Not happy using two screens in Mavericks. If I leave an image spanning two screens half of the image disappears

Not happy using two screens in Mavericks. If I leave an image spanning two screens half of the image disappears.

So Apple really didn't fix the additional screen issues then, bummers.
The price of this feature is the loss of the aforementioned nerd-impressing ability to have windows that span multiple displays. In Mavericks, a window can span screens while being dragged, but it will appear partially transparent on the destination screen until the cursor touches the edge of the screen from which the window is being dragged, at which point the opaqueness will switch sides. Releasing the window mid-drag leaves it visible only on the screen where it's opaque.
http://arstechnica.com/apple/2013/10/os-x-10-9/11/#multiple-displays

Similar Messages

How do I get my bookmarks to display again in a column on the left of my screen, just as it always has and the way I like them. I do not want to use full screen display without the bookmarks showing.

I have a full screen and cannot see my bookmarks.
How do I get my bookmarks to display again in a column on the left of my screen, just as it always has and the way I like them. I do not want to use full screen display without the bookmarks showing.

View > Sidebar > Bookmarks (Ctrl+B)
Press F10 or tap the Alt key to bring up the "Menu Bar" temporarily.

Can i use two icloud accounts on the same computer?

can i use two icloud accounts on the same computer?

You can have content from two iTunes Store accounts in one library, and multiple libraries on a computer.
(98306)

TS2446 A email account that was used is now not in use and songs that were purchased and added are bound to this old account from the same computer how do I the purchaser of these songs reclaim the authorization to play and use in my new account

A email account that was used is now not in use and songs that were purchased and added are bound to this old account from the same computer how do I the purchaser of these songs reclaim the authorization to play and use in my new account. even though account name may have been changed.

Just authorize the computer and retreive them.
Go here -> https://iforgot.apple.com/cgi-bin/WebObjects/DSiForgot.woa/wa/iforgot .
FYI: you should have simply updated the AppleID with new info and continued to use it instead of creating a new one.

Can I use two separate computers with the same adobe ID. I want to update my kobo from either unit

Can I use two separate computers with the same adobe ID. I want to update my kobo from either unit

I doubt it is possible to run two instances of iTunes on the computer at the same time. To do so would require two users to be signed in and running iTunes under each user.
The better solution would be to either clean up and merge the two libraries or have iTunes running on a second computer.

Can you use two iPod's on the same computer?

I currently have an iPod Video, and my mother wants to get a shuffle or nano. The problem is, we only have one computer that will let iTunes run. Is it possible to use two iPods on the same computer, or even with the same iTunes?

See these articles about using more than one iPod on one computer, and with either one or more iTunes libraries.
Multiple iPod installations.
How to use multiple iPods with one computer.
If you have the latest iTunes, an easy way to create a new library is to hold down the 'alt' key whilst opening iTunes (for Macs), or hold down the 'shift' key (for Windows).
This will give you the option of either using the current iTunes library or creating a new one.
There are various methods of transferring different songs to different iPods with a single iTunes library.
One is to manage the songs manually.
With this setting, you can drag and drop songs/playlists etc onto the iPod from iTunes, and also delete and/or edit songs which are currently on the iPod without affecting the iTunes library.
If you wish to keep the convenience of automatic sync, then you could set the iPods to sync with "selected playlists". This setting can be found in the iPod summary screen under the 'music' tab. With this setting, different playlists can be transferred and later deleted from each iPod without affecting any playlists stored in iTunes or the playlists on the other iPods.
Also, on the 'summary' main page you will see the option to "only sync checked items". With this setting selected, if you remove the check marks from any songs in iTunes, they will not be transferred to the iPod. You can restore the check mark if you want to put the songs back on the iPod at a later date.
Be aware that when playing songs in iTunes, any songs that do not have a check mark against them will be skipped over and will not be played.

Can I use two gmail addresses via the same Mail account?

Please help! My brain is fried. I have two email addresses: one is a regular gmail one, the other uses my own domain but it's gmail too. I currently have both set up on Mail on my Mac. I receive and send from both. But I really want to have both working through one account (this is mainly to simplify the very clever Sanebox tool on both my Mac and in the Mailbox app on my iPhone).
If I forward my domain email to my regular gmail then I can receive them all in one fell swoop. Which is fine. But can I then continue to send from both accounts? Is this what they mean by an 'alias'? It's really important that I can send from both.
Sanebox suggested this: http://support.apple.com/kb/TA23485. I'm not sure I really understand it and don't want to risk changing my settings yet in case it all goes wrong.
Thank you very much!

