Not print my changes in a barcode Sapscript
Hi everybody, please excuse me mi english is not very good. I have a problem, I am modifying a program ZPP_COR6N in a client, is at PP module, this create a Handling unit, and after print a barcode label. There are many formats and the requeriment is add one format. I make the changes, in the control program named ZRPP_SDPACKDR and this call the sapscript ZFPP_PACK_ETIK, inside this form call a standard text ZPPWETIQUETA037 this I made in Tx. SO10. I've done the tests in others Tx Z and the result it's OK, but from the ZPP_COR6N not print my changes however the others formats print OK, my format print but some empty fields . I did check the Tx. NACU and the configuration is OK, and i make the debugger and I put many break points in the control program and activate debugger form and not stop the program, therefore i think not pass to this sapscript and program control. The program ZPP_COR6N call many bapis to create HU and not can call other sapscript Z because not exist others form. My question Is there any way call the sapscript without use OPEN_FORM or print one sapscript form any function? Also this client use many other many systems to comunicate with SAP , I think to print the barcode label from the other system but i not expert in RFC or SAP PI Is there possible and this is true how can show to my users and solve this problem? Add the NACU configurations
Hi jimblr,
Sorry you are having trouble. Does your printer show up "Connected and Ready" in ePrintcenter?
These steps may help. Turn off the printer. Unplug your router from the power source for 15 seconds. Plug the router back in. Wait until the internet comes back up. (Approximately 2 minutes) Then turn the printer back on wait a bit for your pending apps to print. Let me know if this helps.
Although I am an HP employee, I am speaking for myself and not for HP
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accept as Solution"
Similar Messages
-
B210a will not print after changing router\modem
b210a will not print after changing router\modem. Says it is connected to network, but will not print and says unavailable
Good morning,
Please use the second section of the following article to fix:
http://www8.hp.com/au/en/campaigns/wireless-printing-center/reconfiguring-system-help3.html?jumpid=r...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Not printing after changing cartridges
Purchased this printer a year and half ago but just took it out of box to use it about 3 months ago And it's been nothing but trouble since. It won't print anything properly. I have aligned print heads and cleaned the print heads numerous times to no avail. Changed the cartridges also doesn't work. A message keeps popping up on the touch screen but doesn't stay long enough to read it. Something about print heads. Can anyone help please.
The post here has links to a troubleshooting document for the Photosmart 6520. If the steps there do not resolve the issue please contact HP Support, even if the printer is no longer under warranty. If the above does not give satisfactory results then please post back here after calling HP.
-
5610 All in One Not printing after changing both cartridges
I just changed both the color and the black cartridges on my Officejet 5610 Aii-in-one and now it won't print anything. I did the cartridge alighment and it completed it successfully as far as I can tell.
Hello @Matthew2913,
Welcome to the HP Support Forums!
I would like to assist you today with resolving the print quality issue that you're experiencing since installing new cartridges in your HP Officejet 5610 All-in-One Printer. Thank you for including in your post that the alignment went through successfully.
At this point I would like you to run through some print quality troubleshooting steps. Can I please have you start troubleshooting by clicking here. Once the support document opens please run through step 1, step 2, step 3, and step 4. This includes any sub-steps under each of the steps listed. Please pay close attention to the 'Missing Colours' section under step 4.
Please respond to this post with the result of your troubleshooting. Best of luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping! -
Cyan not printing on HP Officejet Pro 8500 Wireless -
MyCyan is not printing after changing empty cartridge. I'm now on level 3 of tools - cleaning print head and the printer is just beeen setting doing nothing for 20 minutes. Any suggestions?
GGY-Cincinnati
This question was solved.
View Solution.Thanks for letting us know, glad it's now sorted.
Will close off the post
Thanks, Ciara
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP -
Hi,
We have a printronix printer model Printronix T5304 with the device type added LB_PRI. The requirement is Barcode printing and i have added the 2 Barcodes ZUCC_LA
ZUCC_SP to this device type but still the Barcodes are not printing. Can you suggesst me is there any other device type that i can use to test. I would request you to check the belwo output status also.
Output status: The status of the output request is showing complete and the spool list showing the barcodes but when physically printing barcodes are not printing only numbers are printing. I checked the entry has been correctly updated in print controle area. But not sure how to change the character format to match in the sapscript.
Regards
DellibabuHi Deli
Hope you are using the new bar code technology while creating the barcode in SE73. This could be the possible reason for the barcode not getting printed.
http://help.sap.com/saphelp_nw04/helpdata/en/66/1b45c136639542a83663072a74a21c/content.htm
Hope this helps.
Regards
Neeraj -
Custom barcode not displayed after changing width
Hi All,
I have a requirement to increase the size of the barcode from 9cm to 10cm in a SAPscript form. Previously we were using the standard barcode BC_128B. Using SE73, you can see the the configuration of standard barcode BC_C128B.
