Not Java..but..Ethereal packet sniffer and (*.cap) capture files?????

Didn't know where else to post a question like this..
I want to view a certain capture file and see what's happening. I want to userstand the attack and explain how the overlapping IP fragments are be used but i have no clue.
Does anybody know anything about this or know more about it and can inform me on some information about this as to what is going on??? I have no idea how to know what is happening here in this file and was looking for some answers or a website that can teach me.

There is something i'm not getting, all I have to do is see what is happening describe the attack and explain how the overlapping IP fragments are used.
But when I open this certain capture file, all I see is what is displayed in front of me, a list of all the packets which protocols they are, etc.... but I don't know what it all means???? To me it's just a bunch of characters, How do I know what is actually happening???
For instance.... the first one...
NO. Time SOURCE DESTINATION PROTOCOL INFO
1 0.00000 Cisco_7c:eb:3d Cisco_7c:eb:3d Loop Loopback
It's like okay, but what does that mean???

Similar Messages

The Flash Player is not running but it is there and it is enabled and Active X is not checked. The Player version is 16.0.0.305. I have the latest ie11 and the latest W8.1. I have used the Adobe tool to delete the Flash and subsequently I have updated or

The Flash Player is not running but it is there and it is enabled and Active X is not checked. The Player version is 16.0.0.305. I have the latest ie11 and the latest W8.1. I have used the Adobe tool to delete the Flash and subsequently I have updated or reloaded Flash using your updater. I have gone into IE options and insured that the settings are supportive of Flash. The Adobe mini Flash test program on your site says it not enabled or Active X is enabled - not true - all is set as it should be. I have gone through your forums but to no avail. I've looked in MS forums but nothing that made any difference. What's going on and what can I do about it?

Try using Firefox. Flash usually works on Firefox when it won't on Safari. I noticed that the Safari does not show the same version as Firefox does. Iwonder if that could be the problem. Safari on the left shows 10.1, Firefox show 10.3

How do I send files from my IMAC via bluetooth to my ne Ipad. They will not "pair" but they are connected and discoverable. I send a file from Imac snow leopard OS X 10.6 to the ipad but the failure message says the ipad does not have the ncessary servr

How do I send files from my IMAC via bluetooth to my new Ipad? They will not "pair" but they are connected and discoverable. I send a file from Imac snow leopard OS X 10.6 to the ipadusing bluetooth, but the failure message says the ipad does not have the necessary services. What are these? Do I neeed to have iphoto and ms word to send pix and .doc files?

File Sharing over Bluetooth is not a feature of iOS devices. iOS does not include the required Bluetooth profiles to allow this. You cannot add this feature, so you may as well stop trying.

I am still getting redirected to various web sites when using Safari. My PC is not affected but my I phone and I pad are. I have reset my router and changed my admin name and password. I am still being redirected.

I am still getting redirected to various web sites when using Safari. My PC is not affected but my I phone and I pad are. I have reset my router and changed my admin name and password. I am still being redirected.

Chances are you mis-typed a character in the Wifi password and the devices saved that information. Now whenever you try to connect the device refers to the wrong password and the Jetpack does not accept your connection. Tell your devices to forget the wireless connection and start over.
Once you enter the proper WiFi credentials the Jetpack will allow you to connect.

I have CC Indesign CS6, but client has CS3 and wants CS3 files.

I have CC Indesign CS6, but client has CS3 and wants CS3 files. Can I access earlier versions through CC to do the 'downsave' thing? Any workarounds?

You're a bit of a bind.
To save backwards you need to File>Export and choose IDML
But you will need to find someone with InDesign CS4 or CS5 as that is the versions that will allow to File>Export and choose INX.
INX is the only version that can be opened in CS3.
To be clear - the client should really update to the same version as you - as with each version the text engines are different, so there will be different line endings and perhaps even overset text depending on the layouts etc.
Plus any new feature in CS6 that was not in Cs5.5 or earlier versions will be stripped out - and going back to CS3 there are a few things which could alter the layout significantly.
I suggest the client upgrade to the latest version. Or if you can find a CS3 version online to purchase for yourself - either way - you should both work on the same version of the software.

In my Itunes library label: My Music albums content is missing even if I down loaded from a personal CD. I was trying to make up some playlists and the music is not there but the album title and tile is.anyone have any suggestions.

