Not possible to select the button i want with the remote on my menu..please help

Am I missing somthing? I have my menu all set up in DVD Studio Pro. Everything works fine on the simulator. After burning the DVD and playing it on a computer where i can use my cursor to pick the button, everything works fine. However, when i put it on a DVD player, the buttons are never highlighted..i can't pick and choose a button with my remote. Is there something else i need to do for this to work? Please help.
Greg

Nevermind.... i figured it out myself.

Similar Messages

Hi When i create the downpayment process in the invoice i get amount as value but my requirement is in percentage even after i select the percentage basis milestone billing please help what can be done

Hi When i create the downpayment process in the invoice i get amount as value but my requirement is in percentage even after i select the percentage basis milestone billing please help what can be done

downpayment percentage , so if i want 50 percent of order value to be paid and when i go to faz type the invoice is created for 0 value that 50 percent of the amount is not getting calculated , where as when i enter in order same as 50 percent in amount it gets calculated in invoice, any help ?

HT204074 I wish to re attach my device to my iTunes account but I do not appear to have the manage devices option - someone please help

I wish to re attach my device to my iTunes account but I do not appear to have the manage devices option - someone please help

If you want to add it then you need to do one of the 3 things mentioned on that page e.g. use iTunes Match on your iPad, use automatic downloads on it, or redownload one of your past purchases. I think that the 'manage devices' section will only show when you have one or more devices/computers associated to your account, if you don't have any associated then it won't appear.

I upgrade my iph4 to ios 7.1.2 and the microphone is not working on video camera, is not working anymor also the microfon on speaker mode, please help me

Hy guys, i upgrade my ios 7.1.1 to 7.1.2 and now iths not working anymore my microphone on video record, the camera is working , is recording but without sound, and also the microphone on speaker, when i activat the speaker the microphon is not working. I do a full reset on my iph but still not working , also my girlfriend have same problem.Please help me, thx.

To rule out a software issue, try to set it up as new device, without using the latest backup, explained in this article:
How to back up your data and set up as a new device
If this does not help, the problem might be hardware related and the phone needs to be serviced by Apple or an Authorized Apple Service Provider:
iPhone - Contact Support - Apple Support

It appears that I someone tried installing CS3 and Professional 8 on my computer. I can not uninstall any of the items. Can you please help? I can not open anything coming on to my computer.

I have color, ps, illustrator, fonts, camera raw, CS3 premium, Flash 9 plug in... I can not uninstall any of these things. I can not make changes, updates, or uninstall

Adobe Creative Suite Cleaner Tool
helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
http://www.adobe.com/support/contact/cscleanertool.html
Adobe Reader and Acrobat Cleaner Tool
The cleaner removes a standalone installation of Reader or Acrobat, including any preferences and settings that may be preserved during a standard program uninstall
http://labs.adobe.com/downloads/acrobatcleaner.html

Creating an index: it's not possible to select a tablespace for the index

Hi,
we are using SQL-Developer Version 3.0.04.
When creating an index it's not possible to select a tablespace for the index. The only choice which is offered by SQL-Developer is <DEFAULT>.
The user itself has privileges on several other tablespaces - and therefore not just only on the default tablespace of the user.
Any help will be appreciated
Rgds
JH

Hi JH,
Well, the capability is somewhat buried in the UI, but it is there.
In the Create Index dialog ...
1. Tick the "Advanced" check-box in the upper right-hand corner.
2. Select "Properties" from the left-hand list (Definition, Properties, Partitions, DDL).
3. Click the Storage Options... button
4. Use the drop-down list to select the desired tablespace.
Return to (2.) and select DDL to see that your tablespace choice is present.
Regards,
Gary
SQL Developer Team
Edited by: Gary Graham on Mar 7, 2012 5:06 PM
And if all you see in the drop-down list is <DEFAULT>, then I would suggest rechecking the user's privileges. Or provide more details about your environment: OS / Database / JDK version, and so on.

