Not releasing to accounting

Dear all
One of the service invoice is not getting released to a/cing
it is showing error as below
Posting keys for account determination for transaction ZCS do not exist
Message no. F5598
Diagnosis
The posting keys necessary for account determination for transaction ZCS have not been set.
System Response
Because the posting key is missing, the system cannot generate any automatic postings.
Procedure
Maintain the posting keys necessary for transaction ZCS.
Please guide me in releasing the invoice to A/C ing

Go to OB40, double click on Transaction ZCS and check whether G/L Account is maintained. Also click on Posting key on top and see whether the respective Debit and Credit Posting keys are maintained. If you are not sure, check with your FI people.
thanks
G. Lakshmipathi

Similar Messages

Invoice Document not released to Accounting -Period was closed

Hi,
SD Invoices are not released to Accounting.Those documents are from previous period and also also those periods were already closed.
Now what should i do? if i want to release the invoice documents which are created in previous periods.Kindly advice me.
Thanks
Supriya

Hi Supriya,
Please open previous period for posting. Please follow the given below path:-
SPRO  Financial Accounting  Financial Accounting Global Settings  Document  Posting Periods  Open and Closed Posting Periods
Here you need to enter Posting Period Variant name assigned to company code and other detail like account number.
To know the Posting Period Variant follow this path:-
SPRO  Financial Accounting  Financial Accounting Global Settings  Document  Posting Periods  Assign Variants to Company Code
Or else you can take help of some FI guy.
Regards,
Anand

Billing documents should not be created when it is not released to accounti

Hi SD gurus,
In some situation, billing documents are generated but it is not released to accounting which results in mismatch between FI value and SD value. We go to VFX3 and see the list of billing documents and take corrective action.
Our requirement is that the billing document should not be generated when system is not releasing this billing document to accounting.
Please suggest a solution for this.
Regards,
Senthil.

Thanks giri.
For the following reasons, the billing documents are not released to accounting.
1. If the user wrongly chosen the billing type for the delivery.
2. After creating condition type, it has to be assigned in COPA. If we forgot to do it, billing doc will not released.
Our requirement is that if the billing document is not able create accounting document, the billing document itself should not be generated.
Hope this will be suffice to understand my issue and suggest a suitable solution.
Points will be rewarded.
Regards,
Kumar.

Output to be blocked for Billing documents, if not released to Accounting

Hi SAP Gurus,
We have a requirement, where the Billing documents should not be issued output, if they are not released to accounting.
The system should not allow the user to issue output for billing documents, if not released to accounting.
Regards,
sree.

Standard routine 62 should be able to suffice your requirement.
Provided output determination in billing doc should happen from output condition record (VV31).
If you manaully assign assign output type in billing doc, then system will overlook the requirement.
In addition to that if your output type is assigned with requiremrnt routine 62 in your output procedure.
Then till your release tke billing doc to accounting, you will not be able see output type determine in billing doc.
If you have doubt, whether the output type is getting determined properly or not.
Then output(header/item) screen in your billing doc(VF02), in menubar select Goto - then choose Determin. Analysis.
It will show message that due requirement 62, output determination didn't too place.
Regards
JP

Insufficient Authorization old Invoices Will Not Release to Accounting

I have some old invoices that will not release to accounting. Instead of trying to secure a new credit card from the customer how can I remove the credit card information/or trick the order into thinking it doesn't need it so that I can get the open billing documents to the customers open account?
Please any help will be appreciated.
Again the error message is insufficient authorization, need to get these documents released to accounting.

That is true...if it has been partially utilized in another Billing doc, then it wont let delete the lines...
So when this hapenned to me, this is what i did....and maybe this is not the best practice.
I first got a Manual authorization in the sales order. Now generally we get the auth. from a 3rd party application Delego. So when we did the manual auth, we just entered a fake Auth number. This way, we tricked the system to let us post the Invoice to accounts. But definitely it posted to the card receivable account insted of the customer account. Now the settlement of this item would fail because the Auth number is not valid but the settlement fails only after it does the additional G/l posting to post to the Clearing account. To clear off this clearing account posting, we created a credit memo for the same amount and again with a fake Auth so now when this credit is processed for settlement, it also fails but reverses the provious debit...so that all accounts are now all balanced out.
So now remains the customer....so we finally did a Debit memo equal to the original invocie amout and now this posts to the customers account.
I was unable to find any other solution and was skeptical of doing any enhancement or changes just for a single case. Pls also let me know if you come across any better ideas.