I have a Dell Desktop Optiplex 380 with Windows 7 operating system. regarding use of I-Tunes library and making playlists from "My Music"I went to My Music clicked on the album tile to drag to the new playlist and all of the albums are empty. Like the tracks are labeled but not there There is a note to go to the store and buy each track for 0.99. These Albums have been in the system for several years. where are they, and what happens to them. Do I need to import again. which could be a pain
Would appreciate any suggestions.
Thanks<
Flemcat

Hello Flemcat,
After reviewing your post, it sounds like you are missing content from iTunes library. I would recommend that you read this article, it may be able to help the issue.
iTunes: Finding lost media and downloads - Apple Support
Thanks for using Apple Support Communities.
Have a nice day,
Mario

I updated Pages two months ago, yet my gmail program will NOT send out a pages document and a pages file I saved to desktop will NOT open and a box pops up telling me it won't open document without the Pages upgrade WHICH I HAVE ALREADY DONE...PLEASE HELP

I updated Pages two months ago to the latest version. BUT, my MAIL program will not allow me to send documents I attach that are genereated witht eh update Pages. And, when I save a doc to desktop generated in Pages, it will not opena, a box pops up and tells me the it wil not open until I have upgraded to the new PAges, WHICH I HAVE ALREADY DONE!!! What is UP with this, can anyone please help me? Would GREATLY appreciate it.
SA

Pages 5 is in a new format that is not compatible with GMail, Google, Amazon, DropBox and other 3rd party servers.
Peter

Mac not reading Disc full of .VOB and other DVD files

Hi all! I wasn't sure where to put this so here I am.
I'm currently transferring old VHS cassettes to DVD-R using the Sony RDR VX530. The disc plays in the Sony. I finalize it and take all appropriate steps. When I insert the DVD-R into my MacBook, it says "Burnable Disc" and shows no files. None at all. I took the disc to my sister's house and put the disc in her Windows laptop and ::BAM:: all the files were there and playable on the windows machine. What gives? I can put other dvds in the drive and see the Video_TS and Audio_TS files, but not the ones I record on this machine. The machine only has two recording options, VR and Video, both of which have to be finalized. Is there a solution besides me having to go borrow a windows laptop to connect to the network so I can pull the .vob files onto my mac?

It sounds to me like you didn't finalize your DVD!
Most DVD recorders and DVD cameras don't finalize the DVD until you specifically tell them to. This finishes writing things like file system information on to the disk but it also makes it so that more data cannot be written to the disk in the future. (This is why it doesn't do it until you tell it to).
Some Windows computers have software that allows them to read disks that haven't been finalized yet. I actually think its a feature of Vista and 7 but I'm not sure about that. Either way, look in your DVD recorder's manual about finalizing the disk to get it to work on your Mac.
Regards,
-Ryan

Java is not working but it is installed and it is not blocked.

I'm unable to access most websites - the one error message that I've received says: It appears that software on your computer is blocking JavaScript. To enjoy Hulu.com, you'll need to enable JavaScript in your web browser. Please configure your security software or browser plugins to allow Hulu.com to load JavaScript.
I re-installed Java and there is no Java software being blocked so I don't understand why Firefox is not loading the pages.
hulu.com, wordpress.com, facebook.com

You are getting a message about Javascript, which is not at all related to Java.
Please reset firefox [[Reset Firefox – easily fix most problems]]

