Not printing the label in the zebra printer for 4 X 7 inch size

Dear all,
Iam trying to print the barcode in the label of size 4.00 X 7.00 inche in smartforms , for which i have created a page format in SPAD with 4 x 7 inch and specified the same in Form interface and specified 4.00 x 6.00 inche in the MainWindow of smarforms,
im getting the print preview ,but it is not printing it in the printer, i checked with the zebra printer set up also and in the printing preferences i gave it as user defined.
but when i tried with page size of 4.00 x 6.00 , it is printing without any problem. but my requirement i need to print that in 4.00 x 7.00.
Can anybody guide me how to resolve this.
thanks in advance. Points assured.

sorted out by setting the SPAD - Device types
format, just added the zxxx format to this and now it is working

Similar Messages

  • Logo printing on label output from Zebra printer

    Hi guru, I am new to zpl command and I cannot find out how SAP is compiling the logo object and load into SAPSCRIPT. Bascially, our company is using zebra printer to print out receiving label with logo on it. There is a requirement to change the logo. What should be the steps?
    The transaction I was told to use is OMCF. I can see the precompile file path/name is listed in each label text object. Something list C:\BARONER3\Logos\logo1.bmp or C:\Logos\logo2.bmp. If I need to change a new bmp file for the logo, how should I do it?
    Also, is there any good documentation about BAR-ONE and ZPL command?
    According to SAP help, the label design is done in BAR-ONE then the print file is downloaded as .ITF format and import into SAPscript as standard text using SO10. However, I cannot find any standard text in SO10 which have the same text ID and text name as in OMCF -> Text Object.....what is the connection between the Standard text and the OMCF text object?
    Any advise on the details step to how to create a simple logo/barcode label using BAR-ONE and SAP is greatly appreciated.
    Thank you.
    Minami

    Hi Minami,
                   Please check the transaction SE 78 here you can upload new logo or pic with some retriction on size compnay logo should not be a problem.Then you can change the logo.I think this link might be of use to you.I am sending you link
    [SAP LOGO|Logo in sapScript;.
    For SAP Barcode Documentation Please refer this SAP Library Link:
    [Barcode|http://help.sap.com/saphelp_nw04/helpdata/en/68/4a0d5b74110d44b1b88d9b6aa1315b/content.htm]
    Have a best day ahead.

  • I want to print file labels but the avery ap doesn't support their own file labels.  Any other way to print file labels from ipad?

    I want to print file labels but the avery ap doesn't support file labels, is there ant way to print file label from an ipad?

    You cannot save to Dropbox from Pages natively, but there is a workaround that allows you to use the Copy to WebDAV to get things to Dropbox:
    http://techinch.com/2011/02/02/integrate-dropbox-with-pages-keynote-and-numbers- on-ipad/
    As to the "Send to iTunes" command "not playing ball", if you'll post specifics, perhaps someone can help you sort that out. It should be pretty straightforward.
    Regards.

  • Label Printing Using Address Book - How can I Print multiple labels of the same name?

    Label Printing Using Address Book - How can I Print multiple labels of the same name?

    I used to be able to print multiple copies of the same picture on one page using iphoto. There was a customise button when you went through to print and it was there somewhere. I can't see it anymore - maybe since an upgrade.
    It's gone. But as a work-around, duplicate your photo (⌘D) to create as many versions as you want copies and select all at once. Then use the "Custom" print layout and set the photo size you want.
    After printing, trash the added versions.

  • HT1923 I Can't print CD labels with the new update of iTunes

    I cann't print CD labels with the new update of iTunes.

    Don't know whether you ever found the templates, but here is a site with many different labels: http://www.worldlabel.com/Pages/wl-ol5025.htm#templates
    I found what I needed in a Word document for Memorex labels.
    Good luck!

