Not Publishing "Work in Progress" Files

Hi,
My project contains many "Work in Progress" files that I do not want to publish. I have tagged them with the relevant WIP tag.
I have also defined a default page to display in the publishing wizard. Is this the page that is displayed when the page cannot be found? For some reason, this page is not being displayed. Instead I am getting the very unattractive "page cannot be displayed."
Thanks very much,
DGR

Assuming you did add that tag to your build expression, is it possible that on some occasion they were published before that tag was applied? Publishing does not delete files from the server, you have to do that manually.
The default topic is not what users see when a page is not found. It is the topic that is opened when the help is opened.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Similar Messages

Flash CC does not publish swf and html files

I'm having issues with Flash CC. When I go to publish my movie the status bar appeaers then quickly disappears and the html and swf files are not created. I'm also not able to export the movie as a quicktime or AVI file. Is there specific settings I must have to publish and export? Note: I am working with AS3 and tried to do a simpple test with a box moving left to right and I have the same problem.
Any help is appreciated. Thanks!

Are you sure the HTML and SWF are not currently in use? For example if you publish and preview it in a browser, it can lock those files because they're "in use". Then Flash cannot overwrite them. You'd need to close the browser or any Flash Players displaying them. If that still won't overwrite, delete the files and see if they're re-created.
If no files are being created at all, gointo publish settings and set a path to export the SWF and HTML file to, don't leaving it at the default (same folder as FLA). Try various places in fact to test permissions.
If you're on Windows you could try running Flash CC as Administrator to also get around any file writing permission issues. Right-click on the Flash icon and select Run as Administrator.
I've only really encountered this when my SWF/HTML was in use or stuck in a process.

Contribute CS3 will not publish Flash Player

A few months ago the company I work for bought Contribute CS3
to edit our website. The homepage of our website contains a Flash
Player file. When I edit and publish this homepage Contribute will
not publish the Flash Player file this section just shows up blank
stating movie not loaded when I bring up our website. The same
thing happens even when I do a 'send for review' before I actually
publish the page. I have administrator rights through Contribute to
edit this website therefore I am confused as to why Contribute will
not publish this Flash Player file. I have also tired to reinsert
the Flash file while editing in Contribute and still the file will
not publish. Would anyone know why this would happen?
Thanks!

Is this occurring with other Web CS applications or only with
Contribute CS3? For general troubleshooting of Web CS products
please go here
http://www.adobe.com/go/kb401401
If this does not address your issue, submit an incident
request via the product support page
http://www.adobe.com/support/contact/

Using Adobe Presenter 7 when published to PDF video files do not play just a blank page, any ideas?

Using Adobe Presenter 7 when published to PDF video files do not just a blank page, any ideas? I am using office 2010 and Adobe Acrobat 9 on my PC any suggestions would be very helpful as the audio and slides work fine though no SWF files work just a blank white screen
Thanks

The problem seems to be with Acrobat 9. Can you share any such pdf generated from presenter at [email protected]
Alternatively, you can try to download Adobe Reader 10 http://get.adobe.com/reader/?promoid=JZEFU and try to view the published output usingthe same.

GIF files not published

Hi, I have just imported a project from RoboHelp 5 into ROBOHelp 8. The project upgraded fine. When I publish to Robo8server my *.gif images are not published, jpgs work fine. Thank you in advance
Rich

Things to check:
1. Are the images in the output files if opened locally?
2. Are the images on the server?
3. What is the path to the images?
Post back and we'll go from there.
Read the RoboColum(n) for mutterings on RoboHelp, Technical Communication Suite and technical communication.

Flash file will not publish SWF

I am a novice when it comes to flash so please bare with me on this one.
I have recently taken over a project started by another person who has been let go due to lack of performance and other issues.
He has created a FLA file and an .exe file. But I am have been asked to place the movie on to the internet.
The FLA file that I have will not let me publish an SWF file to be uploaded to the internet, in fact it will not let me publish anything.
I have changed the publish setting but when I go to publish it the SWF file is not created.
I just want this file in SWF format and for it to autoplay when the website is loaded.
Let me know what I am doing wrong.
Thanks for your Help in advanced
Travis
Extra Information:
I have used a exe to swf converter to convert the EXE file that was already made into a SWF file for the internet.
This does make an swf file but the file is not editable and will not autoplay once it is uploaded.

