Not navigating to display/edit screen on execution of a work item

Hi Friends,
I have created a work flow to display/edit a material, but on execution of the work item I am not navigating to the material EDIT/DISPLAY transactions. Can someone please let me know where I am going wrong
Many thanks,
Balaji

Hi,
Drill down to the code of the method in your task, and copy past it here. Or if it is a standard method, just tell us the business object & method. Otherwise it might be possible to help you.
Regards,
Karri

Similar Messages

Field that is not visible in my editing screen but showing in web preview. How to remove it?

Hi Support,
When I preview my form in web preview, I am seeing a field that is not visible in my editing screen. It starts at the left margin of the web preview and runs off the edge of the right side of the page.
The form is also crashing when I attempt 'page view' or 'save as pdf' and I believe this phantom field is the culprit. I have spent considerable time on the form and do not want to recreate from scratch.
Can you please advise how I can make this field visible in the editing section so that I can permanently delete it?
Further information:
I do not have any rules set for any of my fields
I have tried to remove it in Chrome, IE and Firefox
My cache has been cleared today
My plug-ins and flash player are all current versions (updated today and performed a restart)
Thanks,
Kate

Hi Kate,
Could you please share your form with me ([email protected]) so that I can investigate and correct this problem? Instructions on sharing can be found here:
http://forums.adobe.com/docs/DOC-2462
Thanks,
Brian

Invalid execution GUID. Work item could not be completed.

Hi People,
Lately, users have been complaining a lot of Invalid execution GUID. Work item could not be completed. What does it mean exactly, in a general sense, as I know it depends on the error. But what is the general consensus of such an occurence?

John,
check this link
http://mailman.mit.edu/pipermail/sap-wug/2007-February/025056.html
Thanks
Bala Duvvuri

Enable 'process all items' option in shopping cart display/edit screen

Hi All,
'Process all items' option is disable in the shopping cart view/edit screen. How can I enable the said option ?
It there any authorization object or attribute needed for enable 'process all items' option ?
For your information, this botton is appear next to Delete option in shopping cart item level.
Thanks,
Regards,
Jennifer

Hi,
if you want to enable or disable any option or field in SRM portal find the web component of the field by right clicking on it, Then enhance the web component and in the post exit of WDModify_view add the code for enabling or disabling the field.
Which will definetly work.
Regards,
Goutam Kolluru.

"Workflow Template Create" screen appears while executing the work item.

Hi,
I am learning the workflow. I have created a test workflow in which there is a user decision step and 2 mail sending steps for the outcomes of the user decision.The workflow is activated properly . When I excute the workflow the screen for "Workflow Template Create" opens everytime. When I go to the Business workpkace a mail is there in my inbox with the title as given in the user decision step. Again when i am trying to execute the work item in the inbox again the same screen for "Workflow Template create " is opening. I am totaly confused with this problem . Pls suggest what might be the reason..?

I think the Wflow Template Creation screen is not opening but your current session is getting closed so the previous session which is Wflow Create one which you have already opened is appearing. Please check your template design and act accordingly.
Thanks
Arghadip

HELP QUICK!! photo not showing up in edit screen???

so, I've downloaded the images from my camera, looked all through...they were fine, but when I go back to work on them - only some show when I choose to edit or open in cs2 - the rest, I just get a blank screen. I have a client coming to view proofs in 4 hours, and suddenly half her photos are missing - PLEASE HELP?
laureen

one more bit of info - went back into the iphoto library for these photos, and it's only showing 48 out of 120 photos - the rest say "couldn't open the file. It may be corrupt or a file format that preview doesn't recognize.
not sounding good?
laureen

Add field not showing in contacts edit screen

Trying to add nick names to the contact list in IPhone 6, but the "add field" prompt is not showing. Tips?

Well first of all PL10 has some addon-issues (I don't think they affect Screen Painter since that is only UI-API but I would not recommend it...)
Regarding the problem...
What you should try to do is go to "C:\Program Files\SAP\SAP Business One" (Perhaps "C:\Program Files\SAP Manage\SAP Business One") and delete or rename files "AddOnsInstall.sbo" and "AddOnsLocalRegistration.sbo".. These files controls installed addons on the client, and if you remove them the addon will try to reinstall the addon...
Also try to go to %temp%\SM_OBS_DLL and delete/rename this as well... Controls versions of the SDK and there might be some left-overs from older versions
If that not work try to go to the SARI table in the SBO-Common and delete the record regarding the Screen Painter
If all the fails the old trick to uninstall the SDK, DI-API and client and reinstall them again sometimes solves the problems... (I know... Lots of things can go wrong in SBo and I've seen most of them)

Iphoto 11 has black edit screen

My iphoto 11 pictures are not visible in the edit screen and the slideshow will not run. I've tried everything that I know and I'm at the point of deleteing iPhoto and do a clean install. However, I'm not clear on the procedures and if I need to purchase iPhoto (it came pre-installed on my mid 2010 macbook pro). Or should I need do a clean install on my mountain lion?

