Not receiving temp IPv6 address from router

I have spent the day trying to get IPv6 internet connectivity working in Arch and Im failing. No matter what I do my Arch install just isnt receiving and ipv6 temp address. If I use the exact same system but boot into another OS i automatically get an IPv6 temp address and can ping 1pv6.google.com .
If there is anything that might prevent this networking function from working Id appreciate to know what it could be. Thanks a lot.

I wont consider this solved until auto config works but in the mean time I have an ugly work around. I created a profile for eth0 to come up at 0.0.0.0 and I got static ipv6 working in my bridge like this
INTERFACE="br0"
CONNECTION="bridge"
DESCRIPTION="Gigabit Bridge"
POST_UP="ip -6 route add default via fe80::c851:85ff:fed0:e71f dev br0"
BRIDGE_INTERFACES="eth0"
IP="dhcp"
IP6="static"
ADDR6=(2001:470:1f07:be8:bd9a:b66d:248a:b866/64)
Gateway6=fe80::c851:85ff:fed0:e71f
ADDR='192.168.11.66'
#ROUTES=('192.168.0.0/24 via 192.168.1.2')
#GATEWAY='192.168.11.1'
#DNS=('8.8.8.8')

Similar Messages

Clients not receiving DHCP IP address from HREAP centrally Switched Guest SSID

Hi All,
I am facing a problem in a newly deployed branch site where the Clients are not receiving DHCP IP address from a centrally switched Guest SSID. I see the client status is associated but the policy manager state is in DHCP_REQD.
The dhcp pool is configured on the controller itself. The local guest clients are able to get DHCP and all works fine, the issue is only with the clients in the remote site. The Hreap APs are in connected mode. Could you please suggest what could be the problem. Below is the out of the debug client.
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 Adding mobile on LWAPP AP 3c:ce:73:6d:37:00(1)
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 Reassociation received from mobile on AP 3c:ce:73:6d:37:00
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 0.0.0.0 START (0) Changing ACL 'Guest-ACL' (ACL ID 0) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1393)
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 Applying site-specific IPv6 override for station 10:40:f3:91:7e:24 - vapId 17, site 'APG-MONZA', interface 'vlan_81'
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 0.0.0.0 START (0) Changing ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1393)
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 Applying IPv6 Interface Policy for station 10:40:f3:91:7e:24 - vlan 81, interface id 13, interface 'vlan_81'
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 Applying site-specific override for station 10:40:f3:91:7e:24 - vapId 17, site 'APG-MONZA', interface 'vlan_81'
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 0.0.0.0 START (0) Changing ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1393)
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 STA - rates (8): 140 18 152 36 176 72 96 108 0 0 0 0 0 0 0 0
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 0.0.0.0 START (0) Initializing policy
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 0.0.0.0 START (0) Change state to AUTHCHECK (2) last state AUTHCHECK (2)
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 0.0.0.0 AUTHCHECK (2) Change state to L2AUTHCOMPLETE (4) last state L2AUTHCOMPLETE (4)
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 0.0.0.0 L2AUTHCOMPLETE (4) Plumbed mobile LWAPP rule on AP 3c:ce:73:6d:37:00 vapId 17 apVapId 1