Any suggestions here? I am having the same problem (minus the part about .exe's):
http://forums.adobe.com/thread/465031?tstart=0
Double checked my publish settings, the path is correct. I have tried exporting a movie to my Desktop, does not work. Tried copying content to a new file, same problem. When I publish, the dialog shows up and a SWF even shows up for a second in the Finder, but then disappears.
I really need to work with this file. I have submitted a support ticket to Adobe, and am awaiting their reply (not holding my breath). Please HELP!

Crystal Report not works in JAR File

I'm using Eclipse All in one, which includes Crystal Reports.. I Connected my Java program with Crystal Reports and its working properly. Now my problem is that the Report is not working in JAR files.. It throws some exception as
"com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: com.businessobjects
com.businessobjects.reports.sdk.JRCCommunicationAdapter---- Error code:-2147215357 Error code name:internal"
Whats the Error.. I don't know. I think that i may missed some CLASSPATH Files. The included CLASSPATH Files are:
ReportViewer.jar
jrcerom.jar
Concurrent.jar
CrystalCharting.jar
CrystalCommon.jar
CrystalContentModels.jar
CrystalExporters.jar
CrystalExportingBase.jar
CrystalFormulas.jar
CrystalQueryEngine.jar
CrystalReportEngine.jar
CrystalReportingCommon.jar
icu4j.jar
keycodeDecoder.jar
log4j.jar
MetafileRenderer.jar
rasapp.jar
rascore.jar
rpoifs.jar
Serialization.jar
URIUtil.jar
xercesImpl.jar
xml-apis.jar
and the mysql-connector jar file
Anybody help me please...

Unable to load database connector
'com.crystaldecisions.reports.queryengine..driverImpl.
DriverLoader
now you have any idea.. pleaseIs that a typo where you have two periods below?
queryengine..driverImplOther than that I don't think anybody here can help you with that. If your classpath includes all necessary JAR files and you are able to access all your resources from within your application JAR file, then I imagine there is a problem with the third-party crystal decisions JAR file or how you are attempting to use it.
My advice to you is to try and contact support with the vendor or provider of this API or possibly try posting on a support forum on their website to see if somebody can help you there.

XML Publisher question - Not generating a valid XML file

I am working through an Oracle document that walks you through creating an XML Pub report. I am using HCM 8.9, Tools 8.49.15 and it has XML Pub installed and I have the Microsoft plug-in installed
I have created a query and have downloaded an rtf template and now am on a page where you enter your data source and then click ‘Generate’ for the sample data file. I did it and it created ‘PERSONAL_DATA_PAY.XML’ which is created from a PS Query. However if I click on ‘PERSONAL_DATA_PAY.XML’ it generates a blocky text file that is not an XML file and I can’t go any further.
Do you know why it’s not generating a valid XML file when I click on 'generate'?
Thanks
Allen H. Cunningham
Data Base Administrator - Oracle/PeopleSoft
Sonoma State University

You mean to say that you create a new data source by specifying Data Source Type as 'PS Query' and Data Source ID as your query name, you are not able to generate a valid XML file (by clicking on Generate link).
did you cross check your query by running it?
On field change of Generate link, PeopleSoft uses PSXP_RPTDEFNMANAGER and PSXP_XMLGEN app packagaes and query objects to create the file
It should work if you query is valid..

XML Publisher does not create a valid XML file when I try to 'generate '

I am working through an Oracle document that walks you through creating an XML Pub report. I am using HCM 8.9, Tools 8.49.15 and it has XML Pub installed and I have the Microsoft plug-in installed
I have created a query and have downloaded an rtf template and now am on a page where you enter your data source and then click ‘Generate’ for the sample data file. I did it and it created ‘PERSONAL_DATA_PAY.XML’ which is created from a PS Query. However if I click on ‘PERSONAL_DATA_PAY.XML’ it generates a blocky text file that is not an XML file and I can’t go any further.
Do you know why it’s not generating a valid XML file when I click on 'generate'?
Thanks
Allen H. Cunningham
Data Base Administrator - Oracle/PeopleSoft
Sonoma State University

On the right click on HD under video quality to filter it.

