Not Properly Insert and Update in ODI interfaces
Dear Brothers,
The records are not inserting and updating even the CDC captured in the journal in one of my package. But, stopped and execute again then there is inserts and updates. I am not able to understand where the problem is. Can u suggest regarding the issue.
Dear Bro,
I am capturing CDC using consistent set. I am using (LKM SQL to DB2 UDB). While executing the package, the records are locked and extend window, but there is no inserts and updates into the database. It is throwing error as row index out of range while running the query. The query is running in Source Stage for ex. RTO_STAGE.JV$NUMGEN. query is triggering but records are not properly inserted and updated in the target.
First time i saw in the CDC table, there was some 10 records available while executing no insert and update. Then, i stopped it and execute it again at that time i checked in the CDC table ie., the same table, but there was only 2 records available in CDC the old records were disappeared.
I dont know the exact issue? My colleague is telling may be SNP tables not refreshing. Kindly suggest any solution.
Similar Messages
-
Can we use both INSERT and UPDATE at the same time in JDBC Receiver
Hi All,
I would like to know is it possible to use both INSERT and UPDATE at the same time in one interface because I have a requirement in which I have to perform both the task.
user send the file which contains both new and old record and I need to save those in MS SQL database.
If the record exist then use UPDATE otherwise use INSERT.
I looked on sdn but didn't find any blog which perform both the things at the same time.
Interface Requirement
FILE -
> PI -
> JDBC(INSERT & UPDATE)
I am thinking to use JDBC Lookup but not sure if it good to use for bulk record.
Can somebody please suggest me something or send me the link of any blog or anything to solve this problem.
Thanks,Hi ,
If I have understood properly the scenario properly,you are not performing insert and update together. As you posted
"If the record exist then use UPDATE otherwise use INSERT."
Thus you are performing either an insert or an update which depends on outcome of a search if the records already exist in database or not. Obviously to search the tables you need " select * from ... where ...." query. If your query returns some results you proceed with update since this means there are some old records already in database. If your query returns no rows you proceed with "insert into tablename....." since there are no old records present in database.
Now perhaps the best method to do the searching, taking a decision to insert or update, and finally insert or update operation is to be done by a stored procedure in MS SQL database. A stored procedure is a subroutine available to applications accessing a relational database system. Here the application is PI server. If you need further help on how to write and call stored procedure in MS SQL you can look into these links
http://www.daniweb.com/web-development/databases/ms-sql/threads/146829
http://www.sqlteam.com/article/stored-procedures-parameters-inserts-and-updates
[ This part you can ignore, Since its not sure that you will face this situation
Still you might face some problems while your scenario runs. Lets consider this scenario, after the stored procedure searches the database it found no rows. Thus you proceed with an insert operation. If your database table is being accessed by multiple applications (or users) other than yours then it is very well possible that after the search operation completed with a null result, an insert/update operation has been performed by some other application with the same primary key. Now when you are trying to insert another row with same primary key you get an error message like "duplicate entry not possible for same primary key value". Thus you need to be careful in this respect. MS SQL has a feature called "exclusive locks ". Look into these links for more details on the subject
http://msdn.microsoft.com/en-us/library/aa213039(v=sql.80).aspx
http://www.mssqlcity.com/Articles/Adm/SQL70Locks.htm
http://www.faqs.org/docs/ppbook/r27479.htm
http://msdn.microsoft.com/en-US/library/ms187373.aspx
http://msdn.microsoft.com/en-US/library/ms173763.aspx
http://msdn.microsoft.com/en-us/library/e7z8d5hf(v=vs.80).aspx
http://mssqlserver.wordpress.com/2006/11/08/locks-in-sql/
http://www.mollerus.net/tom/blog/2008/03/using_mssqls_nolock_for_faster_queries.html
There must be other methods to avoid this problem. But the point is you need to be sure that all access to database for insert/update operations are isolated.
regards
Anupam -
When did Apple turn into piece of ****? It prompted me to update itunes and install icloud. I did. It crashed saying it was not properly installed and reinstall it. Since then I have been trying. I worry if my thousands of dollars worth of music is lost
I had a very similar problem, error 4251. (look in your log you will see that error) Since I finally fixed my problem, I thought I would see if I can help someone else.