If you're asking whether you can connect one device to two itunes store accounts, the answer is no.

I am not able to install screen-git from the aur

So yeah, i cant install screen-git from the aur. Im using yaourt.
┌─[yamifrankc]──(~)
└─| % > aur -S screen-git
==> Resuming previous build
==> Downloading screen-git PKGBUILD from AUR...
tar: Record size = 13 blocks
==> Last 5 comments ordered by date (asc):
Comment by: dolby on Tue, 16 Jun 2009 15:02:25 +0000
GNU screen shouldnt depend on libelf. Package in extra now doesnt.
See http://bugs.archlinux.org/task/14700
Comment by: dolby on Tue, 16 Jun 2009 15:03:08 +0000
Oh yeah, gpm isnt a dependency either.
Comment by: nihathrael on Tue, 16 Jun 2009 16:23:56 +0000
Thanks for the pointers. Package updated.
Comment by: firecat53 on Tue, 16 Jun 2009 23:19:28 +0000
At least for x86_64, libelf seems to be a dependency. Throws an error about libelf.so.0 when starting screen if it's not installed.
Comment by: Ranguvar on Sun, 11 Oct 2009 04:00:10 +0000
The three lines at the end of the install scriplet are unnecessary now and can cause problems apparently, please remove :)
Also, I cannot confirm libelf dependency, both by using ldd and trying removing libelf, so it should be kept out.
First Submitted: Sun, 09 Nov 2008 15:43:42 +0000
screen-git 20090616-1 : GNU Screen from GIT repository. Provides vertical splitting.
( Unsupported package: Potentally dangerous ! )
==> Edit the PKGBUILD (highly recommended for security reasons) ? [Y/n]("A" to abort)
==> ----------------------------------------------
==>n
==> screen-git dependencies:
- ncurses (already installed)
- shadow (already installed)
- git (already installed)
- automake (already installed)
- autoconf (already installed)
==> WARNING: This PKGBUILD contains install file that can be dangerous.
screen.install
==> Edit screen.install (highly recommended for security reasons) ? [Y/n] ("A" to abort)
==> ----------------------------------------------
==>y
Please add EDITOR to your environment variables
for example:
==> Edit PKGBUILD with:(replace gvim with your favorite editor)
==> Edit screen.install with:vim
==> WARNING: This PKGBUILD contains install file that can be dangerous.
screen.install
==> Edit screen.install (highly recommended for security reasons) ? [Y/n] ("A" to abort)
==> ----------------------------------------------
==>n
==> Continue the building of screen-git ? [Y/n]
==> ----------------------------------------------
==>y
==> Install or build missing dependencies for screen-git:
==> Building and installing package
mkdir: cannot create directory `/var/abs': Permission denied
==> WARNING: Unable to write in /var/abs/local/yaourtbuild/screen-git directory. Using /tmp directory
==> screen-git dependencies:
- ncurses (already installed)
- shadow (already installed)
- git (already installed)
- automake (already installed)
- autoconf (already installed)
==> Determining latest git revision...
-> Version found: 20091204
==> Making package: screen-git 20091204-1 i686 (Fri Dec 4 07:43:16 CST 2009)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
-> Found screen.pam in build dir
==> Validating source files with md5sums...
screen.pam ... Passed
==> Extracting Sources...
==> Removing existing pkg/ directory...
==> Entering fakeroot environment...
==> Starting build()...
==> Connecting to GIT server....
Already up-to-date.
==> The local files are updated.
==> GIT checkout done or server timeout
==> Starting make...
autoheader: WARNING: Using auxiliary files such as `acconfig.h', `config.h.bot'
autoheader: WARNING: and `config.h.top', to define templates for `config.h.in'
autoheader: WARNING: is deprecated and discouraged.
autoheader:
autoheader: WARNING: Using the third argument of `AC_DEFINE' and
autoheader: WARNING: `AC_DEFINE_UNQUOTED' allows one to define a template without
autoheader: WARNING: `acconfig.h':
autoheader:
autoheader: WARNING: AC_DEFINE([NEED_FUNC_MAIN], 1,
autoheader: [Define if a function `main' is needed.])
autoheader:
autoheader: WARNING: More sophisticated templates can also be produced, see the
autoheader: WARNING: documentation.
configure: WARNING: unrecognized options: --with-sys-screenrc
this is screen version 4.1.0
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking how to run the C preprocessor... gcc -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking whether gcc needs -traditional... no
checking for library containing strerror... none required
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking minix/config.h usability... no
checking minix/config.h presence... no
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking for gawk... gawk
checking for a BSD-compatible install... /bin/install -c
configure: checking for buggy tools...
- sh is 'GNU bash, version 4.0.35(2)-release (i686-pc-linux-gnu)'.
- sed is 'GNU sed version 4.2.1'.
checking if a system-wide socket dir should be used... yes
checking for the socket dir... (eff_uid ? "/tmp/uscreens" : "/tmp/screens")
configure: checking for MIPS...
configure: checking for Ultrix...
configure: checking for butterfly...
