Not receiving emails after ICS upgrade

I recently upgraded to ICS and since then, I haven't been receiving e-mails to my phone like I should. Nothing has changed about my email account that should prevent the emails from being received on my phone. Anyone else have this problem?

You Might Try Clearing the Cache Partition. Or go into you individual Mail's and Clear the Cache and Data as they could be stuck a little after the Update:
These are the Instructions on Clearing the Cache Partition: For Razr & Razr Maxx
Top Alternate method
Power the device off.
Press the Power button then select Power off.
If the device doesn't respond to input, press and hold the Volume Up / Down then press and holdPower button. When the device screen goes blank release the Power button while continuing to holdVolume Up / Down, proceed with step 3.
Press and hold the Volume Up / Down then press the Power button.
When presented with the Boot Mode Selection Menu release all buttons.
Press Volume Down to select Recovery then press Volume Up.
From the Droid triage screen, simultaneously press Volume Up / Down.
Select Clear the Cache Partition then press the Power button.
Select reboot system now then press the Power button.

Similar Messages

IMessage for Mac not receiving messages after ios8 upgrade

I recently updated my iPhone 5 to iOS8, however, after doing this my Macbook Pro now does not receive iMessages and is unable to send them. Can anyone give me some help to get the iMessages on the mac working again? Thanks.

Hey DenholOliver,
Thanks for the question. I understand that you are not receiving iMessages on your MacBook Pro since updating your iPhone 5 to iOS 8. Let’s check to see that your phone number and Apple ID are setup correctly on both of the devices:
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Thanks,
Matt M.

Mail not receiving emails after being delivered on iphone (still on server)

Mail is not receiving all of my emails once they have been delivered on my iphone. It seems to do this selectively. I logged into my account on the web and the emails are still there (as I have not requested emails to be deleted form the server). Please help!

On the G5, Not certain, but this can fix myriad Mail problems...
Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these folder & file to the Desktop.
Move this Folder to the Desktop...
/Users/YourUserName/Library/Caches/Mail/
Move this file to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index
Reboot.
If that doesn't do it and you can afford to redo all your Rules, try these & reboot...
/Users/YourUserName/Library/Mail/MessageRules.plist
/Users/YourUserName/Library/Mail/MessageRules.plist.backup

Can not receive email after upgrading to 5.0.1

iPhone does not fetch the email from server automatically after upgrading to 5.0.1 . I need to use mail APP in order to get my emails. what are the possible fixes for this issue ?

Got it to work after going around in the loop for a couple of clicks

LG Ally will not receive email after 2.2 update

Does anyone know if they have the email problem fixed with the LG Ally after the 2.2 update? They told me it was a technical issue with the update and Embarqmail and that they would have to find a fix for it. So in the meantime they have sent me a new phone and told me not to update it to 2.2 until they have a fix for the Embarqmail problem. I would really like to upgrade to 2.2 so that I can start using some of the apps and games that I won't run on 2.1.

I would be surprised that the v2.3 update has done this. None of my Canon inkjets are showing the same symptom after running the update, although I don't have any machine as old as your i860. Personally I think that your print head could be the cause and the update timing is a coincidence. With a faulty print head, you would get no output even then though your supply levels still show the black ink as full.
I suggest you try a nozzle test. If you open Print & Fax, select the i860 and then click Options & Supplies, you should see a Utility tab. Select this and click Open Printer Utility. Then select the i860 and press the Maintenance button. Change the menu to Test Print and then select Nozzle Check. This will print a page and show you if all the inks are working. I would expect the black not to appear on this printed sheet. If this is so, you can then change the menu to Cleaning and click the Cleaning button. Do another nozzle test. If the black still does not print, then try doing Deep Cleaning.

