Not reading burned cds

my imac won't read anything burned by another computer, mac or not. is there a driver i could download for this, and if so - which one? i have no idea when i get to driver downloads where to go. thanks in advance for any help! have a great day!

Samantha, Welcome to the discussion area!
There is nothing to download to add this ability. Your iMac should be able to read those discs.
Have you tried cleaning the optical drive? Use one of the kits that contains a CD with brushes on the bottom. This will clean the dust off the laser lens.

Similar Messages

  • Tryen to annex rest of HD but dvdr+- not reading burned cds

    I fixed my hard drive problem.
    so i burned a cue/bin file from my old PC , using its burner burn partion magic to cd so i can istall it on the MEGA.and i'm encountering the following problem. after i burn the Cd it work on the Pc i used to burn it on both that computer CD-r,and DVD rom , but when i try it in my mega 865 it just spins, "my computer "stops responing sometimes,i have to go through task manager to get it to shut down . i tried to access it through "run" n it gives error that say something like " cannot read this drive, disk may be corrupt of in unsupported formatt" , is this due to my DVD-r its an LG GSA-4081B. ?
    Should i contact LG ????
    Optical Drive HL-DT-ST DVDRAM GSA-4081B (DVD+RW:8x/4x, DVD-RW:4x/2x, DVD-RAM:3x, DVD-ROM:12x, CD:24x/16x/32x DVD+RW/DVD-RW/DVD-RAM)
    INjuX

    frjoe,
    A few suggestions:
    -Here is an tech article dealing with CDs and optical drives:
    http://docs.info.apple.com/article.html?artnum=58382
    -Your optical drive will not read CD-RWs so make sure it is a CD-R.
    Since you are in the G3 Discussions, I would head over to the Older Hardware > Older Powerbooks for additional help if necessary:
    http://discussions.apple.com/forum.jspa?forumID=630

  • Satellite M30-107: Mat****a UJ-820s not reading burned CDs

    Anyone know why. Tried different burning programs made no difference. Works on every pc/laptop on the planet except this laptop! It shows up as a blank cd !!
    any ideas?
    thanks

    Hi
    Possibly the drive cannot read this CD because it doesnt support it.
    Of course, this is very strange that it doesnt work only on your notebook drive but in the user manual you will find the list with the properly worked medias. It is possible that other medias will not work correctly.
    I have had also a same issue. The burned CD doesnt work on my notebook but on the second notebook was no problem.
    I have purchase a different brands and tested it. Now the drive accepts the TDK medias.
    I think on your notebook is it a compatibility issue.

  • Tecra 9100 won't read burned CDs

    Hi.
    I have a Tecra T9100 and the MAT****A DVDROM now won't*read burned CDs.
    It has no problems when reading manufactured CDs / DVDs.
    I noticed this after upgrading the BIOS with the 1.6 version.
    Is there something else I need to do / configure / install ?
    Thank you.

    Hi
    Maybe you should check different CDs from different manufacturers and should change the burning speed to the slowest one.
    If this will not help then a CD/DVD drive issue might be the reason why not all disks are readable.
    Cheers

  • HT2801 My drive reads discs as blank and not reading music cds at all.

    My drive is reading start up discs as blank and not reading music cds at all( they just spin in there until I eject them). They're clean, scratch free and ejecting with no problems. I replaced my hard drive three weeks back and need to replace programs and info.

    Try
    Intel-based Macs: Resetting the System Management Controller (SMC)
    <http://support.apple.com/kb/HT3964>

  • Problems reading/burning cds

    dvds and program cds are working, but itunes is not reading certain burned cds, and i am having trouble burning cds.
    today i tried to burn a playlist, 17 songs, 1.1 hrs, 72.7 mb on a 80min/700mb cd. it failed almost immediately and gave the message, "the attempt to burn a disk failed. the device failed to calibrate the lazer power level for this media."
    a previous attempt to burn a cd gave me a message saying something about an unused underwrite buffer or something, i should have written that message down too. any ideas?

    Welcome to Apple Discussions
    You possibly are using CD's incompatible with your CD writer. What speed are the CD's? I use Maxell 48x with my iMac with no problems, however, I find my iBook likes the 32x. Different writers. The iMac is a SuperDrive, while the iBook is the standard CD/DVD.

