Not properly displayed report in JRC but in CR designer

Hi,
The report has two XML data sources and data are displayed in a Table. Table is designed with multiple column feature. When I run this report in CR designer preview it works fine. But When I run it in JRC, data are displayed on the report. But not in the expected format. Totally different than the CR designer preview.
We are using Crystal report 2008.
Can you tell me the cause/ solution for this problem?
Thanks,
Makesh
Edited by: Makesh on Sep 26, 2009 1:44 AM
Edited by: Makesh on Sep 26, 2009 1:44 AM

Is it possible for you to post the screenshots of the report viewed in CR designer and through JRC?

Similar Messages

  • BI query not properly displaying in Consumer Portal - Through FPN - RRA

    Hi Everyone,
    we have implemented FPN between EP 7.0 and BI 7.0 . A role with BI reports (iview created using Bex7.0 template) are working fine in BI Portal.
    When its RRA to a users in EP-consumer portal, its not coming properly. I mean it shows some default header/Menu (like New Analysis Open, Save As, Information, Send etc..) in EP but not displaying the details of the report. Other URL iviews are working fine in RRA, just BI query is not coming properly. All pre-requisite for FPN is done properly and SSO configured.
    Appreciate if some one can provide a solution
    Thanks

    Dear Guru,
    I am also facing the same problem.  What you had faced earlier.  Can you explain the detailed solution to resolve this
    problem. BI query not properly displaying in Consumer Portal - Through FPN - RRA.
    If you can explain the solution that will be great.
    With Thanks and Regards,
    Anil Kumar.

  • Lmstat not properly displaying users (linux)

    Hi all,
    A linux-based shake license server at our facility is not able to properly display current users. The lmstat command will show the licenses available, but not the current activity. This is for Shake v4.1 and v9.2 of the Globetrotter flexlm tools. Is this a known bug? Thanks in advance.

    Dear Guru,
    I am also facing the same problem.  What you had faced earlier.  Can you explain the detailed solution to resolve this
    problem. BI query not properly displaying in Consumer Portal - Through FPN - RRA.
    If you can explain the solution that will be great.
    With Thanks and Regards,
    Anil Kumar.

  • Why do TOC do not properly display levels,... even after I set them to?

    All,
    I am having a major hard time trying to get my TOCs to properly display levels. I have been doing research on the subject, but it seems any recommendations have proved futile.
    The issue:
    My ID docs TOC's do not display levels at all
    I have pretty much tried everything. I have gone to simple styles for Chapters and Sub Chapters to see what the issue would be
    Image:
    Some Findings
    One article I found which outlined ID having issues with inset text boxes
    It seems setting an inset on text boxes with TOC content affects the display of such
    I tried removing any insets but results still did not fix the issue i face
    Questions
    What the hell am i doing wrong?
    Is this a bug in ID CS6?
    Is there anything I should not be doing when formatting a style that will be used on the TOC?
    Are there any "NO NOS" I should be aware of here?
    I mean, the above image is a test i built using a bare bones approach. The "Chapters" and "Sub Heads" styles are truly basic formats. The only attributes to these styles is a change in font style and size:
    Thank you to anyone who can help me on this.
    PixelNovae
    ID 6 (v8.0)

    Hi all,
    Thanks to everyone for all your comments.  To remove any possible conflicts, I did not apply any entry styles to the entries because i thought:
    The TOC function generate levels independent of styles
    Levels are automatically applied to any entry (TOC levels override everything else)
    That levels override any styles one may apply to the entry
    Basically, I do not need a style to create an indentation in my TOC. Levels create the indentation. (thus my example using the default ID Basic Paragraph Style)
    Are the above assumptions wrong? If I am wrong, then are you guys saying I would need to create a TOC specific style denoting indentation for ever level?
    IOWs, following my example:
    Chapters =        LV1     = Create a "TOC Paragraph Style X"  that indents (say) 0pxs
    Sub Heads =     LV2     = Create another "TOC Paragraph Style Y" that indents (say) 20pxs
    On the table of contents I would need to apply each their corresponding style in order to create TOC indents:
    "Chapters" ---> TOC Paragraph Style X
    "Sub Heads" ---> TOC Paragraph Style Y
    If this is the fix, then I must say that this is a very cumbersome approach. (Hell, I would ask, why give me the levels option in the firts place in the TOC dialogue box!) If I have a book with a ton of levels, it will be pretty darn hard to manage so many styles.
    PS: sorry I omitted one dialogue screen in my original post. Here is what I am doing.
    Thanks again. I'm perplexed at this, but nevertheless thankful for all your shared insight.
    PixelNovae
    ID CS 6

