Not In Service?!

This is a major inconvenience. The main reason I switched to a copper line phone service is a work related decision. Now my phone service is not working how am I supposed to work?! I went through the automated process and told the technician will be dispatched on Wednesday. Why do I have to wait?!!! My phone was working last night.
I used my cell to call my house to see what's going on and got the "not in service" message.

Hi,
I am also facing the same problem. I am unable to find my BO is service browser. let me know if you have found the solution.
Thanks,
Soujanya

Similar Messages

"A technical error during invocation : Could not invoke service reference" Error message while calling a service from BPM

Hi Experts,
We are facing a issue while calling a Automated activity from BPM process, the process gets suspended and the BPM logs says "Process XYZ suspended, A technical error during invocation: Could not invoke service reference name fdhueoegghejietyhsjk6886 Component name ABC " We have already checked the mapped service reference and provider system. Gone through the below link, but no help.
http://http://wiki.scn.sap.com/wiki/display/TechTSG/Sending+a+message+from+SAP+NetWeaver+BPM+process+to+PI+fails+via+automated+activity?original_fqdn=wiki.sdn.sap.com
Any pointers or suggestions to fix up this issue will be highly appreciated. Thanks in advance.
Regards,
Mohit Jaju

The details/ID in NWDS Service Reference must exactly match the SOA configuration. Sometimes it's possible you have changed the reference or the group itself and something changed to become mismatched.
It's possible they don't match - but the SG itself will show green in NWA since the service exists and responds on the target system. Does the ID listed in the error match what is shown in the NWDS project?
regards, Nick

Error: Could not start Service[keystone]: Execution of '/sbin/service openstack-keystone start' returned 1: Starting keystone: [FAILED]