Next move:
reinstall iPhoto.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.

Execution of multiple workflow items in inbox

Weu2019d like to have the possibility to approve more than 1 work item at the same time (same task). We can select more than 1 item but when we approve, we still have to approve each one of them. In the personal workflow settings I couldnu2019t find the option "Transfer of Execution to Other Work Items Possible". I also check in customizing u201CChange Presettings for Personal Workflow Settings - Further settingsu201D but I donu2019t find this option. Do I need to change something else in the customizing (release 6.4 - 6405.5.23.1024)?
Thanks for your help

Giulia,
This is not possible via SBWP. However you can always create a custom program. The program will collect and show workitems pending for current user.
You can show the list in a tabular form. User can select more than 1 item.
Once selection is over you can approve the workitem via the program.
However there is some catch - some hardcoding will be needed.
This is because the program should know what options a particular decision task provide. For eg, 1 task could give only approve as option whereas other may give as approve and reject both,
You can also put task specific settings in custom table to secure future workflow additions. Need to put some logic in your program to handle that.
I do not have access to system at present. Try searching for FMs to get workitems in the inbox.
Hope this helps

Work items are not visible UWL task are visible in tracking in portal

HI
Friends
i am new from sap Ess/Mss implementation project...
i am facing an Problem " Work items are not visible under UWL in portal overview page"
but i am configured all the ess/mss related things....and also Created for one user for Requester(send Leave Request)...and one more user for App-rover(Apporve an Leave)..
Requestor send an Leave through portal send it successfully......but i am facing a problem in uwl under work items are not showing in overview page...but in tracking work items are (Leave request)showing.....work items are not showing in uwl TASK(VERY PROBLEM)...
i am configured and also registered UWL IN PORTAL..it is good..
in sap ecc i can assigned UWL_SERVICE user to roles
1.SAP_BC_BMT_WFM_UWL_ADMIN
2.SAP_BC_BMT_WFM_UWL_END_USER
3.SAP_BC_ADMIN_USER
4.SAP_BC_UWL_SERVICE
PLEASE HELP ME.
Tanks
Shaik Rafi

Hi All,
In such cases, please try to check as below :
1) Create Leave request work item from Employee and check the same under the UWL Tracking tab of employee.
2) Log-in to swi5 transaction of the respective back end system and give "US" -> manager's UserID -> Choose Tasks to be completed from the drop down -> Remove any date if mentioned -> Execute.
3) Here if you can see the Leave request created, but not on the portal, it reflects some portal issue like sync.
4) If no leave request work item is seen here, then there is a problem in the employee manager mapping or the workflow setup.
5) In such cases, you can try to check the Swi1 and check the log of that workflow to understand the current status of the Leave request.
Revert if further help is needed with more info.
Reward points if found useful.
Regards,
Shri vidya S

Agent not receiving work item assigned to him

Dear gurus,
we're using SRM server 550 with SP08. We are using n-step workflow for contract change version. The approvers are being determined by reading from a table. In total there are 8 approvers determined. We then add one more approver manually. Then we do the approval. The approver1 manage to approve the contract successfully. However the problem come when approver2 want to approve, in which the contract not appear in his inbox.
When we check the contract again, we still see the approver as approver2, with slight difference in which there is no information "In approval since xxxx".
Can anyone suggest how can we prevent this to happen? And what can we do if such case happens?
Best regards,
John

Hi,
Why do you want to add the approver manually?
where do you add the approver? as second approver?
In the N-step badi , system will always retrieve the approver based on the coding in the BADI.
In the Badi you will be specifying the index for each of the approver involved in the approval chain.
looks like in your case , system is not able to identify the correct approver and so the work item is not send out.
is the approval flow working correctly without an added approver?
regards

HTML Client: How to display the edit screen of an item given its ID?

To edit a selected item, I could easily add a new button on the command line and choose the existing method, "editSelected"
But how to edit another item instead of the selected item? Like How to edit an item whose ID # is 10? i.e How to display the edit screen for an item with ID # 10?