Billing Document not released to Accounting -Issue

Hi,
While releasing the billing document,it is not releasing to accounting and giving the below error log.
Thanks
Supriya

Diagnosis
    When condition "ZSCM" (application "V") was transferred to the value field "VV139" in operating concern "AFCO" in Profitability Analysis, the following became apparent:
u2022     The condition can take both positive and negative   values
u2022     The flag "Transfer values with +/- signs" has not be set in Customizing for value field assignment.
    Inconsistencies in the data could occur as a consequence.
System Response
    It is not possible to post the document in Profitability Analysis.
Procedure
    Set the flag "Transfer values with +/- signs" for the condition "ZSCM".
    You should set the flag "Transfer values with +/- signs" selectively for individual conditions if:
1. The conditions can take both negative and positive values (for example, in the case of conditions that describe a transfer price surcharge or a loss deduction).
2. The conditions appear several times in a billing document and thus cause a debit posting as well as a
    credit posting (this is the case, for example, when creating or cancelling reserves).
By activating the flag "Transfer values with +/- signs", you balance the positive and negative values in a
condition. You can thereby guarantee that the sum of the negative and positive condition values is displayed as the correct total value in the value field assigned to the condition.
Caution when in the production system!
    If you have already used condition "ZSCM" to post data in the production system, then the sign in
    Profitability Analysis may differ from the previous sign as a result of the flag "Transfer values with +/-
    signs" having been activated. See the F1 Help documentation on the field "Transfer values with +/-
    signs" or the OSS note 52849. If deviating signs occur, it makes sense to move condition "ZSCM" to a new value field! Contact your system adviser or SAP.
    The +/- signs are handled as follows for the flag "Transfer values with +/- signs":
    Billing document (normal) "trans.with signs" "trans.w/o signs"
     Debit posting                   negative     positive       (such as sales deductions)
     Credit posting                  positive      positive       (such as revenues)
    Credit memos/returns    "trans.with signs" "trans.w/o signs"
     Debit posting                   negative     negative       (such as revenues)
     Credit posting                  positive       negative       (such as sales deductions)
    Maintain Condition Assignment to Value Fields u2013 SD Condition
    Maintain Condition Assignment to Value Fields u2013 MM condition
Procedure for System Administration
Thanks
Supriya

Billing Document Not releasing to Accounting because of Condition Type

Hi,
We have used Sales Condition Type ZSCM(Which is a statistical condition type) in Billing Documents and they are already released to Accounting.Today we have created one more Billing Document with same Condition type ZSCM.But this billing document is not getting released to Accounting?
What could be the reason? Why it was released to Accounting before with the same condition type ZSCM and why it is not getting released to Accounting this time.
I am breaking my head to find the possible reasons...kindly help me out to find the problem.
1.Billing document 90005889 - has value 64.48462- and It has only 2 Items and it was released to accounting
2.Billing document 90005729 - has value 217.87960- and It has only 21 Items and it was not released to accounting and asking to activate +/- sing in KE4I transaction for the ZSCM condition type.
Why billing document 90005889 is released for accounting and why 90005729 was not released to accounting?
Thanks
Supriya

Hi,
There can be following possible reasons fo the samed :
1. If the specific GL account is not getting any assignment to CO object.
2. Also you need to check assignment with VKOA that whichever GL is assigned as per business process of Sales (the account which is going to be credited) and all relevant settings in VKOA.
3. Pls check all substitutions and validations if any connected with that condition type and GL. Becuase sometimes it may happen that because of calling some other application (for ex. Set or substitution as generally transportation of this element happen with entire hierarchy if you add your substition in the node.) at he time of posting of billing document. This has already happen with our business scenario.
4. Also check if this sales revenue GL is assinged to any set and if that set is called through any substitution ot validation.
Pls check all these possibilities and revert.
Thanks & Regards,
Taral Patel

Reg: Billing document not released to Accounting -Error

Hi Gurus,
I am facing a problem in Billing.I am creating a billing document and while saving the document it shows up the error " Credit Control area 1200 not assigned to Company Code 1000".
I have checked the enterprise structure and everything regarding Credit Control Area exists in the system.
I am able to create the billing document and release to accounting for the same company code for different payers.
But this error occurs unique to a particular Customer's Billing Document alone.
Please do provide me a solution to this error.
Regards,
Sarosh

Hi Ravi
Check in the enterprise structure wheather you have assigned correct credit control area to the (sales orgn+ dist channel + division) to your sales area . or not
Secondly check in VD02 wheather you have assigned any wrong credit control area or not
Regards
Srinath

Billing Document not released to accounting

System is not allowing to release the document for accounting. and even after saving the accounting document is not reflecting in document flow.
Please suggest the needful as to how to fix this problem. The material master contains standard price . Please suggest where else I need to check.

