Not printing full 6x4 when set to print 6x4 leaving at least 1/2" blank at the end answers please

not printing full  6x4 when set to 6x4 leaving at least 1/2" at the ends un printed this is bad any answers to solve this problem please have tried looking on hp  but cannot find a answeer to the problem.

Hi there,
Could you provide the community with a little more information to help narrow troubleshooting? Things like your printer model and your operating system help out a lot.
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Similar Messages

  • After years of no problems I can't print photos. When I select print I get the message "There are no themes located. Until at least one theme has been installed this feature will be unavailable.  What are themes? How do I install them?

    After years of no problems I sddenly can't print photos. When I select print I get the message "There are no themes located. Until at least one theme has been installed this feature will be unavailable.  What are themes? How do I install them? Why has this problem suddenly arisen?

    Re-installing does not affect your Library in any way. You don't delete it, only the app.
    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2a: On 10.5:  Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
    2b: On 10.6: Those receipts may be found as follows:  In the Finder use the Go menu and select Go To Folder. In the resulting window type
    /var/db/receipts/
    2c: on 10.7 they're at
    /private/var/db/receipts
    A Finder Window will open at that location and you can remove the iPhoto pkg files.
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.
    Regards
    TD

  • I have a bible app on my iphone that is full of notes I have taken, when I sync it to my macbook pro , then to my ipad the notes I have added do not transfer

    I have a bible app on my iphone that is full of notes I have taken, when I sync it to my macbook pro , then to my ipad the notes I have added do not transfer

    You probably want to open a ticket with the maker of the app.

  • When I'm using Safari, acasionally the menu bar just disappears. I'm running the latest version of Lion and the latest version of Safari. This is not a full screen app problem. I have multiple windows open. This happens all the time! Firefox is fine! ???

    When I'm using Safari, ocasionally the menu bar just disappears. I'm running the latest version of Lion and the latest version of Safari. This is not a full screen app problem. I have multiple windows open. This happens all the time! Firefox is fine! What the ****? Please help!

    Right, like I'm trying to say, THERE IS NO SAFARI MENU bar. Example: I have multiple applications open, I click on a Photoshop window, the correct menu or title bar or whatever changes. Every other application window I click on brings up the correct "whatever" bar. If I click on the desktop, the "Finder Bar" shows up.
    Everythiing else, BUT SAFARI, works the same way since OS X came out.  This is ridiculous.
    I'm getting the vibe that Apple is trying to get rid of the finder.... this is the way wrong direction.

  • A pop-up message is frozen on my settings page. I was trying to set up an apple id for iTunes when I got a message "required fields have been left blank. The missing information is highlighted in red." the ok button doesn't work. 1st gen iPad.

    A pop-up message is frozen on my settings page. I was trying to set up an apple id for iTunes when I got a message "required fields have been left blank. The missing information is highlighted in red." the ok button doesn't work. The message is now fixed & I cannot get rid of it. Ironically, when I found this forum I was able to set up an apple Id. Please advise how to get rid of the pop-up box. Thanks!

    I'm having this same problem as well and cannot advance--very irritating. All of the information is filled out correctly and I've editted my AppleID information online separately as well to get around this issue, but no luck...

  • HT1414 I "Erased all content and settings" and now my itunes does not recognize my iphoe when i plug it in. Plus my iphone is stuck with the apple symbol on it and wont do anything. what did i do?

    I "Erased all content and settings" and now my iTunes does not recognize my iPhone when I plug it in. Plus my iPhone is stuck with the apple symbol on it and wont do anything. what did I do? How do I get my phone to work again?    

    Reset, hold both Home and Power buttons until the iPhone begins to restart. Usually takes about 10 seconds time. If still problem. Open iTunes on computer. Connect iPhone to computer with USB Cable. Hold both Home and Power buttons until iTunes recognizes iPhone in Recovery Mode. Usually takes about 20 seconds of holding both buttons. Restore the Firmware.

  • My IPhone has been charged for at least 3 hours still showing the low battery icon and not turning on, normally when my phone is in low battery it will automatically pop up the apple icon but now it's not turning on :( someone pleaseeeee help me!