Bar code Width Unit
BC_C128B 9,00 CM
ZBC12810 10,00 CM
ZBC12810 is the custom barcode that I created which slightly differ from the standard object (different width and description). I also created a custom device types that is used by the barcode and then included the custom barcode in each one of the custom device types.
The above steps I did to create the custom bar code and device types can be found here: [Traditional Barcode printing for Smart Forms and Sapscript|http://help.sap.com/saphelp_nw04/helpdata/en/68/4a0d5b74110d44b1b88d9b6aa1315b/content.htm]
I then changed the barcode defined in the sapscript. The result was the barcode is not displayed anymore and only the barcode text is being displayed.
Your inputs are greatly appreciated.Hi,
Kindly go through these links below:
How to create a new BARCODE PREFIX (for SAPScripts)
Re: SAPScript with Bar Code
Hope it helps
Regrds
Mansi -
SAPScript graphic not printing
Hi Folks
I have a problem in a 3.1i system (yes that's right 3.1i - ah those were the days...I remember when..etc).
I have changed a SAPScript layout (just the contents of a text element in the main window) and this works fine. However something is now causing the logo in the header window to not print at all (neither print preview nor hard copy). The standard text is there but I can not get this to print out from SO10 either.
I don't think I have changed anything that could have caused this and it may be coincidence, but does anyone have an idea of what could be causing it?
During testing of this problem, I have created a new layout and included the same logo and other graphics all with no result. I have checked that all graphic are created from Tif files (version 6 no compression).
Now I have run out of ideas...
Thanks in advance.
NickFixed it by uploading the image again. Don't know why it didn't work before but it does now.
-
SapScript Data is not printing in Address window
Hi all,
I am having a problem regarding printing some values in a window of sapscript.It prints data in that window for some input and not for others input. The structure , which is being passed to this window is having values in print program all the cases. I get into the sapscript in debugging mode and found that the structure is having values fr all the test run ..But its still not printing in some cases.The window is coming as blank.
the code in the editor of the window is :
POSITION WINDOW
BOX FRAME 10 TW
AS <B>&ztfin-fld18'/'&&t_ztfin-fld18&</>
ADDRESS PARAGRAPH AD
ADDRESSNUMBER &DKADR-ADRNR&
TITLE &DKADR-ANRED&
NAME &DKADR-NAME1&, &DKADR-NAME2&, &DKADR-NAME3&, &DKADR-NAME4&
STREET &DKADR-STRAS&
POBOX &DKADR-PFACH& CODE &DKADR-PSTL2&
CITY &DKADR-ORT01&, &DKADR-ORT02&
POSTCODE &DKADR-PSTLZ&
COUNTRY &DKADR-LAND1&
REGION &DKADR-REGIO&
FROMCOUNTRY &W_CLERK_LAND&
ENDADDRESS
can sugest me something.
Reward poits guranteed.Hi Vijay..please have look in this..
Case: text is printed in address window
DKADR-ADRNR xxxx
DKADR-NAME1 xxxx
DKADR-STRAS xxx
DKADR-PFACH xxxx
DKADR-ORT01 xxx
DKADR-LAND1 xxx
DKADR-REGIO xxx
rest are blank
Case: text is not printed in address window
DKADR-ADRNR xxxx
DKADR-NAME1 xxxx
DKADR-NAME2 xxxx
DKADR-STRAS xxxx
DKADR-ORT01 xx
DKADR-LAND1 xx
rest are blank
is the Addresss CALL IS failing because of DKADR-REGIO = space ? -
Hi all,
In SAPScript I can see an image in the print preview, but when i print it is not printing from spool, other text parts are printing.
Please help me in solving this.
ThanksHi,
It should print from spool. Please check the spool whether the image is there or not.
Regards,
Teddy Kurniawan -
I changed the black ink cartridge - does not print
I changed the black ink cartridge to a refilled one, but as it did't work , changed it to a genuine one. Now the printer does not print, though it seems to be working, all I get is plank pages. I unplugged the printer, but it didn't help. what can I do?
The genuine cartridge is new and has ink. I changed an other cartridge too (blue) , but this one to a genuine one, and it is working if I copy/print coloured pictures.Hi there, which printer model do you have?
*** If my reply was helpful, please click on the "Kudos Thumbs-Up" on the right, as a way to say "Thanks!".
If this reply also fixed your issue - please click the "Accept as Solution" button, so that others can find the same answer. *** -
Purchase Order Changes not printing in Smartform
Hi friends,
first time whenever i create PO smartform printing after if i change quantity and save smartform is not prinitng with the lastest changes?
please help methanks for your reply
first time when i create PO smartform is printted and also i ma bale to see in messages tab with green color entry..
after PO changing in ME22n there is no scond entry in messages tab and not printted.
i have maintained condition record, and i am able to create printout when i create a new PO.
but chnages its not happening please help. -
Printing Paper Changes not Taking Effect
Hi,
I recently upgraded to Windows 7 from XP and I also have Acrobat 9 Pro installed.
