Not reaching full capacity

I have a 20g iPod (w/ clickwheel) and am using iTunes 7.1. and I 18.75g of songs (4800ish) in my library (not sure if that includes Podcasts or not, I don't think so).
The last few times I did an auto-sync, I see only 3498 songs on my songlist and notice some artists missing...
I am not receiving any message saying that my iPod doesn't have enough room and do I want to create the iPod Selection playlist...
Any advice so that I can get my iPod to auto-sync to its fullest capacity?
Thanks!

Check how much room you have left on your iPod after an auto-sync.
By the way, if you did not know, after you format an iPod, the total capacity is NOT 20GB. It will actually be around 17GB or 18GB.

Similar Messages

IPod Shuffle does not reach full capacity

Currently my iPod has 223 songs and is at 891.3 mb capacity. I noticed in the connections that data accounts for 80MB of the space. Enable disk drive is not checked and the slider is to the left for more songs.
How can I find out what data is taking up that space and also delete the data so that I can download more songs.
Thanks in advance.

You can view your Ipod in my computer and then right click on your Ipod and select exlorer then view the hidden files to see where the extra space which files are using your ipod space.
To view your hidden files while in the My Computer Window - Select Tools - Folder Options - Click on View Tab - Put check mark in View Hidden Files - Click ok and you will see the Hidden folder Ipod_Control Right click on this folder to see the size of this folder.
Hope this helps
Global51

Not reaching full charge?

As with all Apple products the iPhone's instructions clearly say that a plug symbol will appear in the battery area when a "full charge" is reached. It was charged overnight, about 8 hours, and still showed the lightning bolt, not the plug symbol.
What's up with that?

You're looking at the small battery at the upper right of the status line (not the large green battery). When completed it shows a "plug" inside the battery instead of a "lightning bolt".
As others have said, the last 20% of charge takes longer and works better in you use a power plug rather than connecting to the computer. Be patient and it will finish. If not, you may need to have Apple check it out.

Time Capsule Not Using Full Capacity

Good morning. I have a 1tb Time Capsule and use Time Machine to backup my iMac and my son's MBP.
The Time Machine backup is reporting that 235gb of 998gb is available. But it's been "stuck" at about 235gb for weeks. It seems as if the system is not using all available capacity. Is this normal?
I should note that at one time I had miscellaneous folders and files on the Time Capsule (from a PC). Would those miscellaneous files have somehow "blocked" access to the rest of the free space? I have removed those misc files, but still not seeing the system use my full drive capacity.
Any ideas how to get the system to use the rest of the drive?
Thanks in advance, John

The Time Capsule is reporting on the space that backups are using on the drive. Backups are stored in a special container called a sparsebundle file.
Sparsebundles behave differently than normal files. The sparsefundle expands as more data is added.But, it behaves differently when files are deleted.
So, lets say that the sparsebundle is up to 100 GB. Now, you delete 10 GB from your backups beasue you don't need the files any longer. So, you think you should see 90 GB now.
The sparsebundlw will still show as a 100 GB. It will begin to "grow" again when more than 100 GB is present.

HP LaserJet M1132 toner cartridges not delivering full capacity

I have a LaserJet M1132 MFP bought last week. Connection is USB, operating system is Windows 8 - 64bit. Have upgraded to latest firmware. Driver is latest Windows 8 driver. Settings are default (fastres 600).
When using the initial toner cartridge that came with the unit, it delivered only around 250 text (note text and not graphics) pages before it ran out. I know this because I bought three reams of paper when I bought the unit and used half a pack. Coverage was around 50% per page, double sided. I took it out and shook it but this made no difference.
I purchased two new original HP CE285A cartidges at the same time as I bought the printer. I wondered if the original cartridge was a reduced capacity cartridge. So I installed a new cartridge. The toner light came on after printing 935 pages (from the status page). Again, the majority of these were text pages at 50% coverage double sided.
Each cartridge is £75 which gives a per page cost of around 8p/page (not including the cost of the printer) which is outrageous for a laser printer. The packaging estimates around 1,500 pages per cartridge but I clearly didn't get anywhere near this with the first cartridge and am not getting this with the second one either. I have another HP MFP (3500) which delivers around 5 reams before a cartridge runs out.
I am an extremely experienced user with 25 years in printing and imaging and know that estimates assume a certain coverage. I am by no means using a heavy coverage. I am extremely unhappy to say the least. Your help and advice appreciated.
Regards
Tony Harris
This question was solved.
View Solution.