The methods such as 'editSelected' apply to screen property collections. Picking these pre-selected options automatically configure the parameter as '<my-collection>.selectedItem'.
If you want an action not directly related to the screen properties then you can choose one of the screen commands under the 'Navigation' list starting with 'show', as in 'show<my-screen-name'. If the screen command accepts parameters then you can
configure the parameter passing manually. In your example, if you added a local 'int' data property to the screen you could assign the ID to that and bind the parameter passed to the screen to that.
In the instances when not even that is sufficient, well then you write your own custom method.
Dave
Dave Baker | AIDE for LightSwitch | Xpert360 blog | twitter : @xpert360 | Xpert360 website | Opinions are my own. For better forums, remember to mark posts as helpful/answer.

Navigator panel display not accurate representation.

I've just tried my hand at converting a photograph to a simulated oil painting. The final step was to select Filter>Texture>Texturizer. I then faded that adjustment (Ctrl Shift F) to achieve the degree of texture I desired.
I then noticed that the Navigator panel display a much stronger and harsher amount of texture. I'm using a dual monitor setup and I first assumed that the difference was between the monitors. But, I drug the navigator panel over to my main monitor and it was the same there. When I printed the photo it was OK, but I hesitated printing it, not being sure which was the correct display.
Main Display
Navigator
Anyone else have this problem? Is this difference normal?

Hi John,
Just out of curiosity I tried following your footsteps and found that with OpenGL turned off the effect levels visible in the main window and Navigator palettes seem about the same. But with OpenGL on I believe you could say that the Navigator window there was a larger difference. Knowing what I know about OpenGL resampling (and guessing Adobe enables the highest quality resampling), the main window, when zoomed to other than 100% is probably the better representation of the actual effect level in the image.
Screen captures below...
OpenGL Turned Off
OpenGL Turned On
So I guess you could say what you're seeing is typical. Given that the Navigator panel is mostly for seeing where you are in the image I guess it's nothing to worry about.
Did your print come out looking just like you expected per the main editing window?
-Noel

My nokia N-70 Music Edition Screen displayed blank...

Hi
nokia N-70 Music Edition Screen displayed blank after few hours.After Removing battery,put again & start it becomes ok for few hours.I have already updated the Software Nokia N-70 but no advantage.
Wht should i do?

strange enough some of the pre-installed apps on the N70 are on the memory card and not the phone memory. which means formatting the memory card will remove everything. it's difficult to get everything back but try these :
1- try to find what you need on the n70 support page
http://europe.nokia.com/A4144775
check phone software.
2- if you have the download app installed on your phone , run it and check for the app there.if not check the nokia download store. http://www.download.nokia.com/
3- if your mamory card is not the original provided with the phone, locate your old memory card. using a computer copy and paste the following folders from the old original one to the new one:
* resource
* sys
* private (copy the subdirectories only and not the whole folder)
4- if something is still missing after all this, i guess it's gone for good
Fear not those who argue but those who dodge

Some JPG images, stored in DB, do not display on screen/image item.

Hi friends,
I have a form to save and retrieve images (JPG, GIF, TIF) to and from DB, using WEBUTIL_FILE_TRANSFER.CLIENT_TO_DB and CLIENT_IMAGE.WRITE_IMAGE_FILE respectively.
It’s working fine, but with few JPG images, it stores in DB but do not display on screen/image item.
Secondly, if I try to retrieve and write this JPG to OS (using CLIENT_IMAGE.WRITE_IMAGE_FILE), it prompts error “FRM-47101: Cannot write image file”.
Environment:
Forms [32 Bit] Version 10.1.2.0.2
OS XP Pro 2002 SP3
Oracle DB 11g Enterprise Edition Rel. 11.1.0.7.0 - 64bit
Any help will be highly appreciated.

Hi,
I have done a workaround here, which worked for me.
My requirement is to direct save images in DB. So my system was just saving images without knowing if picture would display on form or not later.
I created a (non-DB) image item on form and added a code (CLIENT_IMAGE.READ_IMAGE_FILE) to place image in this image item, if it successfully display image then save image directly in DB using code (WEBUTIL_FILE_TRANSFER.CLIENT_TO_DB).
Note: - If CLIENT_IMAGE.READ_IMAGE_FILE fails it raises exception and it means image has invalid format/internal data header and system does not save image in DB.
Now I have a kind of a filter to stop saving pictures which do not display later on form. :)
Edited by: user12173428 on 29/09/2011 16:38

Not navigating to display/edit screen on execution of a work item

Similar Messages

Maybe you are looking for