Not regognising iPod for more that 2 seconds

I need some help. When I plug my iPod into my computer, and I click on My Computer, the iPod shows up there for about 2 or 3 seconds, and then goes away, and the iPod goes to the main menu. What I want to do is open the iPod in My Computer but when it doesn't show up, I can't do this. Any suggestions?

I had a problem similar to this. When I open iPod updater it tells me it could not mount my iPod. I replaced the hard drive with that of my iPod U2 and now it works fine.

Similar Messages

Not Recognising iPod for more than 2 seconds

I need some help. When I plug my iPod into my computer, and I click on My Computer, the iPod shows up there for about 2 or 3 seconds, and then goes away, and the iPod goes to the main menu. What I want to do is open the iPod in My Computer but when it doesn't show up, I can't do this. Any suggestions?

I had a problem similar to this. When I open iPod updater it tells me it could not mount my iPod. I replaced the hard drive with that of my iPod U2 and now it works fine.

Ipod will not stay connected for more then a few seconds

I was going to update my nano this morning after downloading the newest version of software, and first off it said the firmware was corrupt. so then I restored it, and it would not restore to the new version so i used the older version. the ipod seems to work in my hand but when i connect it to my computer it will not stay connected for more then a few seconds, then it ejects its self, but itunes still shows it as being there even though the rest of the computer does not
I have not had any issues with it since i bought it which was last june.
any ideas?
John

Hi John,
I would suggest, with your iPod disconnected, that you force your iPod into disk mode (following the instructions in this article)
Connect your iPod to your computer.
Then, try restoring it in iTunes while it is connected in disk mode.
Can you successfully restore your iPod?
If so, when the restoring and resyncing process is all complete, now update your iPod to the latest firmware.
Any success with trying that?
-Kylene

My iPad does not restart, I have kept the button for more than 10 seconds and will not turn off. Please if anyone has any idea that I do, let me know. thanks

My iPad does not restart, I have kept the button for more than 10 seconds and will not turn off.
Please if anyone has any idea that I do, let me know.
thanks

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: You have to hold 2 buttons down together.

Why will my Mac 8,1 intel desktop not stay in sleep mode for more than 5 seconds?

Why will my Mac 8,1 intel desktop not stay in sleep mode for more than 5 seconds?
Have tried repeatedly and end up shutting down instead of "sleeping:.

Hello, most usually it's some USB device causing that, but...
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed. Or an errant process eating up RAM.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

In the evaluation mode im nt able to view my ocr result for more than 2 seconds

im doing my final year project on image processing using labview 2010(evaluation). im using a microsoft webcam(VX-700). my objective is character recognition using vision. im able to capture an image and store the same. the software also recognizes the characters after training the characters in vision assistance. but im not able to view the result string for more than 5 seconds. i really want to have some support regarding this issue. i've attached the program what i've used with this message. plz do help me with this issue asap.
Attachments:
OCR First Example with integrated2.vi ‏120 KB

Rudegar,
Our network is very stable and we aren't seeing any problems with anything else and besides, these worked fine until we did the update.
The wifi access point is in the same room about 6-8 ft. away and it's kind of hard to connect an appletv by ethernet to an iPad.
The appletv runs fine using it's built in applications, like Netflix, Disney, Radio, etc.
All of this makes me think it's not a wireless problem, but it's something in the appletv software after doing the update that won't hold the iPad connection.
I appreciate your suggestions and will pass your information along to our network person.
Any other ideas?
Thanks

I accidentally changed a setting on my ipod touch and now it won't change back. I have had my ipod for more than two years and i dont know what to do. If i go to the apple store, would they fix it, or would i need to get a new one?

I accidentally changed a setting on my ipod touch and now it won't change back. I have had my ipod for more than two years and i dont know what to do. If i go to the apple store, would they fix it, or would i need to get a new one? If it could be fixed, how much would it cost?

If it is still under warranty you can call the 800 number to apple and enter the serial number and it will tell you if it is under warranty or not if not its like $30 basically for them to help or something like that it said today when i called...
Or take it to a genius bar if you have one near?
Or further explain what setting you are needing fixed back and im sure someone here can help you for free!