What I found is that I lost burn ability in both iTunes AND Windows. Like you did. I did some digging and found that this wasn't hardware related at all. In fact, this boils down to a registry key getting messed up. (sigh) Yeah. It causes the system to get a bad 'handle'.
OK, here's what to try. Go to this Microsoft KB article. Scroll down and find the *manual* instructions for Vista. Delete the registry key that it specifies. Reboot. Now verify that you can burn in Windows. (If you have a RW disc, do a disc erase, or just try and burn from Windows Media Player.) If that is working now, you're on the right track.
Now the issue is that iTunes will still be broken. Go and install the latest Gear driver. (I know you may have done it, but do it again.) Now follow the intructions in this Apple KB article to verify the "GEARAspiWDM" info is back there in the registry. Now reboot. Try and burn in iTunes.
I hope this helps. -
Oracle forms 10g,multiple insert and update problem
Hi,
I have tabular form(4 records displayed) with one datablock(based on a view).
After querying the form could not update all the records but only first record value can select from LOV.
I called a procedure in in-insert and on-update
The query is lik this
PACKAGE BODY MAPPING IS
PROCEDURE INSERT_ROW(EVENT_NAME IN VARCHAR2)
IS
BEGIN
IF (EVENT_NAME = 'ON-INSERT') THEN
INSERT INTO XX_REC_MAPPING
(BRANCH_CODE,COLLECTION_ID,PAY_MODE_ID,RECEIPT_METHOD,CREATED_BY,
CREATION_DATE,LAST_UPDATED_BY,LAST_UPDATE_DATE,LAST_UPDATE_LOGIN)
VALUES
( :XX_REC_MAPPING.OFFICE_CODE,
:XX_REC_MAPPING.COLLECTION_ID,
:XX_REC_MAPPING.PAY_MODE_ID,
:XX_REC_MAPPING.RECEIPT_METHOD,
:XX_REC_MAPPING.CREATED_BY,
:XX_REC_MAPPING.CREATION_DATE,
:XX_REC_MAPPING.LAST_UPDATED_BY,
:XX_REC_MAPPING.LAST_UPDATE_DATE,
:XX_REC_MAPPING.LAST_UPDATE_LOGIN);
ELSIF (EVENT_NAME = 'ON-UPDATE') THEN
UPDATE XX_REC_MAPPING
SET BRANCH_CODE=:XX_REC_MAPPING.OFFICE_CODE,
COLLECTION_ID=:XX_REC_MAPPING.COLLECTION_ID,
PAY_MODE_ID=:XX_REC_MAPPING.PAY_MODE_ID,
RECEIPT_METHOD=:XX_REC_MAPPING.RECEIPT_METHOD,
LAST_UPDATED_BY=:XX_REC_MAPPING.LAST_UPDATED_BY,
LAST_UPDATE_DATE=:XX_REC_MAPPING.LAST_UPDATE_DATE,
LAST_UPDATE_LOGIN=:XX_REC_MAPPING.LAST_UPDATE_LOGIN
WHERE ROWID=:XX_REC_MAPPING.ROW_ID;
END IF;
END INSERT_ROW;
END MAPPING;
Whether the table gets looked or sholud i use some other trigger or loops ?
someone suggest me how to edit this query for multiple update.
Thanks
sat33I called a procedure in in-insert and on-updateWhy are you writing this code in the first place? If you have a block based on an updatable view, just let Forms do the inserts and updates.
If it's not an updatable view, use instead of triggers on the view.
See this current thread too:
INSTEAD of Trigger View for an Oracle EBS New form development -
Inserting and Updating records in ORACLE using WebDynpro Java
Hi All
I got connected to oracle backend (using my previous thread), but now i want to insert and update the records
i have created views for insert and update,
Thanks in advance
SushmaHi shusma..
chk this link..
