Not printing! Network with OSX 10.4 and 10.5 and 10.4 computer not printing

I have a very nice problem. I have two MAC´s (iMac G5 (OSX 10.5) and PowerBook G4 (OSX 10.4). Both in a wireless Network. Up to the date I installed 10.5 on the iMac G5 everything runs perfect. Now printing from the PowerBook G4 isn´t posible any more. The printer is connected ynd shown in PRINTERS & FAX but doesn´t print. All programms freeze at the moment I choose print. Printer is working for both ciompueters when connected directly to the PowerBook (OSX 10.4). It´s also possible to print from both computers if the Printer is connected to an Airport, but doesnt print at the momento the printer is connected to the iMac with OSX 10.5 running. Printer is shown on both computers no matter where the printer is connected. Drivers are new on both computers. The printer ist en EPSON Stylus Photo R300
Who can help?

I just bought a new printer Canon Pixma iP4500 and everything is now perfect. An even the printer is a lot lot better than the old Epson One.

Similar Messages

I have MacBookpro with OSX 10.9, and my Tata Photon plus is not working on it. When I try to connect, Its not connecting.. Please Help

I have a MacBookPro with OSX 10.9, and my Tata Photon plus is not working on it. When I try to connect, Its not connecting.. Please Help
<Email Edited by Host>

Current Firefox versions require a Mac with an Intel processor and OS X 10.6 (Firefox 16 runs on Intel Mac OS X 10.5).
*http://www.mozilla.org/firefox/25.0/system-requirements/
For an unofficial Firefox 17.0.10 ESR compatible version that runs on a PowerPC Mac with OS X 10.4.11 or OS X 10.5.8 you can look at TenFourFox.
*http://www.floodgap.com/software/tenfourfox/
*http://www.macupdate.com/app/mac/37761/tenfourfox
*http://code.google.com/p/tenfourfox/wiki/ReleaseNotes1710
See also:
*http://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
*http://code.google.com/p/tenfourfox/wiki/QuickTimeEnabler
*http://code.google.com/p/tenfourfox/wiki/AAATheFAQ

I have a G4 with OSX 10.2 and my printer died. New printers only seem to work with 10.4.11 and newer - can I upgrade my G4 enough to use a new printer?

I have a G4 with OSX 10.2 and my printer died. New printers only seem to work with 10.4.11 and newer - can I upgrade my G4 enough to use a new printer?

Aha!
Well in outer Mongolia ASAP means something totally different and involves weaving tent fabric from camel hair so that has taken me a bit of time.... However if you have the patience of a saint and the compassion of Mother Theresas' more helpful sister then....
So it would appear I have the following supersonics:
OSX 10.2.1
60 Gb HD
G4 dual processor 1GHz
Now the critical issue here is that I get the computer up to speed enough to be compatible with a modern photo printer - which I think needs to be 10.4.11 or even 10.5
Any assistance would be most gratefully and humbly recieved.

Trying to set up a linksys router but the cd says it works with OSX 10.6 and later. I am currently running the newest version of mountain lion.... what is the matter with this OSX update needed?

trying to set up a linksys router but the cd says it works with OSX 10.6 and later. I am currently running the newest version of mountain lion.... what is the matter with this OSX update needed?

Your install disk must look like this
and not like this.
Those gray disks are machine specific and will only work with model of Mac that they shipped with.

Hey sur. my name anas and am from morocco i've just got a new iMac 2011 with OSX 10.7 and i want to downgrade to 10.6 please could you help sur to solve this it

hey sur. my name anas and am from morocco i've just got a new iMac 2011 with OSX 10.7 and i want to downgrade to 10.6 please could you help sur to solve this it

