Not recieved certificate

Hi all,
I cleared IZO-147 exam on 27th August 2009 but till not I could not receive the certificate. Could you suggest whom I should contact to get the status of it.
Regards
Salil Verma

Have a look at the fourth sticky in the certification forum:
Oracle Certification Program
It's a FAQ.

Similar Messages

  • Not recieved my shipment

    Hello Sir/Madam,
    I did not recieved my Oracle success kit yet, i gave exam on 30th April 2012 and passed successfully.
    I checked my pearson vue account and address was correct, any ways I have added some more info to the address now.
    I already raised SRs for this issue but did not get any response from Oracle Support- highly disappointed
    Can you please guide me what to do to get my success KIT.
    Waiting for your kind reply.
    thank you in advance.

    941537 wrote:
    Sorry..that was not my intention..I appologies...You do actually seem like a good fe-llow.
    I have registered on certview but unfortunately I am not able to find the exact navigation/path to track my shipment if it had earlier dispatched.
    It would be very helpful if you help me on that..
    Thanks and regards,The information on certview for this is found by:
    Goto: http://certview.oracle.com
    Press the sign in button
    Press the Certification Status Tab
    Press the Success kit Status TAB.
    You should seen a line like:
    BIGDELBOY      1st shipment      31-DEC-99      Oracle Power Objects Certified Associate -      Fra-tton Park Frogmore Road, Ports-mouth P-O-4 8RA
    The key item here is the shipment date ..... (31-DEC-99) It takes 6/8 weeks from that to get your shipment. In fact Oracle will not respond if your raise SR's before that date.
    ~~~~~~~~~~~~~~~~~~~~
    Now my understanding is that if Oracle has determined you need a reship:
    - They will send you an electronic copy immediately
    - THe will order you a reshipment:
    -- For some reshipments I assume that will appear in certview .... but it may take up to about a week to appear in certview. And up to 6/8 weeks to appear in your inbox.
    --For certain expedited ships they may no appear in certview.
    *Now: The the certview success kit (incl certificate) cannot be tracked via a D-H-L track-er or InsihMurrayPostlTracker whatever.  All you get is a shipment date (which I think personally is better thought of as the date the order way place with the success kit manufacture, not the date of post-ing.
    ~~~~~~~~~~~~~~~~~~~~~
    - (1) I suggest you wait a week after your electronic copy to see if any shipment appears in certview
    - (2) Although you received an electronc copy of your certificate for Oracle I remain unsure if all comminucations to you re getting though. I suspect the obfistication used to protect individual certification helpdesk staff may provoke some spa-m filters more than other communications.
    ~~~~~~~~~~~~~~~~~~~~~~~
    It may be after a week you feel you need to raise another SR.
    One key way on how to raise SR's effectively is suggested by Brandy here: {message:id=10266530} wher a candidate felt Oracle were not replying to him:
    My suggestion to you would be to submit a new SR, and reference one of your previous SRs, provide confirmation that your mailing address and other information are correct at Pearson VUE and in CertView, ask for your certificate to be reshipped  .... and let them know that you have not received any of their email communications. I would also suggest that you provide an alternate email address.
    Regards,
    Brandye Barrington
    Certification Forum Moderator~~~~~~~~~~~~~~~~~~~~~
    See also:
    {message:id=10323560}
    {message:id=10248752}
    {message:id=10271302}
    It is worth noting certview can also publish you credentials to third parties: It works something like:-
    You supply to certview 3rd party's email address and what you want published there:
    Third party gets email giving URL and credentials to viewthe certifications the you have permitted to be viewd.
    This should be suffient proof to a third party in lieu of a certificate.
    It is worth publishing the credential to yourslf once so you get practce as to how this works.
    Rgds -

  • If a group message doesn't completely go through, how can I see who did not recieve it?

    I tried to send a mass text message (note: I have group messaging turned OFF, but I just used the field where you can send the same message to multiple recipients), however, it came back saying that "Your message was not sent. Tap "Try Again" to send this message." I know that some people recieved the text, as they replied to it, however I'm fairly certain that one or two people did not recieve it. Is there any way to figure out who did not correctly get the message from within the app? Thanks.

    Change your password, alert your credit card company and itunes support.

  • Hi my Apple ID is block and iam trying to reset it but iam not recieving any email and I have forget my Security questation what should I do??????