Cannot open Pages documents that I've worked on. I open a new document, work on it, then save and close it. When I try to open the document again, I get the following message: The document "[name]" could not be opened. The file isn't in the correct form

I cannot open Pages documents that I have worked on and saved. When I try to reopen Pages documents that I've saved, I get the following
message:
"The document “[name of document]” could not be opened. The file isn’t in the correct format.
The file might be corrupted, truncated, or in an unexpected format."
I have downloaded the latest update to iWork, but that doesn't help.
I use Mac OSX 10.6.7
I am using Pages '09 version 4.0.5 (852)
If anyone can help, I would greatly appreciate it.
Best regards,
New York Mac User

A few general trouble shooting tips that may apply here:
1. If you used Software Update to do the OS update(s) to reach 10.6.7, go to http://support.apple.com/downloads/ and download and apply the Mac OS v10.6.7 Combo Updater. The Combo Updater contains some fixes that were not included in the incremental updaters used by Software Update.
1a. Check that you have the current version of Pages (and of the other iWork applications) installed. All three applications' current version numbers end in .0.5
2. A common cause of malfunctioning applications is a corrupted preferences file (.plist file). Your Pages '09's plist is at yourname > Library > Preferences > com.apple.iWork.pages.plist
Quit Pages, locate the file and Drag it to the Desktop (or to the Trash).
Restart Pages and attempt to open one of the files.
If all is well, Trash the plist file and empty the Trash.
If there's no change, AND you've made changes to the Preferences that you wish to keep, drag the file back to its previous location, replacing any new one that has been created.
Regards,
Barry

Crystal Report not working in JAR File

I am using Eclipse All in one, which includes the Crystal Report... I Finished every thing and the Crystal Report is working in Eclipse.. But its not working in JAR files.. Anybody suggest me WHICH FILES SHOULD BE SET AS CLASSPATHS FOR CREATING THIS JAR FILE...
Thanks in advance

Unable to load database connector
'com.crystaldecisions.reports.queryengine..driverImpl.
DriverLoader
now you have any idea.. pleaseIs that a typo where you have two periods below?
queryengine..driverImplOther than that I don't think anybody here can help you with that. If your classpath includes all necessary JAR files and you are able to access all your resources from within your application JAR file, then I imagine there is a problem with the third-party crystal decisions JAR file or how you are attempting to use it.
My advice to you is to try and contact support with the vendor or provider of this API or possibly try posting on a support forum on their website to see if somebody can help you there.

I have an iphone 6 plus which show iphone disable connect to itunes. i tried to restore but it won't work and everytime it says "Iphone "Iphone" could not be restored because firmware file is corrupted disconnect and try again later"

last night while i was sleeping at somone has tried to open my passcode if Iphone 6 plus model A1524. Now i cannot see the passcode screen and it just saysi phone is disable connect to itunes . Then i decided to restore my iphone and i have download almost 4 firmware files (iPhone7,1_8.3_12F70_Restore.ipsw and iPhone7,1_8.0_12A366_Restore.ipsw and iPhone7,1_8.0.1_12A402_Restore.ipsw and fourth one is iPhone7,1_8.2_12D508_Restore.ipsw.part) and restore (by holding shift in itunes and selecting file ) using itunes ( which is current version 12.1.2.27 64 bit) but for everytime two of them(while extracting ) which are (iPhone7,1_8.3_12F70_Restore.ipsw and iPhone7,1_8.2_12D508_Restore.ipsw.part) it says "Iphone "Iphone" could not be restored becuse firmware file was corrupted please disconnect and try again later" .i have tried to download "iPhone7,1_8.3_12F70_Restore.ipsw " manually and via itunes (when i download and restore using itunes it says
"There was a problem downloading the software for the iPhone ''iPhone'' A unknown error occured (9006).
Make sure your networks settings are correct and your network connection is active, or try again.''
but nothing works (While for rest of two it says firmware file is not compatible).. I'm tired of these now as i'm working on this problem for 5 days ...
Please help me as soon as possible..
sorry for my poor english..