anas guellaf wrote:
it still make 3 bips before starting the IMAC.
That is another problem not related to the Mac OS X version you are trying to use.
Three beeps at startup means you have a bad ram module in the computer. Did you install the ram or did it come from another owner this way? The first problem you need to solve is the bad ram.
When the iMac starts, go to the apple left side of the menu bar, About This Mac, More Info, System Report, Hardware, Memory and see what the report is on the memory...does the iMac report all memory modules that have been installed as OK or does it show bad memory? If there is not any information, you then need to remove the memory modules and restart one at a time to see which is bad.
On the bottom of the screen there should be a small door that you can remove with a small screw driver. You need to lay the iMac flat, disconnect the power cord, remove that small door and remove the memory modules. You can then put two in (if it has four) and see if it starts without the beeps. Do that with each module so you find out which is bad. Once you know the bad memory, you can buy a new module, just like the ones installed, so the iMac starts without the beeps.
Next, you cannot use a DVD for another computer for your iMac unless it is from one that is identical to yours. So, you need to talk to Apple and have them send the DVD for your particular iMac.

I just bought a used computer with OSX 10.8 and want to reinstall OSX 10.6.3 Snow Leopard . . . How can I do this?

I just bought a used computer with OSX 10.8 and want to reinstall OSX 10.6.3 Snow Leopard . . . How can I do this?

Alfi94965 wrote:
I just bought a used computer with OSX 10.8 and want to reinstall OSX 10.6.3 Snow Leopard
First off you need to know the model identifier of the machine, not all Mac's can be reverted to Snow Leopard and not all Mac's can use the 10.6.3 Retail disk!
To find the model identifier, boot the machine up and hold the command key and the spacebar, Spotlight appears at the top right corner and type in System Profiler and press Enter/Return.
The model identifier should be something like "MacBook Pro 9,2" or something of that nature.
You also can hold D while the computer is booting on/near a Internet connection for a long time and this loads Hardware Test, which one of the panes will give the required information.
Next you download MacTracker here and look up your machine and it's original operating system.
(Don't click the AppStore version obviously)
http://mactracker.ca/
You may have to right or control click on the program to bypass Apple's Gatekeeper and run the program.
If you have the model identifier and the machine won't boot, then just ask here and we can tell you the information
Now all Intel Mac's issued before July 2011 can install Snow Leopard, but the Mac's released after July 2011 came with OS X 10.7 Lion and the firmware won't boot off the Snow Leopard disk. (however 10.6 can be shoehorned on using Firewire Target Disk Mode and another Mac for some models after July 2011)
Also the 10.6.3 Snow Leopard Retail Disk sold at Apple only works on Mac's that came with 10.4-10.6.2 from the factory.
Any Mac's that originally came with 10.6.3-10.6.8 from the factory need model specific disks from Apple directly, not sold at their online store, you will have to call them with your Mac's serial number and order these disks.
If you get the right disk and have the right machine, then you should be able to insert the disk and hold c down or the option/alt key and boot from the 10.6 disk.
Follow these directions and make sure to erase the ENTIRE DRIVE first in Disk Utility or you will have issues later trying to fix it from the disk.
How to erase and install Snow Leopard 10.6

How do i create a little network with my i-mac and macbook

how do i create a little network with my i-mac and macbook

Hello:
To give a sensible answer, a little more information is needed.
I am guessing that you want to set up a wireless network as you have both a desktop and laptop.
There are some pretty good tutorials/articles in the knowledge base articles.
Barry

My ipod touch is not responding when i plugged it in even with a different cord and restarting my computer

my ipod touch is not responding when i plugged it in even with a different cord and restarting my computer and i am using my moms itunes that she has had for a long time and so i cant uninstall itunes.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

HT1338 Presently running mac osx 10.5.8. Recent Firefox update says it no longer works with osx 10.5 and it's no longer supported by apple. Any suggestins?

Presently running mac osx 10.5.8. Recent Firefox update says it no longer works with osx 10.5 and it's no longer supported by apple. Any suggestins?