The only thing you can do to try and extend the cartridge life a bit more is enable EconoMode on the print driver. Most likely this was enabled on the devices being tested for the cartridge yield. I'll include the instructions to enable it below. Let me know what happens.
Click on the Start menu.
Click on Devices and Printer.
Right-click on your printer.
Select Printer Preferences.
Click on the Quality tab. It may be labeled as the Paper/Quality tab.
Click the box next to EconoMode to enable it.
Click Apply to save the change.
Click OK to close the window.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Netcfg not reaching full bitrate

So i got a new wireless adapter with the rt2870 chipset.
I could only get it to work with Wireless N by installing the rt2870 package from the AUR. So at the minute i'm using the network daemon to connect without encryption. It uses a config from /etc/wireless/RT2870STA.dat, which contains the following:
#The word of "Default" must not be removed
Default
CountryRegion=5
CountryRegionABand=7
CountryCode=GB
ChannelGeography=1
SSID=dlink46
NetworkType=Infra
WirelessMode=7
Channel=11
BeaconPeriod=100
TxPower=100
BGProtection=0
TxPreamble=0
RTSThreshold=2347
FragThreshold=2346
TxBurst=1
PktAggregate=0
WmmCapable=1
AckPolicy=0;0;0;0
AuthMode=OPEN
EncrypType=NONE
WPAPSK=
DefaultKeyID=1
Key1Type=0
Key1Str=
Key2Type=0
Key2Str=
Key3Type=0
Key3Str=
Key4Type=0
Key4Str=
PSMode=CAM
AutoRoaming=0
RoamThreshold=70
APSDCapable=0
APSDAC=0;0;0;0
HT_RDG=1
HT_EXTCHA=0
HT_OpMode=0
HT_MpduDensity=4
HT_BW=1
HT_BADecline=0
HT_AutoBA=1
HT_AMSDU=0
HT_BAWinSize=64
HT_GI=1
HT_MCS=33
HT_MIMOPSMode=3
HT_DisallowTKIP=1
IEEE80211H=0
TGnWifiTest=0
WirelessEvent=0
CarrierDetect=0
AntDiversity=0
BeaconLostTime=4
PSP_XLINK_MODE=0
And here's the output of iwconfig:
[mountainjew@archy ~]$ iwconfig
lo no wireless extensions.
ra0 Ralink STA ESSID:"dlink46" Nickname:"RT2870STA"
Mode:Managed Frequency=2.462 GHz Access Point: 1C:AF:F7:25:E6:DE
Bit Rate=270 Mb/s
RTS thr:off Fragment thr:off
Link Quality=89/100 Signal level:-54 dBm Noise level:-71 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
The only way i get full wireless speed is by setting the WirelessMode to 6 or 7. I know this kind of setup is supposed to be depricated, but it's the only way i get full speed. Now i'm trying to use encryption, and for some reason it doesn't work by editing that RT2870STA file with the encryption info. So i tried netcfg, and it connects fine using WPA2, but i only get 54Mb/s instead of 270Mb/s, which i normally get. I assume this is because it doesn't touch that file anymore through netcfg.
So how can i get netcfg to set the wireless mode to N?
Oh and here's my netcfg profile:
CONNECTION='wireless'
DESCRIPTION='A simple WPA encrypted wireless connection'
INTERFACE='ra0'
SECURITY='wpa'
ESSID='dlink46'
KEY='*********'
IP='dhcp'
Last edited by Mountainjew (2010-03-23 04:12:36)

I have a WLAN card that keeps connecting at 1Mbps. I can fix this using sudo iwconfig wlan0 rate 54M.
Looking at the netfcfg wiki article, there is IWCONFIG and PRE/POST_UP/DOWN configuration variables. You could try setting the rate using the IWCONFIG setting. That's what I'm going to try after work today. I'll let you know how it works out.

