Not recognizing my CD. HELP ME I AM EMO IF THIS IS NOT SOLVED

I try to import songs off of my CD's but iTunes isn't recognizing my CD. It doesn't bring up a CD list with an import button. I am mad and emo if this is not solved. As aforementioned above. Fu computer.....

Try uninstalling and reinstalling BOTH iTunes and Quicktime first. Make sure all of your antivirus/security programs are off or disabled when reinstalling

Similar Messages

I just bought a mac mini over the weekend. I saved items from my old G4 to an external hard drive. I go to plug in the external hard drive and the new computer is not recognizing it. Help.

I just bought a mac mini over the weekend. I saved items from my old G4 to an external hard drive. I go to plug in the external hard drive and the new computer is not recognizing it. Help.
Here is the information I have. The external hard drive is a 120GB Acomdata. It has both USB and Firewire. When I go to plug in to the mac mini through USB, it is not being recognized. When I switch to Firewire on the old computer I can see it, however when I go to USB it is not being recognized (even on the old computer).
I'm at a loss as to what to do. Any advice would be helpful.

Shalese wrote:
Have you ever tried the FW 400 to 800 adapter?
I have used them on multiple occasions and they work just fine.
Try this (maybe you already have):
-Boot Mini with drive disconnected.
-Do not connect drive but turn it on
-wait a few seconds for drive to spin up
-plug cable into the Mini then into drive.
This is an old drive and may have some timing
issues.
I had an Acomdata drive a long time ago. It
worked fine with FW but USB was flakey.

I got an itunes giftcard for my birthday and when i tried to add it on my balance on my ipod touch it says the code you entered is not recognized as a valid code. but i just got this card brand new for my birthday.

i got an itunes giftcard for my birthday and when i tried to add it on my balance on my ipod touch it says the code you entered is not recognized as a valid code. but i just got this card brand new for my birthday.

Make sure you're using the correct code. For most iTunes cards, the code is under the scratchoff area on the back of the card. For more information, see this support article:
http://support.apple.com/kb/TS1292
If you can't get to work after perusing that page, contact the iTunes Store Support; instructions are at the bottom of that article.
Regards.

My IPad screen is frozen with a message stating that the IPad has not been backed up to the ICloud for 7 weeks, this is not correct.I cannot get the messageto clear and cannot access any of the other icons; is there an emergency reboot process?

My IPad screen is frozen with a message stating that the IPad has not been backed up to the ICloud for 7 weeks, this is not correct. I cannot get the messageto clear and cannot access any of the other icons; is there an emergency reboot process?

Have you tried resetting your iPad?
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
No data will be lost.

TS1292 itunes says my itunes card "has not been properly activated" when i enter the code. this is not the "invalid" message related to entering the code improperly.

itunes says my itunes card "has not been properly activated" when i enter the code. this is not the "invalid" message related to entering the code improperly.

Are you able to go back to the store that you bought it from and ask them to activate it properly ? If not then you will need to try contacting iTunes Support (you will probably need to give them images of the front and back of the card, and possibly its receipt) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

Nano not recognized by Windows, help!

I just got a second generation Nano, but whenever I plug it into my USB port it will say the following message:
USB Device Not Recognized
One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it.
I had a first generation Nano that had no problems syncing with iTunes, but that one got corrupted, so I resorted to getting a new one.
I have tried the Five Rs, erased iTunes entirely and redownloaded Version 7.3 by way of the Apple website, and I have gone to the Genius Bar at my local Apple store only to have them give me another Nano with the same results. I don't know what else to do! Please help!
Dell Windows XP

http://docs.info.apple.com/article.html?artnum=305136
Even if no new drivers are available for your computer, read the last section and update your USB driver.
Also: http://docs.info.apple.com/article.html?artnum=93499
Try a drive letter Z and do this with all other USB devices other than your keyboard and mouse disconnected (this includes disconnecting your printer).

USB device not recognized - ipod video-help!!

when I connect my ipod video, I get a message "USB device not recognized", when I click, I get: "no drivers installed for this device". I have re-installed the ipod software, reset the ipod and re-installed itunes, just in case. I have been on this problem since Christmas. Any ideas at all, anybody?
dell Windows XP

I have this EXACT same problem. And my ports are definitely 2.0 USB. I've uninstalled and installed all the iPod, iTunes and Quicktime components at least 4 times. I've reset the iPod. I've read everything I can get my hands on... nuthin'... nada...
Can anyone help?

