Not Playing Radio

I like listening to Deutsche Welle on iTunes. However, starting a few weeks ago, Deutsche Welle isn't playing while all the other radio stations still work.
Any ideas?

Apple's pri.kts-af.net is having some issues at the moment. It's been reported to Apple. No idea how long it will take them to act on the report, but I provided some fairly detailed info on the errors in a message I sent to my contact at iTunes Radio this morning.
Hopefully someone at Apple will be able to get it resolved.
The problem is random and intermittent... if you try tuning in a few times, you'll eventually connect to a station okay. You can always visit a station's website and tune in that way as well. Hope this helps.

Similar Messages

  • Bash update - iTunes not playing radio

    I play a local radio station via iTunes.  After installing the bash shell update for 10.9.5 the station no longer plays.  Also if I use the station's Flash player to try to play via Safari that method also fails without any specific error message.  Anyone else having a problem like this after installing the bash update?

    Went out for a walk and started iTunes again and it is working just fine.  Go figure.
    Problems resolved.

  • Is it Ok that newly purchased iMac gets Hot not just Warm, and smells sometimes like burnt plastic?? Just by using safari for mails And playing Radio??? Or i must throw it!! since Can't get any Direct contact to Apple!!!

    IS IT OK that a newly purchased  iMac -intel Lion- gets So HOT That it smells like Burnt Plastic,Not Warm but  Hot!!??.. Just only by using safari-reading mails or newspapers- And playing Radio with VLC??!!!!...Or i must throw it away before it explodes??!!...Since Not possible to contact direct Apple to replace it !!!!..-they send me automatically from one adress to the other And No reply!!.THANKS!!

    I don't know where you live or what you're talking about being sent from one address to another.  Your iMac has a 90 day warranty with tech support and service, if needed.  Apple has toll-free phone numbers in the US.  You call that number, get to speak to a tech, give that person your computer's serial number and describe the problem.  I suspect that there are similar arrangements in other parts of the world.  That is "direct contact" with Apple.  Have you tried to do that where you live?  Wny are you trying to communicate in writing (by e-mail?)?  In addition, if you don't have Apple Care you should immediately purchase it if you're still eligible.  It'll extend your warranty to 3 full years.

  • ITunes Ver 10.6 Radio will not play behind firewall

    iTunes Ver 10.6 Radio will not play behind firewall while version 10.5 works just fine.
    I uninstalled and reinstalled a fresh version of 10.6 rather than just upgrading and still not working.
    Our Firewall is BlueCoat....
    Works just fine outside the firewall..
    Anyone have any suggestions?
    Thanks in Advance
    david

    Update:
    I also noticed that version 10.5 doesn't prompt for Proxy credentials while version 10.6 does...
    thanks in advance
    d

  • Radio Playlist does not play with Photos

    I have created a "Radio" playlist and synced to my Apple TV (Playlist containing internet radio). It works perfectly as long as I hear it as "music", but as soon as I choose that playlist to be played in combination with Photos, it does not play (while photos are being shown). Any idea?
    Alex

    Can't say I'm surprised really.
    We didn't really have internet radio playlists until a few months ago.
    It should be straightforward to add, but I doubt it would be a high priority addition.
    Request it here:
    http://www.apple.com/feedback/appletv.html
    AC

  • I have transferred all my music from iTunes onto my USB to play on my car audio radio. The radio reads the music but does not play it in sequence. There is a specific way to save the music into folders and name them. I have a Pioneer DEH-2350UBSW.

    I have transferred all my music from iTunes onto my USB to play on my car radio. The radio reads the music but does not play it in sequence. So it plays certain folders, then it skips folders. in certain folders it skips tracks. apparently there is a specific way to save the music into folders onto the USB with regard to naming the tracks and folders.. I have a Pioneer DEH-2350UBSW. Can anyone please help.

    It is a stick, Cruzer Blade 16gig.
    In the manual it says the following about the USB storage device:
    1. Playable folder hierarchy is up to 8 tiers
    2. Playable folders up to 500
    3. Playable files up to 15 000
    Under sequence of audio files it says that the user cannot assign folder numbers and specify playback sequences with this unit. It also gives an example of a hierarchy:
    01 - folder
    Under that is 02 which is also a folder
    Under that are compressed audio files 01 to 05: folder number
    Under that there is another folder same concept as above - I have attached that part of the manual in this response.
    I named my folder - Folder 001 Artists name and then in that folder I added the tracks as:
    001 Song title
    002 song title
    It played the 1st song in the folder and skipped to the next folder, I can't even locate the other tracks.
    On another folder I saved 31 songs but only 29 played so I am not sure whether there is a limit.
    All I need is an example of how to number and name everything.

  • Two I-Tunes radio stations do not play.  What do I do?

    Hello:
    On my laptop, my two favorite I-Tunes radio stations do not play.  They are DI-Hardstyle and DI-Tribal House under Electronica.  When I play them, they either skip to another station or it just gets stuck saying "getting playlist." I did not used to have this problem and I don't have it on my other computer.  What can I do to listen to them again?   Thank you.

