Not really a motherboard question ......

just kinda curious as to how i can save all my files on one hard drive , format the original hard drive, then reload all the files back to the original .
do the files need to be xp type.....for example if i have a win ME on one hard drive and xp home on the other...

Howdy...
If you have large amount of files.....let's say...in GIGBYTES....then create another partiton on your HD ...and move your important files to that partiton..and format other partiton...and then its up to you ..what you do next....You can leave those files on that partiton..so..you dont have to worry about them when you format your HD ...just dont format that partition......you know what i mean...
Its much faster...and safer ....(you dont have to worry about cd scratches...)
but if you need those files with you ..then use...Del UK  ...example...

Similar Messages

  • Txt-reader (not really a database question)

    Hello! I found this txt-reading class when googling for such a thing. http://www.kodejava.org/examples/28.html
    I am able to use this class to read text from a file, however, the swedish characters ÅÄÖ are causing trouble in the output text. Is there any way to add support for these characters in this class?
    I know very little about file management, I was simply looking for a finished class to do the job for me. since I am not capable of solving this problem by myself, I need your help!
    is there a way to avoid the trouble I am having with the foreign characters, or is there a better way to display text from *.txt files? My quest is to display text in a JTextArea.
    Edited by: uj2n on Sep 11, 2009 7:58 AM

    uj2n wrote:
    I tested replacing that line with the code you posted, but it got the same output as last time. UTF-8 should be fine since that is what I am using on my linux system.That's not a guarantee. Where did the file come from? That's what's important. I could make a text file with whatever character set I choose and send it to you; that doesn't mean that you using UTF-8 will be able to read it. I highly recommend reading [this article|http://www.joelonsoftware.com/articles/Unicode.html].
    Anyhow, how do I check if "åäöÅÄÖ" is included in UTF-8? Or might anything else be wrong?Those are surely included in UTF-8, as UTF-8 is a Unicode transformation format (UTF) and can represent (I believe) any Unicode code point. I would rather make sure that the font you're using to display the console (be it from Eclipse, from a terminal, etc) has support for those characters.

  • Not really a development question but I need some help

    I install Internet explorer 11 on my pc running windows 7x64 Ultimate, however once installed any site I go to that asks for a user name and password, when I click on the textbox I get NO cursor, if I press tab on my keyboard nothing happens, if I attempt
    to highlight text on a page it does not select anything, does anyone know how to fix this issue, if I use enterprise mode all of the above issues do not happen but god its a headache to try to figure that enterprise mode out, I am only 17 and this is just a
    home pc that I use for homework and gaming and I would like to have the html5 ability but when I cannot use internet explorer 11 for the above reasons then I am stuck down grading to Internet explorer 10... Please Help?

    The IE user forum is at answers.microsoft.com. If you get directed here, the direction is wrong.
    Web developers expect customers's browsers to be in working condition and there is no malware hijacking their web sites. It is like TV show producers expecting viewers to have a working TV.
    Visual C++ MVP

  • & nbsp; and pre Question: OT- Not Really a DW Thing

    I posted a question on this a couple of weeks ago.  The poet that I'm building this site for makes pictures with words and does so using spaces and returns.  It means that depending on the editor she uses, we end up with awful looking code absolutely chocka with <br />, or <p>'s and these  s.  Anyway, the nett result from the discussion previously was to use the <pre> element which, handily is offered as an option in the wordpress post editor.
    So now I have decided to go with <pre> as a container for the picotpoems, I'm still a little confused.
    If the poet uses Notepad and cut's and pastes into the Wordpress editor she can introduce a million   characters but if I reproduce the poem and strip all that out, and add the spaces in teh wordpress editor I don't see any   characters and the code looks a lot cleaner.  Incidentally, so far, I only see them using Firebug and the view source option in FF and IE8 don't show them.
    Here's the poet using Notepad: http://www.pictopoetry.co.uk/2011/01/whip-lash-2/
    Here's my version typed direct: http://www.pictopoetry.co.uk/2011/01/whip/
    Both poems indicate adult content: They are not really Adult, just a bit er... suggestive.
    Here are my questions:
    Is either way better?
    Am I losing sleep needlessly worrying about those  s
    Why does Firebug show them and Veiw>Source in the browser doesn't
    Thanks
    Martin