HT1339 ipod not recognized by my computer, it says "Windows has stopped this device because it has reported problems. (Code 43)" please help

please help...
my computer is not recognizing my ipod classic gen 5. it shows the sad face then i did the basic troubleshooting until logo comes out...
still my computer is not recognizing my ipod.. it still says "Windows has stopped this device because it has reported problems. (Code 43)"

See here: iPod displays a sad iPod icon
Note that it's often a good sign of a hardware issue with the iPod's hard drive meaning the iPod will need to be serviced or replaced.
B-rock

External hard drive not recognized... help please.

okay, well here is the story:
my iBook G4 had its stock 30gb hard drive in it and it was running extremely low on space. so i figured i didn't want to carry around an external hard drive, therefore i would buy an internal hard drive an install it. so i purchased a new 2.5" 80gb hard drive and called up the local apple store. they told me that although it was under warranty, that it did not cover hard drive installation. so i looked it up online and found step by step instructions to install the hard drive. so after lots of hard work and many screws, i installed the new hard drive successfully... but i still had this perfect 30gb hard drive. i thought maybe to save a few bucks i could turn it into a usb external hard drive. i found an enclosure for the hard drive and a usb 2.0 cable and plugged it into my ibook. it was recognized and everything. i put some files on the external hard drive and transferred it to another mac. this is where the trouble started. i plugged the hard drive into a PowerMac G4, and it was not recognized... so i tried it on a different mac. this time on a PowerBook G4, but no luck. this issue has been troubling me for a few weeks. but then i tried it on a similar iBook G4... and it was recognized. but i don't know why it was only recognized only on the iBook G4 (not the same iBook G4 it was pulled out of) and no other macs.
does anybody have any ideas what we can do to get this hard drive to be recognized by other macs?
any of even the smallest ideas would be greatly appreciated.
thanks,
tyler
iBook G4 Mac OS X (10.4.3)

I can walk you through formatting the hard drive:
1. Hook it up to an iBook that recognizes it.
2. Go into your Applications folder, then scroll down to Utilities. Open Utilities and scroll down a bit and you should see Disk Utility. Double-click.
3. On the left side you should see your internal hard drive and your external one. Each hard drive will have a sub-catagory with the partition indented.
4. Your external hard drive will probably be the second catagory. Click it.
5. In the center-top you should see the tabs First Aid, Erase, Partition, RAID, and Restore. Click the Erase tab.
6. You should see Volume Format: and then a drop down menu, and Name: and a text box. Type in the name you want the external hard drive to be named.
7. In the drop down menu, select Mac OS Extended (Journaled).
8. Then, simply click Erase, watch the progress and it should be good to go!!
Hope I helped you out. Oh, and it might be the enclosure...and also what OS's? Since it's USB it is probably using a USB Mass Storage driver. Mac-wise, if formatting doesn't help, I would get a FireWire enclosure because FireWire is much faster than just USB 2.0. Oh, thats nother thing...Is the enclosure Hi-Speed USB? If it isn't, I would definitely get a FireWire one...If it is, the PowerMac G4 doesn't have Hi-Speed so you're not taking full advantage..Just some insight
iBook G4 Mac OS X (10.4.3) 512 MB Ram, CD-RW Combo Drive, 40 Gig HD, bought in October of 2005...
Message was edited by: Hilary_Rose

Charging icon appears but not recognized by computer help!!!

Charging icon appears but not recognized by computer and yes i have waited 30 minutes. That what the manuals said.
Then after a while the icon dissapers and the apple loggo thing appears and i have tried to turn it on but it won't just do!!!!.And i have like a month letting my ipod connect to the computer via USB but it wont charge =S...
What's going on???
HELP!!!!

Have you tried a different cable?
This is the iTunes Mac Discussions area - you can also post in the iPod Discussions as this is an iPod question more than an iTunes question.
Go here http://discussions.apple.com/category.jspa?categoryID=146 for iPod discussions.
MJ

IPod not recognized by iTunes. Also iPod seems disabled/locked showing "do not disconnect". Not responding to anything. Any help please.

My iPod is not being recognized by iTunes. iPod seems disabled and not responding to anything. Permanently on "do not disconnect". Not sure what to do.

Hello,
My iPod is not being recognized by iTunes or internet
explorer. It used to, but not anymore. It just
dosent show up when I connect it to my computer.
Also, the "do no disconnect" sign does not appear on
my iPod when I connect it. It is still able to
recharge, though.
have u tried a different usb port?
I read that I have to restore it. I have tons of
songs in my iPod that I do NOT want erased! How can
I back these songs up? I have some songs on my iPod
that are from another person's computer, so if they
get erased, the songs are gone forever.
try this http://www.copypod.net/
Nano 4GB black|Moto RAZR V3 black| PSP| all kinds of cases for nano|radio/remote Windows XP <img src="http://i36.photobucket.com/albums/e13/superman5656/c.jpg" ="right"

2 problems, iPod nano battery depleted and not recognized by Windows, help!