  • IMac not reading old cds?

    My iMac (late 2009) is reading some CDs but not others.  I put in the CD, it holds on to it for 30 seconds, then spits out without ever showing up on the desktop.  The only difference I can tell between the ones it does read and the ones it doesn't is the age, the old ones it is having problems with (i.e. made in the 90s), the newer ones (maybe roughly 2000 and on) is fine. My work computer can read them fine. Any idea what's up?

    Another help source (if you haven't already done so).
    Go to your OS Help Menu.  In the search field type dvd
    Click on all the troubleshooting topics & Support Articles that pertain to  your issue.
    You can also do the same in Disk Utility.  Open same up.
    At the bottom left of the window, click on the purple button w/the "?" in the middle.
    This will bring up the Help Menu.
    ===============
    Try a different brand.  Top forum favorites
    CDs
    FUJI
    TDK
    Verbatim
    DVDs
    Maxell
    Verbatim
    ==============
    Apple's Disc Burning Quick Assist
    Make sure the DVDs are not dirty, smudged and/or scratched.
    http://support.apple.com/kb/TS2000 Mac doesn't start up from install disc
    http://support.apple.com/kb/HT2801 Apple Computers: Troubleshooting the slot-loading SuperDrive
    *** Your drive may need cleaning.  Cleaning kits can be purchased from any store that sells CD/DVDs. ***

  • ITunes 5 upgrade does not read my cds

    I think I went to the wrong section. Here is what I asked, anyone williong to help. Many thanks.
    Hi! It is my first posting here since I bought my PowerBook. No problems until I upgraded (through the automatic software upgrade) last week to iTunes 5. I was running ok iTunes and I could play my cds while working, however, now with this last upgrade iTunes does not recognize the audio cds and it does not show up in the left "source" window. What is going on? How do I solve this problem? is it necessary to downgrade (and how do I do it)? Thanks in advance for your kind help:D

    I'm having a related problem. iTunes 5 reads commercial CDs ok but CDs burned previously using older versions of iTunes are no longer associated with my library -- so the tracks don't come up with names/artists etc.
    does anyone out there know how to restore the pointer / link that associated the playlist filename with the file in the iTunes library?? I've looked at http://docs.info.apple.com/article.html?artnum=93952 and have located the CD Info.cidb file in my Library > Preferences -- but what do I do next?
    iTunes 5 automatically accesses CDDB but it obviously cannot find my custom mix in the database.
    It does read the burned CD OK and will play it.
    These are CDs burned from "regular" (not Smart) playlists using an older version of iTunes. The playlists still exist on iT5 and all the songs are still in the library.
    I'm assuming this has something to do with the fact that iTunes 5 has relocated the files (?)
    Thanks -- I've been searching around for the solution but no luck so far.
    Karen

  • Dual core iMac  will swuddenly not read blank cds

    suddlenly my new iMac will not read a blank cd any answers out there?
    thanks

    Hi sammi123
    Welcome to Discussions
    will not read a blank cd
    Do you mean it will not recognize a blank CD? If so, check to make sure that you didn't accidentally set your iMac to ignore blank CD's. You can check this in the CD's and DVD's tab of system preferences.
    Trevor

  • MBP Not reading certain CDs

    Hi,
    We've just bought a brand new 2GHz MacBook Pro with an extra 512Mb RAM installed (by Apple). After dutifully downloading about 400Mb of updates, including upgrading it to OSX 10.4.7 and downloading a firmware update (everything went fine), we started to play around with it.
    First disk I put in was a Futurama (Season 4) DVD - Apple DVD Player asked to confirm the region selection and said that "The region could only be changed 5 more times" - the disk played fine through both DVD player and Front Row.
    Next, I ejected this and put a music CD in (Jools Holland: Swinging the Blues, Dancing the Ska), but the MBP just spat this out. Next, I tried the Office '04 Student Edition installer CD, and after about 3 mins of clicking and whirring, this got spat out too. Thinking we had a dead CD drive on our hands, I tried 3 more music CDs - all worked fine -opened up in iTunes and Front Row and played fine. I even tried the installer CD for Photoshop CS2 and this worked fine, so did the Mac OSX Installer DVD (only software DVD to hand...). A CD that was burnt on our G4 Tower also worked fine
    I tried the two problem CDs in my G4 PowerBook (OSX 10.4.5), and they worked absolutely fine.
    I've done the basic troubleshooting things - reboot, repair permissions, reboot again, create another user account to see if the problem still exists, and there's no change - the two CDs keep on getting rejected by the MBP.
    What's going on here - is there an easy way to resolve this problem without taking the laptop on a 3 hour round-trip drive back to the Apple store? Everything else about it's fine - there is a slight whine but nothing at all to moan about (only noticable when actually listening for it). Are there any prefs files I can trash?
    The MBP has the SuperDrive, whereas the PB only has a DVD/CD-RW Combo drive.
    Thanks for the help

