over and affects the trackpad area. If you have a magnet (like on your refrigerator), wave it over the trackpad and it should go to sleep.

Not going to sleep when I close the lid

Hi there,
My MacBook Pro is just about 6 months old, I just got it back from an Apple Servicecentre. They exchanged my keybord and total unibody because my enterkey didn't work properly, it was entirely done under guarantee.
But now, when I close my lid, it doesn't go into sleepmode... I used to have no problem with that. Do I have to change something in the settings?
Thanks for the help,
Iris

Do a #1 SMC and #2 PRAM reset, if that doesn't fix it then yes, take it back
Step by Step to fix your Mac

WinXP AD users can't connect via SMB

Server is an Intel Xserve, 10.5.8.
Windows users get authentication errors when attempting to connect via SMB on the Mac server. The server is bound to Active Directory, and the Mac users are able to connect via AFP just fine. Macs also cannot connect via SMB. I get the error message "NTSTATUS_WRONGPASSWORD" when the user attempts to log in.
Local users are able to connect via SMB, but I don't want to re-enter a dozen or so PC users on this server if I can avoid it.
In the /var/db/smb.conf file there is an entry for a password server that may not be correct, but if I change it to the password server I've been instructed to use, the file flips back to the original setting when I stop and start the SMB service. I think if I make changes to the /etc/smb.conf file outside the END section, where the comments say to make changes, they will carry over to /var/db/smb.conf, but I'm not sure of the syntax.
If you need me to post the testparm output I can do that.

You're going to have to look into potential underlying issues.
I don't know what's happened for you, but I have an identical type setup for a client done over a year ago and no such problems have occurred.
What does the UNEDITED (please !) result of (using the Terminal) the following show:
cat /Library/Preferences/edu.mit.Kerberos
What happens when a user can't connect (error message, loginwindow shake) ? Are all client machines & the server using a common (eg internal) time-server ?
Be sure to see http://docs.info.apple.com/article.html?artnum=300765
And certainly read through Bombich' excellent PDF (click on the icon of it) at
http://www.bombich.com/mactips/activedir.html - esp. the troubleshooting section
for when a user is unable to login.
Currently, I'm not able to check/verify the settings for any of the servers I've setup for clients in a "magic triangle" setting. I'm not certain about the "passwordserver" entry,
on the one hand the actual passwordserver is actually part of

Mavericks 10.9-10.9.1 bug/issue/problem: external drives connected through thunderbolt or firewire are not put to sleep when iMac goes to sleep

Previous to Mavericks (10.9 - 10.9.1) I've had no issues with external firewire or thunderbolt connected drives to be put to sleep. However, since Mavericks all of my external drives are not put to sleep when my iMac, or Mac Pro go to sleep.
How can a company such as Apple, pushing people to have external devices like hard drives, is not on top of fixing this issue? Apple pushed for firewire and thunderbolt, thus All external drives I've owned are firewire. Because of speed. I bought thunderbolt adapters for firewire, and before Mavericks all worked great. Now that we have 10.9.1 update, this is still an issue!
I'm aware of the temporary solution of connecting the drive through USB to make it work, this is not a solution, but a hack.
Please let Apple know that this is a known issue, and there should be a fix for it. Everyone's data depends on it! Not only current external backups, but also external sensitive hard drives we rely on. Currently, the following makes are experiencing this issue: Lacie, OWC (Elite Pro), WD, Promise, Seagate, Toshiba, G-Drive.
Other Apple Support Communities related thread:
https://discussions.apple.com/thread/5486167?start=60&tstart=0
https://discussions.apple.com/message/23541363
External References:
http://blog.macsales.com/21004-upgrade-to-mavericks-drama-free-with-owc
http://forums.macrumors.com/showthread.php?t=1659332&page=3
If anyone finds how to solve this issue, please help by posting the steps or solution.

Same 2 issues with 10.9.3:
External FireWire drive WILL NOT spin down when Mac goes to sleep.
also
External FireWire drive WILL NOT spin down for inactivity despite “Put hard disks to sleep when possible” is checked in energy saver.
This has been going on since the launch of Mavericks and no solution found yet.
USB ports work normally.