    My IPhone has been charged for at least 3 hours still showing the low battery icon and not turning on, normally when my phone is in low battery it will automatically pop up the apple icon but now it's not turning on someone pleaseeeee help me! Thanks!

    Hi Windy08,
    If you are having an issue with charging your iPhone, you may want to start your troubleshooting with the steps in this article -
    If you can’t charge your iPhone, iPad, or iPod touch - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • I have OS Maverick; my FaceTime account is activated; when I call someone on FT, I hear it ring and if the person answers we can have a good conversation; all my settings seem to be fine, however, my FT just won't ring or register any miss call.  answer

    I have OS Maverick; my FaceTime account is activated; when I call someone on FT, I hear it ring and if the person answers we can have a good conversation; all my settings seem to be fine, however, my FT just won't ring or register any miss call.
    I HAVE MAVERICK BUT NOT CERTAIN WHICH VERSION.

    Thanks John UK. I checked the firewall but it set to allow all incoming calls. So, I am still at square one. Any further suggestions?

  • Do you have any ideas why Motion 5 would run slow on a computer? I have an Imac with 8Gigs of ram, and plenty of hard drive space, but it still gives me the beach ball when I add a few lights and effects. I'm at the end of my rope.

    Do you have any ideas why Motion 5 would run slow on a computer? I have an Imac with 8Gigs of ram, and plenty of hard drive space, but it still gives me the beach ball when I add a few lights and effects. I'm at the end of my rope.

    You probably don't really need 1080 at 60 for your finished projects but since you're just starting out with Motion, you need to lower your expectations. A long way. 1080 is about 2 million pixels per frame, DV is only about 400,000. That's not just five times as many pixels for the Mac to track; everything in video is exponential.
    Explore the training tutorials available by Mark Spencer. You will get an idea of how his super powerful machine reacts with the software.
    Adding a light roughly doubles the processing time over flat scenes. Two lights increases processing again. Reflections require processing the lights and then calculating the reflections so add another quarter of the time required for flat scenes. Add camera movement, motion blur, and depth of field and you need exponentially more processing time for every frame. The preload of renders into RAM is one of the cooler features of Motion, as comapred to After Effects, but that takes tons of time, to.
    Try working in ye olde DV resolution for a few days. Get to know the software's limitations and what gets imposed by your Macintosh. Step up to 720p/30 and see how things slow down.

  • Greetings. How do I silence the sounds made when a person enters or leaves a conference via phone. Especially the loud "thud" made when leaving, it's very distracting.

    Greetings. How do I silence the sounds made when a person enters or leaves a conference via phone. Especially the loud "thud" made when leaving, it's very distracting.

    You should be able to turn off the door bell (or similary named feature) with your phone bridge. This is a function of the phone bridge, not Adobe Connect. There is probably a star command to turn the feature off. If we knew what phone provider you used, then a link could be provided to their commands.
    As to the loud thud, I'm not sure what you mean by that. Maybe ask your attendees to hang up gently?

  • HT4759 When I try to return to my last backup, it tells me the IOS7 required, please help.

    When I try to return to my last backup, it tells me the IOS7 required, please help.

    Did you install the beta version of iOS 7 on your phone? If so, and you are a developer, you must post in the developer forums. If you are not a developer, you are stuck and will not be able to get assistance on these forums.

  • New iPad 5 pixels getting stuck (Rewind, Play, Fast Forward) when using apple tv. Leave ghost buttons on screen. Do I return? Please advise.

    New iPad 5 pixels getting stuck (Rewind, Play, Fast Forward) when using apple tv. Leave ghost buttons on screen. Do I return? Please advise.

    edit: iPad 4

  • Time Machine will not do a full backup when set up

    I am trying to set up time machine for the first time on a external HDD, but it just won't do a full backup in the first time I set it up, I knew I had a problem when I entered the time machine and it would only show today and now, I had the time machine set up for about a week. I already checked the time machine options and it says full backup should be 178 GB, but when I set it up it does not do the full backup just a partial, the time machine disk is always empty, I see no errors in the time machine preferences and also formatted the external HDD the HDD Mac OS Extended, Mac OS Extended (Journaled), Mac OS Extended (Case Sensitive), Mac OS Extended (Case Sensitive Journaled) and even tried a different HDD and I always get the time thing, no full backup when I set it up, also fixed permissions on all my disks and no luck... can anyone help???

