NOT POWER UP

Only if you ask a question, and please type normally, all caps are hard to read.
Marking your own answer as a solution when it is not is foolish, now your question is marked as solved no-one will come to look at it anymore.
Start again with a new post, type properly and explain the problem clearly.

Similar Messages

8800 does not power on but shows the charging symbol! HELP!

Hello everyone,
I have been searching for days now across the web for a solution to a very bugging situation. A'las i am close to giving up. someone please try and help. So here is the problem: I recently bought a 8800 rim (branded for cingular/AT&T but UNLOCKED) from ebay powerseller with 100% rep. it was advertised in MINt condition.
It arrived two days later and seemed in great physical condition.
So i plug in the charger and let it charge for more than 8 hours. I try turning it on but to no avail. During the charge the screen goes dimly on and shows a battery with an electric bolt going through (I assume that means charging..).
It initially seemed to me as a battery problem. So i took it to a local store and borrowed one of their batteries for 8800 and the phone started working fine also made a call with my temporary T-mobile sim inserted. (although their battery was also on low charge)---
So i come home and with a new OEM 8800 battery. plugged it in and charged for like 4 hours and the screen goes on with the charging symbol but does not power on.
I have repeatedly searched through the WWW and came across wide variety of dilemmas but none were any helpful. I also tried installing the latest OS...which also spectacularly failed [got an error that ...loading failed during the mult-load seesion...or something like that. I followed several very well written guides [advising that the manager and OS be installed on PC and etc.].
SO I MAKE A DESPERATE REQUEST FOR HELP FROM ANYONE OUT THERE WHO CAN HELP. WHAT'S THE DIAGNOSIS WITH THIS BB. IT WAS ABLE TO WORK WITH THE BORROWED BATTERY FROM A LOCAL STORE..EVEN MADE A CALL AND EVERYTHING...BUT WITH THE BATTERY THAT CAME WITH THE eBay PURCHASE AND THE THE BRAND NEW THAT I BOUGHT....IT DOES NOT POWER ON.
BESIDES HOW LONG SHOULD I BE CHARGING IF IT IS NEW OR IF THE PHONE HAS NOT BEEN IN USE FROM SOME TIME??
THANKS IN ADVANCE.
Please help ASAP.
Mirza

How are you charging the BlackBerry? Do you have a wall charger or are you charging via USB cable from your PC? Its also possible that the charging circut in your BlackBerry is faulty. This would explain why a charged battery works while your uncharged battery is not.

My Powerbook will not power up, but I can hear the fan running...

Please help!! My Powerbook will not power up, but I can hear the fan running when I press the power button to attempt to power it up. I just received a new power adapter because it wasn't working properly and it was doing this before and then it worked for a week and now it will not power up at all. It just starts the fan but nothing else turns on. When I plug the adapter, with the battery still connected, it will look as if it is charging but then the light on the plug turns from green to orange then off and doesn't power up at all. If I take the battery out and plug in the adapter, the light stays on but it does not power up except for the fan noise. Does anyone have any suggestions? I also followed the two articles listed online in regards to resetting the power setting and the command + alt + P + R as well. Nothing works. Thanks in advance.....

Same here. If I start up with the power adapter attached, it starts up fine. If I try to start up from battery only, the fan comes on, the sleep light comes on but nothing else happens. I tried letting it sit that way for about 15 minutes and nothing changed. I tried attaching the power cord while in this mode and nothing changed. I tried the PMU reset a couple of times but nothing helps.
This computer is just over 1 year old and I have not had any problems with the power cord (3rd party), the battery, or any problem like this before. It started after a proper shutdown last night and attempt to start without the power cord this afternoon.
Any answers to this yet? I think I'll call on this and report any success to this discussion.
15" PowerBook G4 Mac OS X (10.4.8) 1 GB DDR2 SDRAM, 100 GB HD

Need Help HP DM3 (DM3-1130us) Laptop will not power on. No power at all except for light on a/c jack

Hello, I need some help.
I have a HP DM3-1130us Laptop that will not power on at all.
the only thing that happens when I plug it in is the power jack lights up.
When the power button is used absolutely nothing happens.
No power, no fans, no leds, no on/off cycles, no beebs, absolutely nothing
just the light by the power jack that says the cord is plugged in.
The laptop has Windows 7, 320gb hdd, 4gb ram.
I have tried new power adapter and still nothing.
I have taken the battery out and tried and nothing.
I've tried the option where you take the battery out and hold the power and nothing.
I have tried with different hard drive and no hard drive and nothing.
I have tried reseating the ram and tried new ram modules still nothing.
So I am kind of stumped on what to do, the laptop will just not turn on.
Its not under warranty anymore so cant send it off.
It has not been exposed to any elements(extreme heat or water).
and its never been dropped or anthing.
Im kind of wondering maybe the power button board its self is bad?
If feels fine, its not loose or anything but could it
have just stopped working? for those who are not familiar with this model.
the power button is on the side and is a kind of drag and release button.
Its also on the same board with the Wifi button and 2 Usb ports.
But Im wondering before I buy a new one if this is what it could be.
Or could the motherboard its self be bad?
But even if the motherboard is bad would it still power up
just not post?
Also does anyone know of any other way to try to power this laptop up
without using the slide button. I mean kind of like off a Dv6000 you can power the laptop on by using the Quicklaunch buttons on top but this laptop does not have those.
If anyone can provide any information I would appreciate it.
Thank you.