Proforma Invoice is like a dummy invoice which is generated for accompanying the delivery note or for approximate prices for the Customer. This will not generate any accounting document. Later, these proforma invoices are converted to final invoices. Billing types are classified as proforma or regular. If your billing type is classified as proforma, you cannot generate any accounting document for the same.
In the billing type, if the 'Blocked for posting' indicator is checked, you cant generate accounting document either.
Ravi.

Billing doc not released to accounting

Hi !
What can be the reasons that a billing document is not automatically released to accounting?
I know one reason - that is when there is a posting block assigned to the billing document type .
Plz correct me if I am wrong with the above reason,and plz provide if there can be other reasons as well.
Thanks.
Edited by: Shamik Sengupta on Feb 25, 2008 4:43 PM

Go to FS00 (Edit G/L Account) and assign a cost element to it in Edit Cost Element tab. Based on the name given to this G/L account you could correctly determine which category under which you could create it as a cost element.
Go to VF02, try clicking on the green flag and the system would throw an error.
Anaylze the error and try out transactions OKB9, VKOA to find out whether you have correctly maintained your entries.
Try running transaction FS00 and see whether the G/L accnt used for determination is valid in that particulat Company Code.
Sometimes the error could also be because the G/L accnt might required to be created as a cost element.
Let me know what is the error that you are getting. We can then propose a solution.
Reward if helpful
Regards
Ravi

Credit Memo is not released to accounting using VFX3 - Error

Hi SD gurus,
I have one problem. When the credit price adjustment is created and when the credit memo is created for the price adjustment. Credit memo is not passed to accounting. When i used to Release the document through VFX3 t.code i am getting error as Item Specified for invoice reference is not an invoice item.
I have simulated the same scenario in different system for me the it is creating the accounting document. But the user is unable to create the accounting document they are facing the above problem.
I have suggested them to cancel the credit memo and requested to recreate the invoice and check for release for accounting.
Please suggest whant could be the problem. It is urget.
Thanks in advance.
Regards.
SD Team

Hi SD Gurus.
I found the problem, The problem is due to the Posting status in Invoice header were the status shows error in accounting interface. For to rectify this cancel the invoice and recreate the same and it will get posted.
Regards.
SD team

Invoice not released to accounting: tax code issue

Hi All,
Iam getting an error while i released my invoice to accounting. No accounting document generated. the error is " Tax code V0 does not appear in any G/L account item Message no. FF753"
we have various condition types in our invoices. Only TAX condition type ZWST has tax code V0. rest of the condition types like basic price, cash dicsount, rebate condition etc do not have tax code assigned to them which is right since only tax conditions have tax code assigned to them and which is ZWST only.
My question is why the above error comes " Tax code V0 does not appear in any G/L account item Message no. FF753" . if I double click on the error message, system shows me the following
""""""""""""""""tax code V0 does not appear in any G/L account item
Message no. FF753
Diagnosis
The document entered contains a customer or vendor item with tax code V0. This does not occur in any of the G/L account or asset items.
Consequences:
If you have not entered the cash discount base manually, the system will set it to zero in this item.
If this item was paid with cash discount deduction and the cash discount amount contains a tax portion, the tax code entered is used for the backdated tax calculation. An automatic breakdown does not take place on the basis of the offsetting items.
Procedure
Check whether the tax code was set correctly. If necessary, correct it or enter "**".
There are, however, also situations in which it makes sense to enter a tax code manually which differs from the offsetting items, for example, during data acquisition.
Effects on Customizing
You can define when this system message is to be issued in accordance with your requirements.
In Customizing, choose Cross-Application Components -> Bank Directory -> Change Message Control.
The application area and message number can be taken from the technical documentation """""""""""""
I do not know what system is saying.Could anybody help.
regards
sachin