configure: checking for POSIX.1...
- you have a POSIX system
configure: checking for System V...
configure: checking for sequent/ptx...
configure: checking SVR4...
checking stropts.h usability... yes
checking stropts.h presence... yes
checking for stropts.h... yes
checking for string.h... (cached) yes
checking for strings.h... (cached) yes
configure: checking for Solaris 2.x...
configure: checking BSD job jontrol...
- you have jobcontrol
configure: checking setresuid...
configure: checking setreuid...
configure: checking seteuid...
configure: checking select...
configure: checking fifos...
- your fifos are usable
configure: checking for broken fifo implementation...
- your implementation is ok
configure: checking sockets...
- your sockets are usable
configure: checking socket implementation...
- you are normal
- both sockets and fifos usable. let's take sockets.
configure: checking select return value...
- select is ok
configure: checking for tgetent...
configure: checking libcurses...
- you use the terminfo database
configure: checking ospeed...
configure: checking for /dev/ptc...
configure: checking for SVR4 ptys...
checking for getpt... yes
configure: checking for ptyranges...
configure: checking default tty permissions/group...
checking for write... /usr/bin/write
checking for xterm... /usr/bin/xterm
- pty mode: 0620, group: 0
configure: checking getutent...
configure: checking ut_host...
checking utempter.h usability... no
checking utempter.h presence... no
checking for utempter.h... no
configure: checking for libutil(s)...
configure: checking getloadavg...
assuming posix signal definition
configure: checking for crypt and sec libraries...
configure: checking crypt...
configure: checking IRIX sun library...
configure: checking syslog...
configure: checking wait union...
configure: checking for termio or termios...
configure: checking getspnam...
configure: checking getttyent...
configure: checking fdwalk...
configure: checking whether memcpy/memmove/bcopy handles overlapping arguments...
checking for long file names... yes
checking for vsprintf... yes
checking for dirent.h that defines DIR... yes
checking for library containing opendir... none required
checking for setenv... checking for nl_langinfo(CODESET)... yes
checking for library containing gethostname... none required
checking for rename... yes
checking for fchmod... yes
checking for fchown... yes
checking for strerror... yes
checking for lstat... yes
checking for _exit... yes
checking for utimes... yes
checking for vsnprintf... yes
checking for getcwd... yes
checking for setlocale... yes
checking for strftime... yes
checking for PAM support... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating doc/Makefile
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing default commands
configure: WARNING: unrecognized options: --with-sys-screenrc
Now please check the pathnames in the Makefile and in the user
configuration section in config.h.
Then type 'make' to make screen. Good luck.
CPP="gcc -E -DETCSCREENRC='"/usr/etc/screenrc"' -DSCREENENCODINGS='"/usr/share/screen/utf8encodings"'" srcdir=. sh ./osdef.sh
AWK=gawk CC="gcc -march=i686 -mtune=generic -O2 -pipe" srcdir=. sh ./comm.sh
gcc -c -I. -I. -DETCSCREENRC='"/usr/etc/screenrc"' -DSCREENENCODINGS='"/usr/share/screen/utf8encodings"' -DHAVE_CONFIG_H -DGIT_REV=\""`git describe --always 2>/dev/null`"\" \
-march=i686 -mtune=generic -O2 -pipe screen.c
gcc -c -I. -I. -DETCSCREENRC='"/usr/etc/screenrc"' -DSCREENENCODINGS='"/usr/share/screen/utf8encodings"' -DHAVE_CONFIG_H -DGIT_REV=\""`git describe --always 2>/dev/null`"\" \
-march=i686 -mtune=generic -O2 -pipe ansi.c
gcc -c -I. -I. -DETCSCREENRC='"/usr/etc/screenrc"' -DSCREENENCODINGS='"/usr/share/screen/utf8encodings"' -DHAVE_CONFIG_H -DGIT_REV=\""`git describe --always 2>/dev/null`"\" \
-march=i686 -mtune=generic -O2 -pipe fileio.c
gcc -c -I. -I. -DETCSCREENRC='"/usr/etc/screenrc"' -DSCREENENCODINGS='"/usr/share/screen/utf8encodings"' -DHAVE_CONFIG_H -DGIT_REV=\""`git describe --always 2>/dev/null`"\" \
-march=i686 -mtune=generic -O2 -pipe mark.c
gcc -c -I. -I. -DETCSCREENRC='"/usr/etc/screenrc"' -DSCREENENCODINGS='"/usr/share/screen/utf8encodings"' -DHAVE_CONFIG_H -DGIT_REV=\""`git describe --always 2>/dev/null`"\" \
-march=i686 -mtune=generic -O2 -pipe misc.c
gcc -c -I. -I. -DETCSCREENRC='"/usr/etc/screenrc"' -DSCREENENCODINGS='"/usr/share/screen/utf8encodings"' -DHAVE_CONFIG_H -DGIT_REV=\""`git describe --always 2>/dev/null`"\" \
-march=i686 -mtune=generic -O2 -pipe resize.c
gcc -c -I. -I. -DETCSCREENRC='"/usr/etc/screenrc"' -DSCREENENCODINGS='"/usr/share/screen/utf8encodings"' -DHAVE_CONFIG_H -DGIT_REV=\""`git describe --always 2>/dev/null`"\" \
-march=i686 -mtune=generic -O2 -pipe socket.c
In file included from socket.c:51:
extern.h:159: error: conflicting types for 'execvpe'
/usr/include/unistd.h:585: note: previous declaration of 'execvpe' was here
make: *** [socket.o] Error 1
==> ERROR: Build Failed.
Aborting...
Error: Makepkg was unable to build screen-git package
Vertical split is ftw! What can i do to build it?