Is it not possible to give the select single field without an into clause

Hi,
i have to check whether my input value( only one filed) is available in the table.
for eg i need to check whether company code is available in the table t001.
then i will give .
data lv_bukrs type t001-bukrs.
lv_bukrs = 1010.
select single bukrs from t001 where bukrs = lv_bukrs.
here its asking for me to give a vaible to store the bukrs that is
select single bukrs into dummyvalue from t001 where bukrs = lv_bukrs.
Is it not possible to give the select single fieldname without an into clause

Its Possible by declaring the tables statement
<b>tables : AFKO.
select single * from AFKO where <condition>.</b>
If SINGLE is specified, the resulting set has a single line. If the remaining additions to the SELECT command select more than one line from the database, the first line that is found is entered into the resulting set. The data objects specified after INTO may not be internal tables, and the APPENDING addition may not be used. The addition ORDER BY can also not be used.
An exclusive lock can be set for this line using the FOR UPDATE addition when a single line is being read with SINGLE. The SELECT command is used in this case only if all primary key fields in logical expressions linked by AND are checked to make sure they are the same in the WHERE condition. Otherwise, the resulting set is empty and sy-subrc is set to 8. If the lock causes a deadlock, an exception occurs. If the FOR UPDATE addition is used, the SELECT command circumvents SAP buffering.
Notes
When SINGLE is being specified, the lines to be read should be clearly specified in the WHERE condition, for the sake of efficiency. When the data is read from a database table, the system does this by specifying comparison values for the primary key.
If accessing tables for which SAP buffering is planned for single records, the SAP buffer is bypassed if the addition SINGLE is not specified. This behavior depends on the current implementation of the database interface and may change in future releases. In particular, it should not be used to bypass the SAP buffer. You should use the explicit addition BYPASSING BUFFER for this instead.
The addition SINLGE is not permitted in a subquery.
Regards
- Gopi

It is not possible to configure the selected XI domain

Hi...
PI 7.0 server on Windows environment and database is SQL Server.
PI Server pick and place the messages from r/3 to r/3 in Oneway but in the reverse it is pick the messages from source but it is not place to the target system.
The error messsage in RWB in end to end monitoring...
It is not possible to configure the selected XI domain because the Integration Server does not exist or could not be read from the SLD
In Component monitoring...
500 internal server error
Application error occured during repuest processing..
Thnx
Raj

Thanks for your promp response, tbluong.
The configuration in SXMB_ADM > Integration Engine Configuration is already done and its check (F7) returns success (all green): "Role of Business System: Current Configuration = System Landscape" and "Corresponding Integration Server: Current Configuration = System Landscape".
Any suggestion?
Regards.

Not possible to scroll the menu without lagging - Set Up a Repair service is not working

Hi,
It is not possible to scroll the menu without lagging.
The latest version has been restored but nothing.
I think the touch screen is having some problems.
I wanted to use the Set Up a Repair / Send In for service but it seems that the application form doesn't working.
As soon as push the Continue button, nothing happens.
Is there anybody from Apple who can check this issue please?
Thank You.
Anmary

Restoring a phone from a backup will put the device back to the state it was when the backup took place, i.e. all info that you had on that phone before using the backup will be gone.
You could try to restore the phone, which will back up the actual data on the phone, including the passcode, and use this backup to set up a new phone with. The passcode will still be the same, because it is part of the backup.
More info here, iPhone and iPod touch: Wrong passcode results in red disabled screen
Not being able to fill in the passcode is not much different from forgetting it.
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Also have a look at this one: iTunes: About iOS backups

Since i update my iPhone 5 with IOS 7.0.2, I start to have serious problems to call or receive calls from other telephones: is not possible to open the call at the first try. Somebody have the same problem?

Since i update my iPhone 5 with IOS 7.0.2, I start to have serious problems to call or receive calls from other telephones: is not possible to open the call at the first try. Somebody have the same problem?