MacBook Pro does not go to sleep when power cord is connected

Hi Experts,
I have recently discovered that my MacBook Pro (2009) with OSX Lion does not go to sleep when the power cord is connected. It does not matter if I close the lid or select sleep from the Apple menu. All that happens is that the screen is powered off, the SIL is solid and I can hear the HDD/fan. I have not changed any of my power settings recently and it has not been a problem previously. If I disconnect the power cord the MB goes to sleep as supposed to (the SIL led starts flashing).
Doing some research I have found other users with somewhat the same issues when VMWare Fusion is installed. I have done some further testing and it seems that if I disable the virtual machine's Network Adapter and quit VMWare Fusion the MB goes into sleeping mode when the lid is closed even with the power cord connected. Enabling the Network Adapter again prevents the MB to go into sleeping mode when the power cord is connected. This even applies when the VMWare application is shutted down.
My guess is that the Network Adapter somehow prevents the MB to go into sleeping mode. The workaround is of course toggling the Network Adapter on and off but the virtual machine has to be running in order to do so. Not being that familiar with network settings on a Mac is there any other way to get around the problem?
Thanks in advance :-)

To anyone,
I have turned internet sharing off but the Ethernet box remains checked. If I uncheck the Ethernet box, the Internet Sharing bubble turns red, however when I close System Preferences and re-open, the box is automatically checked although Internet Sharing is off. Because of this my Macbook Pro will not sleep properly.
All other sharing items are turned off. Only Internet Sharing continues to automatically show Ethernet as active from a Wi-Fi connection.
Any advice?

My computer can not recognize the new Apple iPod touch when it is connected via the USB cable (that goes with it) attempt to attach it to the computer.

My computer can not recognize the new Apple iPod touch when it is connected via the USB cable (that goes with it) attempt to attach it to the computer.

You do have iTunes installed right?
See:
iOS: Device not recognized in iTunes for Windows

Monitor Not Going To Sleep on Mac Mini Server With Lion

Summary: I am attempting to configure a Mac Mini Server that runs OS X Lion. This machine was originally shipped with OS X Lion; it is not an upgrade. My current specific problem is that my Viewsonic VX2835wm monitor will not go to sleep when the minutes setting on the Display Sleep setting for Energy Saver has been reached. Instead, the screen goes blank for a couple of seconds and is replaced with a blank blue backlit monitor. (Ironcially, the display sleep menu cautions: "Never letting your display go to sleep may shorten its life".) I very much want and need the ability to have my monitor go to sleep so as to save energy and to extend the monitor's life for as long as possible.
Additional Background: I have had a couple of calls with Mac support and they have been unable to tell me whether this is a "design feature" or a flaw in the Lion OS because they have had no similar reports and they do not have the latest hardare available running Lion Server to test to see if this happens with other monitors. (They also, of course, don't have the VX2835wm monitor.)
I do, however, know the following:
(1) My HDMI monitor is connected to my Mac mini via a DVI KWM switch (ATEN CS1784) such that the HDMI output from my Mac is converted to DVI (using the DVI to HDMI converter that came with my Mac Mini) and is then run through the KVM and then converted back to HDMI (using a full pin DVI to HDMI cable). However, I have tested the monitor with a straight HDMI to HDMI cable running directly from the Mac Mini to the monitor and it has not changed anything.
(2) The Lion operating system correctly recognizes (in Hardware / Displays) the model of my ViewSonic monitor.
(3) I have a MacBook Pro running Leopard (OS X 10.5.8) that is connected to the same monitor through the same KVM switch (by way of a BookEndz docking station) which properly shuts down the monitor when there has been no activity for however many minutes are set in the Display Sleep setting under Energy Saver. (Indeed, all I want is the same functionality on my Mac Mini that I have enjoyed for the last two years with this MacBook Pro.)
(4) When fully connected to the KVM, if I switch from my Mac Mini to my MacBook Pro and my Mac Mini display goes to sleep while I am working on my MacBook Pro, when I switch back to the Mac Mini, my monitor backlight will be off (and the power light will be standby yellow rather than the blue on) until I wake my computer up by touching the mouse of keyboard. I wonder if this may mean that the Mac Mini's signalling of the change in status from on to standby is somehow dysfunctional.
(5) Shutting down the server functions (and other open applications) has no effect.
I would greatly appreciate feedback from anyone out there running a Mac Mini with Lion regarding whether or not their monitors go into standby mode when the Display Sleep time is reached (please note whether or not you are running the Server or Client version, whether or not it is a new install or upgrade, and what monitor you are using).
Thanks in advance to anyone who can help.

