Not printing in quicken

officejet j4860aio is not printing in Quicken.  It was until about 3days ago, but unsure what changed to make it stop.  I have run all the diagnostic stuff that HP recommends.  any suggestions?

Hi
I think ECESS is an currency/quantity field right?? Correct Me If I wrong.
Try to declare the reference field for this field in the smartform. What I mean is for currency and quantity fields in smartform, reference fields needs to be given.
In the Global Definitions-->Select the Tab "Curr/Quant Fields". Here give the internal table and field name ecess, in the reference Field give the standard table name/field name. And give the data type which is applicable there.
Vishwa.

Similar Messages

  • I can not print from QUICKEN . I have tried selecting the HP 960c series as per your directions,

    I need help.  I can not print from QUICKEN to my HP Officejet J6480 printer.  Nothing happens.   It was working in the recent past.  NOw that I need to print out the remainder of my record for income tax prep, it won't print. I can not thinnk of a single thing that I have doen differently.  I followed the directions to have a second printer   HP 990c  to "fool" the program into using it but it still does nothing.   I have downloaded drivers etc, unplugged and replugged etc.  "QUICKEN"  is useless and says that HP is working on  it.   Can someone help me please

    Hi there morinallen,
    Try downloading and running the print and scan doctor located here to ensure there are no software conflicts:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
    It can fix a lot on its own and if not give a better idea of what is going on.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • HP Officejet Pro 8500 will not print documents/reports for Quicken 2008

    New computer will not print in Quicken 2008 Software Program.  Attempted all possible solutions. I have Windows 7 installed.  I downloaded and installed the new software  for HP Office Pro 8500 to work with the Windows 7.  The Quicken 2008 Software Program stopped printing as a result.  All other software programs prints perfectly. Help!  I get no support from Quicken Help. 
    Message Edited by Tiger-Pope on 10-28-2009 03:38 PM
    This question was solved.
    View Solution.

    Tiger-Pope wrote:
    New computer will not print in Quicken 2008 Software Program.  Attempted all possible solutions. I have Windows 7 installed.  I downloaded and installed the new software  for HP Office Pro 8500 to work with the Windows 7.  The Quicken 2008 Software Program stopped printing as a result.  All other software programs prints perfectly. Help!  I get no support from Quicken Help. 
    Do you have the 64 bit version of WIn 7?  This thread suggests printing from the 64 bit Vista (and WIn 7 would be similar) is an issue in Quicken 2008 and 2009.  The thread suggests there is a solution but the link requires registering for the Quicken forum and that did not work for me this afternoon.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • HP 3650 deskjet will not print in Windows 7

    New pc w/ Windows 7. My HP deskjet 3650 will not print PDF, Quicken, Website selections, etc.
    HELP!

    Did you install the driver as described here?  Will the printer print a Windows test page or a file from Notepad?  Do print jobs remain in the print queue?  Are there any error messages?
    Running the diagnostics at http://www/hp.com/go/tools may help resolve the issue.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • HP Photosmart Premium C 309g printer can not print checks

    My Photosmart Premium C309g printer will not print my Quicken (3 checks to a page) checks.  I have tried all settings possible to no avail.  The printer starts the paper into it, but then stops and says "Out of Paper".  Then my only recourse is to press the "X" which then ejects the paper.  Interestingly, if I put in plain white paper there is no problem with printing the checks.  Unfortunately, I need to print on my Quicken checks sheets.  Given the information noted, I believe there is a sensor of some type that is blocking the correct check paper (it has banking information #s, etc.) from working.  If there is a solution please help.  Thank you

    I have this exact same problem with the same printer.  Printer will not print black. My macbook pro is connecting to the printer but shoots out a blank page.  I just put in a new ink cartridge even though it was not low on ink.  Please help.

  • Printing from Quicken 2010

    My HP Officejet 6500 wireless printed reports without problems for Quicken 2009, but will not print for Quicken 2010.  When I send a report to it, it beeps as if it is done, but nothing prints.  Any help?

    I had the exact same problem.  Can print reports but not checks.  Made the change you suggested and it worked.  So what exactly is the problem and who needs to fix it?