[SOLVED]"kernel: task blocked for more than 120 seconds"

Hello,
today I just found this weird message in journalctl after running "pacman -Syu". Everything (even the update) worked fine, nothing unexpected had happened. RPi works as expected. I just wan't to be sure that this problem is not signaling something bigger.
Jun 16 09:17:06 smecpi sudo[6228]: puser : TTY=pts/0 ; PWD=/home/puser ; USER=root ; COMMAND=/usr/bin/pacman -Syu
Jun 16 09:17:06 smecpi sudo[6228]: pam_unix(sudo:session): session opened for user root by puser(uid=0)
Jun 16 09:19:53 smecpi kernel: INFO: task kworker/u2:0:6233 blocked for more than 120 seconds.
Jun 16 09:19:53 smecpi kernel: Not tainted 3.12.21-1-ARCH #1
Jun 16 09:19:53 smecpi kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Jun 16 09:19:53 smecpi kernel: kworker/u2:0 D c05ce278 0 6233 2 0x00000000
Jun 16 09:19:53 smecpi kernel: Workqueue: kmmcd mmc_rescan
Jun 16 09:19:53 smecpi kernel: [<c05ce278>] (__schedule+0x290/0x5ec) from [<c04c43a0>] (__mmc_claim_host+0x90/0x1f0)
Jun 16 09:19:53 smecpi kernel: [<c04c43a0>] (__mmc_claim_host+0x90/0x1f0) from [<c04cab3c>] (mmc_sd_detect+0x1c/0x70)
Jun 16 09:19:53 smecpi kernel: [<c04cab3c>] (mmc_sd_detect+0x1c/0x70) from [<c04c6880>] (mmc_rescan+0x20c/0x3c8)
Jun 16 09:19:53 smecpi kernel: [<c04c6880>] (mmc_rescan+0x20c/0x3c8) from [<c003b9b8>] (process_one_work+0x130/0x43c)
Jun 16 09:19:53 smecpi kernel: [<c003b9b8>] (process_one_work+0x130/0x43c) from [<c003c908>] (worker_thread+0x134/0x3e4)
Jun 16 09:19:53 smecpi kernel: [<c003c908>] (worker_thread+0x134/0x3e4) from [<c0042544>] (kthread+0xa4/0xb0)
Jun 16 09:19:53 smecpi kernel: [<c0042544>] (kthread+0xa4/0xb0) from [<c000e178>] (ret_from_fork+0x14/0x3c)
Last edited by Kotrfa (2014-06-16 11:41:42)

Ir means just what it says. kworker (a kernel worker thread - https://raw.githubusercontent.com/torva … kqueue.txt) blocked for more than 120 seconds. This likely happened during one of pacman's big calculation jobs, and is also likely completely safe to ignore.
Last edited by samiam (2014-06-16 10:20:13)

Using i3 - keys start to lag (have to hold key for more than 1 second)

I'm using i3 and am having trouble with the keys suddenly and I have to restart the session to get it back to normal. No clue what it could be. I can use gnome, cinnamon, wmii, and awesome without issue, but i3 is what causes me problems.
When I type, I have to hold each key for more than 1 second before it registers. So in order to type "boat" I have to press and hold b for a second, then o for a second or so, same with a and t. Any idea what I should check first?
Thanks.
EDIT:
It just seems to happen randomly. When I'm typing, on the web, playing a game, etc. It's not like it's happening whenever I do a specific task or am running a specific application.
Last edited by sdouble (2013-04-07 19:30:25)