I'm using Oracle Linux 6u6. While I'm installing openstack ( 2 node set up) using packstack, I'm getting this error:
Applying 10.245.33.37_cinder.pp
10.245.33.37_keystone.pp:                         [ ERROR ]
Applying Puppet manifests                         [ ERROR ]
ERROR : Error appeared during Puppet run: 10.245.33.37_keystone.pp
Error: Could not start Service[keystone]: Execution of '/sbin/service openstack-keystone start' returned 1: Starting keystone: [FAILED]
You will find full trace in log /var/tmp/packstack/20150327-100335-ltC8Ic/manifests/10.245.33.37_keystone.pp.log
Please check log file /var/tmp/packstack/20150327-100335-ltC8Ic/openstack-setup.log for more information
Additional information:
* A new answerfile was created in: /root/packstack-answers-20150327-100336.txt
* Time synchronization installation was skipped. Please note that unsynchronized time on server instances might be problem for some OpenStack components.
* Did not create a cinder volume group, one already existed
* File /root/keystonerc_admin has been created on OpenStack client host 10.245.33.37. To use the command line tools you need to source the file.
* To access the OpenStack Dashboard browse to http://10.245.33.37/dashboard .
Please, find your login credentials stored in the keystonerc_admin in your home directory.
Packages:
[root@slcai461 ~]# rpm -qa|grep keystone
python-keystoneclient-0.9.0-5.el6.noarch
python-keystone-2014.1.3-2.el6.noarch
openstack-keystone-2014.1.3-2.el6.noarch
[root@slcai461 ~]# rpm -qa|grep packstack
openstack-packstack-puppet-2014.1.1-0.12.dev1068.0.4.el6.noarch
openstack-packstack-2014.1.1-0.12.dev1068.0.4.el6.noarch
Log :
[root@slcai461 ~]# cat /var/tmp/packstack/20150327-100335-ltC8Ic/manifests/10.245.33.37_keystone.pp.log
Warning: Config file /etc/puppet/hiera.yaml not found, using Hiera defaults
Warning: Scope(Class[Keystone]): The sql_connection parameter is deprecated, use database_connection instead.
Warning: Scope(Class[Keystone]): token_format parameter is deprecated. Use token_provider instead.
Warning: Scope(Class[Keystone::Endpoint]): The public_address parameter is deprecated, use public_url instead.
Warning: Scope(Class[Keystone::Endpoint]): The internal_address parameter is deprecated, use internal_url instead.
Warning: Scope(Class[Keystone::Endpoint]): The admin_address parameter is deprecated, use admin_url instead.
Warning: Scope(Class[Nova::Keystone::Auth]): The cinder parameter is deprecated and has no effect.
Notice: Compiled catalog for slcai461.us.oracle.com in environment production in 1.60 seconds
Warning: The package type's allow_virtual parameter will be changing its default value from false to true in a future release. If you do not want to allow virtual packages, please explicitly set allow_virtual to false.
   (at /usr/lib/ruby/site_ruby/1.8/puppet/type.rb:816:in `set_default')
Notice: /Stage[main]/Keystone/Keystone_config[DEFAULT/admin_token]/value: value changed '[old secret redacted]' to '[new secret redacted]'
Notice: /Stage[main]/Keystone/Keystone_config[database/connection]/value: value changed '[old secret redacted]' to '[new secret redacted]'
Notice: /Stage[main]/Keystone::Db::Sync/Exec[keystone-manage db_sync]: Triggered 'refresh' from 3 events
Notice: /Stage[main]/Keystone/Exec[keystone-manage pki_setup]: Triggered 'refresh' from 2 events
Error: Could not start Service[keystone]: Execution of '/sbin/service openstack-keystone start' returned 1: Starting keystone: [FAILED]
Wrapped exception:
Execution of '/sbin/service openstack-keystone start' returned 1: Starting keystone: [FAILED]
Error: /Stage[main]/Keystone::Service/Service[keystone]/ensure: change from stopped to running failed: Could not start Service[keystone]: Execution of '/sbin/service openstack-keystone start' returned 1: Starting keystone: [FAILED]
Notice: /Stage[main]/Keystone::Service/Service[keystone]: Triggered 'refresh' from 5 events
Notice: /Stage[main]/Neutron::Keystone::Auth/Keystone_service[neutron]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Neutron::Keystone::Auth/Keystone_service[neutron]: Skipping because of failed dependencies
Notice: /Stage[main]/Keystone::Roles::Admin/Keystone_tenant[admin]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Keystone::Roles::Admin/Keystone_tenant[admin]: Skipping because of failed dependencies
Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_service[nova_ec2]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_service[nova_ec2]: Skipping because of failed dependencies
Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_service[cinderv2]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_service[cinderv2]: Skipping because of failed dependencies
Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_service[novav3]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_service[novav3]: Skipping because of failed dependencies
Notice: /Stage[main]/Keystone::Roles::Admin/Keystone_tenant[services]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Keystone::Roles::Admin/Keystone_tenant[services]: Skipping because of failed dependencies
Notice: /Stage[main]/Neutron::Keystone::Auth/Keystone_user[neutron]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Neutron::Keystone::Auth/Keystone_user[neutron]: Skipping because of failed dependencies
Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_user[nova]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_user[nova]: Skipping because of failed dependencies
Notice: /Stage[main]/Glance::Keystone::Auth/Keystone_user[glance]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Glance::Keystone::Auth/Keystone_user[glance]: Skipping because of failed dependencies
Notice: /Stage[main]/Keystone::Roles::Admin/Keystone_role[admin]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Keystone::Roles::Admin/Keystone_role[admin]: Skipping because of failed dependencies
Notice: /Stage[main]/Glance::Keystone::Auth/Keystone_user_role[glance@services]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Glance::Keystone::Auth/Keystone_user_role[glance@services]: Skipping because of failed dependencies
Notice: /Stage[main]/Keystone::Endpoint/Keystone_service[keystone]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Keystone::Endpoint/Keystone_service[keystone]: Skipping because of failed dependencies
Error: Could not prefetch keystone_endpoint provider 'keystone': Execution of '/usr/bin/keystone --os-endpoint http://127.0.0.1:35357/v2.0/ endpoint-list' returned 1: An unexpected error prevented the server from fulfilling your request. (HTTP 500)
Notice: /Stage[main]/Keystone::Endpoint/Keystone_endpoint[RegionOne/keystone]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Keystone::Endpoint/Keystone_endpoint[RegionOne/keystone]: Skipping because of failed dependencies
Notice: /Stage[main]/Main/Keystone_service[cinder_v2]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Main/Keystone_service[cinder_v2]: Skipping because of failed dependencies
Notice: /Stage[main]/Main/Keystone_endpoint[RegionOne/cinder_v2]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Main/Keystone_endpoint[RegionOne/cinder_v2]: Skipping because of failed dependencies
Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/novav3]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/novav3]: Skipping because of failed dependencies
Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_service[cinder]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_service[cinder]: Skipping because of failed dependencies
Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_endpoint[RegionOne/cinder]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_endpoint[RegionOne/cinder]: Skipping because of failed dependencies
Notice: /Stage[main]/Glance::Keystone::Auth/Keystone_service[glance]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Glance::Keystone::Auth/Keystone_service[glance]: Skipping because of failed dependencies
Notice: /Stage[main]/Glance::Keystone::Auth/Keystone_endpoint[RegionOne/glance]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Glance::Keystone::Auth/Keystone_endpoint[RegionOne/glance]: Skipping because of failed dependencies
Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_user_role[nova@services]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_user_role[nova@services]: Skipping because of failed dependencies
Notice: /Stage[main]/Keystone::Roles::Admin/Keystone_user[admin]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Keystone::Roles::Admin/Keystone_user[admin]: Skipping because of failed dependencies
Notice: /Stage[main]/Keystone::Roles::Admin/Keystone_user_role[admin@admin]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Keystone::Roles::Admin/Keystone_user_role[admin@admin]: Skipping because of failed dependencies
Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_user[cinder]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_user[cinder]: Skipping because of failed dependencies
Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/nova_ec2]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/nova_ec2]: Skipping because of failed dependencies
Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_endpoint[RegionOne/cinderv2]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_endpoint[RegionOne/cinderv2]: Skipping because of failed dependencies
Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_service[nova]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_service[nova]: Skipping because of failed dependencies
Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/nova]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/nova]: Skipping because of failed dependencies
Notice: /Stage[main]/Neutron::Keystone::Auth/Keystone_user_role[neutron@services]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Neutron::Keystone::Auth/Keystone_user_role[neutron@services]: Skipping because of failed dependencies
Notice: /Stage[main]/Neutron::Keystone::Auth/Keystone_endpoint[RegionOne/neutron]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Neutron::Keystone::Auth/Keystone_endpoint[RegionOne/neutron]: Skipping because of failed dependencies
Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_user_role[cinder@services]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_user_role[cinder@services]: Skipping because of failed dependencies
Notice: Finished catalog run in 3.10 seconds
Please let me know how to fix this.