  • My /Quicken 2008 will not print

    I recently got a new HP PC.  It has Windows 7 on it.  I have Quicken 2008 that will not print on my HP Photosmart 7350 series printer.  It will print other stuff but not the Quicken data.  What can I do different?

    Try installing a generic driver for printing from Quicken only.
    ===Step one: Determine which port the current HP product uses===
    a. From the Windows taskbar, click the Windows icon/Start button.
    b. In the Start Search box, type control printers and then press Enter . The Printers window appears.
    c. Locate the HP product in the list of printers, right-click the HP product, and then click Properties .
    d. Click the Ports tab and write down the name of the port that has a check mark in the box beside it. This is the port to which the current HP product is printing.
    e. Click Cancel to close the Properties dialog box.
    ===Step two: Add an HP Deskjet 990c default printer===
    a. In the Printers window, click Add a printer .
    b. Under Choose a local or network printer , click Add a local printer and then click Next .
    c. Click Use an existing port , click the down-arrow ( ) to the right to select the port identified in Step one, and then click Next .
    d. Under Manufacturer , locate and click HP .
    e. Under Printers , locate and click hp deskjet 990c and then click Next .
    f. In the Printer Name box, change the name of the printer if you'd like to.
    g. Continue the wizard and select the preferred options, and then click Finish .
    Try printing to this new printer icon you created and see if it helps.
    Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"
    I am an ex-HP Employee.

  • HP C5280 unable to print my Quicken

    I have an HP C5280 Photosmart All In One inkjet printer which I'm able to print copies of emails on, web pages, MS Works documents and envelopes but I have Quicken Basic 2007 and I cannot print any reports in my Quicken.   My computer's OS is Windows Home XP w/SP2 and I have the C5280 set as my default printer.   Before installing the C5280 to my Dell desktop PC I had an HP 2575 which printed my Quicken with no problems.   What could be the problem as to why my C5280 will not print any of my Quicken?

    Hello, 
    Please try the below steps...
    Click START > Device and Printer > Add a Printer > Add a local printer >
    ( if the printer is connected with USB )
    Select "Use Existing Port " then Virtual USB from drop down  , Click NEXT, in the Manufacturing list , select HP / Hewlett packard, and from the right pane , select Deskjet 6980 and complete the wizard
    OR
    ( if printer is on Network, ) 
    Click START > Device and Printer > Add a Printer > Add a local printer > Select "Create a New Port" > type in the Printer's IP address Click NEXT, in the Manufacturing list , select HP / Hewlett packard, and from the right pane , select Deskjet 6980 and complete the wizard
    Now try printing it should work. 
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • Printing from Quicken

    My HP Officejet 6210 All-In-One will print from all programs except Quicken.  I have Windows 7.  My test page tells me it is correctly installed but it will not print anything from Quicken

    Quicken 2002 H&B is not supported by Windows 7.
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • I now have Win 8, and can't print my quicken. Does this have to do with 64 bit and 32 bit foxfire?

    Ever since I went to Windows 8, my quicken program will not print correctly. Does this have anything to do with Foxfire 32bit and win. 64 bit?

    Hi! Thx for your quick reply! I am still unsure what to do tho---see my questions below in bold:
    Windows 7 comes with its own version of the standard PostScript driver. = Where is this driver? I have no idea how to find it, it doesn't show up in my Printer menu in FM?
    Given that PostScript generated by a driver can be highly device-specific, you need to install the driver as modified by the PPD file for the device in question. Most printer manufacturers in fact provide a PostScript driver installer that associates their printer's PPD file with the standard Windows Printer driver and subsequently creates what is called a PostScript printer driver instance for the particular device on the I/O port you designate. = ??? I've only updated a PPD file for watermarks and have no idea what this means...is there a step-by-step instruction for this? I just need to download a PS driver to select that works & doesn't freeze up my FM when creating a .ps file.
    The real question thus is exactly what are you trying to generate PostScript for? = I create a PS, & then use Distiller to create a PDF. This enables me to have a PDF that automatically has Bookmarks, the TOC/LOF/LOT & all corss-refs are hyperlinked, etc.
    If you are trying to create PostScript for distillation into PDF, Acrobat installs a PostScript driver instance of its own, labelled Adobe PDF, that is associated with the Acrobat Distiller PPD. = I have tried the Adobe PDF selection from my Printer menu in FM, but it freezes up FM and I have to close the whole program & no PDF generates.
    BTW, although you may be successful in installing and running FrameMaker 8 on Windows 7, in fact Adobe officially does not support FrameMaker 8 on Windows 7. = I don't know what to say---the upgrade is too expensive for some of us folks out here right now, so we all need to work with what we have for now!
    I appreciate your help, thank you.