Hello JD_NINJA,
Thanks for using Apple Support Communities.
Error 9006 when restoring your iOS device indicates that there is security software on your computer which is preventing connection to the Apple server or your device. To troubleshoot this issue please follow the directions below.
Check your security software
Related errors: 2, 4, 6, 9, 1611, 9006. Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
Get help with iOS update and restore errors - Apple Support
When restoring your iPhone, please make sure to follow the directions in the link below to properly restore.
Restore your device from an iCloud or iTunes backup - Apple Support
Take care,
Alex H.

How do I get my videos to upload from my sony handy cam when I get the message The following file could not be imported. The file is in an unrecognized format. I am using a macbook pro version 10.9.3, I have 411 gb free space, it worked before I updated

How do I get my videos to upload from my sony handy cam when I get the message The following file could not be imported. The file is in an unrecognized format. I am using a macbook pro version 10.9.3, I have 411 gb free space, it worked before I downloaded the latest update for iphoto.

You may be able to download and install the update from here: Digital Camera RAW Compatibility 6.01
If I upgrade to Yosemite will I be forced to go to the new Photos program
No. After upgrading (and of course make a back up first) you will need to update iPhoto to v9.6.1 (you won't be able to do this prior to upgrading). Here's how:
Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
Install the App from the App Store.
Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.
Photos is v1 of a new app, as yes it's not as mature as iPhoto. It uses a different technology for working with external editors. That requires Adobe to write an extension to let it hook into the new app. Not done yet, neither has anyone else.
Going forward: iPhoto will run on OS 10.10., but there is no guarantee for subsequent versions of the OS. You might want to factor that into your anger term thinking.

Has anyone not working with .dv files had synchronization problems?

Has anyone not working with .dv files had sound synchronization problems? I'm not exactly sure what the alternatives to DV are, but I think one of them is HD.
The reason for asking this question is to help isolate the nature and cause of a very serious flaw in iMovie '11. In the original release of iMovie '11 (version 9.0) there was a small--but serious--synchronization problem. In the 9.01 there is a large synchronization problem. We know of one person who has not experienced the problem, and he is not working with DV files (media). So we want to find out if anyone who is using something other than .dv files is experiencing a lack of synchronization between sound and picture. Knowing the answer to this will help with figuring out where the cause lies. For the initial iMovie '11 release (9.0), you probably would not notice a problem unless you had very long event-clips, e.g., two hours long. Events get this long if you are transferring from analog 8 mm tapes. Even then, it would have to be in scenes in which the connection between event and sound is obvious, e.g., close ups of people talking. It isn't until the 9.01 release that most people would notice anything. All we need to do is establish one case of a synchronization problem in which the person is using something other than DV.
Message was edited by: Paul Bullen

Hopefully, the 9.0.2 release will make my question moot. Zyfert must have posted the announcement of the release just as I was formulating my question. Still, if you have information on the subject, it would be interesting to hear.

::.jsp page is working But .java file is not working::