<b><u>Creating Connection</u></b>
package com.sap.xirig;
import javax.naming.*;
import javax.sql.*;
import java.sql.*;
public class DBLookup {
String Conn_Status = "Not Connected";
String Language_Desc = "Empty";
String Language_Cd = "Empty";
Connection conn;
Context ctx;
DataSource ds;
//Constructor for the DBLookup object
public DBLookup {
try {
ctx = new InitialContext();
if (ctx == null) {
throw new Exception("Boom - No Context");
// If JDBC 2.0 connection is used please create the DataSource object as below
// ds = (DataSource) ctx.lookup("jdbc/ORACLEDATASOURCE");
// If JDBC 1.0 connection is used please create the DataSource object as below
// ds = (DataSource) ctx.lookup("jdbc/notx/ORACLEDATASOURCE");
if (ds == null) {
throw new Exception("Boom - No dataSource");
catch (Exception e) {
e.printStackTrace();
public String getLanguageDesc(String v_str) {
Statement stmt = null;
ResultSet rst = null;
try {
if (ds != null) {
conn = ds.getConnection();
Conn_Status = "Could not get connection to
datasource";
if (conn != null) {
Conn_Status = "Got Connection " +
conn.toString();
stmt = conn.createStatement();
rst = stmt.executeQuery("SELECT
LANGUAGE_DESC FROM LANGUAGETRANSLATION WHERE LANGUAGE_CD='" + v_str +
if (rst.next()) {
Language_Desc = rst.getString(1);
conn.close();
catch (Exception e) {
e.printStackTrace();
finally {
if (rst != null) {
try {
rst.close();
catch (Exception e) {
e.printStackTrace();
if (stmt != null) {
try {
stmt.close();
catch (Exception e) {
e.printStackTrace();
if (conn != null) {
try {
conn.close();
catch (Exception e) {
e.printStackTrace();
return Language_Desc;
http://e-docs.bea.com/wls/docs81/oracle/API_joci.html
Hope this will help u..
URs GS -
ORA-01456 : may not perform insert/delete/update operation
When I use following stored procedure with crystal reports, following error occurs.
ORA-01456 : may not perform insert/delete/update operation inside a READ ONLY transaction
Kindly help me on this, please.
My stored procedure is as under:-
create or replace
PROCEDURE PROC_FIFO
(CV IN OUT TB_DATA.CV_TYPE,FDATE1 DATE, FDATE2 DATE,
MSHOLD_CODE IN NUMBER,SHARE_ACCNO IN VARCHAR)
IS
--DECLARE VARIABLES
V_QTY NUMBER(10):=0;
V_RATE NUMBER(10,2):=0;
V_AMOUNT NUMBER(12,2):=0;
V_DATE DATE:=NULL;
--DECLARE CURSORS
CURSOR P1 IS
SELECT *
FROM FIFO
WHERE SHARE_TYPE IN ('P','B','R')
ORDER BY VOUCHER_DATE,
CASE WHEN SHARE_TYPE='P' THEN 1
ELSE
CASE WHEN SHARE_TYPE='R' THEN 2
ELSE
CASE WHEN SHARE_TYPE='B' THEN 3
END
END
END,
TRANS_NO;
RECP P1%ROWTYPE;
CURSOR S1 IS
SELECT * FROM FIFO
WHERE SHARE_TYPE='S'
AND TRANS_COST IS NULL
ORDER BY VOUCHER_DATE,TRANS_NO;
RECS S1%ROWTYPE;
--BEGIN QUERIES
BEGIN
DELETE FROM FIFO;
--OPENING BALANCES
INSERT INTO FIFO
VOUCHER_NO,VOUCHER_TYPE,VOUCHER_DATE,TRANS_QTY,TRANS_AMT,TRANS_RATE,