Use an earlier version of Firefox, use Safari, or upgrade to a later version of OS X. Any Intel Mac can run Snow Leopard.
Latest version of Safari for Leopard: http://support.apple.com/kb/DL1422
Information for Firefox: http://support.mozilla.org/en-US/kb/firefox-no-longer-works-mac-os-10-4-or-power pc
http://support.mozilla.org/en-US/kb/firefox-no-longer-works-mac-os-x-10-5

Mac with OSX 10.5 and want to go to 10.6 - can I buy and download 10.6 somewhere or can I only buy it in a store?

I run a Mac with OSX 10.5 and want to go to 10.6 because I want to get trackpad and wireless keyboard to work - can I buy and download 10.6 somewhere or can I only buy it in a store?

You can also buy it in Apple or resellers' stores - the cost is pretty much the same everywhere: $29. And, as far as I know, the latest retail version is 10.6.3, so you will need to update to 10.6.8 via the combo version in Software Update (or download it from the Apple website and install it). You'll need to do this in order to get the App Store which, in turn, is what you need to buy Lion if you want.
Edit: Make sure your Mac meets the system requirements for either SL and/or Lion.

How can I expand my wireless network with a Time Capsule and Airport Express?

My entire house is wired for ethernet access (2 floors). I have a Time Capsule on the 2nd floor that reaches the entire house except for one room.
In this one room I have an ethernet port plugged into an Airport Express.
The problem I encounter is that I have two separate wifi networks with two separate names. I realize I can extend the wireless network on the 2nd floor to the 1st floor but I can only do this wirelessly to my knowledge, and the entire problem is that the signal doesn't reach the front room. Also, there is really no place in-between that the AE can be placed to extend the reach. The building is concrete and steel, I think that has a lot to do with the problem.
My question is: Can I have two wireless routers (connected to the same home network via ethernet) broadcast the same wifi network? I also have a SONOS system that further complicates things, I'm afraid. Would it help if I drew some sort of diagram?
Thanks!

Your network is not working as you describe.. or I have misunderstood the layout..
What is the broadband type? Modem is where? What is the main router?
From your screen shots the main router is the airport express that covers one room which seems wrong.
Why isn't the TC the main router? or both bridged.. if you go back and look at the apple document.. one or both apple routers are in bridge mode..
You are having issues with setup .. half of which is caused by v6 airport utility.
What OS are you running? Please install 5.6 utility.. do it.. do it now!!
Easy for Lion.
http://support.apple.com/kb/DL1482
Messy but possible for ML.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.

Designing a network with 6 base stations and an Access control lists

I have 6 airport extreme (802.11n) base stations setup in my studio.
I'm a little concerned about security as they're all setup individually (wireless mode: Create a wireless network) with the same Network names (mystudio) and WPA/WPA2 personal password so my roaming users don't have to keep entering passwords / experience dropouts etc
i have lots of freelancers who are in and out of the studio and there isn't anyway for me to monitor who is currently connected to my wifi network.
i'd like to setup a wireless network that only allows you to connect to the WIFI network only if your MAC address is on the access control list.
is this possible with Apple Airport extreme base stations or would it be a better idea for me to invest in a 3rd party product?
all the base station are connected to an Ethernet point and have static IP's assigned to them.
whats the best way to deploy such a solution;should i keep the setting as they are and manually enter the mac address for 30 portable machines on each base station or is there a more pragmatic solution...
any help / input would be much appreciated.
Thank You

When employing Access Control in a roaming network configuration, the MAC addresses would be required to be entered atr each of the base stations ... as there is no means (unfortunately) to have them "automatically" migrate amongst them.
However, one important thing to note. Only wireless security, using WPA or WPA2, will actually secure the wireless network. MAC addresses can easily be spoofed. Someone, determined to do so, can still access your network ... even if secured by Access Control.