    Firefox's Web Developer Toolbar allows you to edit HTML code that is inside the <body> tags and your CSS files. 
    https://addons.mozilla.org/en-US/firefox/addon/web-developer/
    When you get things how you want them.  Copy the code and paste it into Notepad, NoteTab or some other plain text editor.
    Nancy O.

  • I recently forgot the password for my iTunes UK account with 100 pounds of credit. I called apple and said no one could help me if I did not know the security questions. Really?

    I recently forgot the password for my iTunes UK account with 100 pounds of credit. I called apple and said no one could help me if I did not know the security questions. Really? This company that pretty much can do anything is not able to tell me what the password is?
    Any help i appreciated!!!! what doe aApple do with all the unclaimed money from lost or forgotten accounts?
    Jeffrey

    For a forgotten password: go to http://iforgot.apple.com and sign in with your iCloud login. A new password will be sent to your associated email address. If this doesn't work you will have to contact Support. Go to https://getsupport.apple.com; click' See all products and services', then 'More Products and Services, then 'Apple ID', then 'Other Apple ID Topics' then 'Lost or forgotten Apple ID password'.
    For forgotten security questions log in at http://appleid.apple.com and click 'Password and Security' in the sidebar. There should be a link in the Security Questions section to send the answers to an email you have specified. Failing this, go to https://getsupport.apple.com click 'See all products and services', then 'More Products and Services, then 'Apple ID', then 'Other Apple ID Topics' then 'Forgotten Apple ID security questions'.

  • Siri go down all day long!  did not respond to any questions, always: "I'm really sorry about this, but i can't take any re questa right now. Please try again in a little while. "

    Siri go down all day long!  did not respond to any questions, always: "I'm really sorry about this, but i can't take any re questa right now. Please try again in a little while. " please help me!

    very very thanks!!!

  • Ever since I downloaded the latest version of firefox..is running slower, I am not really liking the new format, is there anyway to go back to the old one?

    Ever since I downloaded the latest version of firefox..is running slower, I am not really liking the new format, is there anyway to go back to the old one?

    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.com/kb/Server+not+found
    *https://support.mozilla.com/kb/Firewalls
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    See also:
    *https://support.mozilla.com/kb/common-questions-after-upgrading-firefox-36
    *https://support.mozilla.com/kb/how-do-i-get-firefox-button
    *https://support.mozilla.com/kb/why-are-tabs-top

  • Edge keeps resetting composition size ( not really responsive experiment )

    Hello all,
    This is more a question to the adobe edge animate team i guess rather than the community.
    I recently had to do a project in adobe edge animate. I noticed the scale/responsiveness/resize is not really fitting my requirements, so i decided to tweak the resizing a bit. I wanted to achieve a fully responsive layout starting from x:0,y:0 ( top-left ), so the composition is always shown at 100% width & height.
    The problem with the current animate scaling is that , it always has blank/white spaces on the sides. Even if using the BOTH option in the composition settings it always fits( scale ) the content just by one of the dimensions( the bigger fitting one ). It would be either by height or by width , but not both. The other dimension is compensated with blank space.
    I made it work. Here's the demo. It's not completed and not sure if it will be because.. When the stage/composition loads, stars resizing(drag) the window. You'll notice that the stage resizes correctly and all of a sudden a smile starts appearing on anyone face, but unfortunately every time a user clicks a button ( or any action is executed ) the runtime resizes the main app again to it's original dimensions, breaking the fullscreen resize. For example , click on the black button NEXT , and you'll see the stage resized again with the edge resize logic
    I'm attaching my resize logic immediately after the resizing of the edge animate( binding it to the window resize ), that's why everytime a user resizes the window the resize is correct. The aspect ratio is preserved everywhere and everything works as I wanted, but for some strange reason for me everytime an action ( timeline action/trugger ) , or even a button action/trigger, the resize logic block is executed.
    So i guess my questions are:
    1.Why does edge animate resize the wrappers and the composition everytime an action is executed ? Isn't this also a performance problem?
    2.is there a way to stop this behaviour. I even made the composition non responsive hoping for even better result. In this case only my logic would be executed instead of two times for each resize event ( edge resize & my resize )
    3.Is there any way to overload the edge resize method or any way to make this work( stop animate to resize the stage and wrappers for every action )
    4.Also.. currently there is a resize initially so the stage is also resized on first view without resizing the window. but again i guess, because there are actions in my stage they are resetting the first resize aswell. I guess this one will not be a problem if the previous issue can have a workaround somehow.
    Thanks a lot..