SHOLD_CODE,SHARE_TYPE,ACC_NO,SHARE_CODE,TRANS_NO)
SELECT TO_CHAR(FDATE1,'YYYYMM')||'001' VOUCHER_NO,'OP' VOUCHER_TYPE,
FDATE1-1 VOUCHER_DATE,
SUM(
CASE WHEN
--((SHARE_TYPE ='S' AND DTAG='Y')
SHARE_TYPE IN ('P','B','R','S') THEN
TRANS_QTY
ELSE
0
END
) TRANS_QTY,
SUM(TRANS_AMT),
NVL(CASE WHEN SUM(TRANS_AMT)<>0
AND
SUM
CASE WHEN SHARE_TYPE IN ('P','B','R','S') THEN
TRANS_QTY
ELSE
0
END
)<>0 THEN
SUM(TRANS_AMT)/
SUM
CASE WHEN SHARE_TYPE IN ('P','B','R','S') THEN
TRANS_QTY
ELSE
0
END
) END,0) TRANS_RATE,
MSHOLD_CODE SHOLD_CODE,'P' SHARE_TYPE,SHARE_ACCNO ACC_NO,
SHARE_CODE,0 TRANS_NO
FROM TRANS
WHERE ACC_NO=SHARE_ACCNO
AND SHOLD_CODE= MSHOLD_CODE
AND VOUCHER_DATE<FDATE1
--AND
--(SHARE_TYPE='S' AND DTAG='Y')
--OR SHARE_TYPE IN ('P','R','B'))
group by TO_CHAR(FDATE1,'YYYYMM')||'001', MSHOLD_CODE,SHARE_ACCNO, SHARE_CODE;
COMMIT;
--TRANSACTIONS BETWEEND DATES
INSERT INTO FIFO
TRANS_NO,VOUCHER_NO,VOUCHER_TYPE,
VOUCHER_DATE,TRANS_QTY,
TRANS_RATE,TRANS_AMT,SHOLD_CODE,SHARE_CODE,ACC_NO,
DTAG,TRANS_COST,SHARE_TYPE
SELECT TRANS_NO,VOUCHER_NO,VOUCHER_TYPE,
VOUCHER_DATE,TRANS_QTY,
CASE WHEN SHARE_TYPE='S' THEN
NVL(TRANS_RATE-COMM_PER_SHARE,0)
ELSE
NVL(TRANS_RATE+COMM_PER_SHARE,0)
END
,TRANS_AMT,SHOLD_CODE,SHARE_CODE,ACC_NO,
DTAG,NULL TRANS_COST,SHARE_TYPE
FROM TRANS
WHERE ACC_NO=SHARE_ACCNO
AND SHOLD_CODE= MSHOLD_CODE
AND VOUCHER_DATE BETWEEN FDATE1 AND FDATE2
AND
((SHARE_TYPE='S' AND DTAG='Y')
OR SHARE_TYPE IN ('P','R','B'));
COMMIT;
--PURCHASE CURSOR
IF P1%ISOPEN THEN
CLOSE P1;
END IF;
OPEN P1;
LOOP
FETCH P1 INTO RECP;
V_QTY:=RECP.TRANS_QTY;
V_RATE:=RECP.TRANS_RATE;
V_DATE:=RECP.VOUCHER_DATE;
dbms_output.put_line('V_RATE OPENING:'||V_RATE);
dbms_output.put_line('OP.QTY2:'||V_QTY);
EXIT WHEN P1%NOTFOUND;
--SALES CURSOR
IF S1%ISOPEN THEN
CLOSE S1;
END IF;
OPEN S1;
LOOP
FETCH S1 INTO RECS;
EXIT WHEN S1%NOTFOUND;
dbms_output.put_line('OP.QTY:'||V_QTY);
dbms_output.put_line('SOLD:'||RECS.TRANS_QTY);
dbms_output.put_line('TRANS_NO:'||RECS.TRANS_NO);
dbms_output.put_line('TRANS_NO:'||RECS.TRANS_NO);
IF ABS(RECS.TRANS_QTY)<=V_QTY
AND V_QTY<>0
AND RECS.TRANS_COST IS NULL THEN
--IF RECS.TRANS_COST IS NULL THEN
--dbms_output.put_line('SOLD:'||RECS.TRANS_QTY);
--dbms_output.put_line('BAL1:'||V_QTY);
UPDATE FIFO
SET TRANS_COST=V_RATE,
PUR_DATE=V_DATE
WHERE TRANS_NO=RECS.TRANS_NO
AND TRANS_COST IS NULL;
COMMIT;
dbms_output.put_line('UPDATE TRANS_NO:'||RECS.TRANS_NO);
dbms_output.put_line('OP.QTY:'||V_QTY);
dbms_output.put_line('SOLD:'||RECS.TRANS_QTY);
dbms_output.put_line('TRANS_NO:'||RECS.TRANS_NO);
dbms_output.put_line('BAL2:'||TO_CHAR(RECS.TRANS_QTY+V_QTY));
END IF;
IF ABS(RECS.TRANS_QTY)>ABS(V_QTY)
AND V_QTY<>0 AND RECS.TRANS_COST IS NULL THEN
UPDATE FIFO
SET
TRANS_QTY=-V_QTY,
TRANS_COST=V_RATE,
TRANS_AMT=ROUND(V_QTY*V_RATE,2),
PUR_DATE=V_DATE
WHERE TRANS_NO=RECS.TRANS_NO;