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 0.0.0.0 L2AUTHCOMPLETE (4) Change state to DHCP_REQD (7) last state DHCP_REQD (7)
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 apfMsAssoStateInc
*apfMsConnTask_3: May 24 13:26:49.373: 10:40:f3:91:7e:24 apfPemAddUser2 (apf_policy.c:222) Changing state for mobile 10:40:f3:91:7e:24 on AP 3c:ce:73:6d:37:00 from Idle to Associated
*apfMsConnTask_3: May 24 13:26:49.373: 10:40:f3:91:7e:24 Scheduling deletion of Mobile Station: (callerId: 49) in 28800 seconds
*apfMsConnTask_3: May 24 13:26:49.373: 10:40:f3:91:7e:24 Sending Assoc Response to station on BSSID 3c:ce:73:6d:37:00 (status 0) ApVapId 1 Slot 1
*apfMsConnTask_3: May 24 13:26:49.373: 10:40:f3:91:7e:24 apfProcessAssocReq (apf_80211.c:4672) Changing state for mobile 10:40:f3:91:7e:24 on AP 3c:ce:73:6d:37:00 from Associated to Associated
*apfReceiveTask: May 24 13:26:49.373: 10:40:f3:91:7e:24 0.0.0.0 DHCP_REQD (7) State Update from Mobility-Incomplete to Mobility-Complete, mobility role=Local, client state=APF_MS_STATE_ASSOCIATED
*apfReceiveTask: May 24 13:26:49.373: 10:40:f3:91:7e:24 0.0.0.0 DHCP_REQD (7) pemAdvanceState2 4183, Adding TMP rule
*apfReceiveTask: May 24 11:35:53.373: 10:40:f3:91:7e:24 0.0.0.0 DHCP_REQD (7) Adding Fast Path rule
type = Airespace AP - Learn IP address
on AP 3c:ce:73:6d:37:00, slot 1, interface = 13, QOS = 3
ACL Id = 255, Jumbo F
*apfReceiveTask: May 24 13:26:49.373: 10:40:f3:91:7e:24 0.0.0.0 DHCP_REQD (7) Fast Path rule (contd...) 802.1P = 0, DSCP = 0, TokenID = 7006 IPv6 Vlan = 81, IPv6 intf id = 13
*apfReceiveTask: May 24 13:26:49.373: 10:40:f3:91:7e:24 0.0.0.0 DHCP_REQD (7) Successfully plumbed mobile rule (ACL ID 255)
*pemReceiveTask: May 24 13:26:49.373: 10:40:f3:91:7e:24 0.0.0.0 Added NPU entry of type 9, dtlFlags 0x0
*pemReceiveTask: May 24 13:26:49.373: 10:40:f3:91:7e:24 Sent an XID frame
*apfMsConnTask_3: May 24 13:26:49.401: 10:40:f3:91:7e:24 Updating AID for REAP AP Client 3c:ce:73:6d:37:00 - AID ===> 1
*apfReceiveTask: May 24 13:28:49.315: 10:40:f3:91:7e:24 0.0.0.0 DHCP_REQD (7) DHCP Policy timeout
*apfReceiveTask: May 24 13:28:49.315: 10:40:f3:91:7e:24 0.0.0.0 DHCP_REQD (7) Pem timed out, Try to delete client in 10 secs.
*apfReceiveTask: May 24 13:28:49.315: 10:40:f3:91:7e:24 Scheduling deletion of Mobile Station: (callerId: 12) in 10 seconds
*osapiBsnTimer: May 24 13:28:59.315: 10:40:f3:91:7e:24 apfMsExpireCallback (apf_ms.c:599) Expiring Mobile!
*apfReceiveTask: May 24 13:28:59.315: 10:40:f3:91:7e:24 apfMsExpireMobileStation (apf_ms.c:4897) Changing state for mobile 10:40:f3:91:7e:24 on AP 3c:ce:73:6d:37:00 from Associated to Disassociated
*apfReceiveTask: May 24 13:28:59.315: 10:40:f3:91:7e:24 Scheduling deletion of Mobile Station: (callerId: 45) in 10 seconds
*osapiBsnTimer: May 24 13:29:09.315: 10:40:f3:91:7e:24 apfMsExpireCallback (apf_ms.c:599) Expiring Mobile!
*apfReceiveTask: May 24 13:29:09.316: 10:40:f3:91:7e:24 Sent Deauthenticate to mobile on BSSID 3c:ce:73:6d:37:00 slot 1(caller apf_ms.c:4981)
*apfReceiveTask: May 24 13:29:09.316: 10:40:f3:91:7e:24 apfMsAssoStateDec
*apfReceiveTask: May 24 13:29:09.316: 10:40:f3:91:7e:24 apfMsExpireMobileStation (apf_ms.c:5018) Changing state for mobile 10:40:f3:91:7e:24 on AP 3c:ce:73:6d:37:00 from Disassociated to Idle
*apfReceiveTask: May 24 13:29:09.316: 10:40:f3:91:7e:24 0.0.0.0 DHCP_REQD (7) Deleted mobile LWAPP rule on AP [3c:ce:73:6d:37:00]
*apfReceiveTask: May 24 13:29:09.316: 10:40:f3:91:7e:24 Deleting mobile on AP 3c:ce:73:6d:37:00(1)
*pemReceiveTask: May 24 13:29:09.317: 10:40:f3:91:7e:24 0.0.0.0 Removed NPU entry.