yeah, i also got that message.
for vertical split you can go for screen-vs package. this is screen with the vs patch.
http://aur.archlinux.org/packages.php?ID=6006

Do you recommend using a screen protector with the new ipad?

I just got an ipad with retina display. I am wondering if I need to get a screen protector for it?

A screen protector can also significantly degrade the touch screen experience. I know one very talented sketch artist you does some amazing art on her iPad and she says she cannot do it on anything but a naked iPad screen as otherwise the screen looses too much sensitivity.
They also make most stylus work poorly too, for the same reason (I use a stylus a lot with NoteShelf and Note Anytime for work stuff, and a screen protector really interfers with it).
Just to warn you that, depending on how you use it and the type of apps you use, you may find them more or a problem then a solution to anything.

Cannot use two iSight cameras at the same time

I use an external display on my laptop. Close the lid and work on the external display. I connect an external iSight, and a message says that the camera is already in use?!
Can I not use two iSights at the same time?

Hello Webmaster
You can have two iSights connected at one time, but, as explained in Apple's iSight "Your camera is in use by another application" message, iSight can be used by one application at a time. (my emphasis) Check for any running applications, Login Items, or widgets that can use your iSight. (It is easy to forget widgets like Mirror in your Dashboard.)
Different apps select between multiple connected cameras in different ways. For instance, you use iChat > Preferences... > Video settings to select which camera to use, but iMovie 6 uses a drop-down menu as shown in this picture:
The suggestions in How to Troubleshoot iSight should help you determine whether one of your iSights is causing trouble. I suggest you test each one separately and without your external display or other peripherals to rule out possible conflicts like the one that user BombCreative reports in his post at http://discussions.apple.com/message.jspa?messageID=5868843#5868843
After you are certain that your iSights are working individually, test them when both are connected. After your system successfully passes these tests, you can add your external devices back one-by-one to be sure one of them is not causing the problem.
EZ Jim
PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.1) External iSight

Using two network connections at the same time?

Dears,
I have two available Internet connections:
1- a DSL connection which I'm connected with AirPort to,
2- and a 3G USB modem connection (Huawei E156G if you need to know) which I setup through Network Preferences.
Can I specify anywhere which connection an application should use at a given time, or all the time?
For instance,
a- Safari and Mail should use exclusively (or at first try) the AirPort connection,
b- and iGetter (for faster downloads) should use the 3G connection
Let me point out that I setup the 3G modem in Network Preferences (and that's the way I connect to it).
By the way, if someone has trouble (which I had) setting up the Huwaei E156G on Snow Leopard, I can help.
Thanks in advance for any help.
Abdelaziz