    Hi Dalex,
    1. You need to know that Edge animate handles the responsive scaling by using css scaling the stage div element along X and Y axes by the same amount so that the aspect ratio is maintained. And that's the reason, when you apply responsive scaling value to both, Edge checks which of the attribute (height or width) fits the whole screen, and depending upon that it applies the scaling with aspect ratio maintained.
    2. By looking at the demo, I think that you want to have responsive scaling such that the game fits the whole screen along width and height. If I am thinking right, then that way, I think it will have a bad user experience if the user resize the window more in one direction, then you will loose the aspect ratio.
    3. So, what I would recommend is that you use "responsive scaling"=> "height or both", and "Center Stage"=>"horizontal or both". This way you'll have empty white space on either side but will have good user experience. Also, this way, you no longer need to use any extra code to handle responsive scaling yourself, and responsive scaling will work even after clicking buttons(as in your case).
    4. But still, if you don't like step#3, then you will have to create the whole anomation in Edge with units as "%" instead of "px". But in your case, it won't look good if user resizes browser window more in one direction.
    Let me know if that helps.
    hth,
    Vivekuma

  • HT5527 This doesn't really answer my questions.  How do I reduce storage?  What's being stored in iCloud anyway?  Just what's backed up on phones and iPad?  Do I increase storage through my laptop in which case I click on the OS X or the iPad/Phones which

    This doesn't really answer my questions.  How do I reduce storage?  What's being stored in iCloud anyway?  Just what's backed up on phones and iPad?  Do I increase storage through my laptop in which case I click on the OS X or the iPad/Phones which is IOS.

    Your iCloud account stores your iOS device backups as well as your synced data (contacts, calendars, notes, etc.) and iCloud email (if you have an iCloud email account).  You can see how much is being used on your iPad by going to Settings>iCloud>Storage & Backup>Manage Storage.
    If you want to purchase more iCloud storage, you can do this on any of your iOS devices or computers that are signed into your iCloud account, as explained here: http://support.apple.com/kb/HT4874.

  • I'm not really a computer guy.Just got a Kodak easy share camera. When I  import the photos, they go to the area with my name in a file with the date. How can I move them to iphoto, or even better, import them directly to iphoto??

    I'm not really a computer guy. I just got a Kodak"easy share" camera. When I import the photos they go to the section with my name in a folder. How do I get them from there to iphoto, or better yet, how can i import them directly to iphoto?? As stated, I'm not knowledgable,have an imac and need real rudimentary direction.

    in the iPhoto preferences be sure the action when camera is connected is open iPhoto
    What program are you using to import the photos?
    If they are in a folder you can drag that folder onto the iPhoto icon in the dock to import - our launch iPhoto and under the file menu import from that folder
    For real rudimentary directions try the iPhoto tutorials - and it would be a worthwhile investment of time to take the iphoto tutorials - http://www.apple.com/findouthow/photos/ - they are very helpful and will save you a lot of time and frustration. for the concepts - actual commands mya have shanged in some cases - and under the iPhoto help menu ==> iPhoto help - watch the videos there
    LN

  • Some of my contact names are not appearing when they text message me.  They are just showing up as their numbers. I have them saved in my phone so i am not really sure why their names aren't showing up when they message me?

    some of my contact names are not appearing when they text message me.  They are just showing up as their numbers. I have them saved in my phone so i am not really sure why their names aren't showing up when they message me?

