Not installed the driver for the printer HP DESKJET 2050 J510

I'm trying to install the drivers for the printer, but the step "connection to the printer" windows it just does not see. If I try to connect the printer without drivers, Windows gives an error message. (shown on screenshoot)

Hey @jmchich ,
Thanks for your post on the HP Forums!
I would like to apologize first off that I am not able to read the screenshots as this is the English HP Forum Support Board. I see you speak english, if are able to translate that message into english or switch your computer language that would be greatly appreciated.
Look forward to hearing back from you!
I worked for HP.

Similar Messages

  • I can not install any driver for any print to my laptop.

    I have been trying for months to install a driver for just one printer and we have five or six printers.
    My problem is that every time I install a driver it fails and rolls back, everytime. It would just about completely finish installing before rolling back.
    My laptop is a Windows Vista Home Premium Service Pack 2.
    PS:  There were three other users before me that was using this laptop.  I know all three of them and none of them know much about computer. So I tryed to clean out all the junk out of it.
    I got a little more info for however reads this post.  The error that I recieve has no number or error code it just says "Fatal error during installation," but it also has in the title bar this "C:\Users\Justin\AppData\Local\Temp\7z1763\Setup\.​.\Setup\hpzprl01.exe, which seems like it might help.
    Hope that helps.

    I figure out what my problem was.  Here is what I did: I recheck all of my services and startups. If you need help I'll layout steps for you. Just reply that you still need help.

  • Installing a driver for the Apple Keyboard in Boot camp windows

    I recently installed Boot Camp, VMware and Vista on my Mac so that I could move all of my computing on to one computer (I use a few programs that aren't available for the iMac). In Windows I cannot use the number pad for input - I can only use the numbers just above the letters. This is a major inconvenience because I input numbers often. I have tried to search for the driver for the Apple Keyboard that is compatible with windows, but have been unsuccessful.
    Anyone know of a fix for this?
    Thanks!

    I tried putting in the Leopard disk and running setup.exe and that went through the motions of installing all of the drivers, but after I restarted the windows machine it still doesn't recognize my keyboard. This may be a system wide issue, because when I work in Windows it also tells me that I do not have a camera installed for video chat. At first I thought this was just part of the price I had to pay to have a Mac and use windows on it, but now I'm thinking that my drivers were not installed properly because I know a camera is installed internally (obviously - its a less than one year old iMac all-in-one).
    Can anyone think of something that I'm not doing? I have gone into the control panel in the Windows machine and tried to update my driver, but it keeps telling me that the driver is correct (it has windows driver for a standard ps/2 keyboard).

  • How come the driver for the validiy sensor has an older version but newer release date

    Can someone please explain why the driver for the finger print reader has an older date but a newer version?
    The one on HPs website := Driver Version 4.4.234.0 and Driver Date 24/09/2012.
    Yet the one on my P.C. := Driver Version 4.5.235.0 and Driver Date 22/07/2009.
    Is it worth updating or not?
    I can't seem to get the add-on working on I.E. 11.0.3
    Any advice appreciated.

    Spyke,
    Welcome to the HP Forum.
    Short Answer: 
    If you are running the same version of the Operating System that you were running when the driver was installed, then it is likely your driver is fine as it is.
    Based on your Example:
    If you have upgraded your Operating System, and you are using Windows 8 or Windows 8.1 AND your system is among those supported by the "newer" driver, then you should upgrade.
    Long Answer:
    There are several Validity Sensor Drivers of this same revision - in the case of sp58869 , the driver has been issued as a compatible driver for the HP Envy M6 for both Windows 8 and Windows 8.1.   The change might have required additional supporting libraries used with the driver and did not require changes to the driver software itself.
    You didn't say which computer model you have nor the version of Windows you are running.
    It is true the specific driver within the version class might make a difference if you have updated your Operating System since your own driver was issued for your computer.
    It is true that reinstalling a "same version" driver can help if the driver on your system is corrupted.  Driver corruption is normal to some extent -- leave a driver on a Windows computer long enough and one or two of the zillions of instructions can corrupt, links can be lost; data can become unstable due to library changes or registry errors.
    Drivers control hardware.  The fingerprint driver only controls the fingerprinter.
    Software provides a means for the user to interact with the computer in an organized environment.
    ==================================================​=========================================
    Sometimes a perfectly good driver can "look bad" -- certain data persists from boot to boot.  This is normal and the fact that some data is immediately available at boot means the computer starts up faster and that the Operating System is available sooner to the user of the computer.
    When things in the boot-to-boot instruction set get tangled, then things may stop working:  TouchPad, mouse (external), fingerprint software, maybe even the keyboard.  The login data profile for the user account may not set up properly.
    Driver Reset / Clean-the-cobwebs off the computer:
    Close all your programs and Shut down the computer
    Disconnect everything (little Unifier for the keyboard / external mouse can stay)
    Perform the Hard Reset for your notebook
    Boot the computer and log in
    Next...
    If Internet Explorer 11 is a recent update from a previous version, and even if this is not an upgraded IE issue, it is important that you be running the most recent version of your fingerprint Software.
    I am assuming a lot here -- including that you are running HP SimplePass Version 6.x.
    Continuing that line of thought; you might find the following useful:
    Simple Instructions to Upgrade HP SimplePass
    Brilliant Post - How to Ask Your Question
    Click the Kudos Thumbs-Up!
    It is a nice way to say “Thank You”.
    Although I strive to reflect HP's best practices, I do not work for HP. 
    Kind Regards,
    Dragon-Fur

