Not reading Canon Files both RAW ( CR2) and JPEG

I have been a long time user of Lightroom, now have LR 3.4 installed. No serious problems so far and I love using it. For a computer set up, I use a one year old Apple desktop with Lion installed. My problem is that this past week, my LR 3.4 will not read my Canon files, both CR2 and JPEG format. I have tried two different cameras ( 5d Mark ii and 7D ) two different card readers and several different memory cards. LR sees the files, starts to upload them and then on concluding its routine says it cannot read the file format. I am patching together a solution by importing the files through iphoto, exporting them to a file in my LR hierarchy file and then importing them into LR.
Clearly, this is not good. Has anyone had a similar problem? Can anyone offer a solution?
Thanks
Tom

You might get more help in the Lightroom forum than here in the Photoshop forum.

Similar Messages

CS4 will not read Canon 5D Mark2's CR2 files

Bought the Canon 5D Mark 2 for christmas.
Am running Bridge and PS CS4
They will not read the camera's CR2 files
The icon of CR2 shows in bridge but wont read the file
I'm on a Mac
Looking for a link to download the update.
Please help!
Nana

If from within bridge you go to Help>Update that should find
the camera raw 5.7 update and install it.
Here's where you can manually download the camera raw 5.7 update if
need be.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4680
MTSTUNER

Canon file RAW CR2 and mac book pro not working ...?

Canon file RAW CR2 and mac book pro not working ...?
I'm using Digital photo professional software
and i'm using canon camer 5D mark2 and mac book pro 13inch last version
i'm trying to shooting directly by Digital photo professional, Remote shooting but the RAW file con't open by the software or mac preview but with photoshop Cs5 can open
is any one have the same issu ? and how fix it please
What i did :
- update camera RAW
- Update Mac software
- update Digital photo professional
Regards,,
Bandar

Dear all
is there any solution for that ?

CS5 can't read Canon G-15 raw files - is there any fix for that?

CS5 can't read Canon G-15 raw files - is there any fix for that?

When you save the pictures out of Photoshop, also consider the pixel x pixel size
Photo Scaling for Video http://forums.adobe.com/thread/450798
-Too Large May = Crash http://forums.adobe.com/thread/879967
-And another crash report http://forums.adobe.com/thread/973935

I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them. Has anyone had a similar problem-.thanks

I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them. Has anyone had a similar problem….thanks

If you are having the same problem, i.e. a disk permission problem, open your favorite search engine and search on, "change disk permissions", and I think you'll find plenty of information on how to fix the problem. This is a Lightroom forum. Your problem is with your operating system. There is no sense in rewriting instructions that are already available if you do a simple search.

I have lost my photos/videos when i imported from my ipad 2 to my new imac latest version and it's not reading the files. I have downloaded iMac library manager and can see them. can someone shed some light please ?

i have lost my photos/videos when i imported from my ipad 2 to my new imac latest version OS X 10.8.4
and it's not reading the files. I have downloaded iMac library manager and can see them. when i go back into iphoto i'm getting the following message :
Do you want to switch the current iPhoto Library from “iPhoto Library.photolibrary” to “iPhoto Library.photolibrary” and relaunch iPhoto?
I don't know what to do - please help !!!!
can someone shed some light please ?

So it appears you have only one library on the hard drive. Apply the two fixes below in order as needed to that library:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.

I have Adobe photoshop cs5. need to update camera raw, cause my camera raw is 2010and does not read my camera, I went out and downloaded the new one and it does not link to adobe photoshop cs5

I have moved my Photoshop CS5 to my traveling computer,a Surface Pro 3. I have photoshop loaded but in trying to look at raw images it says my camera raw does not support the sony alpha 65 which is what I have. I went out and tried to download the newest raw version and even went out and did a zipfile download and it will not update my current version. What should I do