    Since the "UPGRADE" I am unable to play my radio station that I have listened to before without problems. Now what? I am beginning to regret this iTunes 7 "UPGRADE." I am a member of the station and have always listened to it at
    http://wxpnsc.streamguys.com/listen.pls
    However since "iTunes 7" all I get is the station's intro. followed by NOTHING or going through the iTunes Library, following the xpn.org intro. the next song in my Library is played; the same happens when I attempt to access with Safari. Please tell me how to correct this?
    iMac G5   Mac OS X (10.4.7)  

  • Music player nd radio not playing

    I cant play music in music player nd my radio is not playing.it is writing not enough memory.pls wat shld i do

    It would be helpful to provide the exact model of the phone you have the said issues with!

  • Radio Widgets not playing.

    I've downloaded some radio widgets to my Dashboard but despite being connected to the internet they will not play the radio station.
    Any ideas as to why greatly appriciated
    Thanks

    What widgets are you trying to use? Try this one. It works for me.
    Dave M.
    MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
    Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch)

  • ITunes Radio quickly scrolling songs and not playing any music

    On both a iPhone 4 and 4S when a station is played it just scrolls through all of the songs really fast and does not play anything.  Is anyone else seeing this behavior? 
    iOS 7 and on work (aka not manged by me) WiFi
    Am not experiencing this behavior on WiFi at home.
    This leads me to believe work network has TCP ports 8000-8999 and 42000-42999 blocked.
    Is anyone else seeing this behavior...or can confirm my suspecion?

    I'm having this problem as well.  I used to listen to iTunes radio at work frequently.  But the past few months or so, it simply fast scrolls through songs (on any station).  I'm lucky if I get one song to play and then the scrolling starts.  I do not have this problem with my WiFi at home, so I suspect it has something to do with the WiFi at work.  Just wondering if anyone found any settings to change or a workaround to the issue?
    I agree with sounds_good; I wish Apple would find a solution with a future iOS update as I miss iTunes radio while at work!
    And I find it odd that Pandora has never been problematic like iTunes radio is...

  • How do I get iTunes to keep playing (radio) when I am not using the compute

    How do I get iTunes to keep playing - radio or CD - when the computer is otherwise idle? It cuts off after about 5 minutes and goes into sleep mode. thanks,
    Vlasta

    Hey vlasta4444,
    It sounds like you'll want to change the time it takes for the computer to goto sleep from System Preferences> Energy Saver.
    http://docs.info.apple.com/article.html?path=Mac/10.5/en/10330.html
    Jason

  • Connect to car, IPOD Classic pauses and will not play

    Hello to all,
    First of all I am not very good at computer stuff. I used my IPOD Classic for about three months with a car kit and all was fine. All of a sudden it stopped playing. I figured out that the IPOD pauses when it is connected to the wire from the car. I have tried connecting it with the car off, on, radio off, on all with the same result, as soon as the IPOD detects the wire it pauses. My radio will only play the IPOD not control it. Any ideas?? This is driving me mad. I don't understand why it worked for months and then suddenly stopped. Thanks in advance for any help.
    Matt

    I'm having the same problem. I updated my ipod in itunes and now my car's usb deck will not recognize the ipod. It had been working for years without a problem. I emailed kenwood and they said apple pushed out an update that is causing compatibility issues with car decks. They suggested a "soft reset" which did nothing. Kenwood told me to contact Apple and Apple wants me to pay for support. Guess I'll surf around this forum till I find a way to revert back to an older version of the ipod software.
    Here's the thread from kenwood:
    Dear Mr. Lapteff,
    Thank you for contacting Kenwood USA Corporation. We value you as a Kenwood customer and appreciate the opportunity to be of assistance.
    I understand you are having an issue with playing back your Ipod. If you recently updated your Ipod to the newer iOS4 software version we recommend attempting to soft reset the Ipod and attempt reconnecting to your head unit. The available updates from Apple have caused some issues with connectivity. For information on resetting your Ipod we recommend visiting www.apple.com.
    Please feel free to contact us again with any additional questions.
    Steve
    Product Support Representative
    Kenwood USA Corporation
    Area: Car & Home
    Topic: Troubleshooting
    First Name: andrew
    Last Name: lapteff
    Email: [email protected]
    Product Model: KDC-MP342U
    Zip/Postal Code: 19128
    Subject: Ipod won't play via usb
    Body: After working perfectly for years, my Ipod will not play on my KDC-MP342U for the last 2 weeks. The KDC-MP342U just flashes, "reading" but never syncs. I tried resetting and restoring my Ipod, but I still can't get it to work on my deck.
    Any help would be greatly appreciated,
    Andy Lapteff:)