Apple Mail not receiving emails after OS X update 10.6.7

Hello,
I have a strange problem. Apple mail has stopped receiving incoming messages after I did a software update of OS X 10.6.7. Outgoing mail is working fine.
Funnily enough the same settings are still working on my Iphone where I continue to receive incoming email.
I performed a rebuild on the mail and have done a combo update as well without any success.
Please help!!
Thank you

My problem was resolved using this..
http://support.apple.com/kb/TS3103
Thank you.

TS3276 why can I sometimes not receive emails after sending pictures/attachment?

What is the function of 'recovered messages? Sometimes I can't delete them and as long as they remain, I can't receive any other messages.

Hello Michael Levin
There are multiple options when saving attachment and I have highlighted them below.
Mail (Mountain Lion): View, save, and delete attachments
http://support.apple.com/kb/PH11771
Save an attachment
Do one of the following:
In the message header area, click Details, and then click Save. Choose an attachment or Save All, and then specify where to save the attachments.
Choose File > Save Attachments and select a location.
Drag the attachment to your desktop to save it there.
Regards,
-Norm G.
<Edited by Host>

After accepting the carrier update yesterday my iPhone 5s will not receive emails via my work Exchange system.

After accepting the carrier update yesterday my iPhone 5s will not receive emails via my work Exchange system. I can send emails, but can not receive. I deleted my account and added it back with the directed provided by our Corporate IT, but I still can't receive emails. I've hard booted and soft booted my phone several times to no avail. What else can I do to help remedy this situation?

I don't have any other email accounts on my phone and I don't get any type of error message. It just says "Checking for Mail" and I receive nothing, so I know that it is accessing my work email system. I haven't made any changes to my account. I only accepted the message to update my carrier system.....I do have an appointment with the local Verizon store to see if they can help.
Just FYI, my Exchange email account still works on my iPad, so I'm pretty sure the settings are correct.

Cannot receive Charter email after OS6 upgrade

Anyone have a similar problem? I can send but not receive email since I updated the OS. My wife's iPad email works fine (I wanted to successfully update my iPad before updating hers). My email also works fine on my laptop via web interface. I have checked and compared each setting between my wife's iPad email account and my iPad email account and have not found anything that did or could have changed with the OS update. My Gmail email account works fine on my iPad. Any suggestions?

Thank you all for reading and at least considering my problem. FYI, I decided to try deleting my email account on my iPad and reconfiguring. It worked perfectly - all of the email messages restored - along with the ability to receive email messages. No better explanation, but the problem is solved.

After ICS upgrade Phone is very slow to make a call

After ICS upgrade , when I select a contact to call , and then press cell or home , the response time is very slow.
I have pressed the call button more than once thinking it did not take. Then when it does take I end up calling the person
more than once because it has buffered the calls . What can be causing this ?
If you have an answer Please email me at: Personal email address removed to comply with VZW ToS< Thanks
Message was edited by: Verizon Moderator

Mine and my wifes thunderbolts have become horrible since the upgrade was pushed. Apps are slow, or don't even load some times. Trying to make a phone call is sluggish and at times it will try to call twice at the same time for some reason.
however, i overlooked all of this because i liked the look of ICS. then last week after being pushed two updates in a row, it now will just turn off at random times. i can't even go to a webpage anymore because it will immediately crash. better yet, when i try to reboot the phone, it will get to the point where it recognizes the verizon network, and then just shut off again. this happened to me 8 times in a row the other day. it will also say that the battery is in the red, even though it had a full charge before the crash.
i have found that if i plug my phone in and then boot it up, it will boot up correctly. that is the only way i have been able to get it to actually boot up since all of this started happening. it will still show the battery is about to die, and then about 15 minutes later it will show it is at 100% again.
i tried to do the chat with a reprensentative today and the guy was asking for my account password before he could look into my issue. what kind of company asks for a password. that is the dumbest thing i have seen. so now, i have a phone that "sometimes" works, and online chat that reminds me of a scamming site.
when my wife called to talk to someone they told her that it was htc's fault and that it would cost us $60 each to switch to new phones. how is that customer service? besides, verizon's network sent the update. there is no way that they can try to say it wasn't their fault. that isn't how the real world works.
i have reposted this from another thread, but since there seems to be someone from VZW reading this, perhaps some info can be found...