    The region limitation is explained here:
    http://docs.info.apple.com/article.html?artnum=60183
    While there are some region free DVD players, none of the ones I've seen on Macs are.
    Also Macs don't support Copy Protected CDs:
    http://docs.info.apple.com/article.html?artnum=106882
    Disks you've created on media which is not compatible with the drive may also pose a problem:
    http://docs.info.apple.com/article.html?artnum=58641
    I've also found a lot of bad media out there. Media stored on spindles have a tendency to last much shorter than media stored in jewelcases.
    The fact the Office disk got spat out suggests the drive or the disk in question may be becoming dirty.
    While there are disk drive cleaners out there, if your machine is under warranty, I'd recommend you stick with having AppleCare take care of it. Note, with notebook computers you often don't have to drive anywhere. Just call AppleCare, and they'll ship you a box to have it repaired by their service center. Before you do that, backup your data, and be sure to keep track of any case numbers they give you.
    As for your MacBook Pro:
    http://docs.info.apple.com/article.html?artnum=303365
    is recognized as something to contact AppleCare about.

  • Dvd not reading burned dvds consistently

    I am having problems reading DVDs that I burn on my Mac Pro 5,1. I can burn a DVD, eject and then reinsert and it may not load. I can take it to another Mac and it will load without a problem. I've tried to do some research without much luck. Most posts online are for Macbook with slot drive. I work in a printshop and there is a lot of printing dust so I'm thinking maybe the lens is dirty, how do I clean it. If it's dirty, will it still burn properly? That doesn't seem to be a problem that I can tell.

    Hello, I'd try one of these, many places have them...
    http://www.officesupply.com/technology/computer-accessories/cleaning-maintenance /cleaner-maintenance/fellowes-lens-cleaner/p28997.html?device=c&network=g&matcht ype=&ref=pla&cid=ad-pla-non-brand+&gclid=CJ-77YLtuL8CFQWTfgodOUcAAQ

  • Dvd not reading burned dvds

    I am having problems reading DVDs that I burn on my Mac Pro 5,1. I can burn a DVD, eject and then reinsert and it may not load. I can take it to another Mac and it will load without a problem. I've tried to do some research without much luck. Most posts online are for Macbook with slot drive. I work in a printshop and there is a lot of printing dust so I'm thinking maybe the lens is dirty, how do I clean it. If it's dirty, will it still burn properly? That doesn't seem to be a problem that I can tell.

    okay, all I can give you is my experience (bear in mind that I'm not an expert, nor do I work for Apple in any ways). You can clean the lens by possibly getting a can of compressed air and using that, maybe trying one of those dvd cleaning discs with the brushes on them. You may have to shut down your Mac Pro 5,1 let it cool down a bit, remove the side panel, then take out and disconnect the dvd drive, take it out,  open it up and clean the lens with lens cleaning fluid (for eyeglasses, perhaps-this is just a suggestion, I've done it once and it hasn't done any harm) then put it back together,  put the drive back in the sled, reconnect it, slide the sled back in, put the side panel back and restart your mac pro. if you have an air compressor, maybe compressed air from a tank, with a blowing tool (the one with the button on the top) might work, if you were gentle, I suppose. Hopefully something fixes your problem, daliah, if not maybe try repairing permissions in disk utility, if nothing works, try posting here again, and you're still having problems reading dvd's, could be the media, could be the drive needs replacing (but who knows?)  replacing a dvd drive, should you need to, is very easy.  In a pinch, you can use a dvd drive scavenged from a PC, as long as it is ATAPI/IDE  and as long as it works
    well, good luck to you
    John b

  • Powerbook not reading commercial CDs

    I've tried resetting the PRAM. I've tried deleting plist files. I've turned off "use error correction when importing audio cds" in itunes preferences.
    It does, however, read "Johnny Cash Live at Folsom Prison." Seriously.
    It also reads DVDs and CDs I've burned myself.
    Gus

    Mine won't read the White Stripes' Icky Thump.