Hey Tyler,
Unfortunately it is difficult to troubleshoot this type of issue. The majority of the time when the computer wont power on with the same symptoms you described, the power supply board is faulty. Most of the time if the motherboard is bad it should at least turn on or so some signs of life. Like I said, this is most of the time. Sometimes it could do exactly what your experiencing. I would suspect the power supply board has failed since you are not receiving any sort of lights, sounds, etc.
You could check the motherboard for swollen capacitors or loose solder joints but sometimes you wont be able to find anything.
I hope this helps answers your questions,
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

MacBook pro 15' Mid 2009 do not power on.

Hi guys,
Suddenly, my macbook just do not power on anymore. When I press the power button, just the white light in front stays on. But no noise, no image.
Someone knows whats is happening?

Hello SurferHawaii,
Thank you for using Apple Support Communities.
You can use the following article to troubleshoot your startup issues:
Troubleshooting: My computer won't turn on
Regards,
Jeff D.

My iPhone 5s will not power on and I need my serial number for support.

I am attempting to get help through Apple Support- Chat, but I need my serial number. It is not showing up in iTunes under the device preferences. Any other ways to retrieve the serial number through iCloud?
If anyone has any idea of what is going on with my phone, I would love some assistance. I live 45 minutes from the nearest Apple Store. Here's the situation:
About 2 weeks ago, my phone started shutting itself off and restarting randomly.
About a week and a half ago, I would randomly get a blue screen and then the phone would restart multiple times.
About a week ago I turned off Touch ID in an effort to resolve the issue, after reading some fixes from this community. That seemed to help. I do have the animation turned off, so I had read that there may be an issue between the Touch ID and animation reduction. If that had not helped, I was going to turn the animation back on.
Last night my phone seemed fine. I did hear it restart in the middle of the night once, but this morning it will not power on at all.
I tried connecting it to my computer through iTunes, but iTunes does not see it and I cannot access the device information from it.
My phone is less than a month old, and for the first two weeks it worked great. I am taking it into the AT&T Store today where it was purchased, but I don't really have high hopes for a resolution.
Any help is much appreciated!

Sorry AT&T store won't be much help.
I suggest you make an appointment with the Genius bar and then go to the Apple store.

Macbook Pro will not power on without battery installed

Hi there,
I have a Macbook Pro A1226 that fails to power on without a battery installed.
i.e. will not run off AC power on its own. I have tried 2 other power adapters, no change. All 3 adapters are outputting the correct voltage without fluctuations.
But, if I am in OSX with a battery plugged in, shutdown the laptop, remove the battery while AC is still plugged in, it will power back on without any issues. But as soon as I remove the battery, it will not power back on using just AC.
Is this an I/O board issue, or a mainboard?
I have power drained the unit and reset the parameter ram.
Thanks

Any update on this? This is the same thing that's going on with my laptop right now. I was at the Genius Bar and they said they can send it in for repair. Takes 7-9 days and costs a minimum of $310. At the time I was there, my computer wouldn't start up at all, because the battery had drained to less than 20%. It didn't even start with just the power cord (no battery in). The "genius" finally got it to work by doing a PRAM and SMC reset. Got home and was able to recharge my battery to 100%. Used my computer for 2 days before I dared to take it off the power supply. Lo and behold, as soon as I take it off the power cord, then re-connect it, it shows "Not Charging". I tried to do SMC again, but no luck. Keeps saying "not charging". Even tried with a brand new battery. Do I have to get the I/O board thingy replaced?

Blinking Apple...will not power, show in iTunes or recover

My son's 4gen iPod touch will not turn on, show up in iTunes, power up, sync or recover. Here is what it does and what I've tried:
1) plugged in to AC power, a black screen w/Apple in center blinks;
2) plugged into computer, same blinking. iPod does NOT show up in iTunes or in "Safely Remove Hardware" at bottom of computer;
3) Unconnected, the blinking remains;
4) I hold the home and on/off buttons, blinking apple remains;
5) Hold the home key while plugging USB to computer, same result;
I occassionally get the battery indicator with a very slim red line, but after hours both attached to computer or to AC, it does not power up. In fact, the battery indicator lasts only a few seconds before it disappears.
Oh, and it also does not show up as attached in My Computer.
I'm at a loss. Ideas?
If I EVER get it to work, I'll post here the way I did it. Thanks in advance for your help.

