Not recognizing my 640x480 device.
Flash Media Live Encoder sees my 640x480 device as 720x480 or some other wide screen device. I'm coming in through firewire from our Sony Anycast. FMLE sees it at 640x480 on my Mac but not on my pc.
Thanks
You may want to check with Sony regarding the drivers. I had the same issue with a Roland MV50 last week, and I had to go into a setting on the Roland to change it. Rather simple...so would assume you can do the same with the Sony AWS750.
Similar Messages
-
My ipad is not being seen by itunes in Windows 7. I uninstalled then reinstalled itunes it started working for a while then it stopped. I get a message stating that the device is not recognized or the device is defective replace device. Anyone have a fix.
At present I have no power to the Gen 7, so need to get some power to it I think. I pressed the buttons as you suggested, but nothing is showing up at this point. Thank you for your response as the more I can rule out before I take it back the better I think.
-
Canvio 3TB HDD not recognized by other Devices
I am trying to connect this Canvio 3TB HDD to my Samsung TV and its not recognized. Tried connecting to the Samsung BRDVD player, not recognized. These devices recognize other HDD's but not this one. Any suggestions?
Yes, that should be fine. It would just operate slower usually. Do your devices recognize other drives that have that large of a capacity? Perhaps they can't see it because 3 TB is more than they support. I don't know for sure though. You may always want to contact Samsung.
- Peter -
ITUNES NOT RECOGNIZING IPHONE 4S DEVICE, NOT ABLE TO SYNC
Hi Everyone, just noticed an anomaly with my devices
ITUNES NOT RECOGNIZING IPHONE 4S DEVICE, AND NOT ABLE TO SYNC. ANY IDEAS WOULD BE HELPFUL, THANKSOpen Device Manager and Right click Apple Mobile Device and choose Update Driver
Select BROWSE My Computer For Driver Software
Select Let me pick from a list of Device Drivers on my Computer
Click Have Disk button---NOTE if the have disk option is not available. Choose a device category
such as mobile phone or storage device if listed then Click Next the have disk button should appear.
Click the Browse button and navigate to C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
Double click the "usbaapl" file or "usbaapl64" or if there is no driver folder look in
C:\program Files (X86)\ Common Files\Apple\Mobile Device Support\Drivers. instead
Click open in Have Disk Window Then Click NEXT and then FINISH Windows will install the Drivers
GOT THIS FIX FROM AN EARLIER POST BY J F FOURIE and it worked for me
Hope this helps -
Usb drive not recognized due to device malfunction? What does this mean.
Office 2004 does not and will not run in Lion. Upgrade to Office2011.
There are more apps that will not run or have "issues". you will find a list here:
www.roaringapps.com -
I Just had my Ipod touch replaced and wantedto sync my content onto my new one but itunes isnt recognizing my new device. What do i do for it to be recognized so I can get my things back on it?
Try here:
iOS: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
Make sure yo have iTunes version 10.7 -
IPod not recognized. says"USB device not recognized and has malfunctioned
I just bought an iPod nano from one of my friends and i got the usb cord off of ebay. when i connect my ipod to my computer. it says usb device not recognized. i've installed software and everything. i've downloaded iTunes and all the ipod software i can find including the updater and other downloads from apple. PLEASE HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
After switching to a Nano, my Dell pocket DJ is having the same problem you are describing. I can't tell what the fix is but I plan on purchasing a new USB as I suspect that may be the problem.
-
Frozen appple on LCD and not recognized by windows (Device Malfunction)
All songs totally erased from my Ipod a few weeks back. When I tried to syncronize my computer now says that the device is malfunctioned and windows does not recognize it. Now the Ipod has a frozen apple on the LCD that I cannot turn off or anything.
The usual things to try here would be to reset the iPod and restore the iPod.
There are troubleshooting steps listed here.
iPod not recognized by Windows. -
ITunes 12 not recognizing any attached devices
I have installed uninstalled and reinstalled iTunes 12 about 3 times. It will not recognize any of my devices, iphone, ipod, ipad, etc. My PC is running Windows 8 and it is seeing the usb connections each time I attach a device. iTunes does not see them. I ran the diagnostic and it stated that no devices are connected. I tried reverting to a previous version, but the update changed my library which the older version will not recognize. Has anyone found a solution?