  • MacBook not reading some cds and dvds (so disappointing)

    I just got the new 2.16 Macbook (white) a few days ago at Frys in Houston. Everything was going ok until I started to load m-audio protools from the cd, it repeatedly ejected the cd,so I tried loading some of my other software from cds and they seemed to work fine,then I tried to load protools again and after a few trys the cd drive worked. Day before yesterday I tried to watch the new movie Apocalypto and here we go again, it keeps ejecting the dvd.It will play some of my other dvds but not all of them, and yes they are super clean with no scratches. Here comes the crazy part, as soon as I put the dvd that wont work in the drive if I pickup the Macbook and shake it for a few seconds (not to aggressively) the dvd starts playing and it plays great the whole length of the movie. When I eject the dvd and try and play it again it wont accept it, it just keeps ejecting it. I returned it to Frys and got a whole new Macbook thinking I had a bad drive in the first one. The second Macbook has the same problem,so I returned it last night. I took the Apocalypto DVD with me and tried it on all of the Macbooks and Macbook Pros that were on display. They had a new 2.16 Macbook (white) just like the two I had just bought and it would not accept the dvd either. They also had the 2.0 Macbook on display and again It refused to load the dvd (keeps ejecting). I even tried the 17" Macbook Pro and the 15" Macbook Pro. The 17" wouldn't work either but the 15" worked great every time I put the dvd in. The drive that was in the 17" was the UJ-85J. The drive that was in the 15" was the HL-DT-ST DVDRW GWA 4080MA. The drive that was in the two Macbooks that I had bought and in 2.16 that was on display at Frys was the MATSHITA DVD-R UJ-857E. The drive that was in the 2.0 Macbook on display was the UJ-857D. Has anyone had this kind of problem lately. This is so disappointing,other than the drive acting up everything else was working great. My Quad G5 plays all my dvds great. Including the new Apocalypto movie.
    Any Idea Guys
    Thanks
    Joeip71

    You need to take the machine with your DVD's and CD's that are not working into an Apple Store or to an Apple Authorised Service provider and demonstrate the issue to them so that they can accurately diagnose the problem and replace the drive if it's found faulty. No one here will be able to tell you how to fix a drive which likely needs replaced under warranty.
    Alternatively, call Apple Support and they will assist you over the phone, and if they're unable to help you can mail it in for repair. Or (this is what I'd do) since you bought it less than 14 days ago, return it to a Fry's store for a refund or exchange for a new one.
    Nick

  • Why can my mac not read autorun CDs ?

    I have x-rays, which I can read on any PC, but not on my Mac - how can that be remedied ?

    Because the autorun CD is coded to run on a PC and not on a Mac.

Maybe you are looking for

  • How to trasnsfer my itunes library to my newly aquired (used) itouch

    I have an ipod classic with all my desired itunes content.  My wife just got an iphone, so she gave me her itouch.  How can I get my large library transferred to the itouch?

  • Properties file problem

    We have stored the properties file in a unix server and here is the path of the file: /ac/web/abc.xyz.com/props/ I am trying to access the file something like this: public PropertiesServiceImpl() throws FileNotFoundException,IOException {           i

  • How to upload data in excel file to an internal table

    hi, how can we upload data in excel file on presentation server to an internal table..? Any pointers on this would be helpful. Regards, Anil.

  • Can't open Final Cut Express HD v.3.51

    really annoying when you pay a lot of money for an application and are trying to get some work done and you get this message:"This software requires certain hardware or software which is missing. • Quartz Extreme Support." What is this all about? Tha

  • Increase number of rings before pickup

    How do I increase the number of rings before pickup on the iPhone4?