By default, the top-most service in the Network preferences gets the internet connection. All internet related traffic is sent on that interface.
As far as using both for internet at same time, I'm not sure how to do that. You might search for setting up routes. Routes in the network tell it to send certain things to a certain interface, but I don't know how to differentiate a download from web surfing, etc.
You might also want to try posting that question on the [Unix|http://discussions.apple.com/forum.jspa?forumID=735] forum.
Message was edited by: Barney-15E

Can't use two i-pods on the same computer

I recently bought a new Gateway with Windows Vista after my first computer completely died. I hooked up my i-Pod, authorized the new computer but had to back up using my back up CDs. However, all went well.
I thought I would be able to do the same thing when I hooked my Dad's i-Pod up. Instead my songs show up in the library when his i-Pod is hooked up. His songs show up in the music folder that appears directly under devices, with his i-Pod clearly listed as the device.
I tried hooking up his i-Pod under a different account and the same thing happens. I-Tunes won't let me backup his music.
Any clues about how to get out of this mess?

Yes. Each iPod maintains its own preferences:
Using two iPods with One Computer and check this link out: Natalie Beresford, "Multiple iPods/iTunes Installations", 04:04am Nov 26, 2004 CDT
JC

Bought a Mac Mini. at 18 day's old it started to lock up and not function. Took it in and they wiped and reinstalled it. Well at 24 day's old it's been sitting in the box not being used. First and last Mac for me. But can I get something for the junk?

I have pulled it out of the box and put 2 Mac approved mem sticks in it to boost it to 8 Gigs mem and it still locks up and freazes.. So many people told me Mac was the way to go... 1500 dollers could have bought me a great pc laptop. Now I have a wirless mouse keyboard and a mac mini (aka Brick) that allowed me to donate money to a cause that is helping buildings and companies out side of the US. While I have junk.. It's still under warranty and I reinstalled the os after the new mem sticks. Again.. locks up and does nothing. What can I do with this? Toss it in the trash? Any info on what I might do with it.. Please help!

It would be most helpful if you updated your system information:
Please reconcile the following
at 18 day's old it started to lock up and not function. Took it in and they wiped and reinstalled it. Well at 24 day's old it's been sitting in the box not being used.
... I reinstalled the os after the new mem sticks.
If your Mini is anything less than six months old it would be running Lion, not 10.6.1, nor would it have been necessary to "reinstall the OS". Any help that anyone can provide is predicated on your system configuration so it's important.
If you are running Lion then boot your Mini while holding the D key. This will load Apple Hardware Test which will enable you to test your memory. "Mac approved" memory is sort of vague, and even memory that is allegedly designed to meet your Mini's specification may fail. There few reputable memory vendors.
"Apple installed" memory is more meaningful, and indicates Apple has tested it and guarantees its function. Otherwise all bets are off with a claim of "Mac approved". You will have to verify that yourself with Apple Hardware Test.
If your Mini was running, or ever ran OS 10.6.1 for that matter, it is close to three years old.
You must clear up these uncertainties before anyone can help.

I have an Apple Ipad Air. I'm trying to use two bluetooth earphones at the same time. Can it be done?

I have an Apple Ipad Air. I'm trying to use two bluetooth earphones at one time. Only one works at a time. Can two be used at the same time? If so how do I get them to work?

The likely reason no one can connect to the mini when it is connected to your work VPN has more to do with your work than your home set up. The administrator at work would have to decide to allow for "split-tunneling", thereby allowing your mac to be connected to work and the outside world simultaneously.
More here: http://en.wikipedia.org/wiki/Split_tunneling
Talk to the network admin at work.

How to calculate the ratio between the maximum and minimum peaks of the two waves using two looping to find the value of SPO2?

hello everyone,
i'm rai from indonesia
I have a final project about pulse oximetriy, I have some problems,
how to calculate the ratio between the maximum and minimum peaks of the two waves using two while loops to calculate SpO2 ?
My program image can be seen below predicament ?
Attachments:
spo2 akusisi data with filter lpf hpf smoot nilai max min ir merah.vi ‏249 KB
spo2 akusisi data with filter lpf hpf smoot nilai max min ir merah.vi ‏249 KB

Hi rai,
I would appreciate it as kind of respect for forum participants if you would clean up your VI before uploading it (or images of its block diagram)…
That being said:
- Your inner while loops each run exactly twice. Replace them with FOR loops!
- Lots of unneeded operations, mainly induced by ExpressVI usage. Is there a reason to convert to DDT and immediately convert back to 1D array?
- You already calculate some Min/Max values. Ratio is just a division of two values…
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Not happy using two screens in Mavericks. If I leave an image spanning two screens half of the image disappears

Similar Messages

Maybe you are looking for