Not responding without using sony xperia c4 for more than 7 hours

Hai, I am using Sony xperia C4 which i bought 20 days back My problem is when i keep my phone idle(i.e not using it for more than 7 hours), and then when i press the power button back, the screen turns black and not responding too. notification lights were on, and once i force shutdown my phone ,then the phone restarts and back to normal.. and that time my battery was in 20-30%... Please reply to this issue Thanks

I suggest that you try to repair the phone software using PC Companion..
Before repairing your device you may want to backup your information first. Check out this topic for more information on how to.
How to backup?
If the issue should still remain I think that this needs to be examined and fixed at a repair center. For more information about how to submit your phone for repair and where, contact your local support team.

Similar Messages

Can we use same program ID for more than one RFC scenarios

Hi experts,
            I am working on a RFC to FILE scenario. I have created one TCP/IP connection in SM59 with a program ID. Can we use this program ID for more than one scenario. I have written code as below
data: iquote type standard table of ZIQMD initial size 0,
      IPRODUCT type standard table of ZPMS initial size 0,
      wa_quote type ZIQMD,
      wa_PRODUCT type ZPMS.
CALL FUNCTION 'Z_CBT_RFC_QUOTEMASTER'
TABLES
    I_QUOTE       = iquote          .
CALL FUNCTION 'Z_CBT_RFC_QUOTEMASTER' in background task DESTINATION
'ID4'
TABLES
    I_QUOTE       = iquote          .
COMMIT WORK.
CALL FUNCTION 'Z_CBT_RFC_PRODUCTMASTER'
TABLES
    IPRODUCT       = IPRODUCT          .
CALL FUNCTION 'Z_CBT_RFC_PRODUCTMASTER' in background task DESTINATION
'ID4'
TABLES
    IPRODUCT       = IPRODUCT          .
    COMMIT WORK.
when i am executing the code like this. i am able to send the data to 'Z_CBT_RFC_QUOTEMASTER' , but iam not getting data for 'Z_CBT_RFC_PRODUCTMASTER' interface. ID4 is the connection that i have created in SM59. with program ID as ABCD.
              Can i use the same connection for all interfaces.Please help in this, if we can use same connection for all interfaces. then how to make changes in XI.
Thanks in advance.
Thanks & Regards,
Poorna.

Just tried this and I can confirm that my earlier understanding was correct!
One of my colleagues confused me out and the conclusion is,
1. You need a separate TCP IP Connection for every interface with a Unique program ID.
Regards
Bhavesh

How can I see if my program is for more than one user? We think we have bought in design for more users, but can not find out how to get in for more than one?

How can I see if my program is for more than one user? We think we have bought in design for more users, but can not find out how to get in for more than one?

If you bought a CC for team, you can log in at http://adobe.com and insert the e-mail that you gave at the moment at the purchase and than you can manage and see you product/plan/team.
If I was not clear you can use the following link to help you solving your issue:
Creative Cloud Help | Manage your Creative Cloud for teams membership
If your not clear about this situation, contact with an agent of Adobe, by chat or phone. Use the following link to see the type of support you have on this matter:
http://adobe.com/getsupport
I think this will help you.
Regards

My iPad does not restart, I have kept the button for more than 10 seconds and will not turn off. Please if anyone has any idea that I do, let me know. thanks

My iPad does not restart, I have kept the button for more than 10 seconds and will not turn off.
Please if anyone has any idea that I do, let me know.
thanks

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: You have to hold 2 buttons down together.

Use of same iTune for more than one iPod

I need to find out whether I can use the same itune in one computer for more than one iPod nano and one iPod video?

I looked at the article, but it doesn't help me know how once I have downloaded onto a nano, for example, the itunes knows that the next thing I connect is something different. My son hooked up his 20GB ipod last night after updating his sister's nano and now the itunes thinks his ipod is a nano. How do I get the itunes to recognize his ipod as the 20GB it is?

Using ONE Microsoft account for more than 100 Windows devices

I developed an application for company customers and it is listed on the windows store now. I need to use only ONE Microsoft e-mail for so many devices for my users. How to log in on all the devices with the same e-mail instead of creating one for each
user and for each new user?
Ahmed Abd El-Karim

When talking about the phone the maximum number of devices on a single account is 5. When it comes to Windows 8.1 on PCs and Tablets it's 88 but you can not use it on more than that.
If this is intended for company deployment you can do that using sideloading by either getting a sideloading key or joining the devices to a domain or using a company certificate for Windows Phones.
Deploying it via the Store is not a viable option there.