I have 6.0. Tried to download newest verion and it will not download. Went out and then downloaded a zipfile and it still will not download, thus cannot look at my raw pictures.
Thanks, John
m: gener7
Sent: Thursday, December 11, 2014 6:01 PM
To: JOHN STAHLY
Subject: I have Adobe photoshop cs5. need to update camera raw, cause my camera raw is 2010and does not read my camera, I went out and downloaded the new one and it does not link to adobe photoshop cs5
I have Adobe photoshop cs5. need to update camera raw, cause my camera raw is 2010and does not read my camera, I went out and downloaded the new one and it does not link to adobe photoshop cs5
created by gener7 <https://forums.adobe.com/people/gener7> in Photoshop General Discussion - View the full discussion <https://forums.adobe.com/message/7007148#7007148>

Whenever i try to download a rather large file i continue to get the "could not read source file" error. Tried new profile, uninstalling and looking for the compreg.dat file to delete nothing is working. Please help

whenever i try to download a rather large file i continue to get the "could not read source file" error. Tried new profile, uninstalling and looking for the compreg.dat file to delete nothing is working. Please help

Did you reinstall CS3 after CC?
For that matter, doing an in-place upgrade on the OS is always a gamble with Adobe programs. Reinstalling all the versions you need, in order, would probably solve your problem.
And you shouldn't need to save as IDML after opening the .inx in CC.

File name has .cr2 and .jpg

I'm exporting jpegs from .cr2 (raw) files. When I export out the version names as a .jpg the file name keeps .cr2 and adds .jpg. So my exporte file name is something like 001-HP8Q7590.CR2.jpg
This is happening on 3 of our computers, but not the 4th. What's up?
(the 001 at the beginning is a sequence that I add after editing the files)

An update:
I spoke with Aperture support. They suggested that I delete the Aperture preferences. After doing that the previously imported files still display incorrectly. (When looking at the File Info both the version name and the file name have the .CR2 extention which means Aperture thinks that .CR2 is part of the file name).
However, when I imported new raw files 3 different ways, the files display correctly under the File View. I imported direct from a CF card to Aperture, I used Photo Mechanic (my normal workflow) with IPTC Stationary Pad and without. All three versions of the import the files worked okay. So it was probably the preferences in Aperture were corrupted and it only fixed future imports.

Illustrator files cannot be opened: Could not read the file because an error has occurred.

I cannot open some files from Illustrator which contain PNG files placed. When I try to open the file, I get a message saying: "this png contains addtional data for Adobe fireworks, which will be discarded upon save." When I press "ok" I get the same screen again. When I press "cancel" I get: "coulld not read the file because an error has occured". I am currently working on a Mac Mavericks. Using Illustrator cc and Fireworks CS6.

Eliana,
If you have some file corruption, one thing often tried first is to create a new document and File>Place the (PDF contents, if any of the) corrupted one to see how much may be rescued that way.
Here are some websites where you can see whether it can rescue the actual file, and if it can, you may pay for a subscription to have it done,
http://www.recoverytoolbox.com/buy_illustrator.html
http://markzware.com/adobe-software/fix-illustrator-file-unknown-error-occurred-pdf2dtp-fi le-recovery/
http://www.illustrator.fixtoolbox.com/
As far as I remember, the first one is for Win and the second one is for Mac, while the third one should be for both.
Here are a few pages about struggling with it yourself:
http://daxxter.wordpress.com/2009/04/16/how-to-recover-a-corrupted-illustrator-ai-file/
http://helpx.adobe.com/illustrator/kb/troubleshoot-damaged-illustrator-files.html
http://kb2.adobe.com/cps/500/cpsid_50032.html
http://kb2.adobe.com/cps/500/cpsid_50031.html
http://helpx.adobe.com/illustrator/kb/enable-content-recovery-mode-illustrator.html

Photoshop Elements 11 will not read the new Nikon Raw/NEF

Photoshop Elements 11 will not read the new Nikon Raw/NEF (from Nikon D750) files even though codec has been downloaded - what do I do?