Try
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data

Not possible to reverse the document in financial accounting Error

Hi All
We are getting invoice Data from Client
through ACC_EMPLOYEE_PAY02
Document Like
31 45699(vendor )    2356.00
31 45688 (vendor)    1245.00
31 45677 (vendor)    1000.00
31 45666 (vendor)    2000.00
40 Accur(Clearing)       6601.00
In this list some of vendors i did payment Run.
I need to reverse the 1 vendor open Item.
It is showing open item but i am unable to reverse this document.
i tried to FB03 but it is showing Below Error
Not possible to reverse the document in financial accounting
Message no. F5673
Diagnosis
Document '1900000003' in company code '1164' should be reversed. However,
this document was not posted in the Financial Accounting module, HRPAY is, rather, of type ''.
System Response
Documents which were not originally posted in Financial Accounting also cannot be reversed in Financial Accounting.
Procedure
Reverse the original transaction.
You can display the original document from the FI document via 'Environment' -> 'Original doc.'.
I tried to trace Original Document.
trhough Environment -> Original Doc.
ERROR is
Payroll Posting Document 000000091 does not exist
How to Reverse the Open Item.
raju.

Hi,
SAP doesn't allow you to reverse a document in FI if it was created subsequently from another module (in your case HR).
Why don't you use F-44 transaction code to manually clear the open vendor line item and offset it against the same clearing account?
Regards

Command is not showing in to the list on pressing menu button on the device

Hi Everyone,
I have developed a midlet in which I have designed buttons or links using Custom Items. Command associated with the custom item is not showing in to the list on pressing menu button on the device 8300 Curve.
For example - My login screen have SUBMIT and RESET custom items. I have designed them to be appear like links [no matter how I design them]. I have also added a command and listener to it like as below:
CMD_SUBMIT = new Command(text, Command.ITEM, 1);
setDefaultCommand(CMD_SUBMIT);
setItemCommandListener(this);
On running the midlet, my login screen appears. But when I travarse to the SUBMIT item, and press the menu button, my command doesnt appear in the list of commands. It shows only the Close command. I am not getting why this is happening.
Please do me a favour and help me to sort out this. On other phones like 8520 curve the command is appearing in to the list when I press the menu button.
Regards

Is there any way to sort out this issue? I am not getting the cause
behind this, and I am observing this only on 8300 Curve. On most of
there phones [though not tested on every one] it is working as expected.
Please guide me to proceed further. I am desperately waiting for the
response. Regards.

Hi! I went to the new Apple new shop and I was looking for a dock station/ speakers for ipod. Why is not possible to listen the models not in exhibition?! How can I decide?! Just the design?! It's stupid!

Hi! I went to the new Apple new shop and I was looking for a dock station/ speakers for ipod. Why is not possible to listen the models not in exhibition?! How can I decide?! Just the design?! It's stupid!

Hi! I went to the new Apple new shop and I was looking for a dock station/ speakers for ipod. Why is not possible to listen the models not in exhibition?! How can I decide?! Just the design?! It's stupid!

Not possible to reverse the document in financial accounting

Not possible to reverse the document in financial accounting
Message no. F5673
Diagnosis
Document '5000082' in company code '1000' should be reversed. However, this document was not posted in the Financial Accounting module, VBRK is, rather, of type ''.
System Response
Documents which were not originally posted in Financial Accounting also cannot be reversed in Financial Accounting.
Procedure
Reverse the original transaction. You can display the original document from the FI document via 'Environment' -> 'Original doc.'.

Proabably you are using Billing
Reverse at VF11 - Cancel
Other wise go to FB08 and enter FI docuemtn and go to environment and Original document there you can find the Billing number and then go to cancel at VF11

After download itunes installation began in windowx xp near the end of the installation the message says: it was not possible to write the value to the key Software / Classes / .mpg / OpenWithList / iTunes / .exe. Already reinstalled 3 times and always sa

After download itunes installation began in windowx xp near the end of the installation the message says: it was not possible to write the value to the key Software / Classes / .mpg / OpenWithList / iTunes / .exe.
Already reinstalled 3 times and always says the same message.
thank you

Only two had virus on windows XP this week and wiped them with Avast. The itunes asked me to install the update, and so I did. but it always gives me that message.

Not possible to select the button i want with the remote on my menu..please help

Similar Messages

Maybe you are looking for