Flash player not using full capacity. (11.7/8)

I have been attempting to play an extremely resource-heavy flash game: Madness: Project Nexus. I have a gaming computer with a 670M GTX gpu and a i7 Quad Core 2.7 Ghz, with 12GB of DDR3 RAM. OS is Windows 7 Home Premium. Browser is Firefox Aurora 23.0 Alpha 2. Exact Flash Player version is 11.7.700.224.
However, flash player doesn't use enough of the processor or the RAM. At most, I've only experienced a 30% RAM and a 25% processor usage. How would I increase the parameters to allocate upwards of 8GB of RAM and 100% max processor usage for Adobe Flash?
It isn't the computer slowing me down; Flash player doesn't use enough of it. That's why I need help.
Nobody likes lag.
Message was edited by: sparetyres several times

First thing to check: do you have the "kill-bit" for Flash Player set (e.g. by some malware): http://www.adobe.com/software/flash/about/
If you have, don't fix it manually (unless you are very confident using the Registry Editor); just post back, and someone will post an easy way to remove that "kill-bit".

Canon HFS 10 log & transfer not using full capacity of camera

I hope someone can help.
Just bought a Canon HFS10 AVCHD handycam that boasts it records at 24 Mbps but when using log and transfer the clips are only recording around 10 to 13 Mbps.
There doesn't appear to be an option in 'Log and Transfer' to up the rate.
How do I get Final Cut Express to take up video from the camera at 24MBps?

Here's a recent thread I did on the topic:
http://discussions.apple.com/thread.jspa?threadID=1964703&tstart=0
The basic idea is that Canon boasts it captures at 24mBps, but is actually a variable bit rate and uses whatever rate it needs when capturing. As such, the data rate upon ingest would be the rate it captured at. There is no way to change the data rate within FCE, this solely depends on how the camera captured. 24mBps is probably the maximum data rate the camera has achieved in tests.

I have reached full memory capacity on my 500GB Time Capsule. I am considering purchasing a 2TB Time Capsule. Do I need to resave all existing data on the new hard drive or can I start afresh? Or can I link both time capsules to operate independantly?

Hi,
I have reached full memory capacity on my 500GB Time Capsule. I am considering purchasing a 2TB Time Capsule.
a) Do I need to resave all existing data on the new hard drive or can I start afresh?
b) Or can I link both time capsules to operate independantly?
Thanks,
Paul

You may not need to buy a new Time Capsule.
You can connect a USB drive to the Time Capsule, and use it in addition to the TC's internal HD. You may need a powered USB hub as well.
Exactly what is on your TC? If it's only Time Machine backups, you may not need to do anything -- Time Machine will delete the oldest backup(s) automatically when it needs room for new ones. But if you have more than about 250 GB on your internal HD, that 500 GB may not be large enough to keep backups long enough.
If you have other data on the TC's internal HD, besides your backups, you could back up to the external HD and use the internal for the other data, or vice-versa. But TM backups cannot "span" two drives, and you shouldn't mix backups and other data on the TC's internal HD.

Why is my iPod showing full capacity when it reaches 6.4GB when it is a 8GB iPod?

'I've had my 8GB iPod for nearly a year now and recently i filled it too full capacity, meaning i had to delete of things off it to continue adding music. But when i checked in the settings it said that it was full with 6.4GB used and 0GB availible, even though my iPod is 8Gb. Any help would be much appreciated

The other part is used for the system files for the system to run.
The 32GB has only 28GB available for use because the rest is uesed for system files.
That's how it is for all the iTouches.
~Lt. Leviathan

E3000 wireless connections not reaching maximum speed

E3000 running 1.0.0.3 firmware on Cox premier 30mb pipe. 2 wireless dell laptops Inspiron 9100 and Vostro 1000running 1350 and 1390 mini wireless g network cards with latest drivers installed. Direct connect machines run at full 30mb connection speedtest.net and Cox's own speed test. Wireless machines sitting next to router with excellent connection showing 48 to 54Mbps capacity but only getting 3-10Mbps throughput on speedtests. Cust Support through level 1, 2 and HQ cannot find the problem. Originally thought it was bad hardware so original router replaced and doing the same thing.
Sincerely appreciate any clues, suggestions or ideas anyone may have. The laptops are both about 5 yrs old or more but they should reach the capacity available, even on G networks, shouldn't they?
Thank you kindly!