UnsolvedCypher wrote:What's your desktop environment?
Boots into GDM, select my session (i3), and log in that way. only WM I'm having trouble with this way is i3.
kaszak696 wrote:Can you see how xev (xorg-xev package) reacts to keypresses? Also, posting relevant configs and logs would be helpful.
I think i had a similar issue years ago, but i can't remember the details, sorry.
I haven't checked. I'll check next time it happens. It happens about once per day. I'll report back next time.
Here is my i3 config file. It's pretty raw, I've really only added a couple things to it (gimp & multimedia keys from keyboard, though I just noticed today that my vol up and down wheel isn't working anymore)
# This file has been auto-generated by i3-config-wizard(1).
# It will not be overwritten, so edit it as you like.
# Should you change your keyboard layout somewhen, delete
# this file and re-run i3-config-wizard(1).
# i3 config file (v4)
# Please see http://i3wm.org/docs/userguide.html for a complete reference!
set $mod Mod4
# Font for window titles. Will also be used by the bar unless a different font
# is used in the bar {} block below. ISO 10646 = Unicode
font -misc-fixed-medium-r-normal--13-120-75-75-C-70-iso10646-1
# The font above is very space-efficient, that is, it looks good, sharp and
# clear in small sizes. However, if you need a lot of unicode glyphs or
# right-to-left text rendering, you should instead use pango for rendering and
# chose a FreeType font, such as:
# font pango:DejaVu Sans Mono 10
# Use Mouse+$mod to drag floating windows to their wanted position
floating_modifier $mod
# start a terminal
bindsym $mod+Return exec i3-sensible-terminal
bindsym Control+$mod exec i3-sensible-termi
# kill focused window
bindsym $mod+Shift+c kill
# start dmenu (a program launcher)
bindsym $mod+p exec dmenu_run
# There also is the (new) i3-dmenu-desktop which only displays applications
# shipping a .desktop file. It is a wrapper around dmenu, so you need that
# installed.
# bindsym $mod+d exec --no-startup-id i3-dmenu-desktop
# app launcher
bindsym $mod+Control+g exec gimp
# multimedia keys
bindsym XF86AudioMute exec amixer set Master toggle
bindsym XF86AudioRaiseVolume exec amixer set Master 2%+
bindsym XF86AudioLowerVolume exec amixer set Master 2%-
# change focus
bindsym $mod+j focus left
bindsym $mod+k focus down
bindsym $mod+l focus up
bindsym $mod+semicolon focus right
# resizing alternative
bindsym $mod+Control+Left resize shrink width 5 px or 5 ppt
bindsym $mod+Control+Down resize grow height 5 px or 5 ppt
bindsym $mod+Control+Up resize shrink height 5 px or 5 ppt
bindsym $mod+Control+Right resize grow width 5 px or 5 ppt
# alternatively, you can use the cursor keys:
bindsym $mod+Left focus left
bindsym $mod+Down focus down
bindsym $mod+Up focus up
bindsym $mod+Right focus right
# move focused window
bindsym $mod+Shift+j move left
bindsym $mod+Shift+k move down
bindsym $mod+Shift+l move up
