Not possible to determine a condition type for the price in ME49
Hi,
While saving the price in ME49 i.e. comparision of Quotation i am getting below error:
Not possible to determine a condition type for the price
Message no. 06657
Diagnosis
When it attempted to generate the time-dependent conditions for the price you entered, the system was unable to determine a condition type. Price determination is therefore not possible.
Procedure
Contact your system administrator.
The latter can maintain the calculation schema assigned to the purchasing document using the Implementation Guide (IMG).
Utsav
Hi Utsav,
You can refer to the following link. it might be useful to you
RFQ price
Thanks
Nisha
Similar Messages
-
RFQ - Header Condition (Not possible to determine a condition type)
Hi,
I have defined my own Condition Schema for RFQ Item Condition are working fine. But when i am trying to add header condition it is giving msg "Not possible to determine a condition type"
RegardsHi,
I have defined my own Condition Schema for RFQ Item Condition are working fine. But when i am trying to add header condition it is giving msg "Not possible to determine a condition type" and now allowing me to enter the condition on header level.
Regards
Edited by: Kashif Ihsan on Jun 14, 2010 3:52 PM -
Purchase info record BDC Condition type for gross price
Hi,
I have got flat file with vendor material plant porg conditon type price.
It has to be posted to SAP purchase info record.
The first condition type is always for gross price.
How can I validate whether the condition type given in the file will be for gross price and will be applicable for that vendor or material given in the file.
Regards,
PraveenCheck with A017 Table
Thanks
Seshu -
after the update to 10.9.4, it is not possible anymore to choose a folder in my iphoto library for the screen saver
Problem solved after the third! reboot!
-
SQ01 to show condition types for the Billing doc
Dear Friends,
I need to show 3 cost condition types from a invoice in SQ01
For eg
The Query has for eg
Billing Doc Material Net value ZT07 ZT08 ZT09
The ZT07/8/9 are conditiontypes
I need to link these at item level in SQ01, which tables should be linked
Please help
Kind Regards Ravi Kumar RathHi Ravi
Please use the following tables for SQ01
KONV Conditions (Transaction Data)
KONP Conditions (Item)
VBRP Billing Item data
T685
Regards
Srinath -
How can I delete a condition type or the price in the debit memo
Hi Friends,
please help me
I have a query regarding raising a debit memo in SAP 4.7 (transaction VA01)
I have to charge a company Euro 2112.70 and I don't want to add any VAT on it. The customer is a one-off third party customer code and the material is Sundry Sales. After I enter the price condition ZP00 for Euro 2112.70 the system adds 17.5% VAT on top of this. How could I delete the VAT element or change it to zero?
RajSo you need to charge a customer without VAT tax.
As there are many ways to do that, including the so no recommended procedure of deleting the tax condition, you firsy have to analyse why the company want to do that.
If its specifically to that customer, you can manage that via TAX determination for that customer. (From customer master).
As I'm not good at TAX conditions, I recomend you to check that on SAP help.
One I was required to do something like that. In last instance you can add in your pricing procedure one new condition in a sequence "bellow" of your MWST condition.
I hope i could help you...
Best regards,
demas -
Condition types for works tax, SDT,MANDI TAX
Hi All,
are there any condition types for the following:
Mandi Tax,
other taxes(any other taxes)
state development taxes,
works tax
entry tax
it is required to create condition types and put in pricing schema in po or these condition types are defined in tax code and are copied in pricing procedure.
thanks and regardsthanks for giving your valuable time,
We are on ECC 6.0, and these conditions are not appearing in the condition table. I could not go thru these conditions. I referred the SAP NOTE NO 9552289, validity since 8.1.2007 where in the attachment of TAXINN with screen shot is there.
Further clarification
In the forum it was mentioned JVRD - VAT Non deductible and JVCS - CST deductible, is it a typing error. My writing is not for pointing you as wrong, but for taking the understanding.
I appreciate your knowledge and great understanding on subject.
regards -
Double or more same condition type on the sales order item view
Dear expert,
We have two condition type for the material price.
PR00 : For automatically pricing from material price list. (For example : 50 EUR)
ZAD6 : For manually price enter by user (For example : 100 EUR)
When I enter to ZAD6, last price is available on the net value. (100 EUR).