    this is the message I got;
    Starting standard backup
    Couldn't find en0.
    Unable to determine UUID for host. Error: 35 Resource temporarily unavailable
    * Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '* -[NSCFArray initWithObjects:count:]: attempt to insert nil object at objects[0]'\n* Call stack at first throw:\n(\n 0 CoreFoundation 0x00007fff833c05a4 __exceptionPreprocess + 180\n 1 libobjc.A.dylib 0x00007fff887d2313 objcexceptionthrow + 45\n 2 CoreFoundation 0x00007fff8336b317 -[__NSPlaceholderArray initWithObjects:count:] + 407\n 3 CoreFoundation 0x00007fff8337fc68 +[NSArray arrayWithObjects:count:] + 56\n 4 CoreFoundation 0x00007fff8338adb1 -[NSArray arrayByAddingObject:] + 193\n 5 backupd 0x000000010000989b 0x0 + 4295006363\n 6 backupd 0x000000010000a510 0x0 + 4295009552\n 7 backupd 0x0000000100006d00 0x0 + 4294995200\n 8 Foundation 0x00007fff80f04f65 _NSThread__main_ + 1429\n 9 libSystem.B.dylib 0x00007fff80876f66 pthreadstart + 331\n 10 libSystem.B.dylib 0x00007fff80876e19 thread_start + 13\n)
    terminate called after throwing an instance of 'NSException'
    2009-11-08 22:50:42.463 ReportCrash[235:2503] Saved crash report for backupd[146] version ??? (???) to /Library/Logs/DiagnosticReports/backupd2009-11-08-225042localhost.crash

  • Unable to print full page to 1 specific printer while other computers can.

    I have 1 computer (Windows 7, 64 bit) which is unable to print full page to a Xerox Phaser 7760GX.  I have other computers (Windows 7 64 bit and Mac OSX Mavericks) which are able to print perfectly fine to the same printer.  This only happens in Adobe Acrobat XI Pro, not in other software I have tested.  The same PDF's also print to other printers without problem.
    So far I have:
    Re-installed drivers (including the Xerox Generic Drivers)
    Set it to print as image (which makes it full screen, but also greyscale)
    What happens when I try to print normally, is assume the page is portrait.  It will print it landscape, on the right side of the page (so it takes up half the page).  It will also send out a blank page after it.  Has anyon else experienced this and come up with a different solution?

    Glad you solved your problem. On Aperture 3.02 I find no expansion slider. Where is it in 3.01?

  • Problem with Printer Utility Setup when installing Epson printer

    Hi everyone,
    Hope some kind soul here can help me out on this.
    I bought a Epson Stylus CX7300 All-in-one printer yesterday and am having difficulty installing the printer driver onto my eMac running on OSX 10.3.9.
    I followed the procedure on the Epson installation disc and even called up their customer support office and went through step-by-step guides to troublesome the cause. Even downloaded the latest driver from the Epson site, and installed it, but every time I open up a document and tries to print, the following would occur:
    1. When I click "PRINT", a pop-up will appear, and under the printer field, it will be indicated as "NO PRINTER SELECTED"
    2. I would then select "EDIT PRINTER LIST" from the printer field - after which another pop-up will appear saying "You have no printers available. Would you like to add your list of printers now?"
    3. When I click "ADD", an error pop-up will appear saying "The application Printer Setup Utility has unexpectedly quit. The system and other applications have not been affected. Would you like to submit a bug report to Apple?"
    I have submitted tonnes of "bug reports" to Apple since yesterday but nothing happened.
    I also tried to open Printer Utility Setup directly from under System/Applications/Utilities, but the same error will appear and it will just quit "unexpectedly".
    Is there any remedy to this?
    Oh, the strange thing is, the CX7300 can scan images fine, and I also managed to do a test print from Epson's utility.
    Thank you.
    Yours Sincerely,
    Alvinology

    Hi, I was just about to post the same question myself. I'm trying to sort out a friends iMac G5 with a Canon Pixma(?) printer. In this case the printer used to work OK, but after moving house and setting it up again, Print Utility crashes every time when trying to add the printer.
    Thanks
    Paul Nilsson

Maybe you are looking for