How much speed do you get on a wired computer?
Speed test is not always accurate on most of the websites. You have Cox premier 30mb connection and you are getting 28-30 mbps speed on wireless computer. So I think the speed is pretty good.
If you are still getting slow speed then you can try changing the advanced wireless settings on the router.
Open the setup page of the router. Click on Wireless tab and go to Advanced wireless settings. Change the Beacon interval to 75, RTS threshold to 2307 and fragmentation threshold to 2306. Save the settings.
Go to the setup tab and change the MTU size to 1365. Save the settings. Power cycle the router and observe the speed.

WARNING: Full Backup option is NOT a full backup (you lose your older voicemails)

Just a warning out there for anyone upgrading phones or otherwise restoring from a back up. iTunes gives the option for either iCloud backup, which will "back up the most important data on your iPhone to iCloud", OR Computer Backup in which "a full backup of your iPhone will be stored on this computer".
A downside of the computer backup is that you have to plug in via wire. It is not a wireless option for backup. Frankly, that's not any bother. My phone sits each night at my desk anyhow to charge.
Another downside, however, that I discoverd today is that it is NOT A FULL BACKUP. It does not back up voicemail. Whether there is anything else it doesn't back up, I don't know. But it doesn't back up voicemails. How do I know? When I restored, I lost every voice mail older than 30 days (I'm an ATT&T user). That sweet message my 4-year-old left me. Gone. That client I needed to get back to even thought it's been a while. Gone.
I can't tell you how frustrating this is. Doesn't make it better when Apple tried to start blaming AT&T.
The Apple engineers have screwed this one up. Either allow the option for autobackups during a wired sync AND allow iCloud backup (rather than requiring you to select either or).. OR include visual voicemail backup as part of the full back up to the computer. In other words, make sure that "full back up" means "full". And if you can't do either of those, then don't use the word "full" when it's not a full back up. Include the caveat that you might lost voice mail if you don't do an iCloud back up.
Apple: fix this.
Consumers: Avoid this situation. Before switching phones, do the iCloud sync, then do a manual backup. That would have avoided this situation of losing voicemails. Now I know. Too late for me -- but hopefully not for you.

Apple blaming AT&T (as told to you by AT&T), and you believe AT&T that it's Apple's fault? Voice Mail is a service provided by your provider. Apple is not the provider - AT&T is. In the AT&T User Guide, they tell you how to permanently save your voicemails. They also say this:
4. YOUR RESPONSIBILITY TO RETRIEVE MESSAGES.
AT&T assumes no responsibility for
the deletion or failure to store or retrieve Voice Mail messages.
As described in Your Guide, your Service will retain only a
limited number of messages and will store messages only
for a limited number of days. AT&T retains the right, at AT&T’s
sole discretion and at any time, to change any
of the capacity limits on message exchange and st
orage. Accordingly, timely retrieval of
messages is your
responsibility.
FYI, here is a link to the AT&T Voice Mail User Guide:
https://www.vm.att.com/dchelp/EN/att_vm_user_guide.pdf
Apple is not to blame here - it is not Apple's job to keep your Voice Mails - it is AT&T's job. iTunes doesn't back up Voice Mail at all as indicated here:
http://support.apple.com/kb/ht4946
It backs up the Voice Mail password, but not the actual Voice Mail. If you only have 30 days - talk to AT&T....
Sorry you lost your 3-year old's message. That is really sad..... Just wanted you to know where the problem actually lies.
Cheers,
GB