Unfortunately your software pre-dates the camera. Consider buying PSE13. But it is possible to download and install the latest free DNG converter to convert your raw files to the Adobe universal Raw format and the files will open in PSE11 (keep your NEF originals as backups and for use in the camera manufactures software)
Windows download (.exe file) click here DNG Converter 8.8
Mac download (.dmg file) click here DNG Converter 8.8
You can convert a whole folder of raw images in one click. See this quick video tutorial:
You Tube click here for DNG Converter tutorial

CS3 not reading xmp files generated in CS2.

CS3 is not reading xmp files generated in CS2.
If I open a raw file that was adjusted in ACR in PSCS2 with PSCS3 it does not recognize the adjustments that were made to the file.
PSCS3 opens the file in ACR with the default settings and I lose all of the adjustments and crops.
Is anyone else having this problem. If so: is their a fix or a stting I should use?

First. make sure you have updated to Bridge 2.1.0.100.
2nd, Purge the Cache from the TOOLS menu in Bridge.
3rd, Delete and rebuild your Bridge preferences by holding down the Option key (Command+Option, or Command+Option+Shift work as well) immediately after launching the application.
4th, if that doesn't work, make a fresh, new Mac account and log in as a different user.
Then report back.

IPhoto does not support Canon Powershot S45 RAW Format

Hi,
It seems iPhoto does not support Canon Powershot S45 RAW file format. Can this be added to be supported!?
Does anyone know how to report this to Apple and request this as a feature enhancement?

Or this link: http://www.apple.com/feedback/iphoto.html

Why will the front camera on my iphone 4 not work? On both the camera and snapchat.

Why will the front camera on my iphone 4 not work? On both my camera and snapchat

Hi there bananas321,
You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
-Griff W.

What are the commands available to read a file from application server and

What are the commands available to read a file from application server and store the file into an internal table?

Hi,
To read a file from an Application Server to an Object there is a command in ABAP called <b>READ DATASET</b>. After that file is transported to that object you have to do a loop and put that data in an Internal Table.
This statement exports data from the file specified in dset into the data object dobj. For dobj, variables with elementary data types and flat structures can be specified. In Unicode programs, dobj must be character-type if the file was opened as a text file.
For dset, a character-type data object is expected - that is, an object that contains the platform-specific name of the file. The content is read from the file starting from the current file pointer. After the data transfer, the file pointer is positioned after the section that was read. Using the MAXIMUM LENGTH addition, the number of characters or bytes to be read from the file can be limited. Using ACTUAL LENGTH, the number of characters or bytes actually used can be determined.
In a Unicode program, the file must be opened with an arbitrary access type; otherwise, an exception that cannot be handled will be triggered.
If the file has not yet been opened in anon-Unicode program, it will be implicitly opened as a binary file for read access using the statement
OPEN DATASET dset FOR INPUT IN BINARY MODE.
. If a non-existing file is accessed, an exception that can be handled can be triggered.
Influence of Access Type
Files can be read independently of the access type. Whether data can be read or not depends solely on the position of the file pointer. If the latter is at the end of the file or after the file, no data can be read and sy-subrc will be set to 4.
Influence of the Storage Type
The import function will take place irrespective of the storage type in which the file was opened with the statement OPEN DATASET.
If the file was opened as a text file or as a legacy text file, the data is normally read from the current position of the file pointer to the next end-of-line marking, and the file pointer is positioned after the end-of-line marking. If the data object dobj is too short for the number of read characters, the superfluous characters and bytes are cut off. If it is longer, it will be filled with blanks to the right.
If the file was opened as a binary file or as a legacy-binary file, as much data is read that fits into the data object dobj. If the data object dobj is longer than the number of exported characters, it is filled with hexadecimal 0 on the right.
If the specified storage type makes conversion necessary, this is executed before the assignment to the data object dobj. Afterwards, the read data is placed, byte by byte, into the data object.
System Fields
sy-subrc Meaning
0 Data was read without reaching end of file.
4 Data was read and the end of the file was reached or there was an attempt to read after the end of the file.
Thanks,
Samantak.
<b>Rewards points for useful answers.</b>

Not reading Canon Files both RAW ( CR2) and JPEG

Similar Messages

Maybe you are looking for