NOT RECEIVING THE COMPLETE DIALED STRING FROM AN ISDN TRUNK PBX - AS5850

Hi
The problem i'm facing is the next:
I have a Cisco AS5850 with an Euro ISDN trunk connected to a PBX. The pbx send out the calls in order the A5850 terminate these calls in a remote gateway. I receive only a maximum of 12 digits of the complete string dialed in a phone hooked up in the PBX side.
Is it normal to receive only a max of 12 digits or there is something to do to receive as much digits as those come from the PBX??
My dial-peer looks like this:
dial-peer voice 13 pots
incoming called-number 0T
destination-pattern 0T
direct-inward-dial
port 2/7:D
dial-peer voice 14 voip
destination-pattern 0T
session target ipv4:209.210.174.17
tech-prefix 1051
fax rate 9600
fax protocol t38 ls-redundancy 2 hs-redundancy 2 fallback none
and the output from the debug dialpeer is this:
1w4d: destination pattn: 1234567891 expanded string: 1234567891
1w4d: MatchNextPeer: Peer 7 matched
1w4d: MatchNextPeer: Peer 8 matched
1w4d: dpMatchPeersMoreArg: Result=0 after MATCH_ORIGINATE
Thanks in advance for your help!
Oscar

Do a debug isdn q931 and see what comes in from the PBX. Post it here so we can see. They could be sending the digits using overlap sending , so the intial setup may not have all the digits that you want or need.
Also, your VOIP and POTS dial peers have the same destination pattern. There is nothing stopping an inwards ISDN call from being hairpinned back out the PRI if it has a leading 0. You might want to make your dial plan a bit more specific.

Similar Messages

Not receiving the verification e-mail from Apple

I wonder if anyone can help me. For some reason, I never receive the verification e-mail for my Apple ID, I receive other e-mails from Apple OK but not the verification one, which means that I cannot set up Facetime on my iPad.
Any suggestions how to get past this please ?
Thanks in advance
Tony

You've checked your spam/junk folders?

Not receiving the output xml file from BPM

Hello
I am doing a scenario where I'd be sending two files in text format to the BPM workflow which would be using Fork and Correlation to merge these two files into one file and send the output xml file as receiver. Problem is that the two files are successfully converted into the xml messages and are displayed in SXMB_MONI but the output file which would be received from BPM engine as receiver is not being generated and displayed in SXMB_MONI as well as RWB. Please suggest any probable solution.
Thanks.

I don't think you can manipulate .ai files in Flex /
AIR.

Using Firefox 3.6.20 and Windows XP Home SP3. Firefox sporatically deletes bookmarks from the bookmarks toolbar. Additionally, when I try to import from a saved HTML file, Firefox does not import the complete file. Results are inconsistent.

Using Firefox 3.6.20 and Windows XP Home SP3. Firefox sporatically deletes bookmarks from the bookmarks toolbar. Additionally, when I try to import from a saved HTML file, Firefox does not import the complete file. Results are inconsistent.

A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

I believe I have implemented it correctly but I am not receiving the notifications on my phone. I have an ad hoc provisioning profile set up. I have the device token from the phone through NSLOG to console. I have the dot net code running without errors.

I believe I have implemented it correctly but I am not receiving the notifications on my phone. I have an ad hoc provisioning profile set up. I have the device token from the phone through NSLOG to console. I have the dot net code running without errors.The notifications just don’t appear.
Any ideas where I am going wrong?

IMAP account access by itself does not provide for syncing contacts, calendar events, and notes or anything over the air. This is possible with an Exchange account accessed via ActiveSync with the Exchange Server.
If your company email account is an Exchange Account, your company's IT Dept. has enabled IMAP account access for your Exchange account on the Exchange server?
If an Exchange account, the IT Dept. must have ActiveSync enabled for your account on the Exchange Server to create and access the account as an Exchange account which provides Push access for received messages, and over the air syncing for contacts and calendar events with the Exchange Server.

I am trying to create my Apple ID, but not receiving the verification link from Apple,. I get the email but NOT the link,. any suggestions

I am trying to create my Apple ID, but not receiving the verification link from Apple,. I get the email but NOT the link,. I have triple checked my email address and all Apple account info, all of which are correct. Any suggestions?

Where are you trying to create it?
Go to appleid.apple.com and create it there. Type the country name in the space and a dropdown should appear. Nigeria is clearly available there.

I bought and was charged for bingo chips in bingo bash and have not received the chips.. I can't get a response from bingo bash! How do I get my chips?

I bought and was charged for bingo chips in bingo bash and have not received the chips.. I can't get a response from bingo bash! How do I get my chips?