  • SAP Script : Control Commands for printing Label (barcode) by Zebra Printer

    Hello,
    I would like to know the control commands in sap script for Zebra Printer. The purpose of task is to print a field in barcode format in Right Bottom of the label.
    The sample code is placed below. Kindly have a look at it. The problem now i am facing is, the barcode for Customer PO is printing on the wrong place (Left Bottom, the text & barcode are overwriting). Can anyone suggest a possible way or can any one send the document for Barcode commands in SAP Script for Zebra Printer.
    Sample script code:
    Initialization and reset Barcode
    XAMCY^XZ
    Start
    ^XA
    Barcode setup
    ^BY3,2.7,2.2
    Set label home position
    ^LH
    ^FWN
    FO385,025A0R,40,50FDPN: &VBAP-MATNR&FS
    FO385,725A0R,40,50FD&VBAP-ARKTX&FS
    FO385,1710A0R,40,50FDRtns: &zsntsc-contr&FS
    FO345,025A0R,40,50FDService Order# &AUFK-AUFNR&FS
    FO345,725A0R,40,50FDSerial# &EQUI-SERNR&FS
    FO345,1710A0R,40,50FDRepair Order# &VBAP-VBELN&FS
    FO245,025B3R,N,90,N,NFD&AUFK-AUFNR&FS
    FO245,725B3R,N,90,N,NFD&EQUI-SERNR&FS
    FO245,1710B3R,N,90,N,NFD&VBAP-VBELN&FS
    FO138,1710A0R,40,35FDCustomer PO# &VBKD-BSTKD&FS
    FO98,025A0R,40,50FDWrnty: &W_WARRANTY&FS
    FO98,605A0R,40,50FDRoute: &W_ROUTE&FS
    FO58,025A0R,40,35FDShip-to-name: &W_NAME1&FS
    FO58,1325A0R,40,35FDMinor Group/Nr: &TVM5T-BEZEI&FS
    FO58,1325A0R,40,35FDMinor Group/Nr: &TVM5T-BEZEI&FS
    FO18,885A0R,40,35FDReported By: &QMEL-QMNAM&FS
    FO18,1710B3R,N,90,N,NFD&VBKD-BSTKD&FS
    ^XZ
    Thanks in Advance,
    Ramasamy

    HI
    GOOD
    GO THROUGH THIS
    A barcode solution consists of the following:
    - a barcode printer
    - a barcode reader
    - a mobile data collection application/program
    A barcode label is a special symbology to represent human readable information such as a material number or batch number
    in machine readable format.
    There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP support natively in it's printing protocols.
    You can print barcodes from SAP by modifying an existing output form.
    Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format language) or SmartForms that is more of a graphical form design tool. 
    Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.
    The next part of the equation can be a bit tricky as you will need to get a printer to print that barcode font. Regular laser printers does not normally print barcode fonts, only specialized industrial printers that is specifically designed to support that protocol and that uses specialized label media and heat transfer (resin) ribbon to create the sharp image required for barcodes.
    Not to fear though, there are two ways to get around this:
    - You can have your IT department do some research - 
    most laser printers can accept a font cartridge/dimm chip (similar to computer memory), called a BarDIMM that will allow a laser printer to support the printing of barcodes.
    - Secondly, you can buy software that you can upload in your SAP print Server that will convert the barcode symbology as an image that will print on a regular laser printer. I found that this option results in less sharper barcodes. This option is really if you need to convert a large quantity of printers (>10) to support barcodes. 
    - Thirdly, you can buy a third party software like Barcode.dll and install on your frontend PC connected to the laser printer.
    Now you have a barcode printed - what next?
    Well there are two options, depending on your business requirements:
    - You can use an existing SAP transaction on a regular workstation and get a barcode wedge reader to hook up between the keyboard and the PC. These wedge readers comes in a wand or scanner format. There are even wireless wedge scanners available that allows you to roam a few yards from the workstation to scan a label. This approach is mostly used where you want to prevent human errors in typing in long material, batch or serial numbers in receiving or issuing of material. The problem is that it's just replacing the keyboard input and you are basically locked down in one location and have to bring all the material to that location to process.
    - Another solution is to use SAPConsole transactions
    or write your own ABAP Dialog programs that will fit onto a barcode enabled wireless handheld terminal and that will follow the business logic as executed on the shop floor. 
    These programs are highly complex exercises in industrial engineering and ergonomics because of the limited screen sizes and limited ability to accept keyboard input. The user is instructed step-by-step and only scan and push F-keys to interact with the SAP system. Scan, scan, beep, beep, enter - highly automated.
    GO THROUGH THESE LINKS
    http://www.sap-img.com/abap/details-information-about-sap-barcodes.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/68/4a0d5b74110d44b1b88d9b6aa1315b/content.htm
    THANKS
    MRUTYUN

  • Use of windows default printer causes labels to be mis-printed.

    I am printing a crystal report via the vb.net viewer to an avery dennison label printer.
    I have configured the size of the label for the avery dennison into the Seagull driver that exists on the workstation where I am printing the report.
    The crystal report has been configured to use the printer name and page size from the driver on the workstation.
    When I make the Avery Dennison printer on the workstation the windows default printer and print the report to the Avery Dennison printer, the label prints out correctly.
    When I make another printer on the workstation the windows default printer and print the label to the Avery Dennison printer, the label prints across two labels.
    Any ideas?