This problem connected with proxy-setings.
As the first steps you should try:
       1. export system env variable:
http_proxy=http://www-proxy.ru.oracle.com:80
https_proxy=https://www-proxy.ru.oracle.com:80
no_proxy=127.0.0.1,localhost
and you can also export
    export OS_TENANT_NAME=admin
    export OS_USERNAME=admin
    export OS_PASSWORD=root
    export OS_AUTH_URL=http://<conntroller_IP>:5000/v2.0/
2. and than restart mysqld, if it is running, stop iptables and repeat installation process from beginning with the currently generated answer file
if we are exporting variable OS_PASSWORD, its value should be the same as value for CONFIG_KEYSTONE_ADMIN_PW in the currently generated answer file.
This OS_PASSWORD will be written by packstack in the /root/keystonerc_admin file and will be used as admin's password for login to Openstack dashboard.

Solution Manager does not get service definitions from SAP in self diagnosi

Hi,
In our production solution manager transaction solution_manager, self diagnosis we are getting a warning message on our development solution manager.
Solution Manager XXX does not get service definitions from SAP.
The production Solution Manager is the master in SDCCN for the test Solution Manager. In the test Solution Manager, the scheduled task REFRESH SERVICE DEFINITIONS has task System ID of O01. It is pointed to RFC destination SDCC_OSS, not the production Solution Manager system.
It gives the same warning if I point the task to the production Solution Manager system.
Has anyone seen this before? Any ideas?
Best regards,
Russ

Hi,
i guess have you activated SDCCN from your solution manager system too?
if not please activate. since that setup helps solman retrive the service definitions used in SDCCN from SAP (SAPOSS).so this ultimately allows you to set solution manager system as Master, so all the satellite system get the service definition from solman and do not need a direct SAPOSS connection.
and Please check this Note 1143775 - SAP service content update
the wiki for trouble shoot ["EarlyWatch Alert is Red Flagged - how to resolve" |http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=228262728]
please check.
Thanks,
Jansi

How to backup music from a 3G that is not in service to itunes

how do you backup music to itunes from a 3G that is not in service ?

Hi,
I think your data model is snow-flake schema,we can get the data from snow-flake schema also.Pull the columns from both fact and DIMB into criteria.It will display the result.
mark if helpful/correct...
thanks,
prassu

After 04 months of purchase of iphone 5 the lock button is too hard. At times its not working at all. The phone has been purchased in USA now I'm not getting service in India. After all whats the point in spending so much amount without any service.