bindsym $mod+Shift+semicolon move right
# alternatively, you can use the cursor keys:
bindsym $mod+Shift+Left move left
bindsym $mod+Shift+Down move down
bindsym $mod+Shift+Up move up
bindsym $mod+Shift+Right move right
# split in horizontal orientation
bindsym $mod+h split h
# split in vertical orientation
bindsym $mod+v split v
# enter fullscreen mode for the focused container
bindsym $mod+f fullscreen
# change container layout (stacked, tabbed, toggle split)
bindsym $mod+s layout stacking
bindsym $mod+w layout tabbed
bindsym $mod+e layout toggle split
# toggle tiling / floating
bindsym $mod+Shift+space floating toggle
# change focus between tiling / floating windows
bindsym $mod+space focus mode_toggle
# focus the parent container
bindsym $mod+a focus parent
# focus the child container
#bindsym $mod+d focus child
# switch to workspace
bindsym $mod+1 workspace 1
bindsym $mod+2 workspace 2
bindsym $mod+3 workspace 3
bindsym $mod+4 workspace 4
bindsym $mod+5 workspace 5
bindsym $mod+6 workspace 6
bindsym $mod+7 workspace 7
bindsym $mod+8 workspace 8
bindsym $mod+9 workspace 9
bindsym $mod+0 workspace 10
# move focused container to workspace
bindsym $mod+Shift+1 move container to workspace 1
bindsym $mod+Shift+2 move container to workspace 2
bindsym $mod+Shift+3 move container to workspace 3
bindsym $mod+Shift+4 move container to workspace 4
bindsym $mod+Shift+5 move container to workspace 5
bindsym $mod+Shift+6 move container to workspace 6
bindsym $mod+Shift+7 move container to workspace 7
bindsym $mod+Shift+8 move container to workspace 8
bindsym $mod+Shift+9 move container to workspace 9
bindsym $mod+Shift+0 move container to workspace 10
# reload the configuration file
bindsym $mod+Shift+q reload
# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
bindsym $mod+Shift+r restart
# exit i3 (logs you out of your X session)
bindsym $mod+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -b 'Yes, exit i3' 'i3-msg exit'"
# resize window (you can also use the mouse for that)
mode "resize" {
# These bindings trigger as soon as you enter the resize mode
# Pressing left will shrink the window’s width.
# Pressing right will grow the window’s width.
# Pressing up will shrink the window’s height.
# Pressing down will grow the window’s height.
bindsym j resize shrink width 10 px or 10 ppt
bindsym k resize grow height 10 px or 10 ppt
bindsym l resize shrink height 10 px or 10 ppt
bindsym semicolon resize grow width 10 px or 10 ppt
# same bindings, but for the arrow keys
bindsym Left resize shrink width 5 px or 5 ppt
bindsym Down resize grow height 5 px or 5 ppt
bindsym Up resize shrink height 5 px or 5 ppt
bindsym Right resize grow width 5 px or 5 ppt
# back to normal: Enter or Escape
bindsym Return mode "default"
bindsym Escape mode "default"
bindsym $mod+r mode "resize"
# Start i3bar to display a workspace bar (plus the system information i3status
# finds out, if available)
bar {
status_command i3status