#does the client at the remote site roams between AP that connects to different WLC?
#type 9 is not good.
*pemReceiveTask: May 24 13:26:49.373: 10:40:f3:91:7e:24 0.0.0.0 Added NPU entry of type 9, dtlFlags 0x0
#Does your dhcp server getting hits.
#Also, get debug dhcp message & packet.
#Dhcp server is not responding.
*apfReceiveTask: May 24 13:28:49.315: 10:40:f3:91:7e:24 0.0.0.0 DHCP_REQD (7) DHCP Policy timeout
*apfReceiveTask: May 24 13:28:49.315: 10:40:f3:91:7e:24 0.0.0.0 DHCP_REQD (7) Pem timed out, Try to delete client in 10 secs.

Station is not receiving an IP address from DHCP

Hello guys,
I have an ASA 5505 functioning as a router to connect to the Internet. Also, it is my DHCP server for my clients, and APs. When I connect my laptop to the ASA, I get an IP address and able to configure my WLC. The APs also receives an IP address from the ASA. However, when I connect to the AP wirelessly as a wireless client, my laptop is not receiving an IP address from the DHCP which is my ASA.
Here is my topology:
[3602i]--------[ASA5505]--------[WLC2504]
Here is my ASA config for my clients:
interface Vlan12
description *** DEFAULT GATEWAY FOR Wi-Fi GUESTS
nameif GUESTS-if
security-level 100
ip address 10.2.12.1 255.255.255.0
dhcpd address 10.2.12.100-10.2.12.131 GUESTS-if
dhcpd dns 208.67.222.222 208.67.220.220 interface GUESTS-if
dhcpd lease 1048575 interface GUESTS-if
dhcpd option 3 ip 10.2.12.1 interface GUESTS-if
dhcpd enable GUESTS-if
Here is the WLC interface config:

Hello jsnyder81,
I have another question. This is still related to the same network.
I am able to connect to the wireless network now, and receiving IP address from the ASA 5505; however, I can only ping my wireless gateway. I also don't have access to the Internet.
When I hard wired my laptop to the ASA's switch port, I am able to browse the Internet, but not via WiFi.
Here is the routing table that I have on the ASA:
Gateway of last resort is 192.168.1.1 to network 0.0.0.0
C    10.2.8.0 255.255.255.0 is directly connected, PRINTERS-if
C    10.2.9.0 255.255.255.0 is directly connected, FIOS-if
C    10.2.10.0 255.255.255.0 is directly connected, IP-CAMERAS-if
C    10.2.11.0 255.255.255.0 is directly connected, WiFi-USERS-if
C    10.2.12.0 255.255.255.0 is directly connected, GUESTS-if
C    10.2.13.0 255.255.255.0 is directly connected, WIRED-if
C    10.2.3.0 255.255.255.0 is directly connected, EXSi-if
C    10.2.4.0 255.255.255.0 is directly connected, AD/NPS/CA-if
C    10.2.5.0 255.255.255.0 is directly connected, inside
C    10.2.6.0 255.255.255.0 is directly connected, WLC-if
C    10.2.7.0 255.255.255.0 is directly connected, AP-if
C    10.2.20.0 255.255.255.0 is directly connected, WIRELESS-PILOT-if
C    10.2.21.0 255.255.255.0 is directly connected, WIRED-PILOT-if
C    10.2.22.0 255.255.255.0 is directly connected, SERVERS-PILOT-if
C    192.168.1.0 255.255.255.0 is directly connected, outside
d*   0.0.0.0 0.0.0.0 [1/0] via 192.168.1.1, outside
I also have this command:
same-security-traffic permit inter-interface

OS X 10.6.7 not getting reserved DHCP address from router.