But when I enter second time to ZAD6 (For example : 150 EUR), in this case all ZAD6 lines are adding to detail's of item condition view. I shown below:
Condirion view example :
Line1 : PR00 50 EUR
Line2 : ZAD6 100 EUR
Line3 : ZAD6 150 EUR
Net value : 150 EUR
My problem is:
At the result, item net value is true, but when I look Item overview I saw first manually enter's price (100 EUR)
I shown below:
CnType: ZAD6 Amount : 100 EUR Net price : 150 EUR
Thank you !
Gülay Çelik
Siemens TRThis has been discussed many times in the forum. Please search before posting.
Please note that if both the condition types has a Condition Class as B (Prices) only one pricing condition in the lowest level ( step number ) will be active and rest are made inactive by the system. This is a standard behavior. So If you have two, you may need to change the first one to be a discount or surcharge in V/06
thanks
G. Lakshmipathi -
Not Possible to determine condition type- supplementry condition STO sch ag
Dear All ,
While creating the stock transfer scheduling agreement in the transaction ME37, Stock transfer pricing schema is getting is picked up. where the standard condition type :P101 is being used for picking the Material valuation price of the supplying plant.
Now for adding the delivery cost or any other conditions , while we are trying to enter other conditions in the Item Conditions in ME37, system is giving an error message "NOT POSSIBLE TO DETERMINE THE CONDITION TYPE".
As NO Access sequence is attached to the condition type : P101, and at the same time, Supplementry pricing procedure is assigned to the condition type : P101.
When we assign the access sequence(e.g 0002) to the conditon type P101 , then system allows us to give the supplementry conditons while creating the scheduling agreement , BUT at the same time material valuation price from supplying plant is not getting picked up in either scheduling agreement or stock transfer order.
Requirement is that BOTH material valuation price as well as system allows us to give the supplementry conditions in the scheduling agreeement.
Thanks & Regards
Nitin Chhabra.
-
Not possible to determine shipping data for material in PO(STO)
I
m doing STO for intra copmany code(plant to plant stock transfer),I have done all STO setting ,maintain material with plant and storage condition,loading groups , maintain customer with storage condition,created vendor with supplying plant.setting is done for supplying plant and receiving plant .
Supplying and receiving plant combination with document type UB.delivery type NL and checking rule RP.Also maintain sales area for both plant.
But when I m creating PO in ME21N below error is showing..
*Not possible to determine shipping data for material ,kindly suggest if I have missed any setting...
Regards,
VipinHi Sharan,
Thanks for your reply.
problem got solved but in different way ,STO setting was wrong.
I didn't maintain delivery document type(NL) on plant level It was maintain at storage location that's why system couldn't determine shipping info for material.
Please check the setting below.
IMG> MM>Purchasing>Purchase order>STO>STO between storage location>set up storage location -dependent shipping point determination>define rule for determination of sipping point>
here we have to set delivery document type(NL) to plant specific shipping point determination. -
Received this error (The workflow could not update the item, possibly because one or more columns for the item require a different type of information.) recently on a workflow that was
working fine and no changes were made to the workflow.
I have tried a few suggestions, i.e. adding a pause before any ‘Update’ action (which didn’t help because the workflow past this action without incident); checked the data type being written
to the fields (the correct data types are being written); and we even checked the list schema to ensure the list names and the internal names are aligned (they
are), but we still cannot figure out why the workflow is still throwing this error.
We located the area within the workflow step where it is failing and we inserted a logging action to determine if the workflow would execute the logging action but it did not, but wrote the same error message.
The workflow is a Reusable Approval workflow designed in SharePoint Designer 2010 and attached to a content type.
The form associated with the list was modified in InfoPath 2010.
Approvers would provide their approval in the InfoPath form which is then read by the workflow.
Side note - items created after the workflow throws this Unknown Error some seem to be working fine.
We have deleted the item in question and re-added it with no effect.
Based on what we were able to determine there don’t seem to be any consistency with how this issue is behaving.
Any suggestions on how to further investigate this issue in order to find the root cause would be greatly appreciated?
CheersHi,
I understand that the reusable workflow doesn’t work properly now. Have you tried to remove the Update list item action to see whether the workflow can run without issue?
If the workflow runs perfectly when the Update list item action is removed, then you need to check whether there are errors in the update action. Check whether the values have been changed.