Premiere Pro and Soundbooth won't play video/audio for more than a second.

Ok, so my issue is that Soundbooth won't play audio for more than a second. It plays a quick bit then stops. Premiere Pro also does the same with video, it plays a quick bit then stops. I don't know if it is connected or not but when I try to change the audio output in Soundbooth to System Default I get this error:
I set the permissions to premiere and soundbooth to full but it didn't work. I've tried UnInstalling and ReInstalling but that didn't fix the issues either. All of the other programs seem to work. Any help would be much appreciated!!

Here is the fix.
1. Open Finder and navigate to /YOUR_HD/Library/Preferences
2. Rename or move to the Trash the file: com.apple.audio.AggregateDevices.plist
3. Relaunch The Program

[SOLVED] Cannot start X: Xorg.bin blocked for more than 120 seconds

I just rebooted my desktop after a couple of months and now I cannot run Xorg. When I run startx, I get a black screen for two minutes and then a backtrace pops up. At that point I can no longer interact with the console, but I can still ssh and run commands. I've tried setting Xwrapper.conf to needs_root_rights = yes and I have tried just running startx as root, with no help. I'm not sure how to isolate what would have broken this as I have updated so many packages in the last two months. Any ideas what I can try next?
If it helps, I am using the open source ati driver and my xorg.conf.d is empty.
Here is the dmesg showing the oops and the backtrace:
[ 72.778340] BUG: unable to handle kernel paging request at ffffec2003fffe00
[ 72.778368] IP: [<ffffffff811ac636>] kfree+0x56/0x1a0
[ 72.778389] PGD 0
[ 72.778397] Oops: 0000 [#1] PREEMPT SMP
[ 72.778413] Modules linked in: cfg80211 it87 hwmon_vid xpad ff_memless fuse mousedev joydev eeepc_wmi asus_wmi sparse_keymap led_class rfkill video evdev mxm_wmi mac_hid kvm_amd kvm crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd psmouse serio_raw radeon r8169 snd_hda_codec_realtek edac_core fam15h_power mii k10temp snd_hda_codec_generic edac_mce_amd sp5100_tco ttm snd_hda_codec_hdmi drm_kms_helper i2c_piix4 snd_hda_intel snd_hda_controller drm snd_hda_codec snd_hwdep snd_pcm hwmon i2c_algo_bit snd_timer i2c_core snd soundcore tpm_infineon tpm_tis tpm wmi shpchp button processor sch_fq_codel vboxnetflt(O) vboxnetadp(O) vboxdrv(O) ext4 crc16 mbcache jbd2 hid_generic usbhid hid sd_mod crc_t10dif crct10dif_common sr_mod
[ 72.778702] cdrom atkbd libps2 ohci_pci ohci_hcd ehci_pci ahci sata_sil libahci xhci_hcd ehci_hcd libata usbcore usb_common scsi_mod i8042 serio zfs(PO) zunicode(PO) zavl(PO) zcommon(PO) znvpair(PO) spl(O)
[ 72.779931] CPU: 7 PID: 1534 Comm: Xorg.bin Tainted: P O 3.17.4-1-ARCH #1
[ 72.781110] Hardware name: To be filled by O.E.M. To be filled by O.E.M./SABERTOOTH 990FX R2.0, BIOS 1503 01/11/2013
[ 72.782332] task: ffff880808b264a0 ti: ffff8807fcd30000 task.ti: ffff8807fcd30000
[ 72.783574] RIP: 0010:[<ffffffff811ac636>] [<ffffffff811ac636>] kfree+0x56/0x1a0
[ 72.784796] RSP: 0018:ffff8807fcd33a30 EFLAGS: 00010286
[ 72.786010] RAX: 0000022003fffe00 RBX: 00001000ffff8807 RCX: 0000000000010005
[ 72.787227] RDX: 000077ff80000000 RSI: 0000000000000007 RDI: 00001000ffff8807
[ 72.788446] RBP: ffff8807fcd33a48 R08: 0000000000000007 R09: ffffec2003fffe00