  • Some fonts I use for my iWeb-made site are not properly displayed on other computer. How can I sort it out?

    Hello everybody.
    I have made a website and I have noticed that some fonts and some background shapes are not correctly displayed on other computers (non Mac users).
    Could you help me to sort out this problem?
    Thanks
    Andrea

    It's not a browser issue per se either.
    You see the Font because the font is your computer. The same font has to be on the computer of your visitor.
    iWeb use a substitute font based on a font list it uses. If that substitute font is missing too, the browser chooses a similar font, which is not always the one you want.
    You can force your font to display on a PC (but not with Internet Explorer) using a custom stylesheet with an embedded font. See it here :
    http://www.wyodor.net/mfi/global/Blank.html
    http://www.wyodor.net/_Demo/Fancy/Dynamic_Text.html
    http://www.google.com/search?q=embedded+font

  • New MacBookPro 13" (early 2011) not properly displaying 1920x1200 on an external display

    Hi,
    A week ago I got a new MacBookPro 13". Early 2011 model, the ones that now come with an Intel HD Graphics 3000 video card. I am connecting it to a Sun 24.1" LCD Monitor v4 (http://www.oracle.com/us/products/servers-storage/desktop-workstations/030743.ht m) through a Mini DisplayPort to VGA Adapter. Supposedly the Sun monitor is running at 1920x1200 @ 60hz (with the MacBookPro at its original resolution of 1280x800).
    The problem is that the image on the Sun monitor is not using the whole screen. The MacOs is 10.6.7 and I have downloaded all updates as of today (June 13 2011). I am *not* mirroring displays, of course.
    Now, for the record, I still have my old MacBook 13", which the new one was supposed to replace and this problem is *not* present. 1920x1200 on the external Sun display uses all the screen. That laptop has an NVIDIA GeForce 9400M video card. Its MacOS is also 10.6.7, with all software updates as of today.
    My current suspicion is the new MBP is somehow trying to force the aspect ratio of the external display to be that one of HD, but it is only a suspicion. Any help with this please? Is something known? Is it a feature or a defect of my laptop and I should try to get another one? If it is a feature, does it mean that I will not be able to fully use any of the three 24.1" Sun monitors that I have? (one at home, one on each of my two offices?)
    Thanks...
    Manuel

    For some reason, using a dvi adapter instead of a vga one works fine.

  • Crystal Report Viewer 13.0.2000 Group Tree does not properly display in IE8

    We migrated from crystal reports 10.x.x to Crystal Reports 13.0.2000.
    The group tree when rendered in IE8 shows the group icon in the middle.
    See the attached picture.
    However, the display is good in Google Chrome and IE11.
    Since we already have a customer base using IE8, need a fix to resolve the IE8 issue.