HI RAM0402,
I see that you are having some issues with iTunes identifying your iOS devices. Here is an article that will outline some further troubleshooting steps that you can take to address this issue:
iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
http://support.apple.com/en-is/TS1538
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
MY DVD Drive is not recognized by the Device Manager
Hi,
I own a Presario 6608AU version notebook.
The prob is since i removed Windows Vista from my notebook and install WIN XP my DVD drive is not working. Neither is it recognized by the Device manager too.
I have tried for all solutions available on net.
Should i install any drivers for the same. please help meI am also having problems I have a brand new HP G71-34OUS Notebook with Windows 7 I can't use CD's or DVD's the computer is not reading them. I need to know where to find the drivers to download please help me with this
-
Why is my phone not recognized as my device?
When I plug in my phone in the computer to charge or update apps, my phone is being recognized as another phone name or device in our household. In ITunes under devices is shows my name to my phone. Just not sure why the computer is not recognizing my name with my phone in devices. Does it matter or should I be concerned?
Try resetting the the iPod Nano. For how to reset see the appropriate section of:
http://www.apple.com/support/ipod/.
BTW, you posted in the iPod touch fourm. They are very different that the Nano. -
I am using an IPod Touch 3. I get the error message USB Not Recognized. Now I have tried three different USB Cables and three different computers...... Same error message. My daughters IPod Touch 4 works perfectly with all of those USB Cables and computers, so this is not a USB problem or a computer problem. It must be something with my IPod Touch 3. Every article I go to wants me to look at stuff on the computer but how could that make sense if other IPod Devices work fine? Please. Any information would be greatly appreciated.
You need to provide more information about your network. What frequency does it use (2.4ghz or 5.0ghz), which wireless protocol (a, b, g, b/g compatibility, n), and what security are you using (WEP, WPA2, etc.)?
Please also provide more information about your iPod Touch. Which model is it, and which version of the iOS are you running on it? -
My iPad requires an IOs update, but I am not able to sync my iPad with my Itunes on my computer. Don't know what to do, tried everything, its not working. Please advise me.
Choose your OS
iOS: Device not recognized in iTunes for Windows
iOS: Device not recognized in iTunes for Mac OS X -
Please advise why my Nano 5th g is suddenly not recognized in Itunes as a Device as was previously. I cannot sync Nano with ITunes. What do I need to do?
iPod appears in Windows but not in iTunes
-
IPod touch g4 iOS 6.1.3 not recognizing external gps devices.
Having intermittent luck in getting my iTouch g4 with iOS 6.1.3 to acknowledge my external GPS devices. I have tried the TomTom, Dual cradle and Dual Bluetooth devices and each has the same issue. It works great some times and other times will not recognize that the device is connected, but other aspects of the device (charging, speakers, etc) work fine so physical connection is there. In some cases, @ 50%, resetting the iPod will work, other times I can reset 5x and still not work. Tried disabling wifi , going into airplane mode etc.... No real pattern as to what gets it going. Seems to be a memory issue in OS. My brother in law has experienced the same kind of issues.
Any idea what is going on or how to report a bug to apple?
Thanks, lost / going nowhere (as far as my iPod is considered)TS1702 magellan External gps not...: Apple Support Communities
after updating to iOS 6 gps signals are...: Apple Support Communities
Maybe you are looking for
-
To Simon Lessard - Usecase required for ER request
Simon, I received a notification for ER 7355435 I filed on your behalf posted long time ago in [ER] Add a way to decorate the current PageFlow For some reason I didn't receive the follow up notification from the bug database and eventually today it g
-
Coding "Add to favorites" links for Macs
We recentely got our iMac and I noticed that the "Add to Favorites" link on my web site doesn't work when I'm using Safari. The link worked, and still works, when I use IE. Is there a different Java code that I need to use for bookmarking links on a
-
Everytime I open a window in Firefox 4 beta 2 I get a messeage that says TypeError: Components.classes(cid) is undefined, when I click OK it opens up the new window.
-
do i have to select what i back up onto my external hard drive, or does it back up everything automatically?
-
CUP 5.3. Password Self Service description+sequence
Hi together, where is it possible to chance the password self service description? The description appears on the "request access"-screen. Every requesttype can be changed in the configuration but not the password self service. Also it isn't possible