  • HP photosmart 6520 e Bought new Will not print my voucher checks. Details below

    8 1/2 X 11 voucher checks    To eliminate size, texture, thickness, any other paper reasons ,  I turned the check upside down.  it printed exzctly on the back of the check what it should print on the face of the check.   With the check face up, the printer drops down below the check and prints on the voucher what it should print on the check.   If I feed a plain sheet of paper instead of the check, it will print correctly what it should print on the check............But it will NOT print on the check!!
    My impressioon is that the printer scans the check, thinks the check is a letter head,  and faithfully refranes from over-printing on the letterhead.  Could this printer be that smart??         If so, where do I look inside to turn that feature off.
    I'm using windows 7 with quicken (2007 issue) but the fact that the printer wii print correctly on  anything you stick in there EXCEPT THE CHECK, pretty much eliminates everything cxcept the printer being headstrong.

    Well I'm sorry that didn't, since your already using the latest drivers I recommend trying to install an alternate print driver and see if that helps any.
    To try another print driver
    -click on the Start icon
    -choose "devices and printers"
    -choose "add a printer"
    -select "add a local printer" (make sure you choose the existing port that your current printer is on)
    at the install the printer driver section choose "HP" as the manufacturer and under printers look for the "HP Deskjet 990c"
    If your unable to locate the 990c driver click on the "windows update" button and then follow the above steps to choose the 990c print driver.
    -click next once you have the driver selected
    -if it asks I always select "do not share this printer" and I don't set it as default
    just finish off the installation.
    Once the new driver is installed you should see the 990c printer and be able to print to it.  Try selecting it in your Quicken program to print the check. 
    Sorry for the frustration, I hope this helps.
    I am an HP employee, my contributions are my own and do not necessarily reflect the views and strategy of HP.
    When a solution is found please mark the post that solves your issue.
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!

  • Color LaserJet Pro MFP M176n installed but not printing

    Hello Everyone,
    I have problem with my printer Color LaserJet Pro MFP M176n.
    at thebegining i try to install it buteverytime i run the installer it give me HP Installer error, so i installed the Microsoft Net Framework 3.5 and run the install and it was working perfict, i install the driver on USB cable and after it show me successfull and print test page and finish, so i click print test page and in printer and fax the printer M176n Show 1 printing job and then 0 but no print came out i try again same, i remove the cable and plug it again the printer is responding perfictly but still not printing i check the scanner and its working fine but only the printing is not, so i try to install it through network and it was sccessfully installed with IP but when i print, still the same 1 printing Job but nothing came out of the printer when it came 0 printing job.
    Please help......
    - Windows is windows XP 32bit
    - Printer name   Color LaserJet Pro MFP M176n PCLms
    Thanks
    I did try to use Scan Doctor, the printer didnt print at the first check but when it ask forenternal print test page it printed then it ask me toif it print of not and i click yes it print in enternal print so it ask me to remove and reinstall so i did 2 to 3 times and still same will  not print but when run Scan doctor it will print on enternal print .....
    Wael Hilal

    Hello @ Averus89, 
    Welcome to the HP forum. 
    I understand you have done quite a lot to resolve your M176n and its connection to the ePrint service. 
    I would like to help you with this issue. 
    If the printer is not printing the web services info sheet, or allowing you to add it to HP Connected, I
    would set a manual DNS. 
    I wont go into great detail about setting this up. From your post, I feel you know your way around the printer and your network. If I am mistaken, let me know. I will go into detail. 
    The DNS to try is:
    Primary: 209.244.0.3
    Secondary: 209.244.0.4
    Set the DNS then try printing the web services info page again. 
    Let me know if this helps. 
    Aardvark1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