    Not to argue with Brian, but the Supported Platforms still contains IE 8 as being supported.
    You do not mention the service pack you are using or if you can reproduce the issue on your test environment(?).
    Links to up to date SPs are here:
    SAP Crystal Reports, developer version for Microsoft Visual Studio: Updates & Runtime Downloads
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow me on Twitter

  • Navigational Attribute is not properly displaying

    Hello,
    We have a "Sales Group" navigational attribute YCUST_SAL-YSALE_GRP in a BW report. We have adjusted a sales group for a customer in R3 from F10 to E49 and hte same has been pulled to BW side,.
    we have activated the master data manually and we are able to see the new data is available against the customer.
    But when we refresh teh report, for that customer we are able to see only F10 as the sales group,.
    For cross check, we have sales group display property also. where we are able to see E49.
    Please let us know why we are seeing inconsistency between display and navigational attribute for a same infoobject.
    Thanks. Karthik

    Hello,
    It seems Master data is not activated properly....
    Whether the query is fetching data from Aggregates, if so you have to do Attribute changerun for this infoobject
    goto SE38 and run this program RSDDS_AGGREGATES_MAINTAIN it will Info object name...Provide your info object and execute...
    Your problem will solve.
    Regards,
    pavan.

  • Error trying to display reports in JRC

    Hi,
    We have written some rather complex reports using Crystal Reports 2008. The reports are working well within the report editor, but when we try to run them in a JRC web application, they both fail.
    We have 2 different error messages:
    Error
    Invalid Join Tree node.
    and
    Error
    Unexpected database connector error.
    The datasource is a JDBC connection, and the same errors occur with MySQL and Microsoft SQLServer. We use an SQL Command in both reports, to call a stored procedure. We also use subreports. The datasource for both reports is fairly similar, so nothing to explain the different error messages.
    After logging the queries in MySQL, I found out that Crystal Reports will send all the required querys, but JRC doesn't send a single SELECT query. The other difference is that JRC sends a CONNECT message multiple times, without sending a password.
    32 Connect     Access denied for user 'demo'@'localhost' (using password: NO)
    33 Connect     Access denied for user 'demo'@'localhost' (using password: NO)
    34 Connect     Access denied for user 'demo'@'localhost' (using password: NO)
    35 Connect     Access denied for user 'demo'@'localhost' (using password: NO)
    36 Connect     Access denied for user 'demo'@'localhost' (using password: NO)
    37 Connect     Access denied for user 'demo'@'localhost' (using password: NO)
    38 Connect     Access denied for user 'demo'@'localhost' (using password: NO)
    39 Connect     Access denied for user 'demo'@'localhost' (using password: NO)
    40 Connect     Access denied for user 'demo'@'localhost' (using password: NO)
    41 Connect     Access denied for user 'demo'@'localhost' (using password: NO)
    42 Connect     Access denied for user 'demo'@'localhost' (using password: NO)
    43 Connect     Access denied for user 'demo'@'localhost' (using password: NO)
    44 Connect     Access denied for user 'demo'@'localhost' (using password: NO)
    45 Connect     Access denied for user 'demo'@'localhost' (using password: NO)
    46 Connect     Access denied for user 'demo'@'localhost' (using password: NO)
    47 Connect     Access denied for user 'demo'@'localhost' (using password: NO)
    48 Connect     Access denied for user 'demo'@'localhost' (using password: NO)
    49 Connect     Access denied for user 'demo'@'localhost' (using password: NO)
    50 Connect     demo@localhost on demo
    50 Query       SHOW VARIABLES
    50 Query       SHOW COLLATION
    50 Query       SET NAMES utf8
    50 Query       SET character_set_results = NULL
    50 Query       SET autocommit=1
    We have written other reports using the same SQL Command to call the same Stored Procedure, and they work just fine. There is something special about those reports that we can't figure out.
    We use the same JDBC connector for both the report editor and the JRC web application.
    I have also written a quick-and-dirty Java viewer application, based on the CR Java Runtime 12.2.200, and the same problem occurs.
    Same with previewing the reports in Crystal Reports For Eclipse 2.
    Has anybody experienced a similar problem? Is there something obvious that we are missing?
    Thank you,
    JC
    Edited by: Jean-Charles Boude on Mar 9, 2009 5:52 PM