Erreur:sapgui640 partner not reached(host 127.0.0.1 service sapdp00)

I am a beginner on SAP R/3 .
my laptop configuration is: windows xp média center
1.86Ghz 1G de Ram 80G de HDD.
I have installed all those thing -Full download includes SAPGUI (2 files 1.5GB, 1.25GB)
-Download SAPGUI only! (342 MB)
- Installation Guide (PDF 1.32 MB)
my laptop is not connected to a Lan;when I try to launch my first connexion on
sap with a user account I have the following message:
erreur:sapgui640
partner not reached(host 127.0.0.1 service sapdp00)
wsaeconnrefused:connection refused
thanks in advance for your help

Hi,
Have you installed MS Loopback Adapter? If not do so. You need it, if you are not connected to a LAN. For instructions how to install and cofigure it have a look at install help which is included in the dowload.
Regards
Daniel

Please helpJ2EE engine JCO did not reach the "starting application" state

Hi,
I get the following error "J2EE engine JCO did not reach the "starting application" state" when I try to install my Java components using SAP Development Studio.
When I checked my std_servero.out the get the following error
[GC 65868K->39262K(128320K), 0.0173335 secs]
[GC 65942K->39031K(128320K), 0.0071339 secs]
[GC Full GC[Unloading class com.sap.engine.customizing.ccms.CustomizePerformanceMTEObjectImpl0]
[Unloading class com.sap.engine.customizing.ccms.CustomizeSingleMessageMTEHomeImpl0]

Hello Santhi
The GC messages you see are just an indication of the garbage collector activity. It is not an error.
I'm not sure about what you are doing with the Developer Studio. I guess your WAS Java is already installed, is it right? Are you able to start the visual administrator? Please, paste here the exact error you receive.
Regards,
Désiré

270X not reaching load with Kombustor

Hello,
Another question about my 270X Hawk.
First off, here is my system setup:
Z87 MPower
i5-4670k @ 4.2 ghz (fixed)
16gb Corsair Vengeance underclocked to 1866 cl 9
Corsair RM 750 psu (750w)
R9 270X Hawk w/ newest vbios (.041)
The GPU maxes out at about 80-85% load at 67-68C with Kombustor regardless of the clock settings I choose. I have the power limit set to +20 in Afterburner, and I made sure that the CPU is fixed at 4.2 ghz (~30% usage at 43-45C).
The only way I can get the gpu to reach full load is if I launch HWiNFO64 while Kombustor is running. The load will jump up to 95 then 99% for 1-2 seconds while the HWiNFO sensor data is loading, then drops back to 80-85%. Again, the load % maxes out at that range regardless of the clock settings...1150/1400 (stock), 1220/1450, I even tried with the core set up as high as 1285, but the usage % stays in the same range, with only a minor difference in the average frame rate (94@1150, 95@1220-1250). The maximum range that Kombustor hits during that 1-2 seconds at 99% load varies by 20-30fps (105@1150, 138@1250).
I can't figure out what could be causing the bottleneck. It definitely isn't a thermal issue or a CPU bottleneck. I'm using a fresh driver install (13.12) and reinstalled Afterburner while keeping my settings.
Any idea what could be causing the load not reach max aside from thermal and CPU bottlenecks?
I'm also noticing that the VDCC current goes to between 80-88Amps under load, but the power draw is only ~120W...when it hits 99% load, GPUZ does not show any readings for the amps or power draw???
None of that really makes sense to me because the card never got to the point where it was unstable or crashed. It simply never goes beyond 85% load, and so never crashes...though even then I was not comfortable setting the core clock higher than 1285....

I've figured out that this is the result of having "Enable low-level hardware access interface" unchecked in Afterburner settings...which coincidentally is the only way to gain access to the triple "unlocked" voltages on the Hawk card...
So what exactly is the point of having "triple unlocked voltages" for overclocking if accessing the voltages restricts the GPU to 85%-ish load? Is this a bug with Afterburner??

Not reaching full capacity

Similar Messages

Maybe you are looking for