    Dear Sir,
    My acccount ID [email protected] have been blocked for securety reason and it give me messege to reset my password but when I tying to reset by email iam not recieving anything in my email from apple and I already forget my security quastion could you please help what I have to do to reset my account
    Regards
    Arash Abedi

    Hi nadzpad,
    I'm sorry to hear you are having issues with your iPhone 6 Plus. I also apologize, I'm a bit unclear on exactly what you are seeing or describing. If you are being asked for a Restrictions password, you may find the following article helpful:
    About Restrictions (parental controls) on iPhone, iPad, and iPod touch - Apple Support
    If you are getting a message that you must turn off Find My iPhone before restoring from iTunes, then these articles may be more useful:
    iCloud: Remove your device from Find My iPhone
    Find My iPhone Activation Lock - Apple Support
    Regards,
    - Brenden

  • IDOC status on 03 but not recieved on target system

    Hi,
    We are recieving inbound idoc from external system and processing Inbound IDOC on SAP system, after processing inbound idoc on SAP we are sending status outbound idoc to external system.
    The above functionality was working fine before upgradation.
    after upgradation we have recreated RFC (TCP/IP) connection, updated at port level and also configured the new SAP system details ( sid, Hostname, service programsname...) on external system correctly.
    Now we are recieving inbound idoc from external system on upgraded system,after processing inbound idoc details on SAP system, generating outbound idoc from SAP and it reaching the outbound prot sucessfully on 03 status with green light.
    But external system is not recieving the IDOC. How to find why idoc is not reaching external system even though it is sucessfully passed at outbound port level with green light status 03.
    We have also checked the SM58 for TRFC entries but we didn't identified any entries on SM58. Please help us on this issue
    Thanks,
    Raju

    Hi Raju,
    As  mentioned by The specified item was not found., the one common problem for the IDocs not being sent might be a missing COMMIT WORK. I.e. when using the standard SAP API's for sending outbound IDocs, SAP actually creates the IDoc and registers an update function for sending the IDoc out. So without the COMMIT WORK, the IDoc usually exists on the database (implicit or database commmits), is in status 03, but hasn't been sent out and cannot be found in the outbound RFC queue (because SAP never tried to send it).
    If you're convinced that a COMMIT WORK is happening (and after trying to send the outbound IDoc) then I'd try the following: Replace the used RFC destination (or re-define it temporarily) with one that points to the same system from where you're sending. If you don't see the IDocs as inbound IDocs or in the outbound RFC queue, the sending never happens. (Ok, might be a moot point if you completely trust your external system, but usually it's good to even rule out the most unlikely causes - if it's simple.)
    So if this didn't help, maybe you can provide some further insight into how you're creating/sending the outbound IDocs. This could help us in trying to get some answer, but for a starter the COMMIT WORK mentioned by The specified item was not found. is in my opinion the best candidate.
    Cheers, harald
    p.s.: Even if you're using ALE, I don't think it could be due to anything in your distribution model as mentioned by The specified item was not found.. If you wouldn't have setup the distribution model, the SAP API's should create a master IDoc in memory and then no communication IDocs (since there's no recipients or due to filtering) and thus there should be no outbound IDocs on the database.

  • I can send in hotmail, but not recieve, how do I fix this

    # Question
    I can send in hotmail, but not recieve, how do I fix this
    I send a test to myself, and it doesn't go through,
    also links from searches don't arrive

    Hi there, thanks for your reply, I cannot give you the URL as this is Cloud Based Farming Software which requires a Login and Password. All I can tell you is that it is written in PHP. There are many graphs, all of them print from IE but no not print from Firefox.
    Cheers
    James

  • My BB Z10 is not recieving txt msgs

    Hello,
    Cam u support me regarding my bb z10, It is not recieving txt msgs however the msgs are being sent by my cell phone.
    Solved!
    Go to Solution.

    Hello Usamansc
    Welcome to http://supportforums.blackberry.com
    Make restarted the z10?
    If your problem evidences the persistence
    Apply a hard reset keep the power button for 30 seconds.
    Regards. 
    Response you like me? Want THANK? Click 
    If it was the SOLUTION click "Accept as Solution"!
    #4LL   #ichooseBlackBerry10 @Gutijose14
    BBM Channels  PIN: C0007093A
    Do not forget to give LIKE    Those people who help you and advise you about your doubts.  if the review has been SOLVED** # 4LL  #ÉliteRoad  Make a backup of your BlackBerry
    BlackBerry Protect and  BlackBerry Link constantly.  #ichooseBlackBerry10 Gutijose14 Forums Veteran I

  • Seeburger AS2 - DECRYPTION_ERROR - Could not retrieve certificate

    Hi
    Can anyone suggest a reason why I am getting this error regarding failed Decryption:
    Error while parsing AS2 message: DECRYPTION_ERROR # Error while loading decryption certificate: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: java.security.PrivilegedActionException: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: Could not retrieve certificate TRUSTED\STEVEB\XX.com.seeburger.ediint.edi.EDIMessageException: cannot decrypt message (certificate or private key missing)
    I am pretty sure that the configuration is correct...
    Configuration:
    [View Creator Role|http://i1111.photobucket.com/albums/h469/SBentley2011/ViewCreatorRole.png]
    [JCA Connection Factory |http://i1111.photobucket.com/albums/h469/SBentley2011/connectionFactory.png]
    [Keystore View|http://i1111.photobucket.com/albums/h469/SBentley2011/keystore.png]
    [PI7.1 Config|http://i1111.photobucket.com/albums/h469/SBentley2011/config.png]
    BTW I am using PI7.1 ENH 1 and Seeburger 2.5.1
    Thanks for looking.
    Edited by: Andy Cliff on May 25, 2011 12:40 AM

