Not pleased with PreEl 11 dual monitor mode

finally got PreEl 11 working on my PC and do not like the dual monitor mode. in previous PreEl programs i could detact the monitor and out it in to another screen and still have all the tools on the other screen. now the monitor and most of the tools move with the monitor so i have a split work space. not very handy at all. i am HOPING that someone can figure out a way to move just the monitor and not everything else with it...

If you've got a feature request, you should contact Adobe on their web site. (They're likely developing the next version now, so it's a good time to do so!)
This is a user-to-user help forum. We can't do anything about the interface itself. (And, yes, breaking it into a timeline and everything else is really the only option for version 11.)

Similar Messages

Elements 11 Preview Window not visible in dual monitor mode

When I go to dual monitor mode the preview window is hidden. I can still hear the audio from the clip but I can't see the video window. It is still hidden when I switch back to single monitor mode. The only way to bring it back is to close out the program and reopen it. Does anyone know where it goes and how to make it visible?

MAINEEDIT
I have just set up for Premiere Elements 11 Dual Monitor Mode in Windows 8 64 bit computer.
How do you have your monitors set up...Extend Across.. or other?
I am not having any problems keeping track of what I believe you are referring to as the "Preview Window". So please excuse
if I double check with you via the following screenshot.
Preview Window which can be brought up
a. double clicking the file in Project Assets
b. double clicking the file on the Expert workspace Timeline
I am going to go over this one more time with my Premiere Elements 11 and Windows 8 64 bt computer to see
if I can create the situation that I am interpreting that you have.
Thanks.
ATR
Add On...This especially makes me ask....
When I reopen the program the preview window appears in its normal position.
The Preview Window is going to close when you save/close the project. As you saying that you re-opened the project
to find the Preview Window opened?

Slideshow on 1st monitor (while in dual monitor mode)

Apparently, Lightroom expects you to always use the second monitor for slideshows and does not allow you to use the first (no options available as far I my research went).
My 1st monitor is bigger and would be my choice for slideshow presentations. I am sure I'm not the only person with this setup.
(BTW: I don't quite understand why there's two shortcuts for slideshows on a Mac - "Cmd + Return" and "Shift + Alt + Cmd + Return". In dual monitor mode they do exactly the same, even though the distinction suggests they would have something to do with the target monitor...)

me too originally! Until I remembered that LR never works like that!! The module system can sometimes get confusing trying to remember which things apply throughout LR and which things only on a module...however there is usually some way round every problem in the end,and one of the joys (or frustration dependant on how busy I am) is discovering it.

Silverlight 5 WebBrowser Control - Is the SL5 WebBrowser control is set to work in IE7 mode only? I have a 3rd party web site i'm hosting and now they will not work with IE 7 Compatibility mode. Looks like this control can't detect I'm setup for IE 9.

Silverlight 5 WebBrowser Control - Is the SL5 WebBrowser control is set to work in IE7 mode only? I have a 3rd party web site I'm hosting and now they will not work with IE 7 Compatibility mode. Looks like this control can't detect I'm setup for IE 9. I'm
running IE 11 with registry hack for IE 9. I think the SL5 webbrowser control is set to work only in IE 7. can some one verify this or tell me how to set the WebBrowser control up to run either IE8, 9, 10 or 11? I have same issue with machines running IE 8
and above. This Silverlight 5 application is running out of browser with the elevated privileges (hack) and at test certificates install in proper stores. This application has been running for 2.5 years. Vender switch on some changes a couple days ago that
broke this application. Help!!

Hi,
It seems there is nothing to do with IE mode.
Please make sure your link still can be accessed.
The WebBrowser displays HTML content in applications running in a Silverlight 4 or later out-of-browser applications or in Silverlight 5 in-browser trusted applications only.
For more infromation,please check link below:
http://msdn.microsoft.com/en-us/library/system.windows.controls.webbrowser(v=vs.95).aspx
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to enable a dual monitor mode

I have a MSI FX52000 VTD-128 board which suppose to support a dual monitor mode. It has D-Sub analog, DVI and VIVO connectors.
Would it be possible to connest primary monitor to DVI and secondary to analog output or only Video Out can be used for the secondary monitor?