After 04 months of purchase of iphone 5 the lock button is too hard. At times its not working at all. The phone has been purchased in USA now I'm not getting service in India. After all whats the point in spending so much amount without any service.

The warranty says that Apple may restrict service of an iPhone to the country of sale, and any reliable salesperson will tell you that if you tell them that you plan to use the iPhone in another country. Such service restrictions are common with cellphones and are by no means limited to Apple's phones.
Sorry, but if your iPhone requires service, you will need to send it to someone you know in the US who can get it serviced and then send it back to you.
Regards.

TNS: could not resolve service name

ERROR: ORA-12154: TNS: could not resolve service name
does any1 know what this means...and how to overcome this problem
username : scott
passwd: tiger
host string: myora
i have personal oracle8i in d:\oracle
and d2k in d:\d2k
it connects with the SQLPlus
however with d2k when i try to connect it gives the above error
message.
does any 1 know a solution to the problem...

Hello,
First of all, If you are using PO8i and D2k as a front end
on single machine,no need of specifying Connect String. You can
connect using scott,tiger. If still it is giving problem,try
this one.
Open TNSNAMES.ORA file from folder NET80/Admin in your PC
using NOTEPAD. Look there entry for myora. If it is there,Check
SID,IPAddress or remove word "World" from there. See E.g
ora816 = -- Your connect string
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = tcp.world)
(PROTOCOL = TCP)
(Host = 10.0.0.3) -- IP address
(Port = 1521)
(CONNECT_DATA = (SID = ora816) -- Database SID
Hope it will work...
Adi

Previously i use ios 4 version 4.2.1 then i updated to 4.3.3 the problem is my network coverage sometimes not in service or no network?now i update to ios 5 its still happend?can advice me..

Previously i use ios 4 version 4.2.1 then i updated to 4.3.3 the problem is my network coverage sometimes not in service or no network?now i update to ios 5 its still happend?can advice me..

Scroll down and see the "Update Your Device Using iTunes" section here:
HT4623
There is no "update icon" in iOS versions earlier than iOS 5.
The update is very large (over 1.2 gigabytes). You need a good internet connection to download it to your computer. Maybe you'll need to take a trip to a city to get a good enough connection.

*** WARNING: Could not start service 80 for protocol HTTP on host MyFQDN

Hi,
I m configuring an external Sap webdispatcher to point to an ICF service
I need to install it on Windows Web server where others web sites are running.
I configured a specific ip for that on the Web servers and enter the DNS name in our domain.
On the the pfl file I define :
SAPLOCALHOSTFULL=<MyFQDN>
icm/host_name_full =<MyFQDN>
and specify icm/server_port_0 = PROT=HTTP,PORT=80
Each time I m starting it I received *** WARNING: Could not start service 80 for protocol HTTP on host <MyFQDN> .........
If I m using another port (Ex:86)no problem with my FQDN.But if I m doing servername:86 it s working also.
It s seems that the webdispatcher don t care about my FQDN.
How can I have the WEBDISPATCHER pointing to this specific FQDN and not all ?
Thanks,

Hi Damien,
You problem is perfectly logical : It's not possible to have 2 programs (IIS and web dispatcher) listening together on the same 80 HTTP port.
There is no configuration that I know on the web dispatcher to tell him to listen only on one IP address.
Summary : what you want to do is not possible.
I had a similar request and I did the following.
I use a Linux box with an Apache reverse proxy to select to distribute the HTTP requests on different web dispatchers. The rules depends from the called URLs.
Regards,
Olivier

Can the 3G service in an ipad be used in south america where at&t or verizon do not have services?

I want to buy a new ipad that will be mainly used in south america where at&t and verizon do not offer services. Can the 3G option be used with a local carrier?

Yes, but before you purchase, make sure you know whether the carriers in South America are GSM (AT&T model) or CDMA (Verizon). GSM is much more widely used around the world than CDMA.