  • Does anybody know how to modify the driver for the Tektronix 370A curve tracer so that it will work with the 370B?

    I am trying to control a Tektronix 370B curve tracer using LabView via a GPIB interface. However, there are no drivers available for download for the 370B. There is one available for the 370A, but it is not compatible with the 370B and I have been unable to figure out how to modify it to make it work with the 370B. Does anyone know how to modify this driver, or know of an existing driver that works with the 370B? Thanks!

    Hi S _Bracht,
    Yeah, unfortunately, the Tektronix 370B does not currently have an instrument driver and the driver for the 370A is not supported by National Instruments (it is just posted on our website as a courtesy) - so I am afraid that there is not really any more information on the differences that might exist between the two available from National Instruments.  As an alternative, you can always develop your own driver using the VISA and 488.2 drivers + a copy of the user manual for the Tektronix 370B.  Otherwise, you may consider speaking with Tektronix or getting ahold of a User Manual for the 370A and comparing some of the settings - there are likely some differences in your configuration options at the very least.  Or, if someone out there has tackled this before and shares their knowledge...
    Good luck! 
    Regards,
    Anna M.
    National Instruments

  • How do I update the driver for the motherboar​d

    HP Pavilion DV6 1105eo
    How do I update the driver for the motherboard?

    Hi alpin68. What component of the motherboard are you looking for drivers for? Here is the driver page for your notebook, perhaps you can find it here.
    HP Pavilion dv6-1105eo Entertainment Notebook PC Drivers:
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategor​y?os=2093&lc=en&cc=us&dlc=en&sw_lang=&product=3933​...
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Where is the driver for the LGE-DMGSA-​U10N(B) DVD multi Burner.

    Where is the driver for the LGE-DMGSA-U10N(B) DVD multi Burner.
    Thank you,
    Tim

    Hello,
    As far as I know, DVD±RW disc drives are automatically detected by Microsoft Windows XP and newer versions of Windows.  Are you looking for the latest firmware?  The latest update I could find for a T61 is here on Lenovo's support web site.
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • Were can i get the driver for Laser printer canon mf 8030 for os 10.8

    I can not find the driver for my IMAC on the home page to Canon.
    The printer is Canon laser MF 8030 cn. and i use the OS 10.8.2.

    Welcome to Apple Support Communities
    http://www.canon-europe.com/Support/Consumer_Products/products/Fax__Multifunctio nals/Laser/LaserBase_MF_series/i-SENSYS_MF8030Cn.aspx?DLtcmuri=tcm:13-961785&pag e=1&type=download

  • HT1338 How do I install a driver for the speakers I have connected to the headphone jack?

    How do you install a driver for speakers I have connected to the headphone jack?

    You don't need drivers for speakers in a headphone jack.
    What is the problem?

  • DO NOT install this driver for Sound Blaster Audigy SE, or Sound Blaster Audigy Va

    I have two creative products that work fine under xp. But since installing vista my sBli've platinum doesn't work at all, i find out that creative are no longer supporting this card for vista. Fair enough... So I'm waiting for the SB audigy driver update and behold I read that i shouln't install the driver for my other Sound Blaster card, Audigy SE.
    what are creative trying to do? does'nt look like a well run company.
    And from what I've read what is the point of getting a card that is suppoted by the new driver as other people seem to be complaining that this new driver doesn't enable all the features as under Xp.