    Got round of the problem of multiple failed database logins now, by setting the database username and password to all subreports as well as the main report:
    reportClientDocument.getDatabaseController().logon(DB_USER_NAME, DB_PASSWORD);
    IStrings subreportNames = reportClientDocument.getSubreportController().getSubreportNames();
    for (int i = 0; i < subreportNames.size(); i++) {
      ISubreportClientDocument subreportClientDoc = reportClientDocument.getSubreportController().getSubreport(subreportNames.getString(i));
      subreportClientDoc.getDatabaseController().logon(DB_USER_NAME, DB_PASSWORD);
    However my main problem is still there, I get the same error message as before, and no query whatsoever is sent to the database:
    090311 11:43:17        2635 Connect     demo@localhost on demo
                 2635 Query       SHOW VARIABLES
                 2635 Query       SHOW COLLATION
                 2635 Query       SET NAMES utf8
                 2635 Query       SET character_set_results = NULL
                 2635 Query       SET autocommit=1
                 2635 Quit
    If anybody can make sense of the stack trace, there it is:
    03-11@11:43:17 INFO  (            ?:?)     - Time to load report /D:/FullReport2.rpt took 94 ms
    03-11@11:43:17 INFO  (            ?:?)     -  received request: fetchReportContents
    03-11@11:43:17 INFO  (            ?:?)     -  received request: modifyParameterFieldCurrentValuesRequest
    03-11@11:43:17 INFO  (            ?:?)     -  received request: modifyParameterFieldCurrentValuesRequest
    03-11@11:43:17 INFO  (            ?:?)     -  received request: setSQLLogonInfoRequest
    03-11@11:43:17 INFO  (            ?:?)     -  received request: setSQLLogonInfoRequest
    03-11@11:43:17 INFO  (            ?:?)     -  received request: setSQLLogonInfoRequest
    03-11@11:43:17 INFO  (            ?:?)     -  received request: setSQLLogonInfoRequest
    03-11@11:43:17 INFO  (            ?:?)     -  received request: setSQLLogonInfoRequest
    03-11@11:43:17 INFO  (            ?:?)     -  received request: setSQLLogonInfoRequest
    03-11@11:43:17 INFO  (            ?:?)     -  received request: setSQLLogonInfoRequest
    03-11@11:43:17 INFO  (            ?:?)     -  received request: getPromptConnInfos
    03-11@11:43:17 INFO  (            ?:?)     -  received request: fetchSubreportNames
    03-11@11:43:17 INFO  (            ?:?)     -  received request: fetchSubreportContents
    03-11@11:43:17 INFO  (            ?:?)     -  received request: setSQLLogonInfoRequest
    03-11@11:43:17 INFO  (            ?:?)     -  received request: setSQLLogonInfoRequest
    03-11@11:43:17 INFO  (            ?:?)     -  received request: setSQLLogonInfoRequest
    03-11@11:43:17 INFO  (            ?:?)     -  received request: setSQLLogonInfoRequest
    03-11@11:43:17 INFO  (            ?:?)     -  received request: fetchSubreportContents
    03-11@11:43:17 INFO  (            ?:?)     -  received request: setSQLLogonInfoRequest
    03-11@11:43:17 INFO  (            ?:?)     -  received request: fetchSubreportContents
    03-11@11:43:17 INFO  (            ?:?)     -  received request: setSQLLogonInfoRequest
    03-11@11:43:17 INFO  (            ?:?)     -  received request: setSQLLogonInfoRequest
    03-11@11:43:17 INFO  (            ?:?)     -  received request: setSQLLogonInfoRequest
    03-11@11:43:17 INFO  (            ?:?)     -  received request: fetchSubreportContents
    03-11@11:43:17 INFO  (            ?:?)     -  received request: setSQLLogonInfoRequest
    03-11@11:43:17 INFO  (            ?:?)     -  received request: setSQLLogonInfoRequest
    03-11@11:43:17 INFO  (            ?:?)     -  received request: setSQLLogonInfoRequest
    03-11@11:43:17 INFO  (            ?:?)     -  received request: queryServerCapabilitiesRequest
    03-11@11:43:17 DEBUG (            ?:?)     - PageViewRequestHandler has been successfully created
    03-11@11:43:17 INFO  (            ?:?)     -  received request: fetchReportPageRequest
    03-11@11:43:17 INFO  (            ?:?)     -  attempting to send engine request
    03-11@11:43:17 INFO  (            ?:?)     -  successfully sent engine request
    03-11@11:43:17 DEBUG (            ?:?)     - Requesting page 1
    03-11@11:43:17 DEBUG (            ?:?)     - New page formatter created with view context: ViewContext (Group Path: [])
    03-11@11:43:17 ERROR (            ?:?)     -  detected an exception: Invalid Join Tree node.
         at com.crystaldecisions.reports.datafoundation.DFQuery.for(Unknown Source)
         at com.crystaldecisions.reports.datalayer.a.do(Unknown Source)
         at com.crystaldecisions.reports.datalayer.a.a(Unknown Source)
         at com.crystaldecisions.reports.dataengine.m.b(Unknown Source)
