[Not Possible] Move ~/.config/Trolltech.conf somewhere else?
Is there an environment variable or something similar I can set to move the QT configuration file? I'd like to move it to `~/.config/QT/Trolltech.conf` (or even better `~/.config/QT/config.conf`)
Last edited by EvanPurkhiser (2014-04-30 08:53:36)
Depending on what your intentions are, another option would be to create a symbolic link:
$ mv ~/.config/Trolltech.conf ~/.config/QT/config.conf
$ ln -s ~/.config/QT/config.conf ~/.config/Trolltech.conf
Of course the original file will still be there in the form of a symbolic link, but if all you want to do is give it a more understandable name then it might help. I myself can never remember that the configuration file for Qt is called "Trolltech.conf".
...By the way, "config.conf" is a terrible name for a file, right up there with "text.txt", "document.doc", and "jpg.jpg".
Similar Messages
-
When i want to download au video to work on it, it says that it not possible because of codec or something else i d'ont know how to say in english. It is impossible to do anything.
barbara.glet
Thanks for the reply. I need to zero in on your situation a bit more with your help...
When you go to import your .mts file into Premiere Elements 9.0/9.0.1 and you cannot, do you see this type of message only where your specific file
would be named as not support
From Premiere Elements 9.0/9.0.1 using Get Media/Files and Folders
or
Are up looking for your file in the space to the right and wanting to drag it to the Timeline, but you see the thumbnail
with the two arrows on page as seen in panasonic_lumix_dmc_ thumbnail in screenshot below.
But, that has two arrows, one red and the other green. And, you wrote that your two arrows were red.
Or something else other than what is shown above.
If it is as represented in the second screenshot, it is likely that you moved, deleted, or rename that file once it was imported
at another time into the Elements Organizer. In that case, we need to reconnect the file to the project. More on that later
once you supply the above details.
Thanks.
ATR -
I used to always check my data useage on my phone
SEttings: General: Useage so I could keep track of it and I would reset on the
day my phone provider account reset - since doing the update iOS 7.0.4 I cannot
find this option anymore - does anybody know if the option is still there and has
been moved somewhere else or the option is now just gone? Any ideas would
be greatly appreciatedIf you are referring to the cellular usage, it is now located in Settings>Cellular. That will give you phone call usage and cellular data usage.
-
Iphoto would not import movies from Iphone 4 - ANYBODY ELSE HAS ISSUES?
Hello,
Yes Iphone 4 is so sexy.
I have reception issues too unfortunatly , only where reception is weak anyway, but yes it happens...
also iphoto would not import most of the times
the iphone 4 videos?
any suggestions why and how to fix it ?
Many thx
AnterosI was encountering this on the developers' beta of iTunes 9.2 on a gigabyte-sized iPhone 4 movie. (I am in Developer Program.)
I just reinstalled with the standard iTunes download and was able to do a successful import directly from the phone.
Perhaps an iTunes reinstall can fix it for you as it did for me.
-- Andrew -
Qosimo G20: Wlan WEP settings not possible running Config free?
Hi!
I have a Qosimo G20 running XP media center as OS.
Default Toshiba ConfigFree is installed.
Tried to find out how to set WEP key, but trying to do so in network config/settings task was halted with a message.
This message referring to Microsoft KB 871122.
Wireless Zero Configuration seams to be replaced by ConfigFree (or other software I'm not aware of).
I can not follow the instruction as I see it as I have ConfigFree installed.
Have anyone out there encountered this problem and solved it?
/JonasHi
ConfigFree is a monitoring tool and helps you to monitor your connection. It allows you to pick up the information about used connections and helps you to have a better overview.
You can not use this tool for network configuration. If you want to do this please do this:
- activate the WiFi card at first
- go into Control panel > Network Connections > right mouse click on Wireless network and choose Properties
- under "preferred networks" add your WLAN and configure "Data encryption"
I hope that will help you.
Good luck! -
Move my iWeb site somewhere else
Since the end of mobileme, my website has stopped working. How can i make it work again?
Can you try and explain it in the simplest steps as possible please!
ThanksiWeb has two options for publishing your website..
http://www.iwebformusicians.com/iWeb/Publish-Website.html
Here's some info about what to look for when choosing hosting...
http://www.iwebformusicians.com/iWeb/Website-Hosting.html
If you had a domain name for you site on MobileMe you need to contact your registrar to get it to point to the new location of your files.
If you don't have a domain name, most hosting services will provide a free registration.
Once you have published your site to the new server, make sure you redo the SEO...
http://www.iwebformusicians.com/Search-Engine-Optimization/SEO.html -
Dear Apple, why is not possible in the year 2014...sync to my iPhone just content I want to separety, without the whole sync procedur(backinup,syncing whole purchased things and stuff like that) When I want to have in my phone for example just 3 new songs ..I dont wanna wait 10minutes because of whole synchronization!!! I want add to my iPhone just these 3 songs thats it! Would be perfect, If you will make possible to sync just parts like MUSIC, Apps, Fotos, separetly and not alltime together...it s****!
Ok.