PermGen not full but full GC triggerred and classes unloaded

We have a recurring problem where a full GC gets triggered that is quite long (7 seconds). By observation, it seems that a great deal of the full GC time is spent unloading "sun.reflect.GeneratedSerializationConstructorAccessor" classes. However, we have PermSize set to 64 meg and it seems that only 9 megs are actually in use. All the other GCs for the day (about 8.5 hours till the problem) are fairly short (0.10 to 0.35 seconds)
Any hints as to what is triggering this long GC and how I can avoid it? I know stopping class garbage collection could help, but I am not finding enough information on the risks of doing this. Plus I thought the PermGeneration contained the classes, not the tenured generation.
Thanks.
-- 2
Details
Solaris 2.8, dual CPU UltraSparc IIIi with 1MB cache each
8 GB RAM
Java 1.5.0_06
Runtime args:
-Xms1280m -Xmx1280m -server -verbose:gc -XX:+PrintGCDetails -XX:+PrintGCTimeStamps -XX:+DisableExplicitGC -XX:+PrintGCApplicationStoppedTime -XX:PermSize=64m
"jmap -h" result (sometime after Full GC):
Server compiler detected.
JVM version is 1.5.0_06-b05
using thread-local object allocation.
Parallel GC with 2 thread(s)
Heap Configuration:
MinHeapFreeRatio = 40
MaxHeapFreeRatio = 70
MaxHeapSize = 1342177280 (1280.0MB)
NewSize = 2228224 (2.125MB)
MaxNewSize = 4294901760 (4095.9375MB)
OldSize = 1441792 (1.375MB)
NewRatio = 2
SurvivorRatio = 32
PermSize = 67108864 (64.0MB)
MaxPermSize = 67108864 (64.0MB)
Heap Usage:
PS Young Generation
Eden Space:
capacity = 106496000 (101.5625MB)
used = 24655256 (23.513084411621094MB)
free = 81840744 (78.0494155883789MB)
23.151344651442308% used
From Space:
capacity = 196608 (0.1875MB)
used = 134808 (0.12856292724609375MB)
free = 61800 (0.05893707275390625MB)
68.56689453125% used
To Space:
capacity = 14483456 (13.8125MB)
used = 0 (0.0MB)
free = 14483456 (13.8125MB)
0.0% used
PS Old Generation
capacity = 894828544 (853.375MB)
used = 627750416 (598.6694488525391MB)
free = 267078128 (254.70555114746094MB)
70.15315059060075% used
PS Perm Generation
capacity = 67108864 (64.0MB)
used = 9422208 (8.9857177734375MB)
free = 57686656 (55.0142822265625MB)
Verbose GC:
987745K->852246K(1032576K), 0.1995592 secs]
Total time for which application threads were stopped: 0.2016224 seconds
24998.391: [GC [PSYoungGen: 153190K->6928K(149952K)] 996182K->859364K(1023808K), 0.1852391 secs]
Total time for which application threads were stopped: 0.1872944 seconds
25102.514: [GC [PSYoungGen: 149904K->6384K(156864K)] 1002340K->865912K(1030720K), 0.1630581 secs]
25102.677: [Full GC[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor7]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor14]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor12]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor10]
[Unloading class sun.reflect.GeneratedMethodAccessor1]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor8]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor6]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor4]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor2]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor11]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor24]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor21]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor13]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor16]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor9]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor3]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor23]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor1]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor22]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor5]
[PSYoungGen: 6384K->0K(156864K)] [PSOldGen: 859528K->375378K(873856K)] 865912K->375378K(1030720K) [PSPermGen: 9192K->9192K(65536K)], 7.0877752 secs]
Total time for which application threads were stopped: 7.2531067 seconds
25210.000: [GC [PSYoungGen: 142016K->5680K(146688K)] 517394K->381058K(1020544K), 0.0708419 secs]

[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor5 ]
[PSYoungGen: 6384K->0K(156864K)] [PSOldGen: 859528K->375378K(873856K)] 865912K->375378K(1030720K) [PSPermGen: 9192K->9192K(65536K)], 7.0877752 secs]Despite the messages about unloading classes, it is unlikely that class unloading
is taking up any significant amount of the 7 seconds. The last line quoted above
shows the old generation (PSOldGen) had 859528K used before GC and
375378K used after GC. Reclaiming the ~470MB in the old gen took the
majority of the time.
This GC is caused by the fact that your old gen became nearly full, or at least
full enough that the JVM decided that the next young generation GC would
fill up the old generation.
Since you are using 1.5.0_06 you can try using the parallel compacting collector
to do these Full GCs in parallel. It should reduce the time somewhat if you have 2
cpus, and even more if you have 4 or more cpus (or hardware threads).
To enable it, add the option -XX:+UseParallelOldGC.
If that does not meet your needs or if you have strict limits on GC pause times,
then you should try using the concurrent collector. See section
5.4,The Concurrent Low Pause Collector, in the 5.0 tuning guide at
http://java.sun.com/docs/hotspot/gc5.0/gc_tuning_5.html

I log in Apple store select an app insert my pw but i have to' re-verify VISA data and afte that i receive the. Error "your data Are not correct"but from my pc and iTunes i can but apps!!!

Read the title. I can download app from my pc and itunes
but not from iPhone

Once you've purchased an App, it's yours for life. You can however, hide it. To do so, on your iPad, open this link and follow the directions:
http://www.trickyways.com/2011/10/how-to-hide-unhide-apps-from-app-store-purchas es-on-ipad/

HT5654 my iphone 5 fell did not break but went completely black and non responsive. When I plug it to the computer I get a white screen with black apple. When I push both the Top and Homne buttons simultaneously I get the charger picture plug end plus arr

my i phone 5 was dropped, didn't break but went completerly black screen and nonresponsive. I pushed both the home button and top button no response. I plugged it to the computer it gave me white screen with black apple. I pushed the home and the top went black then gave the itune and the charging plug picture. I tried to download and update, the message came as couldn't restore due to unknow error. Any help??