I have a MacBook Pro running OS X 10.6.7
My router is NetGear WGT624v3. I have the router setup to assign out reserved DHCP address for my Macs.
I am not getting the reserved address, but rather "any" address in the pool.
Other types of devices are getting the reserved address. For example, old windows computers, and my Android phone. Only the Mac computers seem to be getting the incorrect addresses.
Any ideas please?
Duane

As long as it shows up in the Windows Boot Camp control panel I'd say fine, happened to a lot of people - I have not had Windows 7 show in Mac Startup Disk control panel for years in my Mac Pro.

Mail 4.5 does not receive 2 email addresses from friends

Why cann't I receive 2 of my friends email but I can receive on my other Mac Mail account? I have OSX 10.6.8 & Mail 4.5!

Have you tried rebuilding the mailbox?
select the mailbox you want to rebuild (your inbox or custom malbox you created)
click on mailbox in the menubar
select rebuild
If you have a lot of email in the mailbox it might take a little time to finish
I did this when I was no able to see all of my emails and it worked like a charm!

WIFI stopped working after I woke the computer up, now says connected to the network but not the internet, all other coputers and devices connected still with no problems, have pinged IP address from router and got the message "4 packets sent none receive

Hi,
WIFI stopped working after I woke the computer up, now says connected to the network but not the internet, all other coputers and devices connected still with no problems, have pinged IP address from router and got the message "4 packets sent none received"... Help
I have tried network diagnostics which doesnt help... The only other ting is, when I woke the computer up it said tat another device was using my IP... My wife had plugged her phone into the computer to charge etc but even when i turn wifi off on the phone there is no change... also in settings on the phone the IP address is different...

The answer to your question is - neither!
Your PC should to configured to obtain an IP address automatically, and to obtain DNS server IP addresses automatically, from the Airport Express. This is the way Windows (and Macs for that matter) are configued by default, and that is the way most people have their computers set up. If you manually configured your PC's IP address to be the same as your wife's Mac, it certainly explains why your PC is not able to access the internet.

Cisco E1000 wont connect to internet anymore - not getting DHCP ip address from Comcast modem

Very strange issue...
I have Comcast HSI and have been using my Cisco (Linksys) E1000 for about 3 years now. Bought it as a refurb.
My issue is that the E1000 is NOT receiving the DHCP info from my Comast modem.
The internet works when my laptop is directly attached to the modem; but when connecting the modem internet port
to the E1000 internet port it is NOT grabbing my ISP DHCP ip address thus no clients can broswe 'wired or wireless'.
I even updated the firmware and am starting to think its time to get a 'BRAND NEW' router as this makes NO SENSE!
I cannot release/renew as i have NO ip address to release. I have even tried to configure the E1000 as a static
using the ipconfig/all from when the laptop and modem was connected. Comcast says they see nothing on their end.
I also factory defaulted the router and redid the config to no avail.
Any help would be appreciated.
Solved!
Go to Solution.

You need to enable MAC address clone on the router to recognize the connection from your cable modem. The link below would tell you how to configure the router to work with a cable connection and how to do MAC address clone.
Setting up a Linksys router with Cable Internet service

I am trying to create my Apple ID, but not receiving the verification link from Apple,. I get the email but NOT the link,. any suggestions

I am trying to create my Apple ID, but not receiving the verification link from Apple,. I get the email but NOT the link,. I have triple checked my email address and all Apple account info, all of which are correct. Any suggestions?