Hi,
I have made a jsp page in that i am able to fetch data from Oracle 10g XE,Using jboss-4.0.4.GA .Its working fine.
Problem: But when i made the same file in .java. i am able to compile the file but not able to run the file.
Evnironment setting are like:
User Variable::
JAVA_HOME
C:\Program Files\Java\jdk1.5.0_03
CLASSPATH
C:\Program Files\Java\jdk1.5.0_03\bin
C:\oraclexe\app\oracle\product\10.2.0\server\jdbc\lib;
C:\oraclexe\app\oracle\product\10.2.0\server\jdbc\lib\ojdbc14.zip;
C:\oraclexe\app\oracle\product\10.2.0\server\jdbc\lib\ojdbc14.jar;
C:\oraclexe\app\oracle\product\10.2.0\server\jdbc\lib\ojdbc14_g.jar;
C:\oraclexe\app\oracle\product\10.2.0\server\jdbc\lib\orai18n.jar;
System Variable::
PATH
C:\oraclexe\app\oracle\product\10.2.0\server\BIN
Here is my Code:
package com;
import java.sql.*;
import oracle.jdbc.pool.OracleDataSource;
import java.io.*;
class GroupedData
     public static void main(String []args) throws Exception
          OracleDataSource ods = new OracleDataSource();
          ods.setUser("system");
          ods.setPassword("shekhar");
          ods.setURL("jdbc:oracle:oci:@");
          Connection conn = ods.getConnection();
          Statement stmt1 = conn.createStatement();
          ResultSet rs1 = stmt1.executeQuery("SELECT * FROM TEST");
          //Loop through results of query.
          while(rs1.next())
          System.out.print(" |" + rs1.getString("C_IMSI") + " |");
          System.out.print( rs1.getString("C_SIM") + " |");
          System.out.print(" " + rs1.getString("C_NAME") + " |");
          System.out.print(" " + rs1.getString("C_ADDRESS") + " |");
          System.out.print(" " + rs1.getString("C_CITY") + " |");
          System.out.print(" " + rs1.getString("C_STATE") + " |");
          System.out.print(" " + rs1.getString("ASPLDESC") + " |\n");
          Statement stmt = conn.createStatement();
          ResultSet rs = stmt.executeQuery("SELECT ASPLDESC, COUNT(ID) AS OCCURANCE from TEST GROUP BY ASPLDESC");
          //Print start of table and column headers
          System.out.println("| ASPLDESC | Total Occurance |");
          // Loop through results of query.
          while(rs.next())
               System.out.println("| " + rs.getString("ASPLDESC") + " | " + rs.getString("OCCURANCE") + " |");
Here is my jsp file which is working fine with JBOSS:
<%@ page import="java.sql.*" %>
<%@ page import="oracle.jdbc.pool.OracleDataSource" %>
<HTML>
<HEAD><TITLE>Simple Oracle Example</TITLE></HEAD>
<BODY BGCOLOR="#FFFFFF">
<CENTER>
<B>XID Report generation</B>
<BR><BR>
<%
OracleDataSource ods = new OracleDataSource();
ods.setUser("system");
ods.setPassword("shekhar");
ods.setURL("jdbc:oracle:oci:@");
Connection conn = ods.getConnection();
Statement stmt1 = conn.createStatement();
ResultSet rs1 = stmt1.executeQuery("SELECT * FROM TEST");
//Print start of table and column headers
out.println("<TABLE CELLSPACING=\"0\" CELLPADDING=\"3\" BORDER=\"1\">");
out.println("<TR><TH>C_IMSI</TH><TH>C_SIM</TH><TH>C_NAME</TH><TH>C_ADDRESS</TH><TH>C_CITY</TH><TH>C_STATE</TH><TH>ASPLDESC</TH></TR>");
//Loop through results of query.
while(rs1.next())
out.println("<TR>");
out.println(" <TD>" + rs1.getString("C_IMSI") + "</TD>");
out.println(" <TD>" + rs1.getString("C_SIM") + "</TD>");
out.println(" <TD>" + rs1.getString("C_NAME") + "</TD>");
out.println(" <TD>" + rs1.getString("C_ADDRESS") + "</TD>");
out.println(" <TD>" + rs1.getString("C_CITY") + "</TD>");
out.println(" <TD>" + rs1.getString("C_STATE") + "</TD>");
out.println(" <TD>" + rs1.getString("ASPLDESC") + "</TD>");
out.println("</TR>");
out.println("</TABLE>");
Statement stmt = conn.createStatement();
ResultSet rs = stmt.executeQuery("SELECT ASPLDESC, COUNT(ID) AS OCCURANCE from TEST GROUP BY ASPLDESC");
//Print start of table and column headers
out.println("<BR><BR><TABLE CELLSPACING=\"0\" CELLPADDING=\"3\" BORDER=\"1\">");
out.println("<TR><TH>ASPLDESC</TH><TH>Total Occurance</TH></TR>");
//Loop through results of query.
while(rs.next())
out.println("<TR>");
//out.println(" <TD>" + rs.getString("ID") + "</TD>");
out.println(" <TD>" + rs.getString("ASPLDESC") + "</TD>");
out.println(" <TD ALIGN='RIGHT'>" + rs.getString("OCCURANCE") + "</TD>");
out.println("</TR>");
out.println("</TABLE>");
%>
</CENTER>
</BODY>
</HTML>

user552380,
You don't need three different JDBC drivers in your CLASSPATH, only one.
Are you getting an error message?
If you are then please post the entire error message and stack trace you are getting.
Note that you can use the [ code ] and [ /code ] tags (without the spaces) to format
your code.
Good Luck,
Avi.

Not Publishing "Work in Progress" Files

Similar Messages

Maybe you are looking for