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Top image on blog is not centered but is in Chrome and IE

I just redid my blog and most of my top images on my posts are way to the right. I've cleared my cache and reloaded but they are still way over. The images are fine in IE and Chrome. Is there a reason my top images are not centered?

Seems to be fine here. I'm on Linux, so can't check how it looks in IE.
You can reload the page and bypass the cache with:
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)
See [[Keyboard shortcuts]] and [[Mouse shortcuts]]

Finger print not unlocking but works with iTunes and Apple Store

So I have been battling this same issue since last week. I cannot unlock my phone with the FP scan but it will work when using the iTunes store or Apple Store app. Is there a setting I am missing?

Hello bdallas99,
Congratulations on your iPhone 5s, and thank you for the details of the issue you are experiencing when using Touch ID. I recommend following the steps below for an issue like this (steps 2 and 3 specifically stand out to me for the situation you described):
Troubleshooting Touch ID
Ensure that your fingers and the Home button are clean and dry.*
Note: Cover the Home button completely. Don't tap too quickly, don't press down hard, and don't move your finger while Touch ID is scanning.
Tap Settings > General > Passcode & Fingerprint > Fingerprints and verify:
Passcode Unlock or iTunes & App Store is enabled.
One or more fingerprints have been enrolled.
If one finger isn't working, tap Edit in Settings > General > Passcode & Fingerprint > Fingerprints > Edit to delete and then reenroll the finger.
If that finger still isn't working, try enrolling a different finger.
If you are unable to enroll any of your fingers, take your iPhone 5s to an Apple Retail Store, Apple Authorized Service Provider, or contact AppleCare for further assistance.
Find the full article here:
iPhone 5s: Using Touch ID
http://support.apple.com/kb/HT5883
Thank you for using Apple Support Communities.
Best,
Sheila M.

Error file share not managed but fabric- provider/fileserver and hyper-v host show managed/responding

Hi,
I am really puzzled by the following situation. I have a SCVMM 2012 R2 cluster that manages a Hyper-V host cluster on windows 2012 r2 and storage attached by SOFS Cluster on windows 2012 r2. There is 1 share - CSV1 for all VMs.
Under Fabric -> Providers/Arrays/FileServer everything is green and has status of responding and CSV1 is shown as managed.
Under Fabric -> Hosts -> Cluster properties -> Fileshare storage the CSV1 is visible and status responding, just as on the hyper-v hosts.
The error I have is that around 50% of those VM have "unsupported VM configuration" and under properties I get the error that the file share that the VHDX is running on is not managed. --> This is wrong because the share IS managed by VMM. As
I said I only have 1 (!) CSV for ALL of my VMs. If the share isn't managed by VMM then none of the VM could show a valid status. But this is what I see.
A refresh on the virtual machine gives me an error of ID12700 "VMM cannot complete the host operations... unkown error (0x8005)." On the Hyper-V Host itself for the time frame that I performed the refresh of the VM there are no corresponding errors.
The only thing I found is that all VMs with unsupported configuration have wrong properties entry in SCVMM. In SCVMM
the VM properties -> Advanced -> Availablity is set to "normal". On all VMs that work just fine the Availability is "High". I went to the Failovercluster Manager on the Hyper-V host. All VMs are visible under "Roles" and
therefor are HA VMs. So for some reason SCVMM has a wrong information on their HA status. I am not sure if this is the reason why
some are showing the error and some not but it is the only difference I found.
Does someone have an idea what could cause this behavior?

Yes all of those VMs were created before VMM exists. A Cluster refresh and hyper-v host refresh runs through without errors or information. So that is OK.
Migration is not possible because of the error. LiveMigration is not available from the GUI. Haven't checked powershell yet but will do so today.
I have been able to limit the errors to a smaller number of VMs (well if you could say that). I removed and re-added the hyper-v cluster. After that about 1/3 of all VMs still show the error and all of them are on the same Hyper-V server. Not sure if this
is relevant or just by "accident". I checked this hyper-v host but in regards to storage, network, hyper-v configuration I do not see any difference to the other two cluster nodes either on hyper-v nor on SCVMM.

Not Java..but..Ethereal packet sniffer and (*.cap) capture files?????

Similar Messages

Maybe you are looking for