--AND TRANS_COST IS NULL;
COMMIT;
dbms_output.put_line('UPDATING 100000:'||TO_CHAR(V_QTY));
dbms_output.put_line('UPDATING 100000 TRANS_NO:'||TO_CHAR(RECS.TRANS_NO));
INSERT INTO FIFO
TRANS_NO,VOUCHER_NO,VOUCHER_TYPE,
VOUCHER_DATE,TRANS_QTY,
TRANS_RATE,TRANS_AMT,SHOLD_CODE,SHARE_CODE,ACC_NO,
DTAG,TRANS_COST,SHARE_TYPE,PUR_DATE
VALUES
MCL.NEXTVAL,RECS.VOUCHER_NO,RECS.VOUCHER_TYPE,
RECS.VOUCHER_DATE,RECS.TRANS_QTY+V_QTY,
RECS.TRANS_RATE,(RECS.TRANS_QTY+V_QTY)*RECS.TRANS_RATE,RECS.SHOLD_CODE,
RECS.SHARE_CODE,RECS.ACC_NO,
RECS.DTAG,NULL,'S',V_DATE
dbms_output.put_line('INSERTED RECS.QTY:'||TO_CHAR(RECS.TRANS_QTY));
dbms_output.put_line('INSERTED QTY:'||TO_CHAR(RECS.TRANS_QTY+V_QTY));
dbms_output.put_line('INSERTED V_QTY:'||TO_CHAR(V_QTY));
dbms_output.put_line('INSERTED RATE:'||TO_CHAR(V_RATE));
COMMIT;
V_QTY:=0;
V_RATE:=0;
EXIT;
END IF;
IF V_QTY>0 THEN
V_QTY:=V_QTY+RECS.TRANS_QTY;
ELSE
V_QTY:=0;
V_RATE:=0;
EXIT;
END IF;
--dbms_output.put_line('BAL3:'||V_QTY);
END LOOP;
V_QTY:=0;
V_RATE:=0;
END LOOP;
CLOSE S1;
CLOSE P1;
OPEN CV FOR
SELECT TRANS_NO,VOUCHER_NO,VOUCHER_TYPE,
VOUCHER_DATE,TRANS_QTY,
TRANS_RATE,TRANS_AMT,SHOLD_CODE,B.SHARE_CODE,B.ACC_NO,
DTAG,TRANS_COST,SHARE_TYPE, B.SHARE_NAME,A.PUR_DATE
FROM FIFO A, SHARES B
WHERE A.SHARE_CODE=B.SHARE_CODE
--AND A.SHARE_TYPE IS NOT NULL
ORDER BY VOUCHER_DATE,SHARE_TYPE,TRANS_NO;
END PROC_FIFO;
Thanks and Regards,
LuqmanCopy from TODOEXPERTOS.COM
Problem Description
When running a RAM build you get the following error as seen in the RAM build
log file:
14:52:50 2> Updating warehouse tables with build information...
Process Terminated In Error:
[Oracle][ODBC][Ora]ORA-01456: may not perform insert/delete/update operation inside a READ ONLY transaction
(SIGENG02) ([Oracle][ODBC][Ora]ORA-01456: may not perform insert/delete/update operation inside a READ ONLY transaction
) Please contact the administrator of your Oracle Express Server application.
Solution Description
Here are the following suggestions to try out:
1. You may want to use oci instead of odbc for your RAM build, provided you
are running an Oracle database. This is setup through the RAA (relational access
administrator) maintenance procedure.
Also make sure your tnsnames.ora file is setup correctly in either net80/admin
or network/admin directory, to point to the correct instance of Oracle.
2. Commit or rollback the current transaction, then retry running your
RAM build. Seems like one or more of your lookup or fact tables have a
read-only lock on them. This occurs if you modify or add some records to your
lookup or fact tables but forget to issue a commit or rollback. You need to do
this through SQL+.
3. You may need to check what permissions has been given to the relational user.
The error could be a permissions issue.