Earlier this morning. At first when I connected the usb to the computer I got the screen in the nano that said "apple.com/ipod/support" or something like that, with the folder/exclamation mark icon. It was charging but I disconnected it cause I had to go. I tried to do the same at night but this time is when it's totally dead, and not recognized at all. What can I do now?
I havent used the nano in a while and the battery is depleted, so I tried to charge it but neither windows or itunes or the updater/restore recognize it.
I'm on a laptop, I already tried most of the stuff in the faqs but it wont work.

i kind of have the same porblem, my klaptop does regcognize the ipod on "my computer" but the iPod dosen't shows up in iTunes, and i have tried almost everything in the faq that show how to fix the problem, but it still dosen't work....

My 1st gen iPad is not recognized in iTunes, help! I have uninstalled, reinstalled, stoped and started the mobile....nothing is working.

I have done everything I can find online to solve my problem, but I still have the same problem. My 1st gen iPad is not recognized in iTunes! Cannot sync! Please, any suggestions from anyone? Anyone else having the same problem?

Hello casinojen,
I would be concerned as well if my iPad was not recognized by iTunes. Thank you for providing all the information with the steps you took in regards to this issue. I found an article with a few more steps you can take (you can skip the steps you have already taken):
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thank you for using Apple Support Communities.
Best,
Sheila M.

Hi I wonder if anyone can help? iTunes is not recognizing my iPhone. It is showing on my computer but not in iTunes?

My iPhone is not showing in iTunes. I can see it on my computer but not iTunes. Is anybody able to assist me please? Thanks

iOS: Device not recognized in iTunes for Mac OS X
iOS: Device not recognized in iTunes for Windows

"USB device not recognized." "The connection between your device and the desktop could not be established. Please check your setup and try again." Tungsten E2, Outlook 2007

Hi,
I am running XP SP 2, on a Dell Vostro 1000, Palm OS Garnet v5.4.7 on a Tungsten E2. I have worked though issues relating to synchronization, Outlook 2007, Docs to Go, etc., in the past. Thank you board members!
Once I worked thru all the initial problems, my Tungsten E2 was sync' ing beautifully to my laptop until a few days ago. There have been no changes (I know of) to the configuration, but now I receive "The connection between your device and the desktop could not be established. Please check your setup and try again." On the laptop I sometimes get "USB device not recognized." I am unclear why I get the PC message sometimes and not others.
I have tried the following: (not necc exactly in this order)
Double checked Hot Sync Mgr settings: Local USB (ver. 6.0.1)
Reset the Palm (multiple times)
Rebooted the laptop (multiple times before and after the Palm resets)
Went to Support Libraries including http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=57,E=0000000001060189973,K=9550,Sxi=3,Case=Obj(3695...)
and http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE?New,Kb=PalmSupportKB,ts=Palm_External2001,Case=obj(1409)
Followed the steps in "Start Here" found at http://forums.palm.com/palm/board/message?board.id=windows_hotsync&thread.id=26057
Moved Backup directory as per a post on this forum
Looked for a deleted a file called "Graffiti_ShortCuts_____________" per a post on this forum
Followed the steps in HotSync troubleshooter guide you can run through located on
http://kb.palm.com
Went into Device Manager - found it shows no yellow ! 's
Followed Device Mgr Troubleshooter - went all the way thru with no solution
Tried all four USB ports - the PC's bell-like tone does not sound when I disconnect or reconnect the Plam's cradle like it does when I conn/disconnect other USB devices -I think that is a clue. ...?
Cleaned the Palm's contacts (and cradle's contacts with a old, dry toothbrush)
Read all the posts under "USB device not recognized."
OK, I'm at a loss, can anyone help me? Many thanks in advance!
~Bob
Post relates to: Tungsten E2

Hello!
Using a cradle with the Tungsten E2? Tried bypassing the cradle and just use the hotsync cable? Tried a different computer yet? Somehow, the PC is having problems getting a signal from the device. I assume you have the laptop charger plugged into the laptop during this? Not going through a docking station or port-replicator.
One crazy thing you can try is unplug the charger from your laptop, remove the battery from the laptop and leave it out for like 10mins and put it back in and reboot the laptop. This should not cause side effects but still contact your OEM to make sure that nothing else is needed after leaving the battery out for extended period of time. Keep me posted.
Post relates to: Treo 650 (Unlocked GSM)

Not recognizing my CD. HELP ME I AM EMO IF THIS IS NOT SOLVED

Similar Messages

Maybe you are looking for