    Hi
    Really strange, but no joy at all. Even going for the alternative 'Code Based Access' option described below, I continually get  Error:
    java.security.PrivilegedActionException: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: Could not retrieve certificate
    _Code Based Access to the SAP Keystore_
    Creating/Inserting a New Certificate
    1. Create a personalized key store view. Certificates and private key entries should be stored in this
    view.
    2. Using the Security tab of the key storage service web interface, assign the following list of
    permissions to the codebase of the adapter in use:
    4. Note that permissions that are view based only need to be set once per view and
    codebase/domain combination, but entry based permissions need to be set for each entry in the
    view to the codebase/domain!
    5. Open the NetWeaver Administrator - Application Resources and select the JCA Connection
    Factory for the respective adapter. In the lower pane, select the Configuration Properties and
    adjust the adapterUser to an empty String (delete the previously entered name). This disables the
    user based access and enables code based access. Do not forget to Save your changes.
    The following table lists the adapters and the corresponding codebases/domains:
    SEEBURGER Adapter Configuration for SAP NW Process Integration 19
    In case you experience errors which read as "Reauthentication failed" or "Error
    construction implementation" you might need to restart the J2EE server
    u2022 VIEW_ALIASES
    u2022 GET_VIEW
    u2022 LIST_VIEW
    u2022 IS_VIEW_EXISTS
    u2022 FIND_ALIAS
    u2022 LIST_ENTRY
    u2022 READ_ENTRY
    u2022 IS_ENTRY_A_KEY
    u2022 IS_ENTRY_EXISTS
    u2022 CREATE_ENTRY_AT_VIEW (for pending keystores)
    4. Note that permissions that are view based only need to be set once per view and
    codebase/domain combination, but entry based permissions need to be set for each entry in the
    view to the codebase/domain!
    5. Open the NetWeaver Administrator - Application Resources and select the JCA Connection
    Factory for the respective adapter. In the lower pane, select the Configuration Properties and
    adjust the adapterUser to an empty String (delete the previously entered name). This disables the
    user based access and enables code based access. Do not forget to Save your changes.

  • Still have not recieved my

    I sent my 5 gig zen micro in over 3 weeks ago, and I still have not recieved my replacement. I know it was recieved, and it was found defecti've, so when can I expect a replacement? The lack of tunes is killing me.
    BTW my RMA# is 6MAR58905Message Edited by UMNbandgeek on 04-05-2006 03:00 PM

    Well it depends what country your in. If your in U.S heres the number for customer service:
    For english: 405-742-6622
    For French: 405-742-2385
    For Spanish: 405-742-2380
    Im not sure if you their the ones your going to get help from, because they might not have the information. Usually if they dont have the information they connect you to the department responsible for RMA'S. But it takes FOREVER! To get connected.

  • Could not create certificate request

    jdev version: 10.1.2.3.0
    Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Prod
    PL/SQL Release 10.2.0.4.0 - Production
    TNS for Linux: Version 10.2.0.4.0 - Production
    How can i create a certificate signing request like that:
    CN=EURTRANSBEL
    OU=ICT 4.2 ORACLE
    O=SPF AFFAIRES ETRANGERES
    L=BRUXELLES
    ST=BRABANT FLAMAND
    C=BE
    SN=020100303
    E=[email protected]
    In oracle wallet manager(new signing request, advance and there i put the DN),
    when i create a certificate signing request like that it's said "could not create certificate request...."
    When i try to put a Dn like that:
    CN=EURTRANSBEL, OU=ICT 4.2 ORACLE, O=SPF AFFAIRES ETRANGERES, L=BRUXELLES, ST=BRABANT FLAMAND, C=BE
    it work fine, but when i only add the SN like that:
    CN=EURTRANSBEL, OU=ICT 4.2 ORACLE, O=SPF AFFAIRES ETRANGERES, L=BRUXELLES, ST=BRABANT FLAMAND, C=BE, SN=020100303
    it crash.
    How can i do.
    Thanks in advance
    Edited by: Malebodja on Mar 3, 2010 6:28 AM

    You are making the dn manual? Or you are filling the form?
    Why dont you try to run it in a windows Machine, install the Database client and it includes a Wallet Manager. I never seen a problem like you mentioned I've done this in Linux, Unix and Windows and haven't had any problem unless there is a missconfiguration or bad installation.
    Greetings

  • Bestbuy says shipped/ ups says label created but not recieved.