Hi Sonu,
Please refer SAP Note 112609.
Thanks & Regards,
Santosh

Billing Document is not released to Account -Error

Hi,
I am getting the below error while releasing the billing document into accounting.kindly help me
Error Log
             0900000165 000000 Document 0900000165 saved (no accounting document generated
             0900000165 000000 Enter a true account assignment object with revenues
            Long txt
                Detail
                 Diagnosis
                     You made an account assignment for 420100, a revenue
                     element, in controlling area 9000 to a cost center or
                     profit center.
                 System response
                     Cost centers and profit centers can carry revenues in the
                     R/3 System as statistics only. To ensure reconciliation
                     between FI and CO for revenue element 420100, a CO account
                     assignment object must record the revenues as a real value.
                     This object type is used for updating to the reconciliation
                     ledger.
                     In principle, it's possible for the R/3 System to
                     automatically derive this CO account assignment object, the
                     reconciliation object. However, all postings made in CO for
                     costing-based Profitability Analysis are logged in the
                     reconciliation ledger under "reconciliation object". In
                     this manner, the reconcilation ledger identifies the exact
                     values flowing into the operating profit. If you post
                     reconciliation objects during revenue postings to cost
                     centers or profit centers, you must do so while keeping the
                     interpretation of the reconciliation ledger reports in
                     mind. The sums of revenue postings to profitability
                     segments, cost centers, and profit centers cannot be broken
                     down further.
Procedure
    o   To avoid posting to reconciliation objects, make
        account assignments to a real CO account assignment
        object.
    o   If you want to post to reconciliation objects, you can
        change this message to a caution or a note for future
        users, or deactivate the message entirely. Use the
        Implementation Guide under "Controlling: General" and
        choose Change message control. Enter area KI and
        message number 166. If you do not enter an individual
        user here, the change is valid for all users.
Technical data
    Tech. data details
     Client
     Group Number
     Sales Document Number                  0900000165
     Item Number of the SD Document         000000
     Schedule Line Number                   0166
     Counter in Control Tables              00
     Message Identification                 KI
     System Message Number                  166
     Output Type                            E
     Message Variable 01                    420100
     Message Variable 02                    9000
     Message Variable 03
     Message Variable 04
Please help me
Thanks
Supriya

Hi Supriya,
The following step is missing in your configuration: So please check the following step:
Financial Accounting (New) - Financial Accounting Basic Settings (New) - Ledgers - Real-Time Integration of Controlling with Financial Accounting - Account Determination for Real-Time Integration - Define Account Determination for Real-Time Integration
The above step is used for:
You define account determination for the real-time integration of Controlling (CO) with Financial Accounting (FI).
You have two options for the definition of account determination:
Account determination without substitution (standard account determination)
The level of differentiation with which you want to trace the postings to Financial Accounting determines how many accounts you create and whether you assign transactions or object classes. You can assign the accounts as follows:
You specify an account for all reconciliation postings.
You assign an account to each business transaction.
You assign an account to each object class.
You assign an account to each transaction and to each object class.
Account determination with substitution
In addition to account determination without substitution, you can determine the reconciliation account using substitution. For this, you have to define account determination at least for the specification of the posting key. Furthermore, you can use substitution to refine account determination.
In contrast to when the reconciliation ledger is used, additional fields are available when real-time integration is used:
RCL_ICCF-BEKNZ
RCL_ICCF-RSEGMENT
RCL_ICCF-SSEGMENT
These fields are only filled by the system when real-time integration is used.
Caution
If you deploy the following functions, you may not use the additional fields in account determination:
You still use reconciliation posting instead of real-time integration.
You use real-time integration but you still have the reconciliation ledger activated so that you can use the reconciliation reports from Cost Element Accounting, such as CO/FI Reconciliation in Company Code Currency.
These functions use the reconciliation ledger data, which does not contain the additional fields.
For more information about defining account determination, see Define Adjustment Accounts for Reconciliation Posting.
Please let me know if you need more clarification
Thanks & Regards,
Venkataraju Khottari

Billing not releasing to accounting

Hi,
At the time of releasing Billing Document by T. code VF02 to accounting we are getting this error message,
u201CAssign condition type P101 in CO-PA and message no. is KE391.u201D
Please suggest how to solve this issue.

Hi,
Assign SD condition type P101 to CO-PA value fields because by assigning SD condition type to CO-PA value fields SD billing transfer takes place.
Path is spro> reference img> Controlling>Profitability Analysis>Flow of actual values>transfer of billing documents>Assign value fields>maintain assignment of SD conditions to copa value fields

Why Documents are not releasing to Accounting Automatically?any reason?

Hi,
Is there is any reason that these documents are not automatically being passed to accounting.Please help me to fix this issue.
Thanks
Supriya

Hello,
This is not just FICO consultant issue.
If you do not have sufficient configuration in VKOA, it cannot be generated.
If you have closed the period in FI, obviously the entries will not be posted.
If the user is not having authorization, obvisouly it fails to generate accounting documents.
There is no special configuration, but this is system behaviour. If something is not available, then it cannot generate the entry.
Hope you have gone through the points mentioned by me.
Regards,
Ravi

Not releasing to accounting

Similar Messages

Maybe you are looking for