No, I didn't solve the problem. The monitor still goes to sleep with WIndows but not with my Mac Mini. About 8 months ago I basically wore out the power switch on my monitor so I bought a wireless power switch to shut it off at the outlet. The VX2835wm monitor itself is now starting to fail as well-- a couple of times it's gone through a weird sequence of flashing screen colors on power up and ended up in an overscan mode (that took me for ever to figure out how to fix). I have decided to replace my VX2835wm with a Dell u2412m once it fails for good partly because I really want to keep the 16:10 resolution (very hard to find these days) and partly because I want to see if a different make of monitor will go to sleep properly based upon my Mac Mini power down settings.

MacBook Pro goes to sleep when copying files from attached drives

I have noticed that since installing Yosemite my MacBook Pro goes to sleep when it is in the middle of copying a large number of files. When I wake it up the copying continues.
I have also noticed that when I am watching videos from my shared iTunes library on an Apple TV the video will stop after about 15 minutes and the connection to the library is lost because the MacBook Pro has gone to sleep. When woken up then access to the library is restored but I need to reselect the movie and then resume.
I have changed the power saving options to do not let drives sleep when idle and do not sleep laptop.
Anyone else have any experience of this or better still a fix.
Thanks in advance.

I have just found that if I turn off the display sleep in the power settings then the problem is resolved. It means though that the screen on my MacBook Pro is on all the time albeit with a screen saver.

Problems since 1.4 Worsen (including display not going to sleep)

I've had my Pre device (under Sprint's service) since it launched and have had intermintent problems that have all seemed to fix themselves throughout the software updates. However, things seem to be getting worse and increasingly frustrating since the latest 1.4 OS, and I'm surprised not more people are having the same problems. For me, they are:
1. Frequent "too many cards in use" error messages when no applications are in use. This issue has been posted for earlier OS versions and the only solution seems to be rebooting.
2. The volume adjust bar shows up randomly and frequently when not pressing the volume adjust up/down buttons on the side.
3. And the worst, which prompted the desperation for this post is that today my screen would not go to sleep when pressing the power button as usual. My device seems to literally be going haywire and frequently either appears as if a ghost is touching the screen with random things opening (like the date/time, pull down for turning on wi-fi, etc.) or the touchscreen will be completely unresponsive without some prompting by opening and closing the slider, or pressing the sleep button several times to "wake up the device". Needless to say, this is driving me crazy, and for all intents and purposes is making my phone unusable, especially since the screen won't sleep.
I'll probably take the time to go to a Sprint store for service, but wanted to see if anyone is having similar issues or may have solutions.

since 1.4 the "too many cards" & "memory critical" has gotten out of control. It even happens now when I turn on the phone & open one card. Usually within 2 minutes of me turning the phone on I have to restart it again sometimes twice. I hate this phone now. If Sprint has a comparable Android phone when it's time for me to upgrade I'm gone, unless Palm announces a better phone when Sprint annouces the early Summer lineup. I can see why the stock for PLM is rapidly declining, I can't blame the holders for leaving. My previous palm devices were great, this is a HUGE DISAPPOINTMENT!
i've been having the same issues myself including intermittent connections to BT headset, or even being able to use speakerphone when BT connection keeps disconnecting. You're absolutely correct when discibing the symptoms as if a ghost is playing on your screen. I sit & watch my phone going through at least every 4 minutes I keep the screen on. I can't even do any other tasks on the phone while i'm taking to someone because the phone hangs up on them if the screen is still on less than a minute. I've talked to Sprint about this 4 times they keep treating it like it's not that a big deal.transferred me to Asurion once they kept acting like what was happing was my fault. Then told me they would send me another phone if I pay a $100 duductible, problem,this is my 2nd Pre & it's a refurb. I need a NEW one if I have to pay another $100 for a 3rd one. Palm should pay if I have to get another refurb. I talked to Palm about it the rep told me I would have to send the phone in for repairs & could take up to 3 weeks for me to get it back. I don't want the same phone back, i need a new one. It's not cool to ask for someone's phone & not send a replacement.

Not going to sleep when PC is connected via SMB

Similar Messages

Maybe you are looking for