  • HP Laserjet 4100 on network will not print

    Since I’ve installed Snow Leopard, I have not been able to print with my HP Laserjet 4100.
    My set-up: new 24” iMac, many hard drives and more. Two devices: HP Color Laserjet 5550 and HP Officejet J5750 are connected to the iMac through a USB Hub. Although initially scanning did not work with the J5750, I was able to make that work once additional drivers were downloaded from HP. Both work fine.
    I also have an older HP Laserjet 4100 which has been my steady workhorse for years. It only has Ethernet and serial port outlets. It is connected to an AT&T 2-Wired Ethernet Hub/DSL Modem (model 2701HG-B) that is connected to the iMac.
    I’ve contacted HP and Apple about this problem. None of the three people I worked with at Apple could help and the HP representative was unsure if they could help but that it would cost me $40 to find out. According to HP website, since Apple Talk no longer exists, we are required to input the IP for the device. For the 4100, the IP address is 10.0.1.100. I tried this two ways: in the “Add Printer” window under “IP,” inputted as the IPP, and inputted as the HP Jetdirect Socket (as per the HP instructions). When this is done, the printer shows up when you give a print command. However, it does not show up in the “Add Printer” window under “default” or anywhere else.
    Status: If I connect the 4100 Ethernet cable directly to the back of the iMac, the “Supply” level indicates the true level of toner in the 4100. However, it will not print. If I connect the 4100 Ethernet cable to the Ethernet hub, the supply level does not show nor can I print.
    Any suggestions?

    I am struggling with the same problem. I have two HP 4100dtn printers on ethernet. Each has a manually assigned IP address. I can set up the printer(s) just fine in the Print & Fax Preference and Snow Leopard finds the printer just fine when I enter the IP address and chooses the correct HP Driver.
    When I try to print, my print job appears in the queue as expected, than an error appears that something about a "bad command". Sorry, I'm home right now and don't have direct access to the printer so I can't give you the precise language of the message, but the gist of the message is that the system tried to connect to the printer to send the print data but the printer does not know how to respond to the command that was sent.
    It's as if the firmware in the 4100 just doesn't have something in it's lexicon that Snow Leopard needs. The HP web site is no help. One page I found says the printer is supported (http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&obje ctID=c01664444&jumpid=regR1002USEN ) and another page I found says that it is not supported (http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&obje ctID=c01879014&jumpid=regR1002USEN). The HP on line chat won't let me log in and hold a chat with HP unless I know the Serial Number of the printer, which I don't have here at home.
    More to follow tomorrow.
    Anyone have any ideas?

  • HP Laserjet 4100 will not print in Snow Leopard

    Since I’ve installed Snow Leopard, I have not been able to print with my HP Laserjet 4100.
    My set-up: new 24” iMac, many hard drives and more. Two devices: HP Color Laserjet 5550 and HP Officejet J5750 are connected to the iMac through a USB Hub. Although initially scanning did not work with the J5750, I was able to make that work once additional drivers were downloaded from HP. Both work fine.
    I also have an older HP Laserjet 4100 which has been my steady workhorse for years. It only has Ethernet and serial port outlets. It is connected to an AT&T 2-Wired Ethernet Hub/DSL Modem (model 2701HG-B) that is connected to the iMac.
    I’ve contacted HP and Apple about this problem. None of the three people I worked with at Apple could help and the HP representative was unsure if they could help but that it would cost me $40 to find out. According to HP website, since Apple Talk no longer exists, we are required to input the IP for the device. For the 4100, the IP address is 10.0.1.100. I tried this two ways: in the “Add Printer” window under “IP,” inputted as the IPP, and inputted as the HP Jetdirect Socket (as per the HP instructions). When this is done, the printer shows up when you give a print command. However, it does not show up in the “Add Printer” window under “default” or anywhere else.
    Status: If I connect the 4100 Ethernet cable directly to the back of the iMac, the “Supply” level indicates the true level of toner in the 4100. However, it will not print. If I connect the 4100 Ethernet cable to the Ethernet hub, the supply level does not show nor can I print.
    Any suggestions?
    Chuck Stewart
    < Edited by Host >