Have you installed the latest "Forceware" Drivers?...I think MSI's 52.70's are great...How you should go about setting up for two displays is to go into NVIDIA Driver Control Panel>trouble shooting>Click on the "Detect Displays" Button after you connect the other monitor ...Sean REILLY875

Bridge cc expand to dual monitor mode when copying or deleting photos?

why does bridge cc expand to dual monitor mode when copying or deleting photos?

You say your running 10.5.6? Why haven't you updated to 10.5.8?
FWIW, I never had color issues under 10.5.X, however I have since upgrade to 10.6.
See the thread I started in which Adobe responded:
http://forums.adobe.com/thread/483359

Dual monitor mode causes lag in edit response

Has anyone seen this problem? In single monitor mode the response to edit moves is quite fast, in dual monitor mode that is a frustrating lag in response. Thanks in advance for any help you can share.

whatisthis wrote:I had the same problem. Fixed it by downgrading upower to version 0.9.7
The bug has been reported
Thanks a ton, I was trying to figure this out now and then and was getting frustrated.

Please help with these dual monitor problem

Ok,
Well i am a final cut pro editor and i have a power mac g5 with 1.6 ghz.Its an older one but it runs great for what i need done. Anyway i wanted to go dual monitors so i went out bought a monitor and set it in place. However my graphics card only had 1 DVI PORT (Which had my main monitor on) and the other one was a ADC port. I bought a ADC to DVI-D and then realized it was the wrong one. Those Adaptors are very hard to fine, so i made up my mind a decided to forget that and get another graphics card. However i am not very good with that stuff and i really dont know which one to buy. Some others gave me a list but they were not the same as mine (slots didnt match)
*Here is my card that i have now*
http://www.layton-family.net/stuff/stuff_files/image008.jpg
Can someone point me in the right direction about going to best buy and picking up a new one that will hold dual monitors and still run motion at a good level.
Thannks

If you could find a real ADC to DVI-I adapter, it would work, but the Dr. Botts ADC to DVI adapter
<http://eshop.macsales.com/item/Dr%2E%20Bott/ADCDVII/>
will not work with a DVI to VGA adapter. It does have a dual-link DVI-I connector, but the pins for analog video (and dual link) do not connect to anything. They use this connector because some non-Apple digital displays come with DVI-I and/or dual-link DVI plugs, when they only need DVI-D signals. The Dr; Botts adapter and (all others that I have seen) are only ADC to DVI-D. Even if they connect the dual-link pins from the ADC to the DVI connector, the result will be single-link DVI-D, since no ADC cards provide dual-link signals. There is no reason (other than cost) why an adapter couldn't connect the analog video signals from ADC to a DVI-I connector, but I don't know of any that do.
From their web-page:
"DVI Extractor II makes an ADC-compatible display out of virtually any third-party flat panel display"
Note they say "flat panel".
You need an ADC to VGA adapter. They are listed from $40 to $150. Still less than a compatible replacement graphics card, although you can get a card faster than you current one, if you pay enough.