I have Windows OS and iTunes for PC, but the problem is not in my PC, but in synchronization. Your synchronization take minute or two, you have thunderbolt lightning cable??? If is it by you really so quick than ok but by me is it with sync really slow and I have still powerhouse notebook.
I dont know how is it possible that your sync is so quick, but my iPhone starts transfering purchased aplications and all content to the PC, instead of downloading it PC itself without iPhone from iStore. So there is what happend when I am conecting my iPhone.
When it find my iPhone on the first try, it starts makeing backup, than transfering photos, aplication, some info from Safari and to the end also the MUSIC...this should be improved by Apple and it should be able to sync just MUSIC section and not whole system, when I changed just something in MUSIC section(like adding new CD..)
So it does on PC whole resync Maybe is it somewhere in options, but where? I really want sync sometimes just MUSIC or just Apps and nothing else(like Photos, Bookmarks...)
I am sorry for that angry tone, but I am really stresedby this 20minutes sync or 10 miutes...just becouse of adding 1-2 songs, this is by competition phones quicklier :/ !
Message was edited by: Tenotitlan -
Goods movement not possible with mvmt type 109
Hello All!
I have following problem. I try to book the goods receipt with VL32n and movement type 109 and get following message: M7096 Goods movement not possible with mvmt type 109
- First I created a PO with Confirmation Control Key Inbound delivery
- Goods receipt ist booked with movement type 107 with MIGO
- I created an inbound delivery with movement type 109
Finally I want to book with VL32n the goods receipt, but the booking fails with error message 109. Any idea why.
Regarding some OSS notes, I thought that it could work this way.
Hoping for help,
Barbarai am not sure that i read you correctly
the process for inbound delivery is
create PO; in PO conf control key set to inbound del.
create inbound del in vl31n
do MIGO on inbound del
if the inbound del is with 107 mvmt type the GR will bring it to valuated block stock
do 109 to move it from valuated block stock to unresticted stock. -
Move or drag icons from Add-on bar to navigation bar or somewhere else
How can I move or drag icons from Add-on bar to navigation bar or somewhere else?
I want close my Add-on bar that looks not so handsome and move its app icons to tab bar or etc. can I do this and if yes how?
Thanks.I think I figured this out. Got to the toolbar that you want to pull these icons to and right click on an open space and select "customize". This will then open that box which contains icons that you can choose from to drag to that bar. Now look at the icons on your add-on bar and drag the ones that you want to that box vs directly to the toolbar. You can now drag those icons from the box to the toolbar. I did it with two extension icons that I wanted up top because having it on that stupid looking toolbar at the bottom looks lame. At least it does to me:)
-
Whenever I try to save a file as a PDF, it tells me that it can't save, because the file is open somewhere else. I don't have anything else open. I have also tried different files and they all say the same thing. Help.
Given there are so many problems and removed features in Pages 5, why not just continue using Pages '09?
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&mforum=iworktipsn trick
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=432&mforum=iworktips ntrick
Peter -
When I connect my iPhone 5 to my laptop and iTunes, I can't play movies from the iPhone on my computer.Why is that? Can I do this or it's not possible with iPhone5? With my iPod it's no problem.
Reinstall iTunes. Make sure you follow the instructions in this support document to the letter. http://support.apple.com/kb/HT1923.
You may have some problems because Apple has not certified that everything works with Windows 8 yet. -
Firefox 4 will not let me keep my bookmarks listed on the side bar. I can open them there but once I click somewhere else they go away. On previous Firefox versions I could display my bookmark folders down the left side of my screen and just leave them there, accessing saved bookmarks when I needed to. Now with FF4 I can open a vertical column of my bookmark folders by clicking on bookmarks in the navigation bar but this won't stay there; if I click elsewhere they disappear. I could put a bookmark toolbar on my screen but this takes up more vertical space. I have lots of horizontal space that's unused. How can I go back to the display of bookmarks in previous versions?
You can fix that by going to View -> Sidebar and click on Bookmarks.
Or you could simply use a shortcut
''control + B'' -
Goods movement not possible with mvmt type 991
Hi,
As per requirement I need to create a GR for Purchase order wise. I tried to create using BAPI BAPI_GOODSMVT_CREATE but It returns the error message.
error: Goods movement not possible with mvmt type 991
LOOP AT gt_outtab1.
gt_outtab1-gr_wght = gt_outtab1-gr_wght.
MOVE: gt_outtab1-matnr TO gt_item-material,
gt_zseed_po_qty-werks TO gt_item-plant,
gt_zseed_po_qty-lgort TO gt_item-stge_loc,
'901' TO gt_item-move_type,
gt_outtab1-gr_wght TO gt_item-entry_qnt,
'B' TO gt_item-mvt_ind,
'1' TO gt_item-stck_type,
v_lifnr TO gt_item-vendor,
gt_outtab1-ebeln TO gt_item-po_number,
gt_outtab1-ebelp TO gt_item-po_item.
APPEND gt_item.
ENDLOOP.
CLEAR gt_item.
LOOP AT gt_outtab3 WHERE bqty IS NOT INITIAL.