[ 72.789714] R10: 0000000000000017 R11: 0000000000000000 R12: ffff88080887a400
[ 72.790978] R13: ffffffffa0678f8c R14: 00000000000108f0 R15: 0000000000001800
[ 72.792211] FS: 00007f0dd095e8c0(0000) GS:ffff88083edc0000(0000) knlGS:0000000000000000
[ 72.793455] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 72.794680] CR2: ffffec2003fffe00 CR3: 00000000b7c0c000 CR4: 00000000000407e0
[ 72.795924] Stack:
[ 72.797140] ffff880811db0000 ffff88080887a400 ffff880811db0000 ffff8807fcd33b30
[ 72.798358] ffffffffa0678f8c 000000000000004c 000108480001092c ffff880700000008
[ 72.799584] 0000ffff00010844 000000000001092c 0000000000010848 0000000000010844
[ 72.800809] Call Trace:
[ 72.802053] [<ffffffffa0678f8c>] evergreen_hdmi_setmode+0xd8c/0x1970 [radeon]
[ 72.803320] [<ffffffffa052b8d4>] ? drm_detect_hdmi_monitor+0x74/0xc0 [drm]
[ 72.804555] [<ffffffffa0681488>] radeon_atom_encoder_mode_set+0x178/0x3c0 [radeon]
[ 72.805789] [<ffffffffa0563986>] drm_crtc_helper_set_mode+0x356/0x530 [drm_kms_helper]
[ 72.807017] [<ffffffffa061b97c>] radeon_property_change_mode.isra.1+0x3c/0x40 [radeon]
[ 72.808240] [<ffffffffa061bb2e>] radeon_connector_set_property+0x1ae/0x3f0 [radeon]
[ 72.809490] [<ffffffffa05284e2>] drm_mode_obj_set_property_ioctl+0x1b2/0x3a0 [drm]
[ 72.810736] [<ffffffffa052870f>] drm_mode_connector_property_set_ioctl+0x3f/0x60 [drm]
[ 72.811961] [<ffffffffa0518fef>] drm_ioctl+0x1df/0x680 [drm]
[ 72.813175] [<ffffffff8105e9ac>] ? __do_page_fault+0x2ec/0x600
[ 72.814402] [<ffffffffa05f404c>] radeon_drm_ioctl+0x4c/0x80 [radeon]
[ 72.815649] [<ffffffff811da5f0>] do_vfs_ioctl+0x2d0/0x4b0
[ 72.816899] [<ffffffff811ca161>] ? __sb_end_write+0x31/0x60
[ 72.818124] [<ffffffff811da851>] SyS_ioctl+0x81/0xa0
[ 72.819332] [<ffffffff8153db29>] system_call_fastpath+0x16/0x1b
[ 72.820528] Code: 00 00 00 80 ff 77 00 00 49 b9 00 00 00 00 00 ea ff ff 48 01 d8 48 0f 42 15 e8 b9 66 00 48 01 d0 48 c1 e8 0c 48 c1 e0 06 49 01 c1 <49> 8b 01 f6 c4 80 0f 85 0e 01 00 00 49 8b 01 a8 80 0f 84 83 00
[ 72.823135] RIP [<ffffffff811ac636>] kfree+0x56/0x1a0
[ 72.824394] RSP <ffff8807fcd33a30>
[ 72.825653] CR2: ffffec2003fffe00
[ 240.461007] INFO: task Xorg.bin:1534 blocked for more than 120 seconds.
[ 240.462414] Tainted: P O 3.17.4-1-ARCH #1
[ 240.463701] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 240.465017] Xorg.bin D 0000000000000007 0 1534 1533 0x00000000
[ 240.466325] ffff8807fcd333b0 0000000000000082 ffff880808b264a0 00000000000145c0
[ 240.467623] ffff8807fcd33fd8 00000000000145c0 ffff880812e73250 ffff880808b264a0
[ 240.468886] 0000000000000080 0000000000000140 0000000000001e00 000000000000000a
[ 240.470155] Call Trace:
[ 240.471435] [<ffffffff813113db>] ? bit_putcs+0x30b/0x590
[ 240.472702] [<ffffffff81539519>] schedule+0x29/0x70
[ 240.473964] [<ffffffff81539986>] schedule_preempt_disabled+0x16/0x20
[ 240.475239] [<ffffffff8153b445>] __mutex_lock_slowpath+0xe5/0x250
[ 240.476495] [<ffffffff8153b5c7>] mutex_lock+0x17/0x30
[ 240.477770] [<ffffffffa0522f32>] drm_modeset_lock_all+0x42/0xd0 [drm]
[ 240.479016] [<ffffffffa056d07f>] drm_fb_helper_pan_display+0x2f/0xf0 [drm_kms_helper]
[ 240.480257] [<ffffffff8131683a>] fb_pan_display+0x9a/0x160
[ 240.481508] [<ffffffff81310950>] bit_update_start+0x20/0x50
[ 240.482732] [<ffffffff8130e15e>] fbcon_switch+0x3ae/0x5e0
[ 240.483936] [<ffffffff81385899>] redraw_screen+0x1a9/0x250