When I use a different size page, in this case 11x18, and go to print it will start out as our printer default 8 1/2x11 which is should be. I would then proceed to go to the printer preferences and change the paper size and click "ok" to get back to the main print page where I would notice that the print preview would not update ot the new size. If I proceed to print with it showing the 8 1/2x11, even though it is set to 11x18, it would scale it to the 8 1/2 x11. What I have found to work around it is if I click and then unclick the button "Choose Paper Source by PDF Page Size" it would scale the paper to the correct size. I use different size paper and do not want to change the default size.
This is sort of a hassle and I sometimes notice that when I'm going from 11x17 to 23x20 it would not even update and would not allow me to print on the correct paper size.
I am using a sharp AR-M207 printer. I have tried to use the PCL/PS/PPD drivers for the latest version and they all have the same effect. Additionally Acrobat 9 Pro is also up to date.
Is there an update or a patch somewhere or another reason why this is occuring. I am not included to switch printer mainly because I do need a large format printer and its difficult to find one.
Thanks,Daniel,
Yes I am currently using the most recent version of Acrobat and Printer Drivers.
I have not tried the Help > Repair option. I actually noticed that this issue occurs on my laptop as well, same operating system (Windows 7). It is possibly an issue because of compatability with Windows 7 although there might be a workaround for it.
I have tried a different printer, ie my laptop, and the same problem occured.
I can look for outdated Sharp print drivers but that might be difficult to find.
Also I currently use Windows 7 64bit. -
Barcode not printing on Zebra printer
Hi All,
We are facing an issue while printing the barcode from ECC 5.0 using a smartform.
The problem is that the z program creates a spool when we click the print option but does not print the barcode in the zebra printer.Also when we try to print from spool directly it doesn't print anything.
We are on Ecc 5.0
zebra printer is Z4mplus.
Any help is appreciated and will be rewarded with points.
Thanks
UmangHi,
Please check with your Printer Vendor, whether it supports the Barcode font which you have used.
Also check for SAP notes. There are several sap notes on Zebra printer.
Goto www.service.sap.com
Best regards,
Prashant -
In the last week when changing test notes in Outlook appointments or all day events, the changes appear on my PC, Iphone & Ipad, but when I print my calendar they do not print. I get the old text or deleted text from the printer copy of my calendar. What is going on?
Thanks Sig. The information is here: Anything useful stand out?
Battery Information:
Model Information:
Serial Number: 9G1130CJVD3MA
Manufacturer: DP
Device Name: bq20z451
Pack Lot Code: 0000
PCB Lot Code: 0000
Firmware Version: 0201
Hardware Revision: 0002
Cell Revision: 0158
Charge Information:
Charge Remaining (mAh): 5663
Fully Charged: Yes
Charging: No
Full Charge Capacity (mAh): 5663
Health Information:
Cycle Count: 59
Condition: Normal
Battery Installed: Yes
Amperage (mA): 261
Voltage (mV): 12574
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 10
Wake on AC Change: No
Wake on Clamshell Open: Yes
Wake on LAN: Yes
Current Power Source: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 2
Wake on AC Change: No
Wake on Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
ID: 0x0100
Wattage (W): 60
Revision: 0x0000
Family: 0x00ba
Serial Number: 0x00262704
Charging: No
Maybe you are looking for
-
ActiveSync Input Form -- To take AD Resource name from Database column
Hi All, My authorative source is a database table called dbTable. I am using an input form to provision into Active Directory. The Active Directory resource name is stored in a dbTable column. I first tried to hardcode the name of AD and do the provi
-
My Firefox keeps freezing when i watch videos, telling me "firefox has stopped working"
It also says something about firefox pluggins not working. It doesn't crash, just 'stops working' and I have to close it with the task manager. It has only happened when I am watching a video so far. 10 minutes after posting this it 'stopped working'
-
IPod completely blanks out!!
My iPod Nano that I got in 2007 has been working completely fine until today, when I went to turn it on and nothing happened. I plugged it into the computer, which wouldnt regonize it at first, then after about 10 minutes told me that my iPod had bee
-
How can I notify other TFS users with my latest changes done to defect or workitem?
Is there a TFS feature that would allow me to quickly notify my team about latest changes I made to the defect/workitem? I see the email button, but it is populated with just link to the TFS and bug description. I would like it to include my latest m
-
Cannot Connect using Enterprise Manager
The details of the Oracle 9i Server 9.2.0.1.0 are as follows: IP: 172.25.22.78 SID: MSPD Port 1521 I am trying to connect to this server using enterprise manager but i get the "ORA-12543: TNS:destination host unreachable" Error. However I am able to