Where are you trying to create it?
Go to appleid.apple.com and create it there. Type the country name in the space and a dropdown should appear. Nigeria is clearly available there.

TS4002 Not receiving emails w/ attachments from a few of my existing contacts

This is a problem I just started having in the last couple weeks! I am not receiving emails w/ attachments from two of my every day mail contacts. Both of these people are with different organizations with different email accounts. If they send me an email without an attachment I receive it, but when they send one with an attachment, I don't even get a notification that they TRIED to send it! I have missed multiple emails from important business clients and my realtor! I have received hundreds of emails from these clients over the last 3 years. The attachments are simple PDF files so I know they are not exceeding the limit. They do not show up on the iCloud site, in my Mail app, or on my iPhone.
I have had several other contacts send me attachments which I receive as expected.
I have an @me.com account. Have had no complaints until now.
Any help?

Hi Tattoosleeve,
I suggest double check the Anti-Spam configuration if you have enabled it. More details in the following link:
http://technet.microsoft.com/en-us/library/aa997242.aspx
Did the customers get NDRs when they can't send to your org? If yes, please paste the details without sensitive information for the further troubleshooting.
I want to double confirm your Exchange server version. If you are using Exchange Online, I suggest contact Exchange Online Forum for help so that we can get more professional suggestion. For your convenience:
http://social.technet.microsoft.com/Forums/msonline/en-US/home?forum=onlineservicesexchange
Thanks
Mavis
Mavis Huang
TechNet Community Support

When I try to use the Vision Acquisition vi, I get an error message saying that " The system did not receive a test packet from the camera."

Error -1074360271 occurred at IMAQdx Start Acquisition.vi
NI-IMAQdx: (Hex 0xBFF69031) The system did not receive a test packet from the camera. The packet size may be too large for the network configuration or a firewall may be enabled.

Bruce Ammons wrote:
Did you try disabling test packets? I know Basler cameras have a "Enable Test Packets" setting buried in Advanced Network settings or something like that. You have to change the setting in MAX to show all settings instead of just acquisition, then locate the setting. I have been told regularly that the setting must be turned off for Basler cameras to work properly. Perhaps your camera has the same setting and the same requirement.
Bruce
A very specific firmware revision for certain Basler cameras had an issue where the test packet would not be sent for certain packet sizes and certain specific conditions, causing a false report of a test packet failure when a normal acquisition would in fact succeed. However, this was fixed in later firmware revisions and I have never seen a similar issue on any other types of cameras.
Aside from this specific case, if a test packet fails, it generally means an acquisition will as well. Given that Pleora's software can acquire, we can rule out networking topology and hardware, assuming you are using the same packet size as the Pleora software is. The only other thing that would seem a likely candidate would be a software issue like a firewall or some other filter driver that is interefering with IMAQdx receiving the data.
Eric

Airport extreme not receiving an ip address

Hey i was wondering if anyone knew why my airport extreme is not receiving an ip address. Im connected to the internet through a cable modem connected to a airport extreme. I know the internet works because when i connect directly to my macpro book the internet works fine.......its just when i try to use my wireless network. Also its not my wireless card in my laptop because it works fine with other wireless networks. The other thing is i know my airport extreme works because it will connect for a while and then it wont connect at all until i reset everything (modem, computer, airport).....any suggestions?
I called apple support and they said it was a comcast problem and comcast said it was a problem with my airport extreme......figures huh?
macpro book 15" Mac OS X (10.4.8)
macpro book 15" Mac OS X (10.4.8)