         at com.crystaldecisions.reports.dataengine.j.b(Unknown Source)
         at com.crystaldecisions.reports.dataengine.m.o(Unknown Source)
         at com.crystaldecisions.reports.dataengine.m.a(Unknown Source)
         at com.crystaldecisions.reports.dataengine.ContextNode.a(Unknown Source)
         at com.crystaldecisions.reports.dataengine.ContextNode.a(Unknown Source)
         at com.crystaldecisions.reports.dataengine.j.case(Unknown Source)
         at com.crystaldecisions.reports.dataengine.h.<init>(Unknown Source)
         at com.crystaldecisions.reports.dataengine.DataContext.a(Unknown Source)
         at com.crystaldecisions.reports.dataengine.DataProcessor2.a(Unknown Source)
         at com.crystaldecisions.reports.dataengine.DataProcessor2.a(Unknown Source)
         at com.crystaldecisions.reports.dataengine.DataProcessor2.new(Unknown Source)
         at com.crystaldecisions.reports.dataengine.DataProcessor2.try(Unknown Source)
         at com.crystaldecisions.reports.dataengine.DataProcessor2.int(Unknown Source)
         at com.crystaldecisions.reports.dataengine.DataProcessor2.I(Unknown Source)
         at com.crystaldecisions.reports.formatter.formatter.objectformatter.ObjectFormatter.fm(Unknown Source)
         at com.crystaldecisions.reports.formatter.formatter.paginator.PageFormatter.if(Unknown Source)
         at com.crystaldecisions.reports.formatter.formatter.paginator.PageFormatter.a(Unknown Source)
         at com.crystaldecisions.reports.formatter.formatter.paginator.PageFormatter.Y(Unknown Source)
         at com.crystaldecisions.reports.formatter.formatter.paginator.PageFormatter.moveToPageN(Unknown Source)
         at com.businessobjects.reports.sdk.requesthandler.ReportViewingRequestHandler.a(Unknown Source)
         at com.businessobjects.reports.sdk.requesthandler.ReportViewingRequestHandler.byte(Unknown Source)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.do(Unknown Source)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(Unknown Source)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(Unknown Source)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.a(Unknown Source)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.call(Unknown Source)
         at com.crystaldecisions.reports.common.ThreadGuard.syncExecute(Unknown Source)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.for(Unknown Source)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.int(Unknown Source)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
         at com.businessobjects.sdk.erom.jrc.a.a(Unknown Source)
         at com.businessobjects.sdk.erom.jrc.a.execute(Unknown Source)
         at com.crystaldecisions.proxy.remoteagent.RemoteAgent$a.execute(Unknown Source)
         at com.crystaldecisions.proxy.remoteagent.CommunicationChannel.a(Unknown Source)
         at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.ds.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.ReportSource.getPage(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.getPage(Unknown Source)
         at com.businessobjects.report.web.event.s.a(Unknown Source)
         at com.businessobjects.report.web.event.s.a(Unknown Source)
         at com.businessobjects.report.web.event.bt.a(Unknown Source)
         at com.businessobjects.report.web.event.bw.broadcast(Unknown Source)
         at com.businessobjects.report.web.event.am.a(Unknown Source)
         at com.businessobjects.report.web.a.t.if(Unknown Source)
         at com.businessobjects.report.web.e.a(Unknown Source)
         at com.businessobjects.report.web.e.a(Unknown Source)
         at com.businessobjects.report.web.e.a(Unknown Source)
         at com.crystaldecisions.report.web.ServerControl.a(Unknown Source)
         at com.crystaldecisions.report.web.ServerControl.processHttpRequest(Unknown Source)
         at org.apache.jsp.CrystalReportViewer2_jsp._jspService(CrystalReportViewer2_jsp.java:103)
         at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
         at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:374)
         at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:342)
         at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:267)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
         at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:286)
         at org.apache.coyote.http11.Http11AprProcessor.process(Http11AprProcessor.java:857)
         at org.apache.coyote.http11.Http11AprProtocol$Http11ConnectionHandler.process(Http11AprProtocol.java:565)
         at org.apache.tomcat.util.net.AprEndpoint$Worker.run(AprEndpoint.java:1509)
         at java.lang.Thread.run(Unknown Source)
    Not sure what to do next, I guess I'll just keep digging...