You can try to put it on Recovery mode then restore it..
Press or Hold the power and home keys 10 seconds.
Screen goes black, now release the power button
Make sure you do not release the Home key until
your iTunes says "We have detected an itouch
in recovery mode."
After this its simple all you
got to do is a simple restore using your iTunes

Ipod touch generation 5 will not power on

My ipod touch generation 5 will not power on though it was showing to b e fully charged. I have been pressing and holding the on button on the top which usually cause a the screen to light up. Is there some way to get it to work?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My ipod touch will not power on or even be acknowledged by my computer when i plug it in, any suggestions to the problem

My Ipod will not power on, it is fully charged and if I plug in into the computer it doesn't even ackowledge it. Any suggestions?

Try a hard reset and go from there.
Basic troubleshooting steps.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G + 120G OCZ Vertex 3 SSD Boot HD 

HT1339 My ipod was not recognized by itunes and not does not power on after I restarted the ipod service in the Windows admin tools. I cannot restore the ipod since it is not recognized by my PC now. Any suggestions?

My ipod was not recognized by itunes and not does not power on after I restarted the ipod service in the Windows admin tools. I cannot restore the ipod since it is not recognized by my PC now. Any suggestions?

Time to replace it: $49 2nd Gen shuffle at online Apple Store...

My IPOD Touch initially had a white screen. I tried correcting this by restoring default settings via ITunes. The Restore Failed with error 1602 and now the IPOD touch is completely dead. It will not power on or respond when I plug it into my PC via USB

My IPOD Touch initially had a white screen. I tried correcting this by restoring default settings via ITunes. The Restore Failed with error 1602 and now the IPOD touch is completely dead. It will not power on or respond when I plug it into my PC via USB. I get an error on my PC stating that device attached to USB port is not recognizable. Can anyone help?

Error 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Above from:
http://support.apple.com/kb/TS3694

IPhone will not power on after update

Dear Apple,
I currently have your iPhone 3GS which I received approximately 18 months ago. However, after updating the OS Software the device has decided to not power on. After speaking to your Apple Support Centre, they booked me an appointment at Apple Bentall Centre, Kingston, London, UK.
My device was looked at by a representative named Vanessa Baldwin who claimed that the device would not power on and that seeing as it is out of warranty, the only option I had was to replace it costing £139. I then asked to speak to the Store Manager Leigh Baigent, who reiterated Vanessa Baldwin's suggestion. He also added that the device would not power on due to a fault on the motherboard and had nothing to do with the battery. I proceeded to explain to your staff that I would expect a £400 iPhone to last longer than 18 months and that under The Sale of Goods Act 1979, a retailer is responsible for the items they sell for up to six years in England and Wales regardless of warranty. Your staff expressed a blank look towards me as if I spoke a foreign language and dismissed my claims.
I am therefore making formal contact with Apple directly to sort the matter.
Any help would be appreciated, please do not give me a story about warranty / insurance guidelines
I look forward to your response.

I would probably advise you to e-mail, or make contact by phone, rather than making a complaint on the Support communities page.
I hope your lucky in succesfully getting a new iPhone however

HT4061 I cannot switch my IPAD on and it will not power up - i had this problem before and cannot remember how we fixed it?

Can anyone help us please?
I cannot switch my IPAD on and it will not power up - i had this problem before and cannot remember how we fixed it?

Press and hold both the home button and lock button until the apple logo shows up.

I have had my iMac for 55 days now and twice I had to power off/on and then It does not power up correctly. I verified my disk and found errors that could not be repaired. I erased the drive and restored system back to the previous day.

I have had my iMac for 55 days now and twice I had to power off/on and then It does not power up correctly. I verified my disk and found errors that could not be repaired (errors were associated with boot drive) I erased the drive and restored system back to the previous day. Has anyone else experienced this problem?

Since it's a new machine, contact Apple's Support and let them deal with it. Allen's already recommended an Apple repair station visit. Do note that if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you might be eligible for an onsite repair since yours is a desktop machine (depends on where you're located). BTW, the AppleCare Protection Plan's the best warranty policy available for desktop machines. Get it if you don't have it before contacting Apple.
27" i7 iMac (Mid 2011) refurb, OS X Mavericks (10.9.4), ML & SL, G4 450 MP w/Leopard, 9.2.2

Macbook will not power up after software updates

I got my White macbook last week.
This afternoon, I ran a software update which had 6 items including iTunes 8 and OS X updates to 10.5.5.
I left the software update running and upon my return, the Macbook had powered off and I could not power it up again.
Tried everything in the manual and finally called my reseller for an appointment.
I am very surprised that this happened.
Can anyone provide a similar experience or tell me what may have happened?
Thank you.
RJ

iTunes 8 has been known to be killing hard drives on macbooks, so i think that the problem is that your hard drive is toasted/dead. Since its only a week old apple could probably replace it for free for you, but theres a big chance all your data is lost. Also try removing the battery and putting it back in, then start it up. If it starts up but all you see is a folder w/ a question mark it means its corrupt. I would take it to the reseller or an apple genius to check it out (at the apple store)

NOT POWER UP

Similar Messages

Maybe you are looking for