Can not receive mail after last sever update

After the last server update (9/26/05, Version 10.4.2), mail service no longer receives emails. I can only send email via Squirrel Mail cut cannot receive; cannot receive or send emails via mail client (i.e., Outlook Express).
Any help you can provide is greatly appreciated.
Below is the message the sender receives when trying to email me.
This is the Postfix program at host localhost.
I'm sorry to have to inform you that your message could not be
be delivered to one or more recipients. It's attached below.
For further assistance, please send mail to <postmaster>
If you do so, please include this problem report. You can
delete your own text from the attached returned message.
The Postfix program
<[email protected]>: host /var/imap/socket/lmtp[/var/imap/socket/lmtp] said:
550-Mailbox unknown. Either there is no mailbox associated with this
550-name or you do not have authorization to see it. 550 5.1.1 User unknown
(in reply to RCPT TO command)
Below is my postconf:
localhost:~ simon$ postconf -n
command_directory = /usr/sbin
config_directory = /etc/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
enableserveroptions = yes
html_directory = no
inet_interfaces = all
mail_owner = postfix
mailboxsizelimit = 0
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
messagesizelimit = 10485760
mydestination = $myhostname,localhost.$mydomain,localhost,mail.jeablau.com,mail.emdprep.com
mydomain = localhost
mydomain_fallback = localhost
myhostname = localhost
mynetworks = 127.0.0.1/32,192.168.1.108/32,207.70.169.221/32
mynetworks_style = host
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
relayhost =
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = postdrop
smtpdpw_server_securityoptions = login,plain
smtpdrecipientrestrictions = permitsasl_authenticated,permit_mynetworks,reject_unauthdestination,permit
smtpdsasl_authenable = yes
smtpdtls_keyfile =
smtpduse_pwserver = yes
unknownlocal_recipient_rejectcode = 550
virtualmailboxdomains = hash:/etc/postfix/virtual_domains
virtual_transport = lmtp:unix:/var/imap/socket/lmtp

Jeff,
Thanks for the help. It kind of fixed the problem. With your suggestions, I no longer receive the error message from the sender's end. However, I'm still not receiving email. Below is my postconf.
Your help is greatly appreciated.
command_directory = /usr/sbin
config_directory = /etc/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
enableserveroptions = yes
html_directory = no
inet_interfaces = all
mail_owner = postfix
mailboxsizelimit = 0
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
messagesizelimit = 10485760
mydestination = $myhostname,localhost.$mydomain,localhost,jeablau.com,emdpep.com,mail.jeablau.c om,mail.emdprep.com
mydomain = localhost
mydomain_fallback = localhost
myhostname = localhost
mynetworks = 127.0.0.1/32,192.168.1.108/24,207.70.169.221/32
mynetworks_style = host
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
relayhost =
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = postdrop
smtpdpw_server_securityoptions = login,plain
smtpdrecipientrestrictions = permitsasl_authenticated,permit_mynetworks,reject_unauthdestination,permit
smtpdsasl_authenable = yes
smtpdtls_keyfile =
smtpduse_pwserver = yes
unknownlocal_recipient_rejectcode = 550
virtualmailboxdomains = hash:/etc/postfix/virtual_domains
virtual_transport = lmtp:unix:/var/imap/socket/lmtp

Not receiving email? Check your modem/router!!!

Hi all. My Logoc board fried last week and server/mail server was offline for that time. Everything worked up to that point. When I got the server back from the genious bar with a new logic board mail and web refused to work. I could send email and surf the web but could not receive email or visit my website from outside my subnet. After 3 three days of checking and tweaking everything from D.N.S> to mail settings, firewall settings I decided to check my Modem. It is a 2wire 2701HGB. What I saw astounded me. All the firewall settings That had allowed the incoming connections no longer had the public I.P. back to my server. It had deleted it, on its own. So if you have has a similar problem check your modem. It could save you a lot of grief. Everything works just like it used to now.
Best,
emackiii

We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple.
If you aren't receiving the email to your rescue email account (and you've checked the spam folder on the account as well as the inbox, and tried clicking the reset link again) then you will need to contact iTunes Support / Apple in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699

User not receiving email / corrupt database?