You must give 'connect' permission or roll to the RAM/relational user. You may
also try giving 'dba' and 'resource' priviliges/roll to this user as a test. Inorder to
keep it simple, make sure all your lookup, fact and wh_ tables are created on
a single new tablespace. Create a new user with the above privileges as the
owner of the tablespace, as well as the owner of the lookup, fact and wh_
tables, inorder to see if this is a permissions issue.
In this particular case, the problem was resolved by using oci instead of odbc,
as explained in suggestion# 1. -
Multiple rows insert and update form example
I just want to share with you an example of a multiple rows insert and update form. You can access it HERE (http://tryapexnow.com/apex/f?p=12090:21)
You will find on the same page the complete description of all elements used to buid it.
I'm waiting for opinions, suggestions, and questions here in this thread.
ThanksHello Valentin,
I got an error message when I clicked on the weblink. Here is the message
Error ERR-7620 Could not determine workspace for application. Could you please take a look at this.
Thanks,
Karol -
Execution results (Merged instead of inserted and updated)
I am doing UPDATE/INSERT on the target table. But in the execution results it just gives the rows inserted or updated combined in the merged column.
Is there a way to get inserted and updated in appropriate columns.I have not tried this recently - but I know the MERGE statement wasn't introduced until Oracle 9i. If you CONFIGURE the oracle module the map is in, and change the PL/SQL generation mode from "Default" to "Oracle 8i", I think it'll change the SQL to use INSERTS and UPDATES instead of the MERGE, which should give you what you want.
Warning though - this will change EVERY map in that module, and recompile using less efficient SQL. You might create a module just for the one map and set the generation mode for it, so that all the maps won't become less efficient.
Then again, the easier way is probably to simply have both an UPDATE_DATE and CREATE_DATE on your target table...if they are the same it was an INSERT, if different it was an UPDATE.
Hope this helps,
Scott -
Count of inserted and updated rowcount in @@rowcount
Similarly I have created a sp which is inserting and updating the records.
Now I want to track the count of new record inserted and updated record in @@rowcount .
please suggest me the code .
below is my sp
alter Procedure SP_Archive_using_merge
AS
--exec SP_Archive
BEGIN
SET NOCOUNT ON
Declare @Source_RowCount int
Declare @New_RowCount int
DECLARE @TimeIn SMALLDATETIME
DECLARE @LatestVersion INT
SET NOCOUNT ON
---BBxKey and Hash value of all the source columns are derived in source query itself--
select @TimeIn=getdate(),@LatestVersion=1
MERGE Archive.dbo.ArchiveBBxCemxr AS stm
USING (
SELECT a.*,cast(SUBSTRING(a.Col001,1,10) as varchar(100)) BBxKey,
HashBytes('MD5', CAST(CHECKSUM(a.Col001,a.Col002,a.Col003,a.Col004,a.Col005,a.Col006,a.Col007) AS varbinary(max))) RowChecksum,
b.BBxKey as Archive_BBxKey, b.RowChecksum as Archive_RowChecksum
FROM dbo.ImportBBxCemxr a LEFT OUTER JOIN Archive.dbo.ArchiveBBxCemxr b
ON a.Col001 = b.BBxKey
Where (b.LatestVersion = 1 OR b.LatestVersion IS NULL) AND a.Col001 IS NOT NULL
) AS sd
ON sd.Archive_BBxKey = stm.BBxKey and sd.RowChecksum = stm.RowChecksum
WHEN MATCHED AND (stm.BBxKey = sd.Archive_BBxKey and stm.RowChecksum != sd.Archive_RowChecksum) THEN
UPDATE SET
stm.TimeIn = @TimeIn,
BBXKey=sd.BBXKey,
RowChecksum=sd.RowChecksum,
stm.Col001=sd.Col001,
stm.Col002=sd.Col002,
stm.Col003=sd.Col003,
stm.Col004=sd.Col004,
stm.Col005=sd.Col005,
stm.Col006=sd.Col006,
stm.Col007=sd.Col007,
stm.LatestVersion=@LatestVersion
WHEN NOT MATCHED and (sd.Archive_BBxKey is null) THEN
Insert (TimeIn,BBXKey,RowChecksum,Col001,Col002,Col003,Col004,Col005,Col006,Col007,LatestVersion)
values(getdate(),sd.BBXKey,sd.RowChecksum,sd.Col001,sd.Col002,sd.Col003,sd.Col004,sd.Col005,sd.Col006,sd.Col007,@LatestVersion);
end
Thankx & regards, Vipin jha MCPYou need to OUTPUT clause with action column to get the info into teable variable and then count from the table variable.