Proper setup for a network with Public Static IPs and Private IPs

hello all-
i am trying to setup a network with public static IP addresses and local (internal) IP addresses with 192.168.xxx.xxx format. i will try to explain as best i can how i have it set up and what my issues are.
i have COX business services in my home and 8 static public IPs assigned to me. i have tried setting this up and everything internally (192.168.xxx.xxx) works fine and all the devices can get to the outside world fine but when i try to access ANY of the devices on the public IPs from outside the network i get absolutely nothing. the browser just times out and i cannot ping the devices even though COX can see and says the devices are bridging over. COX is unable to get a response when they ping the devices either.
one of the devices is a Synology NAS with one Ethernet port that is using a public IP and the other using a 192.168.xxx.xxx address. when the Ethernet port is setup using a static public IP COX can see it but they get no response from a ping and when they go to the address to get the login page the browser times out. when i reconfigure the port for DHCP it grabs a public DHCP address and when COX pings that they get a response AND they are able to type the DHCP adress in their browser and get to the login page no problem. when i switch back to the static IP they can see it but again are unable to get a response from a ping and are unable to go to the login page.
my setup is:
COX Modem (only has 1 Ethernet port) ====>> 8 port NETGEAR Gigabit switch (all devices with Public IPs are plugged into the NETGEAR switch)
NETGEAR switch ====>> WAN Port on Airport Extreme (latest version w/all software updates)
LAN Port Airport Extreme ====>> CISCO 2960 48 port Gigabit Switch (all internal devices are plugged into the CISCO switch)
like i said everything with the 192.168.xxx.xxx connects and i can connect to just fine but none of the devices with public static IPs can be pinged even though COX can see them bridging over. i have tried all new cables on the devices and that didn't work so it has to be something with my setup.
do i need to add another router to this configuration because i have extra airport extremes lying around i can use if someone could just tell me how the setup should be. i also have a few ports open on the CISCO switch; is there a way i can use it for the 4-5 devices that have public IPs? or will that cause a problem with all the other devices plugged into it with the 192.168.xxx.xxx IP addresses?
i'm not a networking guru (obviously) so if you are able to help me get this setup properly can you try not to use Doctoral Level syntax in your response? i would greatly appreciate it!
i appreciate any and all help... thx in advance!

Duplicate posts.
Go HERE.

My Ipod is stuck on a white screen with the wrong time and a lock. computer doesn't recognized my Ipod..also gets hot when connected to charge..any ideas on how to fix this? Thank You

Hi
My Ipod nana...has frozen up and working. It shows a white screen with the wrong time and a lock symbol. When I connected it to my computer, it didn't show up. Back of Ipod gets really warm..Any ideas on how to fix it? Than You

If it happens again and the reset (home + power buttons) doesn't work, just let the battery drain; you'll know when the screen shuts off. Charge it back up and it should be fine. Frankly, I'm surprised this worked for you. Usually I hear people with this problem say that holding both buttons doesn't work, and they have to do the battery drain.
If the issue is incurable next time, you have a one-year warranty from the date of purchase.

Connecting HP Officejet 6100 to wireless network with OSX 10.9.5

Running OSX 10.9.5.
I'm trying to connect HP Officejet 6100 to wireless network without HP software since the software claims it is not compatable with my OS.
The printer works fine when connected via USB.

Hi @dj2thew,
Thank you for visiting the HP Support Forums! I see you are trying to add your HP Officejet 6100 to your Mac running the Mavericks 10.9.5 Operating system.
Because you are using the Mavericks OS X you must install the printer using the Apple Updates. Please click on the link below, this document explains how to install the print driver on a Mac for a USB or a network connection. The OS X v10.9 Mavericks driver for your printer is available through Apple Software Update (ASU). Additionally, you can perform basic print jobs using AirPrint without installing a driver.
OS X v10.9 Mavericks: Installing and Using the Printer on a Mac
Once you have installed the OJ 6100, you may notice the features you once had are limited or there are workarounds, for scanning with or without HP Software see below:
How to Scan: OS X v10.9
I hope this helps!
Thanks again,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Not printing! Network with OSX 10.4 and 10.5 and 10.4 computer not printing

Similar Messages

Maybe you are looking for