  • Creative MediaSource will not play certain MP3

    I have a Creative Audigy 2 NX with a remote that I really want to be able to use. Programs such as GIRDER, WinLIRC, and uICE do not support the RM-500 remote control.
    I can't figure out how to control the remote beyond editing and creating key files that send ASCII commands, but the problem with that is I cannot control programs that are not currently acti've. In other words, I cannot control winamp if I'm playing a game with my remote, which is what I want to do. The KEY files are structured as this:[KeyEvent690 etc]KeyName=whateveryouwantdisplayedNotification=- or 2 or 4KeyEventRemap=this is the important partHandleByApp=i don't know what this doesAnyway, if I set notification to -, I can send ASCII commands-- BUT these will not send to programs not currently on top. If I set notification to 2, as Creative did in their Winamp .x key file, I could control the program even if it is not on top-- BUT I DO NOT KNOW HOW TO FIGURE OUT WHAT THE KeyEventRemaps NUMBERS SHOULD BE. I cannot find this information, and I have tested as far as I am capable of doing manually (tested numbers through 500 MANUALLY).So what I want to be able to do is use my remote to control winamp, but that is impossible. And Creative MediaSource will not play streaming audio (for God knows why...). So what I decided to do was record to an MP3 player with a third party program and play that MP3 in the Creative MediaSource software (the built-in recorder will NOT work, as I cannot structure that into a playlist nor can I play the recording media nor can I minimize the program and mute the feedback-- I can only record if I'm playing, and this doesn't work). The first problem I encountered was several programs would not output MP3s that were playable as they were being recorded, however I finally did find one. This program, 3aLab iRadio, allows the MP3 to be played back WHILE simultaneously being recorded. The only problem is that this the Creative MediaSource software will NOT play the mp3. Out of the 5 different MP3 players I tested, ONLY the Creative MediaSource software would not playback the MP3 as being written. I cannot figure this out, and I am at a loss as to what to do next. I realize that Creative won't support streaming audio with their player, MediaSource, but what I like to do is listen to streaming internet radio as an item on my mp3 playlist in winamp. I wish to be able to control this with my remote, but as I cannot find ANY WAY out there to control my remote as I wish without further information, this is a dead end. My alternati've is to use the Creative software for which the remote was designed to work, but unfortunately this does not support streaming internet radio nor does it support MP3s that are being written to. This is driving me insane.
    What I want to be able to do is have a playlist that I control with my remote, with the first item on the list being internet radio, the 2nd and such on down being MP3s. In winamp, this is doable, as well as in Windows Media Player, and most MP3 players out there. Since I cannot do this in Creative's software, I need a workaround alternati've. PLEASE.
    So, in conclusion, is there anyone out there who can either tell me how to control my remote directly by identifying what the notification=2 keyeventremap=configuarions are, give me a program like girder however which supports the RM-500 remote, or tell me how to get MP3s that are being written to (aka incomplete) to play in the Creative MediaSource software?
    Thank you very much for your time.
    Message Edited by PzyX on 0-5-2005 08: PM

    Sky_Blue wrote:
    Hey ppl. I own a Zen neeon which i bought in Hong Kong. I can't play any of the tracks and i don't know why. Can i still transfer them to my mp3 or will they not work?
    I am afraid that you need to provide more detail steps of your problem.Message Edited by micromouse on 0-04-2006 0:52 AM

  • Help! My phone will not play sound when an app is open?!

    Seemingly out of the blue, my iPhone stopped playing sound through the external speaker. This began about a month or two ago and I have been unable to fix the problem. The sound will play through the external speaker until I open another app (safari, camera, etc.). The sound used to work through headphones until this morning. Now the sound won't work... At all! I brought my phone to an apple store a week ago and the first guy checked my phone with a flashlight and told me first that there didn't seem to be any water damage. Then, some other technician helped me. He opened iTunes and miraculously, the song played! I couldn't believe it was magically working. He explained that it looked like my dock connector was looking a little eroded and that is why the sound doesn't work. He said he could try to brush it out and that should fix the problem. Tried my phone later... Volume doesn't work anymore! The dock connector works fine otherwise, I am still able to charge my phone. My phone will not play music via bluetooth speaker. I talked to multiple people on the phone who all seem to think it's a software problem... I am really not understanding what is going on with my phone! I have googled this problem many times in the last few months and most people say that it turned out to be a software issue. I have checked both water indicators (in the dock connector and the headphone plug, right?) with a flashlight and I don't see any red... Any insight or ways to fix this would be very appreciated! The whole thing makes no sense to me.

    Are you using an APple charger or a thrid-party one?  I ask because if you are using a third party charger, it may not be wired properly and it may be telling your iPhone that the cable connected is also an audio interface so your iPhone may be sending the audio signals through the cable to the charger.  I have a charger in my truck that also doubles as an FM transmitter so I can play my iPhone audio through the truck radio.  Your charger may be doing something similar, especially if it is not an Apple charger.

  • ITunes 10.6.3 not playing song previews at all

    Since Wednesday my iTunes 10.6.3 is not palying song previews at all. Clicking the play radio button shows it response as poitning at it I can see teh stop button. But no sound no movement on the playback progress bar at the top. I have upgared to Mountain Lion but this problem started a  week before the upgrade. I have reinstalled iTunes twice and checked on my other Macbook same problem. Frustrating as one cannot buy song beofre previewing.

    Hi,
    yes I understand that. I assume that your mac is "authorized"?  You might also have a problem with IPV6 causing interferrence.  Have a look here: https://discussions.apple.com/thread/3202188?start=0&tstart=0
    to turn off IPV6.

Maybe you are looking for