Try the below: (Not tested)
alter Procedure SP_Archive_using_merge
AS
--exec SP_Archive
BEGIN
SET NOCOUNT ON
Declare @Source_RowCount int
Declare @New_RowCount int
DECLARE @TimeIn SMALLDATETIME
DECLARE @LatestVersion INT
SET NOCOUNT ON
---BBxKey and Hash value of all the source columns are derived in source query itself--
select @TimeIn=getdate(),@LatestVersion=1
DECLARE @tableVariable TABLE (sAction VARCHAR(20), InsertedID INT, DeletedID INT)
MERGE Archive.dbo.ArchiveBBxCemxr AS stm
USING (
SELECT a.*,cast(SUBSTRING(a.Col001,1,10) as varchar(100)) BBxKey,
HashBytes('MD5', CAST(CHECKSUM(a.Col001,a.Col002,a.Col003,a.Col004,a.Col005,a.Col006,a.Col007) AS varbinary(max))) RowChecksum,
b.BBxKey as Archive_BBxKey, b.RowChecksum as Archive_RowChecksum
FROM dbo.ImportBBxCemxr a LEFT OUTER JOIN Archive.dbo.ArchiveBBxCemxr b
ON a.Col001 = b.BBxKey
Where (b.LatestVersion = 1 OR b.LatestVersion IS NULL) AND a.Col001 IS NOT NULL
) AS sd
ON sd.Archive_BBxKey = stm.BBxKey and sd.RowChecksum = stm.RowChecksum
WHEN MATCHED AND (stm.BBxKey = sd.Archive_BBxKey and stm.RowChecksum != sd.Archive_RowChecksum) THEN
UPDATE SET
stm.TimeIn = @TimeIn,
BBXKey=sd.BBXKey,
RowChecksum=sd.RowChecksum,
stm.Col001=sd.Col001,
stm.Col002=sd.Col002,
stm.Col003=sd.Col003,
stm.Col004=sd.Col004,
stm.Col005=sd.Col005,
stm.Col006=sd.Col006,
stm.Col007=sd.Col007,
stm.LatestVersion=@LatestVersion
WHEN NOT MATCHED and (sd.Archive_BBxKey is null) THEN
Insert (TimeIn,BBXKey,RowChecksum,Col001,Col002,Col003,Col004,Col005,Col006,Col007,LatestVersion)
values(getdate(),sd.BBXKey,sd.RowChecksum,sd.Col001,sd.Col002,sd.Col003,sd.Col004,sd.Col005,sd.Col006,sd.Col007,@LatestVersion)
OUTPUT $action as action, inserted.BBXKey as ins, deleted.BBXKey as del into @tableVariable;
--To get the action count info
SELECT sAction, COUNT(*) FROM @tableVariable GROUP BY sAction
end -
In jdbc adapter what is the difference between insert and update insert
in jdbc adapter what is the difference between insert and update insert
Edited by: katru vijay on Mar 22, 2010 7:43 AMPlease refer to this Link [Document Formats for the Receiver JDBC Adapter|http://help.sap.com/saphelp_nw04/Helpdata/EN/22/b4d13b633f7748b4d34f3191529946/frameset.htm]
Hope this helps.
Regards,
Chandravadan -
Hi All;
I want to find out all inserts and updates of a spesific table. For instance a package l,ke that
CREATE OR REPLACE PACKAGE BODY param_test IS
PROCEDURE ins_test IS
BEGIN
insert INTO parameter_value VALUES (2);
INSERT INTO parameter_value VALUES (9);
INSERT INTO
parameter_value VALUES (4);
insert INTO parameter_value VALUES (54);
END ins_test;
END param_test;I am querying user_source view. My query is below.