    Hi Praveen,
    #No of Copies#  in transaction /SCWM/PRWO6   is not actual number of copies . This is more  an index how the number of copies is determined . Please use F4  on this field and you will see that index 2 means "Number of Copies" = 1.
    In Transaction /SCWM/ 60000431 you need to actual number of copies for your document. But this number  is only taken if you set the index in /SCWM/PRWO6 to "0".
    I hope this information helps you.
    Sabya

  • Need Help to update the labels in the GUI syncronously - Swing application

    Hello everyone,
    I need some help regarding a swing application. I am not able to syncronously update the counters and labels that display on my Swing GUI as the application runs in the background. But when the running of application is completed, then the labels on the GUI are getting updated, But I want update the labels and counters on the GUI syncronously as the code executes... below I am giving the format of the code I have written..............
    public class SwingApp extends JFrame{
            // here i have declared the label and component varibles like...
                      private JTextField startTextField;
           private JComboBox maxComboBox;
           private JTextField logTextField;
           private JTextField searchTextField;
           private JLabel imagesDownloaded1;
           private JLabel imagesDownloaded2;
           private JLabel imagesDidnotDownload1;
           private JLabel imagesDidnotDownload2;
                      private JButton startButton;
    //now in the constructer.............
    public Swing(){
    //I used gridbaglayout and wrote the code for the GUI to appear....
    startButton = new JButton("Start Downloading");
        startButton.addActionListener(new ActionListener() {
          public void actionPerformed(ActionEvent e) {
            try{
                 actionSearch();   //actionSearch will contain all the code and the function calls of my application...........
            }catch(Exception e1){
                 System.out.println(e1);
        constraints = new GridBagConstraints();
        constraints.gridwidth = GridBagConstraints.REMAINDER;
        constraints.insets = new Insets(5, 5, 5, 5);
        layout.setConstraints(startButton, constraints);
        searchPanel.add(startButton);
    //update is a function which initiates a thread which updates the GUI. this function will be called to pass the required variables in the application
    public void update(final int count_hits, final int counter_image_download1, final int didnot_download1) throws Exception{
         Thread thread = new Thread(new Runnable() {
             public void run() {
                  System.out.println("entered into thread");
                  System.out.println("the variable that has to be set is " + count_hits);
                  server_hits_count.repaint(count_hits);
                  server_hits_count.setText( " "+ Integer.toString(count_hits));
                  imagesDownloaded2.setText(" " + Integer.toString(counter_image_download1));
                  imagesDidnotDownload2.setText(" " + Integer.toString(didnot_download1));
                  repaint();
         //this.update(count_hits);
         thread.start();
    //Now in main............................
    public static void main(String[] args){
    Swing s = new Swing();
    s.setVisible(true);
    }//end of main
    }//end of class SwingAbove I have given the skeleton code of my application........ Please tell me how to update the GUI syncronously...
    Please its a bit urgent...............
    Thank you very much in advance
    chaitanya

    First off, note that this question should have been posted in the Swing section.
    GUI events run in a separate thread (the AWT / Event Dispatch Thread) than your program.
    You should be invoking AWT/Swing events via SwingUtilities.invokeLater().
    If for whatever reason you want to have the program thread wait for the event to process
    you can use invokeAndWait().
    http://java.sun.com/javase/6/docs/api/javax/swing/SwingUtilities.html

  • Pie chart doesn't show the label of the last slice

    Post Author: saschaherrle
    CA Forum: Charts and Graphs
    Hi there...
    I have this problem with displaying the label of the last pie slice of my report. It is working perfectly fine in my testing environment, but it just doesn't want to show in the client environmet... I don't know what to try anymore. I've tried all the other label location options, but they also dont help. There are five slices on the pie chart with the following values:
    1.9%
    43.6%
    51.1%
    2.3%
    1.1%
    All the labels and feeler lines are showing except for value number 5.
    Any help or advice would be greatly appreciated. Thanks
    P.S. I'm using Crystal Reports XI Version 11.0.0.1994 and the client is just running the Crystal Runtime (Maybe this helps... I hope)

    ewilly wrote:Sorry to say that but i'm not unhappy to see i'm not alone to encounter this issue
    I aggree with you : it's only a partial issue as those partitions are mounted under /media with their label name.
    As krusader is able to retrieve the label name i don't think it's an udisks issue so it's more related to a kde functionnality. I looked for missing (optionnal or not) dependencies but without success.
    Any idea is welcome... perhaps opening a bug could help ??
    I have run out of ideas.
    If you tried krusader, yes, it is quite safe to assume it is not a udisks problem, since I tried nautilus which uses udisks2. I also would rule out udev/systemd. Leaves solid, kdelibs, and the kdebase sources.
    As said, on gentoo, kdelibs are compiled with udev dependency which I have not seen in the pkgbuild for kdelibs.
    I think a bug report is a good idea.
    Last edited by artoo (2012-09-06 18:01:49)