[ 240.485175] [<ffffffff8130d54a>] fbcon_blank+0x23a/0x340
[ 240.486375] [<ffffffff8113e74f>] ? irq_work_queue+0xf/0xa0
[ 240.487587] [<ffffffff810c476c>] ? wake_up_klogd+0x3c/0x60
[ 240.488771] [<ffffffff810c4a12>] ? console_unlock+0x282/0x460
[ 240.489894] [<ffffffff810d5d33>] ? internal_add_timer+0x63/0x80
[ 240.490988] [<ffffffff810d6c54>] ? mod_timer+0x114/0x250
[ 240.492058] [<ffffffff813863ba>] do_unblank_screen+0xaa/0x1d0
[ 240.493075] [<ffffffff813864f0>] unblank_screen+0x10/0x20
[ 240.494053] [<ffffffff812b7019>] bust_spinlocks+0x19/0x40
[ 240.495011] [<ffffffff810186b4>] oops_end+0x34/0xe0
[ 240.495982] [<ffffffff8105df4c>] no_context+0x17c/0x3c0
[ 240.496934] [<ffffffff8105e2bd>] __bad_area_nosemaphore+0x12d/0x250
[ 240.497886] [<ffffffff8105e3f3>] bad_area_nosemaphore+0x13/0x20
[ 240.498842] [<ffffffff8105ea04>] __do_page_fault+0x344/0x600
[ 240.499769] [<ffffffffa060fb4b>] ? atom_execute_table_locked+0x12b/0x3f0 [radeon]
[ 240.500709] [<ffffffffa060e7c0>] ? atom_put_dst+0x480/0x560 [radeon]
[ 240.501673] [<ffffffffa060dabb>] ? atom_op_test+0x9b/0x1b0 [radeon]
[ 240.502640] [<ffffffffa0678f8c>] ? evergreen_hdmi_setmode+0xd8c/0x1970 [radeon]
[ 240.503558] [<ffffffff8105ece2>] do_page_fault+0x22/0x30
[ 240.504494] [<ffffffff8153f9f8>] page_fault+0x28/0x30
[ 240.505441] [<ffffffffa0678f8c>] ? evergreen_hdmi_setmode+0xd8c/0x1970 [radeon]
[ 240.506373] [<ffffffff811ac636>] ? kfree+0x56/0x1a0
[ 240.507266] [<ffffffffa0678f8c>] evergreen_hdmi_setmode+0xd8c/0x1970 [radeon]
[ 240.508204] [<ffffffffa052b8d4>] ? drm_detect_hdmi_monitor+0x74/0xc0 [drm]
[ 240.509155] [<ffffffffa0681488>] radeon_atom_encoder_mode_set+0x178/0x3c0 [radeon]
[ 240.510085] [<ffffffffa0563986>] drm_crtc_helper_set_mode+0x356/0x530 [drm_kms_helper]
[ 240.511021] [<ffffffffa061b97c>] radeon_property_change_mode.isra.1+0x3c/0x40 [radeon]
[ 240.511944] [<ffffffffa061bb2e>] radeon_connector_set_property+0x1ae/0x3f0 [radeon]
[ 240.512875] [<ffffffffa05284e2>] drm_mode_obj_set_property_ioctl+0x1b2/0x3a0 [drm]
[ 240.513791] [<ffffffffa052870f>] drm_mode_connector_property_set_ioctl+0x3f/0x60 [drm]
[ 240.514728] [<ffffffffa0518fef>] drm_ioctl+0x1df/0x680 [drm]
[ 240.515632] [<ffffffff8105e9ac>] ? __do_page_fault+0x2ec/0x600
[ 240.516555] [<ffffffffa05f404c>] radeon_drm_ioctl+0x4c/0x80 [radeon]
[ 240.517455] [<ffffffff811da5f0>] do_vfs_ioctl+0x2d0/0x4b0
[ 240.518369] [<ffffffff811ca161>] ? __sb_end_write+0x31/0x60
[ 240.519267] [<ffffffff811da851>] SyS_ioctl+0x81/0xa0
[ 240.520176] [<ffffffff8153db29>] system_call_fastpath+0x16/0x1b
[ 360.455851] INFO: task Xorg.bin:1534 blocked for more than 120 seconds.
[ 360.456839] Tainted: P O 3.17.4-1-ARCH #1
[ 360.457713] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 360.458629] Xorg.bin D 0000000000000007 0 1534 1533 0x00000000
[ 360.459548] ffff8807fcd333b0 0000000000000082 ffff880808b264a0 00000000000145c0
[ 360.460442] ffff8807fcd33fd8 00000000000145c0 ffff880812e73250 ffff880808b264a0
[ 360.461294] 0000000000000080 0000000000000140 0000000000001e00 000000000000000a
[ 360.462160] Call Trace:
[ 360.463040] [<ffffffff813113db>] ? bit_putcs+0x30b/0x590
[ 360.463880] [<ffffffff81539519>] schedule+0x29/0x70
I do not see any errors in my Xorg.0.log file, but I've posted it here
Last edited by smpolymen (2014-12-06 04:04:55)