Much like another recent post, I have a user that can not receive email the emails just sit in the queue.
The error on those messages is "[[email protected]]: temporary failure"
Here are the twists:
1) We had a power spike a couple of days ago. The user's UPS failed and his machine lost power completely. He rebooted and everything else was fine, but he has not received an e-mail since then.
2) When looking at the list of users on the Server Admin > Mail > Maintenance > Accounts screen, the list in the database stops at the person BEFORE this particular user. They're alphabetical, obviously, so everyone after this person are not listed at all - 13 total missing accounts.
The kicker is that the rest of us are still receiving e-mail normally!
Thoughts?!
Details:
Mac Xserve running 10.4.11
Dual 2GHz, and 2GB RAM
Keep in mind I am NOT a born tech person, have a mild to moderate comfort level with a command-line prompt, and no native intuition for any of this.
Thanks!
-Rita

I'm the consultant that fixed MNX04's server, but it took several attempts.
the Cyrus reconstruct command failed to resolve the issue, and even removing the user using cyradm, and re-creating them in Workgroup manager didn't fix the problem.
Pterobyte's mailbfr utility did the trick: mailbfr -f, wait awhile for the repair to run, and all was well.
I'm grateful for all the help pterobyte has given to people on this forum, but it concerns me a little bit that the Cyrus utilities built in to OS X server can't fix this sort of problem. (However, this is the first time I've run into a problem with OS X mail servers that the Cyrus reconstruct command couldn't fix.)

User not receiving emails regarding approval notifications

Hi,
SRM system has been upgraded to 5.0.
User is not receiving emails regarding Approval notifications. However, the user is able to view the SCs pending for his approval in his approval list.
I checked the transmission of the emails, the approval notifications are sucessfuly sent and the email of the user is correctly maintained. I tried resending the emails, and the user didnt receive emails even then.
Could be please advice what could the error.
Thanks
Hemanth

Hello Hemanth Kumar,
If approval mail:
- is correctly generated,
- you can see it in SOST transaction,
- request status in SOST is OK,
this means SAPconnect is working fine, so your problem does not come from SAP.
You have to check your STMP gateaway and your mail server.
Regards.
Laurent.

E6 (Belle) - Phone can sent but not receive emails

Hello,
I have set up a 2nd mailbox. The first mailbox functions fine. But with the second mailbox I can send, but not receive emails.
Has anybody an idea how to solve that?
Many thanks

One more try. The problem here is that I don't have hands-on experience with Belle. Some backtracking... I assume that
1) Your firmware is up to date.
2) Even manually syncing email doesn't work.
3) You are not seeing any error messages that would help us track down the problem.
I did a web search, and found other Belle users complaining about Gmail support, but mostly that push doesn't work reliably. Manually syncing (or polling every X minutes) still does. It's a long thread, but you might want to read http://discussions.nokia.com/t5/Messaging-Email-Browsing-and/E-mail-doesn-t-sync-automatically-after... in case any comments help you.
If none of that helps, try enabling logging. Within Nokia Email, I have a logging option under Settings -> Global Settings -> Log Output. It writes at least two files to Phone Memory -> Logs. In my case, one file logged only GUI calls...and so was useless, and the other file was always empty. (A third file applied only to Mail For Exchange.) But give it a try and check the files later for references to Gmail or IMAP. Read them from a computer if that helps, and then post any relevant portions here. Also turn off logging when you're finished.
Again, good luck!

Not receiving emails after ICS upgrade

Similar Messages

Maybe you are looking for