MOVE: gt_outtab3-bmatnr TO gt_item-material,
gt_zseed_po_qty-werks TO gt_item-plant,
gt_zseed_po_qty-lgort TO gt_item-stge_loc,
'991' TO gt_item-move_type,
gt_outtab3-bqty TO gt_item-entry_qnt,
'' TO gt_item-mvt_ind,
'1' TO gt_item-stck_type,
v_lifnr TO gt_item-vendor.
APPEND gt_item.
ENDLOOP.
CLEAR gt_item.
LOOP AT gt_outtab3 WHERE pqty IS NOT INITIAL.
MOVE: gt_outtab3-bmatnr TO gt_item-material,
gt_zseed_po_qty-werks TO gt_item-plant,
gt_zseed_po_qty-lgort TO gt_item-stge_loc,
'942' TO gt_item-move_type,
gt_outtab3-pqty TO gt_item-entry_qnt,
'' TO gt_item-mvt_ind,
'1' TO gt_item-stck_type,
v_lifnr TO gt_item-vendor.
APPEND gt_item.
ENDLOOP.
***********Call goods movement BAPI
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
EXPORTING
goodsmvt_header = gs_header
goodsmvt_code = gs_code
IMPORTING
goodsmvt_headret = gs_headret
materialdocument = gs_retmtd
matdocumentyear = gs_year
TABLES
goodsmvt_item = gt_item
return = gt_return.
so could you please let me know which are the parameters I need to pass to create GR?
regards,
tarunHi,
Go to T.code OMJJ . Give your your movement type 991. Check the allowed transaction and all the details in your left hand side and the settings done.
Thanks
Arbind -
Idoc mbgmcr02 movement type 311 .. goods movement not possible w/mvmt type
i am using we19 to create a test idoc...i have the ports and partners filled in...i am using movement type 311..i have the material , the plant, the storage location...the qty..i have the move material, the move plant and move storage location filled in...
when i use standard inbound processing it generates the idoc..i go to we02 and look at the idoc..in the status records i get status 51 goods movement not possible with mvmt type 311..????what am i missing
if i do the exact same thing with the transaction migo...works fine...
am i missing something????i am trying to move material from one location to another using IDOC MBGMCR02..
I am entering the following...
E1BP2017_GM_Code=04
in e1BP2017_GM_ITEM_Create
Material=CON2020
Plant=3000
Stg_Loc=0001
Move_Type=311
Entry Qty=001
Move_Mat=Con2020
Move_Plant=3000
Move_Stloc=0002
Mvt_Ind=??????
In the Mvt_Ind I have tried E,K,M,Q
the in get a status 51 Update Control of Movement Type is incorrect(entry311XX_K)....
Is E1BP2017_GM_CODE = 4 correct???
What should be the Mvt_Ind??? -
Goods movement not possible with movement type 702
Hi experts,
I have created a new movement type 702 (a copy of 602) for return delivery from customer.
When I create delivery I did not face any issue. However while doing post goods issue, I get error
"Goods Movement not possible with mvmt type 702."
Is there any configuration missing for post goods issue?
Please advise.
Thanks,
PriDEAR,
AFTER CHECKING IN "OMJJ" ...SEE WHETHER YOU HAVE NOT BLOCKED THIS MOVEMENT...
ALSO SEE IN OPTION WHETHER ALL TRANSACTIONS HAVE BEEN ENTERED LIKE
"MI01"
"MI02"
"MI31"
"MI07"
"MI37"
WE ARE PERFOMING THIS ACTIVITY USUALY SO PLZ PERFORM IT,,WE ACTUALLY BLOCK THIS MOVT TYPE AFTER ARE PHYSICAL INVENTORY...
OR EVEN IF THESE DOESNT WORK..
GO TO "SU01" IN WHICH PUT THE USER ID AND CHECK IN AUTHORISATION WHICH PROFILE IS ASSIGNED TO IT..
REGARDS
REWA
Maybe you are looking for
-
App-V 5 sp2, Citrix user profile manager and Event IDs 19104
Hi, the environment: Full Infrastructure, Appv 5 sp2 Client on server 2008r2, xenapp 6.5 and Citrix user profile manager. We get the event error 19104 on published packages. But not on all users. %APPDATA%\Microsoft\AppV\Client\VFS and %LOCALAPPDATA%
-
How to check verison of Best Practice Baseline in existing ECC system?
Hi Expert, How to check verison of Best Practice Baseline in existing ECC system such as v1.603 or v1.604? Any help will be appriciate. Sayan
-
Muse converting jpegs to .pngs, ballooning size
The photos in a Muse site I created recently were loading very slowly, so I uploaded the files into Dreamweaver to see what was happening. To my shock, here's what I found when I reviewed one of the photos: The original (linked photo): a 640 X 480 jp
-
Deployment Error in OAM Console
Hi team, I installed the oracle weblogic server 10.3.6,oracle access management 11g and also i create the rcu.After i starting the admin server and oam server all the applications are deployed successully but oamconsole application status is sho
-
How to retrieve documents I erased even from my trash?
Good day to all I am new to this ....and hope to find some help. I deleted some documents and then emptied the trash!!! I still can see the said documents in my document folder but under ALIAS Is there a way I can retrieve those? from the hard drive