Ok, so I tried unplugging my HDMI monitor and that seems to prevent the hang. When I plug the monitor back in and try to have it detect, it hangs again. I tried connecting via DVI (desktop)-HDMI (monitor) cable instead and have the same issue. I wonder if my monitor is causing the issue (it is pretty flaky, taking several tries to turn it on,) although I find it odd that a bad monitor would cause the driver to hang. Maybe the monitor is not sending the right data to the driver to set the mode. I'll try to find another monitor and see if that resolves the issue.

Hang on copy: "btrfs-transacti:282 blocked for more than 120 seconds."

Lately (at least after upgrading to linux 3.15), when I try to copy lots of files between btrfs partitions, I'm getting these "IO hangs" (not sure what to call it) where I can use the system fine as long as I don't try to read/write from my btrfs /home. So I can log in as root and look around, but as soon as I try and ls some random dir within my btrfs /home, it blocks and I have to log in from a different tty to use the system.
A "sudo journalctl -b-1 |grep -i btrfs" will show stuff like
juli 17 14:25:54 arch kernel: [<ffffffffa049fadf>] wait_current_trans.isra.18+0xcf/0x120 [btrfs]
juli 17 14:25:54 arch kernel: [<ffffffffa04a12d8>] start_transaction+0x3a8/0x5c0 [btrfs]
juli 17 14:25:54 arch kernel: [<ffffffffa04a1547>] btrfs_join_transaction+0x17/0x20 [btrfs]
juli 17 14:25:54 arch kernel: [<ffffffffa04a6dd3>] btrfs_dirty_inode+0x43/0xf0 [btrfs]
juli 17 14:25:54 arch kernel: [<ffffffffa04a6eff>] btrfs_update_time+0x7f/0xc0 [btrfs]
juli 17 14:35:54 arch kernel: INFO: task btrfs-transacti:282 blocked for more than 120 seconds.
juli 17 14:35:54 arch kernel: btrfs-transacti D 0000000000000000 0 282 2 0x00000000
juli 17 14:35:54 arch kernel: [<ffffffffa04b0df6>] btrfs_wait_and_free_delalloc_work+0x16/0x30 [btrfs]
juli 17 14:35:54 arch kernel: [<ffffffffa04bb128>] btrfs_run_ordered_operations+0x1f8/0x2e0 [btrfs]
juli 17 14:35:54 arch kernel: [<ffffffffa04a0546>] btrfs_commit_transaction+0x36/0xa20 [btrfs]
juli 17 14:35:54 arch kernel: [<ffffffffa049c475>] transaction_kthread+0x1e5/0x250 [btrfs]
juli 17 14:35:54 arch kernel: [<ffffffffa049c290>] ? btrfs_cleanup_transaction+0x5a0/0x5a0 [btrfs]
juli 17 14:35:54 arch kernel: Workqueue: btrfs-flush_delalloc normal_work_helper [btrfs]
(see full paste at http://pastie.org/9399449)
There seems to be others with similar issues:
http://www.spinics.net/lists/linux-btrfs/msg34458.html
http://www.mail-archive.com/linux-btrfs … 33795.html
but no solution from what I can tell.
It may be that it would unhang itself if I waited a really long while, but haven't had the patience to wait and see yet. I do run nightly backups between the btrfs partitions and the computer seems fine each morning though …
Anyone know what to do about this?
Last edited by unhammer (2014-07-17 13:49:55)

Same thing for me when running rsync... It also corrupted my filesystem. So I restored from a backup and I'm using XFS@LVM@dm-crypt for the time being.
https://imgur.com/a/6gNhH

Info task systemd-shutdow:1 blocked for more than 120 seconds

On halting the system I receive these lines over and over (shutdown -r, or using GUI):
>info task systemd-shutdow:1 blocked for more than 120 seconds
>echo > 0 > /proc/sys/kernel/hung-task-timeout-secs
Here is the contents of journalctl for the last few days:
http://bpaste.net/show/d1b41dLoTYrKEthSXAQN/
Here is the output of dmesg:
http://bpaste.net/show/hcXNspocc4neg8Q683h5/
I will give you any other output you need. I am not sure what other logs would show more information concerning the shutdown process. If you would like a list of my systemd scripts, that is fine as well.
Thank you in advance.
Last edited by degmic71 (2013-10-08 22:40:03)

Thanks for the replies!
@Rexilion: To be honest I can't remember, I daily update the system.
I didn't notice the warnings in dmesg, only till now.
@anatolik: Yesterday I tried a few things:
- Installed Linux-ck (ck-bobcat)
- Removed some btrfs mount flags, now only: noatime,compress=zlib
It seems indeed to be btrfs related, because I don't have the issues (anymore) at the moment.
I cannot find the link at the moment, but I found a post on the Arch bug reports that it may be an issue when using compress=lzo instead of compress=zlib.
So at the moment no problems, but going to try out if I can reproduce the problem.
Thanks and keep you guys posted!
PS. Should I report this bug?
Last edited by beta990 (2014-08-09 20:06:38)

I have elements 10, the organizer wont stay open for more that a minute, i open it closes.

Hi all, I have elements 10 and the darn organizer will not stay open for more than a minute, which makes useing the program a pain in the butt. does anyone else have this problem and how did you fix it. Im running XP on an older machine in which the edit part works fine.HELP

Hold down your Shift key while launching the Organizer to get to the Catalog Manager. Highlight your catalog at the bottom of the window, and choose "Repair". Repeat, using "Optimize".
If that doesn't solve it, from the Catalog Manager, create a new catalog (with a different name).
Ken

Staying Signed in for more that 1 minute!!

My problem is staying signed in to my computer for more that 1 minute. If I sign in and do not use my site for a while (more that 1-minute) I get signed out and I have to go through the sign stuff again. My computer will close down al together. How can I stay ssigned in while not using my computer aor a few minutes?????

Did it start not syncing after the iOS 4.2 update?

Not regognising iPod for more that 2 seconds

Similar Messages

Maybe you are looking for