AMD/ATI driver problems on a Dell laptop with attached dual monitors

I have a Dell Precision M4800 laptop with a docking station for two additional monitors. I'm shooting for a "big desktop" setup, with my laptop display and the two external monitors forming one large multi-monitor X screen.
When deciding which video driver I'd need, I did the usual:
$ lspci | grep VGA
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Venus XT [Radeon HD 8800M Series]
Which is weird, because the M4800 isn't shipped with 8800M cards. Rather, it's shipped with the AMD FirePro M5100 Mobility Pro (see above link) (also, too many "Pros", AMD...).
I tried the open-source driver, but I couldn't get both my external monitors working in tandem, so I went with catalyst-test, since the non-beta version of the proprietary driver doesn't support the 3.13 kernel (or my alleged 8800M series card, for what it's worth).
My display setup using catalyst-test is still far from ideal. My dual (horizontally adjacent) monitors reset to cloned/mirrored desktops after every reboot, and my machine refuses to show three monitors (dual monitors + laptop display), even with the 2GB of dedicated RAM in my graphics card (see above M4800 link). There's other miscellaneous annoyances as well.
Using hardinfo, I see that my VGA driver thinks it only has 256MB of RAM... which doesn't align with the M4800 specs. Is there a way to change this value?
Just today, I found the catalyst-firepro driver, which I think might be the correct driver for my laptop, at least given the specs on the M4800 from the website.
There's also the option of not using my AMD card at all, and just using the Intel graphics on my laptop. (I had to disable hybrid graphics in my BIOS to get any AMD-specific drivers to work). I'd like to steer away from this, due to the performance loss, but I'd be willing to make the change if the pros outweighed the cons.
As I see it, I have a few options:
AMD/ATI open source driver: Can't seem to get two monitors working, much less three...
catalyst-test: Any two monitors will work together, but not three. Other annoyances.
catalyst-firepro: Have not tested yet.
Intel open-source driver with AMD card disabled: Have not tested yet.
Can anyone who has had similar issues and/or hardware offer a best course of action which has worked for them? I know we're supposed to avoid "opinion" questions, but I think this is grounded enough in the scientific method to merit some helpful responses.
Any help is appreciated.
Thanks!

clfarron4 wrote:
The last option to me is screaming catalyst-pxp at me, because that's one of the few options if you have integrated graphics and a discrete graphics card.
Let me get this straight: Can you disable the either or both of the Intel/AMD graphics in the BIOS settings? If so, but don't want to disable either, you might want to look at the hybrid graphics section of the wiki.
I know about powerXpress and I think I'd like to avoid it. My experience with hybrid graphics on other Linux distributions is that it's rather unstable or just plain unsupported. If someone can convince me otherwise, given their experience with hybrid graphics on Arch/Linux, I might reconsider.
I'm fairly certain I can enable either of my GPU's separately, but I'll have to check for sure next I reboot my PC.
The last option I mentioned because I thought the Intel drivers might be more robust than the AMD drivers, which have don't have a sterling reputation when it comes to supporting Linux (compared to nVidia anyways, who I know in the past have had good Linux support).

With different dual monitors can you choose which image to print

I have dual monitors which I calibrate but they still look different. I have lightroom on the main screen with a full loupe view on monitor 2, I would like to print this image (on monitor 2 ) as its easier to see the changes during develop because its bigger. Is this possible or does lightroom only print the image either on the main screen or in the main lightroom module

You are only previewing through the monitor profile. It does nothing else in the chain to Print. There's no conversion done between monitor profiles and printer profile, just Lightroom's internal working profile and the printer profile. Photoshop converts between the working profile and the printer profile, again the monitor profile is only applied to what you see on the screen. The actual process of colour matching can never be 100% exact, but can get close under ideal viewing conditions. The screen emits light, whereas the print must be lit, and takes on the colour of the light in the environment. High end printers will viewing stations with with which to determine print accuracy.. a luxury most of us won't.
In more simpler terms, make the print. Compare it to the monitors under good daylight and gauge from there which is closest to the print.

Mac mini late 2012 not working with small VGA monitor

I got a mac mini (late 2012 10.8.4 all updates installed) and it is working fine with samsung b2230 via VGA adapter. There is a small VGA monitor (PL8006 max at 1024*768) which works fine when connected to a PC.
When I connect the small VGA monitor to mac mini it is not displaying anything (monitor shows blue screen with letters VGA so I assue it is not getting any signal). Mac's resolution is set to 1024*768 with 60Hz (even tried with 800*600 without any success). Monitor is also not working with win 7 installed in mac mini using bootcamp.
Any thoughts?

i just found that when the VGA cable of the small monitor is slightly inserted into the VGA adaptor it works fine (this is not usable because there is no way to keep the pins at that level) and when the pins inserted fully / moved little it is not working. Since this happens only between these two devices can't find which one is faulty.