ORA-12154: TNS:could not resolve service name

Hi Guru's
i applied Maintainacepack 3480000 patch on my application for upgrading 11.5.7 to11.5.10.2, after completion of patch, I run the autoconfig it has given bellow error, please anybody can help me, i need to finish my task immediately, please provide me the solution.
autoConfig Profile Phase
Running Profile Process 1 of 1 for CLN_TOP
Executing script in InstantiateFile:
/sgmtemp/prodcomn/admin/install/MSBEP004_dcpsr006osm/clnadmprf.sh
script returned:
clnadmprf.sh started at Sun Feb 17 06:24:13 WST 2008
The environment settings are as follows ...
ORACLE_HOME : /sgmtemp/prodora/8.0.6
ORACLE_SID :
TWO_TASK : msbep004
PATH : /sgmtemp/prodora/iAS/Apache/perl/bin:/sgmtemp/prodora/8.0.6/bin:/sgmtemp/prodappl/fnd/11.5.0/bin:/sgmtemp/prodappl/ad/11.5.0/bin:/sgmtemp/prodcomn/util/jre/1.1.8/bin:/sgmtemp/prodcomn/util/unzip/unzip::/sgmtemp/prodora/8.0.6/bin:/usr/bin:/usr/ccs/bin:/usr/sbin:/sgmtemp/prodora/iAS/Apache/perl/bin:/sgmtemp/prodora/iAS/Apache/perl/bin:/sgmtemp/prodora/8.0.6/bin:/sgmtemp/prodcomn/util/jre/1.1.8/bin:/sgmtemp/prodcomn/util/unzip/unzip:/sgmtemp/prodora/8.0.6/bin:/usr/bin:/usr/ccs/bin:/usr/sbin:/usr/java14/jre/bin:/usr/java14/bin:/usr/bin:/etc:/usr/sbin:/usr/ucb:/sgmtemp/prodappl/bin:/usr/bin/X11:/sbin:/usr/lpp/pd/bin:.
LD_LIBRARY_PATH : /sgmtemp/prodora/8.0.6/network/jre11/lib/aix/native_threads:/sgmtemp/prodappl/cz/11.5.0/bin:/sgmtemp/prodora/8.0.6/lib:/usr/dt/lib:/usr/openwin/lib
Executable : /sgmtemp/prodora/8.0.6/bin/sqlplus
SQL*Plus: Release 8.0.6.0.0 - Production on Sun Feb 17 06:24:13 2008
(c) Copyright 1999 Oracle Corporation. All rights reserved.
ERROR:
ORA-12154: TNS:could not resolve service name
clnadmprf.sh exiting with status 1
ERRORCODE = 1 ERRORCODE_END
.end std out.
thanks

Please Apply "Patch 5985992 - TXK AUTOCONFIG ROLLUP PATCH Q (JUL/AUG 2007)", run AutoConfig, and check then.

IFS 9 : TNS:could not resolve service name

Hello,
I have this message when Trying to connect in Java to IFS 1.2 :
oracle.ifs.common.IfsException: IFS-21008: Unable to connect to
iFS service
java.sql.SQLException: ORA-12154: TNS:could not resolve service
name
I have been developing with IFS 1.16 for a while but now I have
to upgrading to IFS 9 (1.2). To set up my development
environment I did the same thing that I did for the version 1.1.6
1-     Copying all Jar from D:\oracle\ora90\9ifs\lib and I had
them to my classpath
2-     Copying the folders under D:\oracle\ora90\9ifs\settings
to have access to the IfsDefault.properties. file.
3-     I got the new JDBC driver and Oracle Client 9 on my
developer station.
IfsDefault.properties is pointing to the right TSN. When I test
my TSN (orcl) with the SQL+ it works just fine. I tried to use a
Invalid Ifs Service Name instead of IfsDefault too see if I got
a different error message and no, I got the same error. It looks
like the environment doesn’t find the IfsDefault.properties
file ?
Any Idea of it could be ?
There is the code that I use to connect :
LibraryService service = new LibraryService();
CleartextCredential cred = new CleartextCredential
(username, password);
ConnectOptions options = new ConnectOptions();
options.setLocale(Locale.getDefault());
options.setServiceName(repository);
options.setServicePassword(repositoryPass);
_ifsSession = service.connect(cred, options);
// Doit mettre explicitement le Admin flag dans la
Session
DirectoryUser user = _ifsSession.getDirectoryUser();
_ifsSession.setAdministrationMode(user.isAdminEnabled
_logger.info("user " + user +" is now connected to
Ifs " + repository + ", " + _loggedUserCounter + " connected.");
Thank you

Looks like your TNSnames is not properly configured .. Did you
try to do a sqlplus from the command prompt to see if you can
connect to SQLPlus ??