    Ordered Samsung TV bestbuy says it shipped 3/4 and was post be here 3/9, but ups says they have not recieved it?

    Hello Troych888, 
    I hope you are doing well. I see that during my research of this issue you contacted our phone support who were able to offer you a resolution. Sadly, it seems the TV arrived with a damaged screen but we've set you up with UPS to have the TV picked up and returned to us.
    I am truly sorry that this has been your experience, as it is certainly not indicative of the usual experience or the experience we strive to provide our customers. I hope that this doesn't influence your future shopping destination. If you should need further assistance, please let me know. 
    Sincerely,
    Tasha|Social Media Specialist | Best Buy® Corporate
     Private Message

  • Delivery block if Advance payment 30 % not recieved

    Hello
    I have scenario
    Create sales order
    Recieve 30 % advance
    Create delivery
    Now If I recieved 30 % then system can allow me to create delivery,if Not it should block
    Kapil

    Hey I feel you can achieve this by Billing Plan with downpayment Line items
    In the sales order billing plan line item create the down paymnets as % basis of the total amount (=30%) and bill it FAZ
    down paymnet request with SPL GL as F
    So in the setting of the OVA8 you can set dynamic credit check with max open items.
    Now if the amount is not recieved then the order will get blocked.
    Once the down payment is recieved post the same in FI with SPL GL as A downpaymnets to be cleared and knock off the same in FI.
    Now the order has no open items and so the can be billed.
    Thanks!
    A S

  • Not recieved my software

    hi have bought adobe lightroom from you 0n the 7th of april but have not recieved it yet its now the 1st of may plese try and track my parcell
    my order number is   AD004188274EDUK   and my united parcel service number is   1Z 4V4 A49 04 5534 0775

    According to the tracking number provided, UPS has had your Lightroom since the 4th, delivery was attempted on the 19th, then twice on the 22nd.
    I've never had any delivery service try to contact me that an attempt was made beside a sticker on my door. Usually you can contact after the first attempt and have them return on a specific day whey you will be around. Also, if you use the tracking number ahead of time, you can find out the estimated time of delivery and reschedule. I had to due just that when I was at my brother's wedding.
    It looks like you've already contacted us about this and that a second delivery will be tried, but yes, there will be a time delay due to some strange delivery policy on the part of UPS. I can't believe that two tries on the same day count as two different delivery attempts.

  • Not Recieved MC ID yet

    Hi team,
    I have passed my Certification Exam on 27/12/2013,but not recieved MCID yet.
    My details are mentioned Below:
    Sunny Singh
    thanks

    Hi, Sunny.
    Congratulations on passing the exam!
    You should have received an email from the Microsoft Learning Certification team congratulating you on passing your exam. It sounds like you didn't get one.
    I think you need to contact Microsoft Learning Support to get this fixed. Keep your printed exam results handy when you contact them. It has important information that might be needed to fix this.
    You will need to contact your Microsoft Regional Service Center. Their email address ([email protected]) has been flaky lately (not working) so you may need to call them on the phone if your email bounces back to you. Please use the following web
    page to find the contact information for help.
    http://www.microsoft.com/learning/en-us/help.aspx.
    This web page includes email and phone contact information for your geographic location so you can email or call them directly. They will help you get this figured out.
    NOTE: This public forum is usually monitored by fellow IT professionals like you and me but not by Microsoft employees.
    NOTE: For security purposes, if I were you, I'd edit your message above and change your candidate ID to: SRnnnnnnn. I don't want anyone to see or steal your candidate ID.
    Good luck!
    Best wishes, Davin Mickelson

  • I am not able to text one specific person.. seems i can sporadically recieve their text but they are not recieving mine.  I have looked at several forms and tried several things.. some forms suggesting a problem with the carrier.  Has anyone on Koodoo ?

    I am not able to text one specific person on my iphone 4.  They an sporadically send but she is not recieving my message.  I have read several forums and tried several things.. resetting etc... to no avail.. someone mentioned this may be the network.  can anyone help? the phone also say it is ready to install update to ios 7.0.6 which provides a fix for ssl connection verification.  then it indicates cannot be installd bcause it requires at least 3.7 GB of storage.  So i have deleted some things and pretty sure I have enough GB  but still reading the same message.  OMGosh .. so frustrated.. especially wtih the texting.

        jsavage9621,
    It pains me to hear about your experience with the Home Phone Connect.  This device usually works seamlessly and is a great alternative to a landline phone.  It sounds like we've done our fair share of work on your account here.  I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you.  I look forward to speaking with you.
    TrevorC_VZW
    Follow us on Twitter @VZWSupport

Maybe you are looking for