Connected to Oracle Database 10g Enterprise Edition Release 10.2.0.1.0
Connected as SYS
SQL> SELECT us1.NAME, us1.line, us1.text
2 FROM user_source us1,
3 (SELECT us2.line, us2.NAME, us2.text
4 FROM user_source us2
5 WHERE regexp_like(upper(us2.text), '[[:space:]]*PARAMETER_VALUE[[:space:]]*')) us3
6 WHERE us3.line - 1 = us1.line
7 AND us1.NAME = us3.NAME
8 AND regexp_like(upper(us1.text), '[[:space:]]*(INSERT[[:space:]]*INTO|UPDATE)[[:space:]]*')
9 /
NAME LINE TEXT
PARAM_TEST 9 insert INTO parameter_value VALUES (2);
PARAM_TEST 12 INSERT INTO
SQL> My question is "Are tehre any solutions to overcome this situation?"
Kindly Regards...You might be better off combining into your attack the use of user_dependencies. This will tell you what objects e.g., code is dependent on your table and then you can search the source of those modules for inserts and updates into the table. Even then you'll never be sure, especially if dynamic SQL is used as the statement may be pieced together from various bits if strings, as then user_dependencies won't contain the reference.
-
Connecting to datasource and retrieve, insert and update data in SQL Server
hi,
i am trying to retrieve, insert and update data from SQL Server 2000 and display in JSPDynPage and is for Portal Application. I have already created datasource in visual composer. Is there any sample codes for mi to use it as reference???
Thanks
Regards,
shixuanHi,
See this link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6209b52e-0401-0010-6a9f-d40ec3a09424
Regards,
Senthil kumar K. -
Connecting to datasource and retrieve, insert and update data
hi,
i am doing a JSP page that need to retrieve data and display on textView, insert data and update data. I have already create a datasource in Visual Composer. Does anyone have a sample codes for mi to use it as reference. So that i can connect to the datasource tat i created in Visual composer and retrieve, insert and update data. thanz
Regards,
shixuanHi,
After creating a data source in Visual composer .
you have to create a BI system that Visual Composer can use in
the SAP NetWeaver Portal.
refer this pdf file for further Info
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6209b52e-0401-0010-6a9f-d40ec3a09424
Regards,
Beevin -
"reproc: Insert and Update failed on" replicated table
Hello, I've published a new publication item on an Oracle Lite Server (9i and mobile server 5.0.2.10).
After inserting records on the server replicated table (Table1), when I try to sync some devices, I have the following error message on the client PDA "reproc Insert and Update failed on " Table1.
If I empty the server table's records, then the client PDA syncs OK.
Can someone refresh me with the cause of this error ?
Thank's in advance.
Regards,
OlivierHi,
This is my actual requirement.
During the updates i.e update process and delete process, if the filed status is changed to 'O', '0' or ' ' in SAP, then those records in Oracle should be deleted.
if the field status is changed to other than 'O', '0', or ' ' SAP, then those records needs to be updated with the remaining information
How do XI Know that these fields are changed in the SAP table to perform delete ,is some notification required when there is change in SAP Table through proxy ? -
Why does my ipad not detected on my lap or I can not sync itunes and updated IOS 7.1.2 this
The following may help:
Windows computer: iOS: Device not recognized in iTunes for Windows
Mac computer: iOS: Device not recognized in iTunes for OS X
Maybe you are looking for
-
Adding memory of different sizes
I have a Mac Pro 8 core running with two 1GB memory sticks. I'd like to add additional memory. I'm looking at adding 4x2GB memory sticks. Is there any reason why I couldn't install the 2GB sticks and leave the 1GB sticks in the system for a total of
-
Hi, My scenario is PROXY->XI->AS2 At receiver side I need to use HTTPS for secure connection. I got two field called:-- 1) server Certificate(keystore) 2) private key for client authenticationI have got certificate name( let say "xyz-root"). It is
-
An upgrade shopping list. One thing needed before surgery can commence.
Hi, I'm about to open the digital version of Pandora's box! I jest of course (well, sort of)... Seriously, I have great expectations for the successful upgrade of the "non-user replaceable" RAM for my G4 flat panel 800 to it's 1 GB limit. In reading
-
I am trying to Print MS Word documents from DMS when like a Production Order is released. It is understood that Adobe Service is required for Adobe file printing to accomplish this, however, is there a method to Print Microsoft documents in Backgrou
-
Non-static method help..
Hello.. I am new to Java and trying to create a Binary Tree, however I have encountered an error "non-static methos cannot be referenced from static context?" and I am unsure how to correct it.. I have C++ background and am unfamiliar with this type