    Well, another week has gone by without a solution.
    Again, here is the problem:
    I have a 24" iMac connected to a USB hub and an AT&T 2-Wire DSL/ethernet hub. When I upgraded to Snow Leopard 10.6.1 and now the update 10.6.2, the two printers on the USB hub work fine but the HP Laserjet 4100dtn does not print. This old printer has only ethernet or serial ports. I've downloaded and installed the HP driver updates from Apple and HP to no avail. According to HP, I must add the 4100 manually using its IP. I've followed the instructions while adding a printer to select IP- HP Jetdirect - Socket. The address of the printer is 10.0.1.100. When I type this in, the window says that this is a valid and complete address. It searches and then says the "Print Using:" is a Generic PostScript Printer. The driver for this printer, I believe, should be "HP LaserJet 4100 Series v.3010.107" Regardless, when I click Add the window "Determining Installable Options" shows "Status: Connecting to printer..." It never establishes a connection.
    The 2-Wire DSL/Ethernet Hub/Modem, has an IP of 192.1687.1.66, Submask 255.255.255.0 and Router (DNS) 192.168.1.254.
    If I plug the ethernet cable directly from the printer to the iMac, the supply level shows correctly but will not print. If I plug the ethernet cable from the printer to the 2-Wire and then to the iMac, it neither shows supply level nor prints.
    Any suggestion as to how to fix this problem? (I've been on the phone with 3 different Apple respresentatives and 1 HP representative with no success.)

  • Officejet Pro 8600 - Macbook Pro and Macbook Air will not print

    Products:
    HP Officejet Pro 8600
    Macbook Pro (Mac OS X, Version 10.7.5)
    Macbook Air (OS X, Version 10.8.2)
    Question:
    Why did my Macs initially print fine, but now will not print at all?
    Full Story:
    I have a wireless network at my house that consisted of a 30mb cable internet, Netgear 900n, HP Officejet Pro 8600, 2 Dell Laptops with Windows 7, a Lenovo Laptop with Windows 7, and Dell Tower with Windows 7 - All printed just fine.
    The HP Officejet 8600 was added to my network about 2 months ago.  
    I added a Macbook Pro and a Macbook Air about 3 weeks ago.  Both Macs printed just fine for about a week.  Then suddenly they stopped.  I spent about 2 hours on the phone with HP Service, and they finally said it must be my router.  So I called Netgear.  Netgear was useless!  They wanted me to agree to charges for services before they would even discuss the issue.  
    Due to information provided by HP's service support, and because Netgear will not support their product, I promptly purchased a new router - an Apple Airport Extreme.
    The Macs recognize the printer, will print if hardwired via a USB cable, but will not print wirelessly to the Officejet Pro 8600.  The PCs print fine.  
    The frustration that is being felt is compound by the fact that the Macs printed just fine with the Officejet Pro 8600 2 weeks ago, and now the printer just shows "idle"... even with a new router. (see image below)
    Please help, I appreciate any support.  
    As a side note, the HP Service rep was very friendly, and definitely tried to support the HP Product, which is much more than I can say about Netgear.
    Thank you,
    This question was solved.
    View Solution.

    Hi,
    More likely the issue related with Multicast, which Apple devices relies on to communicate with teh device through the network.
    First try unplugging the router for 30 seconds.
    Plug it back to the power and wait for 2-3 minutes.
    Turn the HP printer Off and back On, then check for any difference.
    If the same persists, try changing your router configuration as following
    Note: the settings below are not related with the HP product, I provide you the steps as a best effor and those are only based on my own knowledge. you may try modifying the router settings at your own risk:
    Open the router configuration page (can be found listed as the Default Gateway by clicking the Wireless icon on the printer, then print a network configuration report.
    Click the Advanced tab.
    Click the Setup option from the menu, then click on WAN Setup.
    Make sure to uncheck the box next to Disable IGMP Proxying and Apply the changes.
    Click the LAN Setup on the same Setup menu.
    Set the RIP Version as RIP-2 and Apply the changes.
    Reboot your router and then check for any change.
    I hope you may find that information useful, you may also use the user guide below for further information:
    http://www.downloads.netgear.com/files/GDC/WNDR4500/WNDR4500_UM_07DEC2011.pdf
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

Maybe you are looking for