HT2471 MacBook air is not connecting with my Thunderbolt monitor...should be easy fix but i cannot figure out

I have been using my MacBook Air with Thunderbolt monitor for a few months with no problems... Now I connected my laptop to my monitor and I am not getting a connection. Please help

It's possible that the W2 you used was set up with the EchoSign service. It allows you to draw a signature with a mouse. This is available as well with more recent versions of Reader (10.1+) if the form isn't Reader-enabled or secured. You will see this in the Sign panel when the document is opened in Reader.
You can otherwise get an EchoSign account and upload your document and send it to your customers through the EchoSign service. You can establish a free account to see how it works.

TS3408 I am unable to use Safari because the web pages fail to load or does not load graphics. I am not pleased with the current Safari and will now have to use a secondary browser.

My issues is with multiple websites. Buttons do not work, pages do not load completly or the graphics are not visible. I need to use another browser such as FIrefox or Chrome.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Intermittent screen flash in dual monitor mode?

I've developed an interesting problem - A few months back there existed some fault with kde's treatment of the xf86-video-ati drivers which meant that, if you had compositing enabled, it would randomly segfault and die. This was slightly irritating.
So, recently, In an act of pure, stupid, and uninformed optimism, I decided to see what would happen if I just asked pacman to upgrade me to the latest version of kde (In case the problem from before has been fixed - for comedic effect).
This went predictably badly, although the fault in question does appear to have been fixed. However, as part of it's dependencies the new kde brought in new ATI drivers, and somewhere along the way an entirely new and exciting fault that causes my secondary monitor's image to flash to black for about 1 second in 7 has been picked up.
From my own investigating/googling so far, I've determined this is something to do with KMS and my display drivers. The flashing persists even in text mode, but only affects the secondary screen (The other one works fine). If I add nomodeset to my grub kernel boot line then the flashing ceases in text mode, but Xorg segfaults when I try and start it.
Has anyone else encountered this particular fault? Any advice on how to fix it?
Thanks!

Thanks for working that out, but I'm still horribly confused. I've been tinkering with things today to improve my boot speed (new kernel, messing with module loading and so on), and the problem seems to have gone away by itself. I have at no stage had anything to do with upower (it hasn't been installed).
How perplexing.
Anyway, problem solved, thanks everyone, and well done Sayo for working out the problem! (Even if it appears that MY problem was unrelated )

IPhoto cant switch monitor profiles in dual monitor mode

Hi,
my problem is that i am using iPhoto 6 (newest version) with the internal screen of my macbook and an external screen. Both are calibrated. Most programms like Photoshop or Capture one or Aperture switch the profiles of the monitors while going from one to another. You can see that, it just takes half a second and the correct color is displayed. iPhoto seems to be not capable of that feature. It stays all the time with the profile of the main monitor selected in ColorSync.
Does anybody else notice this or am i the only one?
The Apple Care Hotline couldnt help at all...
Btw. It is exactly the same problem with Safari.
Cheers
Axel

Thank you Terence for your reply.
I think you are right. But nevertheless I need to know what I am dealing with. Sometimes I am just not sure wether running on the correct profile or not. That makes work sometimes a bit difficult.
Also I am angry because it took me a few days and a thousend nervs to find out what the problem is. Apple doesnt know of this program as far as they told me. I wonder if this is a known "bug" or if this should not be the way it is. Maybe these programs are usually able to switch the profiles. I just dont know. That is what I want to know.
Cheers
Axel

Not pleased with PreEl 11 dual monitor mode

Similar Messages

Maybe you are looking for