    I have this identical problem.  For a while my group texts didnt show up on my ipad.  Then one day they did, maybe everyone in the group started using the same os version or something.  Ever since my first reply to the group there have been complaints of multiple threads.  I can not find a pattern for when my group text's decide they want to create a new thread. (it doesnt happen every time)  Everyone in the group has deleted the thread, we've all toggled imessage on/off etc.  There still hasn't been a solution.
    Any help would be appreciated.
    Thanks

  • [Not really solved] Video with Pidgin is not working

    Hi,
    I would like to use video chat with Pidgin, but it doesn't work on my computer.
    I have a webcam (:D), and it seems that it is correctly recognized because ` vlc v4l2:// ' shows me my face. I'm using XMPP (with a GMail account, but this shouldn't matter) and want to chat with someone using Ubuntu and Pidgin 2.6.6 (she has a webcam which seems to work correctly)
    In the "Voice/Video settings" plugin, there are three options in the field Video → Input → Plugins : "default", "Test Input" and "Video4Linux" (and only "default" in the field Device, for the three plugins)
    "default" and "Video4Linux" give
    (21:03:34) Error with your webcam
    (21:03:34) Conference error
    (21:03:34) The call has been terminated.
    as soon as I try to start a video call, and "Test Input" only shows me a test pattern (but I guess this is the meaning of "Test Input" )
    BTW, I wonder why there is only "Video4Linux" and not "Video4Linux2"
    The Pidgin's FAQ says this
    How do I configure my microphone/webcam?
    Currently, the command-line gstreamer-properties program is used. This is only available on GNOME-based systems. On other systems, Pidgin makes its best guess as to which device to use. A plugin is planned to support this functionality on other systems.
    But I don't use GNOME, my desktop environment is LXDE.
    What could I do to make my webcam work with Pidgin?
    Thank you!
    Edit:
    - my system is up to date
    - I have farsight2 and gstreamer0.10-{good,bad,ugly} installed
    Fractal
    Last edited by Fractal (2010-06-13 15:50:01)