  • Folder action to change the label of the folder

    Hi all
    I would like to use Automator/Folder Actions to set the Label of the folder to show that it contains a file that was created or modified as follows:
    Red if in the last three days,
    Orange if over three days but less than seven; and
    Yellow if over seven days but less than fourteen
    Oh, and clear the folder label if the contents of the folder are over fourteen days old.
    Is it possible to do using Automator and folder actions?
    Thanks
    Jai
    iMac G5; iBook G3; PB165c; PB170; Mac IIcx; Mac SE/30; Mac SE; Mac Plus; Newton 130; 2gen iPod 10G     Mac OS X (10.4.7)   MacUser since 1984... and waiting for a tablet (like the Nokia 770 with MacOSX)

    In Automator-No
    The trigger for folder actions to run is the act of adding a file/folder to the folder which has the action applied. If you don't add anything, they won't do anything.
    You could probably get close to what you want using Smart Folders. It won't be color-coded or perfect though because modifying a file doesn't always reflect on the modification date of the folder. And parent folders are not affected by changes made in sub-folders.

  • [svn:fx-4.x] 14772: The check mark in the CheckBox components should never be mirrored, even if the label in the CheckBox is mirrored.

    Revision: 14772
    Revision: 14772
    Author:   [email protected]
    Date:     2010-03-16 07:14:46 -0700 (Tue, 16 Mar 2010)
    Log Message:
    The check mark in the CheckBox components should never be mirrored, even if the label in the CheckBox is mirrored.
    QE notes:
    Doc notes: None
    Bugs: SDK-25817
    Reviewed By: Kevin, Jason
    Tests run: checkintests
    Is noteworthy for integration: No
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-25817
    Modified Paths:
        flex/sdk/branches/4.x/frameworks/projects/spark/src/spark/skins/spark/CheckBoxSkin.mxml
        flex/sdk/branches/4.x/frameworks/projects/sparkskins/src/mx/skins/spark/CheckBoxSkin.mxml

    What are you supposed to cast it to? I might have tried to cast it to something wrong.
    I tried
    TableCellRenderer tcr = table.getDefaultRenderer(Boolean.class);
    ((DefaultTableCellRenderer)tcr).setHorizontalAlignment(SwingConstants.LEFT);and that gave me a ClassCastException. But I might have been trying to cast it to the wrong thing.

  • TFS Customization - Can we just rename the label of the control rather than renaming fields?

    I wanted to reuse some existing fields with different values. I can customize XML to add different values for the existing field since we import the changes to specific project. And I will just rename the Label of the control rather than renaming the field
    which will create some potential problems on importing the previous TFS data. I just wanted to ensure that this is the proper way to do it. I did the changes in test server and it works fine. But I need a consultation from experienced guys to know whether
    they faced any issues in this thatswhy I am here.

    Changing the label is perfectly fine. This will not affect any migration attempts.  The form label for a field is separate from the field name and refname.

  • Return the label of the check box if check box is selected....

    hi frns...can u please tell me their is a way we can have the label of the check box only if it is selected...the method getLabel() return the label whether its selected or not....

    yaa i agree and i won repeat it as i mentioned but i wish u had written ur first message the same way as u have written this message...that one was more like u lashin out on me for a very simple and unintentional mistake...anywasy truce for now...can u tell me how to delete the topic once u have recieved ur reply...n keep in touch u ll be hearing a lot from me ( i m a new comer to java )...

  • I received a $25 iTunes gift card when cashing in my Air Miles points and when removing the label on the back or the card (which had tape over top of it) there is a number missing from the 16 digit number.  What do I do?

    I received a $ 25 iTunes gift card - when I cashed in some air miles points.  Unfortunately the label on the back was covered in tape and when I tried to remove the tape and the label I found that there were only 15 numbers out of the sixteen.  How can I find out what the number/letter is that is missing?  If I provide you with the GCA # will that help?
    Please get back to me,

    Consult this handy guide: iTunes Store: Invalid, inactive, or illegible codes

  • How to Make the label of the active tab-page BOLD?

    Hi All
    I am working on forms 10g(version 10.1.2.0.2 ) with Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 on windows 2000 platform.
    My requirement is to make the label of the active tab-page either in italics or with a different color or make it BOLD than the other pages of the canvas.
    Any suggestions ?
    Regards
    Mohan

    there are no properties for those requirements on tab-pages. You can't do it.
    Setting italic for all Tabpage-Labels is possible, when you change it in the canvas-properties. But you can't change only one tabpage.
    One Solution is, what Jeneesh said: Active-Style. But only "Bold" and for the active tab.
    Gerd

  • Changing the Label of the LDB - PNP Screen Field(Date field)

    Hi,
    I got a req. to change the label of the field "Data Selection Period".  This field is from PNP LDB.
    Pls let me know, is there any FM or any other process?

    you can customize the PNP selection screen by creating a report class. you will find the button in the report attributes.
    or you can define your own selection view via SE80 an maintaining table T599C.
    but I dont't think you will be able to rename the field lable.

Maybe you are looking for