Welcome to the Apple Support Communities
If I have understood you properly, to do that, you have to create a new administrator user with your name and for your uses. Follow these steps:
1. Open System Preferences > Users & Groups, and press the + button to create a new administrator account.
2. When you have finished creating that user, open  > Log Out, and log in your new user.
3. Open System Preferences > Users & Groups, select the old user and press the - button to remove the user. If you want, you can select the option to remove the Home folder of this user, so you will only have the Home folder for your account

I bought some Coins from SKOUT app, but It did not receive the amount was withdrawn?

I bought some Coins from SKOUT app, but It did not receive the amount was withdrawn?

Contact iTunes support. http://www.apple.com/emea/support/itunes/contact.html

I'm not receiving the AppleId email when I hit Forgot my password, how do I fix this?

I can’t recall my password for a different iTunes Id and I’ve went to AppleId.apple.com, pressed the ‘forgot your password’ button, it brought me to a new page with my email, I’ve made sure that I was my email, I hit Email authentication, and then it brings me to a page that says: “ Email has been sent”, but I’m not receiving any email in my Gmail account. I’ve made sure that I have no filters for Apple or iTunes and checked my Spam, and Trash folders and I see nothing.

Hi CoalBeans,
Welcome to the Support Communities! The resource below explains what to do if you do not receive the verification email for your Apple ID.
If you didn't receive your verification or reset email - Apple Support
http://support.apple.com/en-us/HT201455
When you make certain updates to your Apple ID, we’ll send you an email to help you complete the update. For example, you might have reset your password, reset your security questions, or added a new email address to your account. If you can't find the email after we send it, these steps can help.
Search for the email
We'll send the email from "Apple," so you can quickly search for it. If it isn't in your inbox, check your folders. If a spam filter or email rule moved the email, it might be in the Spam, Junk, Trash, Deleted Items, or Archive folder.
Make sure you're checking the correct email account
If you're looking for a password reset email, make sure you're checking the correct email inbox. It will either be your primary Apple ID email address or a separate rescue email address that you added to your account.
If you're looking for a verification email, you can sign in to My Apple ID and review all the email addresses you have on file, including the one that you're trying to verify. If the email address is incorrect, you can update it and send another verification email.
Resend the email
To resend a reset email, repeat the steps to reset your password or security questions, and we'll send an email to your rescue or primary Apple ID email address.
To resend the verification email, go to My Apple ID, select Manage your Apple ID, then sign in. Click Resend next to the email address that you want to verify, and we'll send an email to that address.
Make sure that you're getting email
If you're not getting any email, you might need to contact your email service provider for help. You can also use these steps to get help receiving email at OS X Mail or an iCloud email address.
Contact us
Go to System Status and see if Apple ID is available. If you still can't find the reset email or verification email, contact Apple Support.
Last Modified: Jan 5, 2015
Manage your Apple ID primary, rescue, alternate, and notification email addresses - Apple Support
http://support.apple.com/en-us/HT201356
Cheers,
Judy

I am trying to reset my security questions, but I have not received the email with instructions. What is the problem?

I initially created my apple account years ago. I am trying to reset my security questions because my answers are continually incorrect. I pressed the link that sends reset security questions info to my alt. address, but I have not received the email with instructions. I have resent the email several times and checked both of the emails I have set up with my apple account to no avail. I have tried everything that is provided in the support article about the issue and my problem has not be resolved. I've even deleted my alt email from the apple account and then reassigned it and tried again, however, I still have not received the email. Without knowing the answers to my security questions, I cannot purchase anything from the iTunes store, which I have been trying to do.
I do not know what the problem is and I am asking for any resolutions. Please and thank you!

Go to the Apple ID Security site from http://support.apple.com/kb/HT5699 or call the AppleCare support number from http://support.apple.com/kb/HE57 and ask to speak with the Account Security Team...either can help you reset your questions/answers.

Does not accept the completion of the process of buying

Does not accept the completion of the process of buying
is the answer to
Your purchase could not be completed
For assistance .contact iTunes support at www.Apple.com

Hi Rander4,
Sorry i am just responding, I had to find out from the shop where I purchased the IPhone if it was jail broken and I ve now confirmed that it was not jail broken.
What could possibly be done?

My Revolution Not Receiving The Whole Text Message

Hello, lately I have been having a problem receiving the whole text message. People with smart phones text sometimes page length texts. I have no problem sending out page length text, but when someone sends me one, from many different companies and phone types, I only receive what the phone recognizes as the first part of the text message.
An Example is:
"Hello, I was wondering what you are doing later. I was thinking we could go to the shopping later at the mall. Do you ha"
I primary text people so when I do not receive the whole text it is very frustrating.