i think i found the answer while browsing the archives.
http://discussions.apple.com/thread.jspa?messageID=2202720&#2202720
sjones posted this:
FIXED!
Ok, after getting the usual run around with apple not being able to advise me about my ISP and my ISP not being able to advise me about apple some wonderful support person at my ISP let a bit of info slip: Comcast have decomissioned a load of bad DNS servers today.
If you use Comcast and cannot connect via wireless try this:
Open applications/utilities/airport admin utility
select your base station
click configure
click internet
whatever is typed into the dns servers input boxes, delete it
update your base station
and you are connected to the internet.
It makes perfect sense if you have this problem. You base station has been trying to connect to the WAN using a decomissioned dns server. All Comcast dns servers are now distributed dynamically via the dhcp server.
I am working again! Hope you are too.
I tried it, and was able to connect to my mini-mac for the first time. Phew! Now, I'm going to try the printer and my powerbook. I hope my tinkering with those does not tamper with the delicate balance of the universe.
Sjones, if you see this, THANK YOU!
Power PC G4 & Mac Mini Mac OS X (10.4.3)

Rates being redetermined. Form not received for delivery 0040008146 from 00

Hi ! All,
I m creating a Export Proforma Invoice ( It is a copy of Billing Type JEX ) with respect to a delivery , I am getting the following error-
Rates being redetermined. Form not received for delivery 0040008146 from 0000000012
Message no. 8I642
Diagnosis
Excise rates are being re-determined. This is becuase you have not received the Concession form for the delivery document & yet from the customer &
System Response
System will apply the normal excise duty rates and generate an excise invoice
Procedure
In case you have forgotten to record the receipt of the Forms please do so in Forms tracking for the Sales order and delivery.
Please analyse and let me know what is possible solution.
Regards,
Ashutosh

I feel the process what you had narrated itself is wrong.
It seems some zee table is developed wherein, the users should maintain data related to some concession forms which I feel should be applicable to domestic sales.
Apart from the above, for exports, I dont know why you were generating proforma copying billing type JEX. You were supposed to copy F5 (order related proforma) or F8 (delivery related proforma).
Since in your case, you have indicated that you have generated against a delivery, you should copy F8 billing type and maintain copy control accordingly in VTFL.
Last but not least, the message number also seems to be not a standard one.
thanks
G. Lakshmipathi

I have forgot my I pad In saudi airlines SV883 , on 09-09-2012, then I have immediate inform them but not received any feed back from their side, please advise and protect my Ipad.

Dear Sir,
I have forgot my I pad In saudi airlines SV883 , on 09-09-2012, then I have immediate informed them but not received any feed back from their side, please advise and protect my Ipad.
LOCATION : SAUDI ARABIA. DAMMAM - I have travelled from KOZHIKODE TO DAMMAM.
I HAVE KEPT MY IPAD SEAT POCKET#42H, ,
I have tay it several time thru ICloud still it's in offline.
Saudi air lines customer support services not responding properly,
You are requested to protect my IPAD and advice for the next.
* Can I get back up files from that IPad.,
waiting for your prompt reply as soon as possible,
best regards,
ZAMEER MAIDANI
<Personal Information Edited By Host>

This is a user-to-user technical support forum. We can't do anything to "protect" your iPad. If your files are backed up (and only you would know if so and where) you should be able to access them from your back up.
Did you have Find My iPad enabled?

I can not receive files via bluetooth from other external devices

I can not receive files via bluetooth from other external devices nokia, samsung and other than apple. I can send files to them but not receive. What is the problem?

I sucessfully transfered files from my Nexus4 to MBP via Bluetooth
1. Go to system preference and select Sharing.
2. Check the Bluetooth sharing.
3. Specify directory to which you want to recieve files from Blue tooth device.
4. Turn Blue tooth off and make it on.
Your MBP is now ready to recieve files from Andoriod phone.

I am not receiving security rest question from apple

i am not receiving security rest question from apple, i need to buy some app. please help

Read here > Apple ID: All about Apple ID security questions
If necessary
1) See Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...
2) Or Email Here > Apple Support iTunes Store Contact
Note:
You can only set up a Rescue Email BEFORE you forget the questions/answers.

Not receiving temp IPv6 address from router

Similar Messages

Maybe you are looking for