Fundamental Problem: ORA-12154: TNS:could not resolve service name

Hello,
I am faced with a fundamental problem:
ORA-12154: TNS:could not resolve service name
I can say with a high level of confidence that the TNSNAMES.ora configuration file is not the problem. My peer is using the exact same file with no issues. I am using the TOAD database utility to connect to the db host. Also, I have ORACLE_HOME defined and the file is located in /network/ADMIN.
Any ideas?

Hello,
Make sure your toad looking into right tnsnames.ora; also try this from command line after adding following entry to your tnsnames.ora.
sqlplus username/password@ECDEV
ECDEV =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS =
        (PROTOCOL = TCP)
        (HOST = rscdd01) --> you can try ipaddress of your server name as well
        (PORT = 1521)
    (SDU = 8192)
    (CONNECT_DATA =
      (SERVICE_NAME =ECDEV)
      (INSTANCE_NAME=ECDEV)
)Edited by: OrionNet on Dec 23, 2008 2:22 PM

Listener_scan1 could not find service name

Hi All,
I have installed 11203 on 2 node RAC cluster. I have created 1 scan listener. when i give lsnrctl status LISTENER_SCAN1, I am getting below error
TNS-01101: Could not find service name LISTENER_SCAN1
Please give your suggestions and help on this issue.
Thanks,
NR

HI,
Try to configure the tnsnames.ora in this format and let me know
if you are using load balancing , try
TBESTDB =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = node1_vip)(PORT = 1531))
(ADDRESS = (PROTOCOL = TCP)(HOST = node2_vip)(PORT = 1531))
(LOAD_BALANCE = yes)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = TBESTDB)
And you can add below if you would like to connect to specific instance
RAC1 =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = rac1-vip)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = rac.oracle.com)
      (INSTANCE_NAME = rac1)
RAC2=
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = rac2-vip)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = rac.oracle.com)
      (INSTANCE_NAME = rac2)
Note: Replace the SID, Servicename, hostname, port etc according to your environment, And also make sure that the tnsnames.ora should be in a proper format(eg : even the opening and closing bracket should be in correct order. If u add additional space also it will throw error..)
Regards,
Pradeep. V

MSDAORA,IIS,ORA-12154: TNS:could not resolve service name

Hi All,
I have a Web Service that coded in VS2008, using ORACLE DB(9i).
At a time the application working fine and I can access and do everything with database.
Some other time database server is down for scheduled maintenance. If I try to run the application at this point of time it will raise err "ORA-12154: TNS:could not resolve service name".
When i reset iis it start to work fine for a while.Then same problem occurs again.
My connection string is connectionString="provider=MSDAORA.1;data source=***;user id=***;password=***;"
is there any solution?
i tried that;
If theire is multiple copies of OCIW32.dll you have to make sure that there is only one copy of OCIW32.dll which should be in /Bin folder of the oracle home folder.
Add the IUSR_machine name account and the IWAM_machine name account to the Oracle home folder. Give both accounts full control.
Create empty file tnsnames.ora in same directory as aspnet_wp.exe,

Hi,
The issue doesnt make much sense on the surface at least. 12154 means the client couldnt figure out what you were referring to with your Data Source= entry. If the database was taken down, I'd expect an "oracle not available" or some other sort of error, as the client should have still be able to resolve the entry at least, even if the database wasnt up at the time.
What do you mean by "When i reset iis it start to work fine for a while.Then same problem occurs again."? The same problem meaning you get 12154 when you take the database down? Or you get 12154 without a db restart?
Are you using TNSNames.ora for client naming resolution, or something else (ldap, for example)?
Greg

ORA -ERR :Tns could not resolve service name

Hi,
I am tring to get into sql plus. As the oracle is pre installed and as donot know the system password, I am tring to login as Scott/tiger and host string as 'ORCL'.
I am getting the following error.
ORA-12154 :
Tns could not resolve service name
Is there any way to find the Host string name through any of the installation files.
Please suggest.
Badrinath

Hi,
Open the tns file ( available at oracle_home/network/admin/tnsnames.ora). I do not know what your oracle_home name is. Usually it is oracle/ora81/ under c: or D: or where ever you installed Oracle. Go thru the file. You will find the service name. Use that while logging. If you want to login to ORCL, it has to be there in tns files name otherwise Oracle cvan not resolve the name.
Good luck
Krishna Priya
null

Not In Service?!

Similar Messages

Maybe you are looking for