It's lies that you haven't received any other complaints on this issue. 1) because I have called repeatedly on this exact issue among many others with this phone and 2) here are some of about a dozen posts on this:
https://community.verizonwireless.com/message/876695#876695
and another:
https://community.verizonwireless.com/message/875860#875860
and another:
https://community.verizonwireless.com/message/875820#875820
granted some are recent, but if you search your forums you will see plenty.
You used to and still state that you never hear of any of the many issues with this phone, including when it would randomly reboot. Same phrase, "we have yet to hear of other cases with this device." Bull...
I too will be heavily considering leaving Verizon after over 10 years of being a customer not due to an LG phone sucking this bad, but your company's repeated refusal to acknowledge our concerns and treat us like we are ******.
Like your master reset phrase above. So you think that computing devices need a fresh start anytime something goes wrong is just not correct. If that were the case every time I have fragments between nodes in a clustered server environment I'm supposed to factory reset them?! NO, you debug it and get it working correctly! This issue is fragmenting withing your sms/mms delivery system, so fix it! As a sysadmin for a scientific super computing institute I guarantee I know more about computing devices than you ever will, and I can say your workarounds are asinine and only prolong your customer's issues with a clearly defective device.
As with this, although not your manufactured device, it is something you sell and therefore you debug these issues across your network or give those of us that can the ability to do so, but alas another locked boot loader and if we were to root the device to mitigate these issues then we screw our self by trying to help our self. It's always our fault, as we must have done something wrong.

LINQ to Entities does not recognize the method 'System.String ToString()'

Hi, i am working on MVC using LINQ query where i am heading a problem with LINQ Query. When I use following code
public ActionResult GetProduct()
Category p = new Category();
var all = db.Products.ToList();
// var catname = from i in db.Categories select i.CategoryID.ToString();
p.CategName = (from i in db.Categories select new SelectListItem {Value =i.CategoryID.ToString(), Text = i.CategoryName }).ToList();
var qq = (from i in db.Products join j in db.Categories on i.CategoryID equals j.CategoryID select new Product { ProductName = i.ProductName, UnitPrice = i.UnitPrice, UnitsOnOrder = i.UnitsOnOrder }).ToList();
p.Products = qq;
return View("GetProduct", p);
It throws an error
LINQ to Entities does not recognize the method 'System.String ToString(Int32)' method, and this method cannot be translated into a store expression.
kindly help to fix this problem.
Mayank Mani Pandey India

Entity Framework cannot convert ToString() to SQL. Create the object after you have fetched the results:
public ActionResult GetProduct()
Category p = new Category();
var all = db.Products.ToList();
// var catname = from i in db.Categories select i.CategoryID.ToString();
p.CategName = (from i in db.Categories select i).AsEnumerable().Select(x => new SelectListItem { Value = x.CategoryID.ToString(), Text = x.CategoryName }).ToList();
var qq = (from i in db.Products join j in db.Categories on i.CategoryID equals j.CategoryID select new Product { ProductName = i.ProductName, UnitPrice = i.UnitPrice, UnitsOnOrder = i.UnitsOnOrder }).ToList();
p.Products = qq;
return View("GetProduct", p);
Please remember to close your threads by marking all helpful posts as answer and then start a new thread if you have a new question.

I did not receive the serial number

I there, my adobe id is
[personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
[This is an open forum, not Adobe support, please do not post personal information]
I purchase the adobe education one for a year, but I did not receive any serial number so I cannot use the adobe app.

Hi there
Alreay solved
thank you!
Shuming lai
Original Message
Sender:John T [email protected]
Recipient:shuming [email protected]
Date:Thursday, Nov 20, 2014 11:12
Subject:[Adobe Creative Cloud] I did not receive the serial number
I did not receive the serial number
created by John T Smith in Adobe Creative Cloud - View the full discussion
Cloud programs do not use serial numbers... you log in to your paid Cloud account to download install activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
Some general information for a Cloud subscription
Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
http://www.adobe.com/products/creativecloud/faq.html
http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall
http://forums.adobe.com/community/download_install_setup/creative_cloud_faq
What it is http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html
Cloud Getting Started https://helpx.adobe.com/creative-cloud.html
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/6945928#6945928 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/6945928#6945928
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, "Stop Following"
Start a new discussion in Adobe Creative Cloud by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Have not received the online number yet!

I have purchased the online number for Germany on Friday, 7th Sept but I have yet not received the number! Its been almost 3 days and I have not received any notification. In the email I received from skype, it says usually it takes 6 hours!! Will there be any confirmation from Skype, when i will get the number?
thanks
Solved!
Go to Solution.

For Germany I have read that it may take up to two weeks. something to do with the German govt. Skype has no control over this. I am not german, but have read this on other threads,
If you found a post useful, please give Kudos. If it helped to fix your issue, mark it as a solution to help others.
Thank You!

NOT RECEIVING THE COMPLETE DIALED STRING FROM AN ISDN TRUNK PBX - AS5850

Similar Messages

Maybe you are looking for