Thanks,
Entan Ming
Entan Ming
TechNet Community Support -
I got error "The workflow could not update the item, possibly because one or more columns for the item require a different type of information "I found out the cause is Update Item action
I need to update item in another List call Customer Report ,the field call "Issues" with data type "Choice" to yes
then the error arise . please help..Thanks for the quick response Nikhil.
Our SPF 2010 server is relatively small to many setups I am sure. The list with the issue only has 4456 items and there are a few associated lists, eg lookups, Tasks, etc see below for count.
Site Lists
Engagements = 4456 (Errors on this list, primary list for activity)
Tasks = 7711 (All workflow tasks from all site lists)
Clients = 4396 (Lookup from Engagements, Tslips, etc)
Workflow History = 584930 (I periodically run a cleanup on this and try to keep it under 400k)
Tslips = 3522 (Engagements list can create items here, but overall not much interaction between lists)
A few other lists that are used by workflows to lookup associations that are fairly static and under 50 items, eg "Parters Admin" used to lookup a partners executive admin to assign a task.
Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties. -
Not possible to determine posting period for date
Hi SAP Guru
While Creating the Shipment cost document in [VI01] transaction I am getting the error
Not possible to determine posting period for date with error Message no. SE105. There is no long text available
Please provide the solution for the same
Regards
RahulHi Friend,
Check the posting periods for the company code in OB62 and OMSY.
Check whether they are in currenct date or not.
if not maintain them in MMPV for Company code.and OB62 for the fiscal year variant.
regards,
santosh -
Not possible to determine shipping data for material in intra company STO
Hi,
just trying to set up a STO material movement between two plants belonging to same company code,sto customization is done,i have chosen raw material whose stock got maintained in both plants........when trying to post it gives an error message ....NOT POSSIBLE TO DETERMINE SHIPPING DATA FOR THE MATERIAL...COULD SOME ONE HELP ME...SPRO->Material Management->purchasing->scheduling Agreement->Setup Stock transport scheduling Agreement->Define shipping data for plants.
Select the particular plant and click on details there also you have to maintain the same customer that you have maintained in J1ID.
Then it will allow to create Stock transport order.
I did the same thing it was working for me.
Edited by: Vanitha Krishnamurthy on Jul 27, 2010 12:07 PM -
Not possible to determine shipping point when creating STSA
Dear experts,
I would like to have delivery creation for STSA (new STSA type - ZLU). I set below configs however when i create STSA, the error msg occur - Not possible to determine shipping point for item 00010. would you advise? thanks.
Config to have:
1. Assign delivery type ZNL for STSA document type ZLU and supply plant 5395
2. Define shipping data for both receiving plant & supplying plant with customer no and sales data
3. Maintain shipping point determination for supply plant: shipping condition (from receiving plant - customer# ) 02 , loading group 0001 in sales/plant view for supply plant-> US01
Master data:
1. maintain sales view for both supply/receiving plant
2. purchasing view for receiving plantHi
Kindly check your sales order type STSA in VOV8. If there is any default shipping condition is assigned under shipping tab.
Maybe you are looking for
-
Experiencing similar problem as other posts, screen flickers/flutters, at start up and getting worse.After 3/5 minutes it goes normal . Very disappointed with H.P. they want nothing to do with it as the warranty run out. Bought it at Future Shop and
-
Apache 2.0 and Tomcat 4.1 (help)
I have spent the last few days trying to serve JSP's using Apache 2.0 in conjunction with Tomcat 4.1 with zero results. I am rather frazzled and am about to abandon the thought of using anything Java for a long time. I have found several resources th
-
I am running windows 8.1 do i need Adobe Flash Player?
I am running windows 8.1. i am not to sure wether i managed to install thr R.T update. Anyway my Mcfee anti virus scanner is saying its critical that i install Adobe Flash Player. What do I do? I am not to clever wit computers so I find this all abi
-
Problem with ImageIO.read()
I have a problem with loading picture from file to variable Image img. Function ImageIO.read(fileIn) return always null pointer (whereas fileIn!=null). I'm using j2sdk-1_4_2_0. The same problem problem is in WindowsXP SP2 and Fedora 3 64bit. Here is
-
Hi, Is it possible to calculate the Withold Tax with value in Decimal places? i.e., If the base amount is 11111 and the withold tax % is 3 then the WT amount is 333.33 wherein SAP calculates it as 333 only. We had recently implemented B1 in Thailand