  • Pasted objects will not properly display.

    I have several users at my company who are experiencing the same issue. The issue being, that when they paste objects that were copied from other programs into an Outlook 2010 email or they receive pictures objects in an email, those objects' source formatting
    is not displayed. Instead these objects show up as a blank white square within the email. I've attempted to follow several of the previous threads concerning similar issues, but have yet to find a fix for this.
    So far I have made sure that the Cut, Copy, and Paste options under the menu Options > Mail > Editor Options > Advanced tab are set to Keep Source Formatting (default). However, this does not prevent this issue from occurring. I've tried recreating
    each user's profile as well as re installing one user's Office 2010 suite entirely. I'm starting to think this is caused by a windows update error of some kind. May I please get some assistance with this. 

    Hi,
    First of all, please make sure the users are editing emails with HTML Format. If it's Rich Text Format or Plain Text Format, when pasting the objects it's easy to lose some original formats.
    Did this issue occur suddenly since an update? I haven't heard any report about such issue so far.
    Regards,
    Melon Chen
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Motion 4 - Canvas not properly displaying media

    I have a new mac pro tower and have recently installed FCP 3. Everything has been working fine until I started with Motion. It seems that no matter what type of media I import into Motion, the canvas displays a mostly black image with some sparse color pixels...even with the installed templates. If I double click the file, it displays fine in a separate window. If I send out to my client monitor, it looks fine. But my two displays show the same issue only in the canvas portion of the program. Is the new ATI card incompatible? Any thoughts?

    Oh - how about screen calibration software - Color Munki?
    That is for print and not compatible with Motion.
    Patrick

  • Acrobat Reader is not properly displaying dynamic drop down when LiveCycle does

    I have a sample file that loads a drop down menu from an xml file. This form works fine in the preview pane of LiveCycle. I see the values properly populated. When I attempt to load the same file with Acrobat Reader the drop down menu shows up empty. I have saved the document as a Dynamic PDF. This happens with both Reader 8.0 and 7.0 on two different machines. Am I doing something wrong? Is this a known issue?

    How are you merging the data to the form before viewing in Reader? Using the Preview in Designer allows you to pass xml data when rendering the PDF but when you save out a PDF Form from Designer the data is not part of the form. And without Reader extending the form (or using Acrobat Pro) you have no way of pulling in the xml data so that the drop down can populate.

  • XML entities not properly displaying

    I have an XML doc with apostrophies and such and have changed
    them to the proper entity (&apos;) however, regardless of
    whether or not I change them they are always displayed as
    "&apos;" ...anyone know why? When I publish my flash file my
    XML text is displayed as such:
    "The cat&apos;s hat fell off."
    Thanks!
    Ewon

    Hi,
    this is probably because there's only one "end of line" character (probably after <?xml ... ?>). This is normal, but you must store the second line in a string data object, which will then receive the whole XML stream (except the xml header as it is stored in the first line). And that's done.
    BR
    Sandra

  • Adobe Reader X is not properly displaying PDF's even though I have uninstalled and reinstalled the program.