    Well, the problem is not really solved actually.
    Pidgin recognizes my webcam but I still cannot open a video chat.
    When I try to start a video chat, the following errors are displayed in the debug window :
    (17:38:41) mediamanager: gst pipeline error: Could not encode stream.
    (17:38:41) mediamanager: Debug details: gstx264enc.c(737): gst_x264_enc_header_buf (): /GstPipeline:pipeline0/GstBin:conf_0x306c000/FsRtpConference:fsrtpconference1/GstBin:discover_1_97/GstX264Enc:x264enc0:
    Unexpected x264 header.
    When the other person tries to call me, I have something like that :
    (17:43:23) jingle-rtp: received codec: 32: video MPV clock:90000 channels:0
    (17:43:23) jingle-rtp: received codec: 26: video JPEG clock:90000 channels:0
    (17:43:23) jingle-rtp: received codec: 97: video H263-1998 clock:90000 channels:0
    (17:43:23) jingle-rtp: received codec: 34: video H263 clock:90000 channels:0
    (17:43:23) jingle-rtp: received codec: 98: video DV clock:90000 channels:0
    (17:43:23) jabber: setting param stun-ip for stream using auto-discovered IP: 209.85.229.126
    (17:43:23) jabber: setting param stun-port for stream using auto-discovered port: 19302
    (17:43:23) mediamanager: Couldn't read fs-element.conf: No such file or directory
    (17:43:23) backend-fs2: Couldn't read fs-codec.conf: No such file or directory
    (17:43:23) backend-fs2: Creating hash table for sessions
    (17:43:23) backend-fs2: connecting pad: success
    (17:43:23) backend-fs2: Creating hash table for participants
    (17:43:23) media: Creating hash table for sessions
    (17:43:23) gtkmedia: state: 0 sid: video-session name: (null)
    (17:43:23) jingle-rtp: state-changed: state 0 id: video-session name: (null)
    (17:43:23) backend-fs2: got new local candidate: 1
    (17:43:23) backend-fs2: got new local candidate: 1
    (17:43:23) backend-fs2: farsight-component-state-changed: component: 1 state: GATHERING
    (17:43:23) backend-fs2: farsight-component-state-changed: component: 2 state: GATHERING
    (17:43:23) jingle-rtp: jingle_rtp_codecs_changed_cb: session_id: video-session jingle_session: 0x212b6a0
    (17:43:23) jingle-rtp: jingle_rtp_candidates_prepared_cb
    (17:43:23) jingle: jingle_iceudp_finalize
    (17:43:23) jingle: jingle_transport_finalize
    (17:43:26) backend-fs2: farsight-send-codec-changed: codec: 96: video THEORA clock:90000 channels:0 delivery-method=inline
    (17:43:27) jingle-rtp: stream-info: type 1 id: video-session name: (null)
    (17:43:27) jingle-rtp: stream-info: type 1 id: (null) name: (null)
    (17:43:27) backend-fs2: farsight-component-state-changed: component: 1 state: CONNECTING
    (17:43:27) backend-fs2: farsight-component-state-changed: component: 2 state: CONNECTING
    (17:43:36) backend-fs2: farsight-component-state-changed: component: 1 state: FAILED
    (17:43:36) backend-fs2: farsight-error: 108: Could not establish connection
    (17:43:36) backend-fs2: farsight-component-state-changed: component: 2 state: FAILED
    It seems that my Pidgin want to encode the flux in H264 and the other wants Theora
    Fractal

  • I can not purchase from the iTunes store because of the security question I am I do not know your security question and alternative mail has been hacked

    I can not purchase from the iTunes store because of the security question I am I do not know your security question and alternative mail has been hacked

    You need to contact Apple. Click here, phone them, and ask for the Account Security team.
    (87808)

  • The App Store want allow me to download new apps because I have not set up security questions.But I share an iTunes account with my friend. So if I set up the questions will my friend have to use and answer the same thing?

    The App Store want allow me to download new apps because I have not set up security questions.But I share an iTunes account with my friend. So if I set up the questions will my friend have to use and answer the same thing?

    They will have to be answered the first time when purchasing from a new computer or device.

  • I imported different trips to different catalogs on different external hard drives.  Later renamed external HDs.  I want to combine catalogs and have my source (NEF) files all together on one drive.  I'm not really sure how to get those source files back

    I imported different trips to different catalogs on different external hard drives.  Later renamed external HDs.  I want to combine catalogs and have my source (NEF) files all together on one drive.  I’m not really sure how to get those source files back and get rid of the extra long path to where the source files are now located. If I re-link files to their current catalog (many different paths to files in same catalog) can I merge (import catalogs) into one master catalog?  Will the new (Master catalog) have the correct link to the source file?  If not, how or can this be done?
    I have tried to explain my situation as clearly as I can.  Do you understand my situation?
    This maybe something you don’t have time to help me with.  If not can you suggest somewhere I can get an answer?  I really need help.  PLEEEZZZ HELP ME.
    Bruce Schuerman
    Norman, OK
    405_514-4875 (call collect)
    [email protected]

    Is there any solution (other than buying
    I really think 'buying' is the best solution on this one.  Ideally, you would have at least five internal hard drives.
    System
    Projects
    Cache/Scratch
    Media
    Exports
    Use externals and network drive only for backup.

Maybe you are looking for