    If I am right your Audigy is the first Audigy (EMU0k2) soundcard that was launched by Creative Labs. You need the drivers for the audigy series. For driver/application updates: Latest downloads Audigy Platinum
    For a proper install, you may use the tools Driver Cleaner or Driver Sweeper in Windows Safe Mode to clean up the older drivers that are left in the system which can cause the problems you are having now; you can find these tools at Guru3D (under 'General Utilities').
    After that You can install the drivers including the software/applications by using the install cd which is supplied with your Audigy soundcard, and then install the driver updates manually afterwards.
    Or you can try out the new Daniel_K's driverpack (software/applications included, install cd not needed): SB Audigy Support Pack 2.8.000EQ (08/22/2008)
    Good luck!
    Message Edited by CTman on 09-23-2008 05:38 PM

  • Where is the driver for the Zen Creative 4GB mp3 play

    When I installed everything on the CD and plugged the mp3 player into my Vista computer it said 'looking for driver' and never found it. I have not been able to find the driver for this type of player anywhere.
    It worked fine on my brothers computer, which also has Vista. He got his computer after mine, and has Athlon processor as opposed to my Inter Core 2 Duo. Can't see why that would make a difference.
    here's the walmart link, so there is no misunderstanding about the player I am using:
    http://www.walmart.com/catalog/produ...uct_id=7789723

    I think Creative should add the Sleek Photo to the player list in downloads and add the latest version there (I have version .0.0e). I ordered my player in December (for Christmas). There are a few issues that I have addressed in my "A few annoyances with Zen Sleek Photo 20GB (Request)" thread.
    Sadly there has not yet been an update to fix the artist listings etc. as mentioned in my thread
    I got in contact with another Creative Zen Sleek Photo user who also li'ves in Switzerland and has the same problems (tracks not been sorted correctly even with correct ID3 tags, which work in many many Windows applications).
    By the way, sadly the Sleek Photo gets a load of dust under the screen too, unless you are very careful. I have been unable to remove most of the dust even using compressed air! I would rather not have to get it replaced because of this (unless Creative makes a slightly new casing model to prevent dust under screen) as I would probably end up paying rather a lot for postage (it's going indirectly through another company)
    I hope there shall soon be a firmware update addressing these things,
    Thanks for any response to this,
    StephenRMessage Edited by StephenR on 03-07-20060:53 PM

  • Where is the driver for the keyboard ??

    On the page
    http://support.lenovo.com/en_US/detail.page?Legacy​DocID=MIGR-73235
    where do you see the link for the executable ?
     I need the latest  driver asap...
    Levono makes the thinkpad brand worse than ever
    Let well be lenovo, it was far better before.

    HI Okle,
    Can you try it now? Because I am able to download using the black arrow as chrisinleedsuk pointed out.
    Regards,
    Cleo
    WW Social Media
    T61, T410, x240, Z500, Flex 14
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    How to send a private message? --> Check out this article.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • I have an Epson R2400 and I can not find the driver for borderless printing

    I have two Epson printers; I added the first, a R200 using the Printer Utility and in the add printer screen it asked me what page setup I wanted. I chose ALL and it gives me the ability to print borderless prints. I then added the R2400 using he Printer Utility but the "page setup" is grayed out and I do not have a borderless print option o this printer.
    I have tried deleting the R2400 from the list of printers and adding it again without success.
    I am using the drivers that came on the CD-ROM with the printer.
    Has anyone had a similar experience with the R2400 borderless print issue and might anyone have an answer?
    Thank you.

    Hi: Please click on the device in the device manager. Then click on the details tab. Post the top string of characters you see. Those will identify the type and model of the missing device and I can send you the link to the drivers. It is either your AMT driver, TPM driver or IMEI driver. In the meantime, install the chipset driver and reboot if you have not done so already. http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=5037900&prodNameId=5037902&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=vc-88640-1 Paul

  • How can I download the driver for a printer MX410?

    I replace the memory to my computer but couldn't find the disk with the software for my MX410 printer , please let me know how can I download the drive.
    Thank You .

    All the software and drivers for your "printer" is here;
    http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mx_series/pixma_mx410#Dr...
    (This is the EOS area, so you may get better responses on printer questions in the Printer section of the forum.)
    EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
    EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
    Photoshop CS6, ACR 8.7, Lightroom 5.7

  • I used my not empty hard drive for the time machine, so now i only have stuff from time machine, everything else is gone!!! please help, does this mean everything else is completely gone?

    Did mac format everything that was there? if not, why cant i see it when i opebn the drive, and if it did format it is there a way to bring it back? my whole life is on that harddrive!!!!

    If you clicked through a warning that Time Machine was going to erase the drive, then yes, everything that was there before is gone. Restore from one of your backups.

Maybe you are looking for