    I recently updated to Firefox 5.0. In April I also updated my Adobe Reader to Version X. Suddenly, pdf's do not open properly; they are fragmented, they "smear", and they do not cover the whole page. I uninstalled all of my Adobe files this morning and reinstalled Reader and Flash Player. I used the Windows Add/Remove feature for uninstalling. I gave up trying to open JPEG's months ago and now only use the Windows fax and picture displayer that. But now I'm having PDF issues. And I download a lot of PDF's.

    Or http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html

  • Dreamweaver 8 not properly displaying php file in display area...

    Hi...
    I have made I new site... www.tresfjording.com
    It's all in Norwegian, but it seems to work fine in MSIE7
    But in my Dreamweaver's design window it's a mess.
    In fact it shows just parts of the page and even that is
    garbled...
    Have installed WampServer to view the PHP pages hoping for a
    miracle, but
    that didn't work at all.
    I am left with my own messy code to edit pages, and frankly
    that's a kind of
    a eternal try and error process for me...
    I need my WYSIWYG back, without getting rid of the two lines
    of PHP in each
    page. Once including the left column data, and the other the
    right column
    data.
    Is there a solution in upgrading to CS3?
    Or is there another closer and cheaper solution?
    Regards
    Zadig Galbaras
    (nick)
    www.tresfjording.com

    Hello,
    Take a look at the source code using the browser.
    There are 3 doc types and numerous <body>,
    </body>, meta tags and additional
    links to stylesheets within the code:
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 //EN">
    <HTML>
    <HEAD>
    <link href="css/granbergMain.css" rel="stylesheet"
    type="text/css">
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
    Transitional//EN"
    http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="
    http://www.w3.org/1999/xhtml">
    <head>
    <link href="css/granbergTopp.css" rel="stylesheet"
    type="text/css" />
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
    Transitional//EN"
    http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="
    http://www.w3.org/1999/xhtml">
    <head>
    <link href="css/granbergSide.css" rel="stylesheet"
    type="text/css" />
    As Alan asked, is the page using includes? It appears to be
    using php
    includes.
    The home page is:
    http://www.tresfjording.com/index.php
    If you just opened the same index.php file in notepad that
    you open in DW,
    you wouldn't see the additional tags and doctypes.
    But if you view the page in IE, and "view source", you'll see
    them. The
    includes are added server side and output to the browser.
    Can you paste the code from one of the include pages?
    Take care,
    Tim
    "Zadig Galbaras" <[email protected]> wrote in
    message
    news:[email protected]...
    > Hi Alan...
    >
    > I loaded the file into Notepad++ and checked but I
    coudn't find the tags
    > you mentioned...
    > To me the <HTML>, <HEAD> and <BODY>
    seems correct.
    > If I remove one of them, the display worsens
    drastically! :-(
    >
    > --
    >
    > Regards
    > Zadig Galbaras
    > (nick)
    > www.tresfjording.com
    > -----
    >
    >
    >
    > "Alan" <[email protected]> skrev i
    melding
    > news:C4047C35.2F29A4%[email protected]...
    >>
    >>
    >>> www.tresfjording.com
    >>
    >> Is the page using includes?
    >>
    >> There's four <body> tags on the page. And four
    head tags. and so on.
    >> Dw's design view stops when it encounters a second
    body tag.
    >>
    >> Strip the included files down to just what is
    correct syntax for where
    >> they
    >> are used in the main page.
    >>
    >> --
    >> Alan
    >> Adobe Community Expert, dreamweaver
    >>
    >>
    http://www.adobe.com/communities/experts/
    >>
    >>
    >>
    >

Maybe you are looking for