Trying to use the same ground for more than two channels (RSE configuration) with usb 6000

Hello,
I'm currently trying to set up a LabView code in order to get readings of voltage using 5 different locations simultaneously. I want to only use the first location as ground and obtain 4 voltage measurements between the ground and each one of the other 4 channels. I'm using a usb 6000 which for now allows me to use the same ground for only two channels. Is there a way to use the same ground for 4 channels?
Thank you,
Maria

You're right it is confusing the way I describe it so I ahve attached some pictures of the set up. The first figure is the cell filled with soil and the 5 probes inserted in it. The anode is placed at the left end of the cell and the cathode at the right end but they do not appear in the figure. I'm trying to use location 1 as gournd and take measurements of voltage from the following pairs: 1-2, 1-3, 1-4, and 1-5. The second figure is the DAQ I'm using. When I was trying to set up the RSE configuration, it was ussing ground A for the channels 6 & 7 (locations 2 and 3 in figure 1) but ground B for channels 4 & 5 (locations 4 and 5 in figure 1). What I am asking is which is the best way to use the signal from location 1 as the ground for all 4 channels. Is this more clear?
Thank you for your time!
Maria

Can I use the redemption code for more than one machine for Photoshop Elements?

I want to use the Photoshop Elements that I bought on more than one machine. Is that
possible using the Redemption Code? It says it was used with another Adobe ID.
Thanks

Hi Stover,
Typically you use the redemption code to retrieve your serial number for Elements products. The licensing for Elements allows the owner to install on two of their computers.
See these for reference:
Redemption Code Help
How many computers can I install Photoshop Elements on?
Hope that helps,
- Dave

HT1430 I am trying to reset my iPad to erase the passcode. Someone changed my passcode and I have not been able to access my iPad for more than 15 hours

I have tried resetting the iPad and trying to delete the iPad. It showed up as not being connected to the internet because the iPad was inactive. I connected it directly to my router but I think because the iPad says it is inactive it doesn't allow it to connect to the internet so that I can erase it.

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

How to use inbound exit class for more than one workflow step

Hi All,
In Offline Workflow Approval Scenarios where the work items are sent to outlook of non sap users inbox through workitem exit of the respective workflow item. Based on the user reply from outlook email(either approve or reject) which sends an auto reply to Offline user . We configure an inbound exit class and assign the same in the SMICM transaction. Based on the code written using SAP_WAPI function modules in inbound class exit offline user gets the user approval result and performs the action in SAP.
My question now Is how can we use this inbound exit class for all the steps of a workflow.
For ex: In a workflow I have a decision step followed by an activity step. First I will write the work item exit for the user decision step and inbound exit code for the user decision step and offline user executed the user decision step with approve action.
followed by that I have an activity step for that I will code a work item exit for that activity level but how can I user the same inbound exit class for the activity step as well .
Quick reply would be of great help for me.
With Best Regards,
Veni

For the outbound processing you have the option of replacing the workflow exit by chancing the bsp application of the extended notification (see note 1448241 solution as an example of how to do the change) and replacing the standard links with a "mailto:...".
As far as the inbound processing, that depends on what should be done in the activity step, if for example you have a bapi which executes what the user does you can call it in the inbound class instead of the user and then the relevant wapi (complete the workitem/raise event etc.).

How to use the stock locators for more than one subinventory

Hi,
We are working in Oracle Applications 11i.
We have 4 different inventory organizations. Each with one main subinventory. One of those inventory organizations MWN has a subinventory defined with stock locators. The other three have their subinventories not defined with stock locators.
Now, correct me if I'm wrong please, I cannot define a stock locator for an existing subinventory while there are onhand items in that subinventory.
So, We will define new subinventory(for each inv org) with stock locators and then do a subinventory transfer to the new relevant new subinventory organization.
The next point is: the user requests to use the same stock locators for the 4 inventory organizations. is this possible?
thank you...

We had the same issue recently.
Users wanted same locator in the same org under different subinventories.
We suggested 2 solutions
1) Make the 1st locator segment=subinventory name (e.g. East.A.3.10, West.A.3.10)
2) Add a character to the first locator (e.g. EA.3.10, WA.3.10)
They picked up the 2nd option.
Hope this helps
Sandeep Gandhi
Omkar Technologies Inc.
Independent Techno-functional Consultant
513-325-9026

HT4993 My iPhone will not let me stay on the phone for more than 4 hours after when it hits 4 hours and like 3 minutes it automatically hangs up. Need Help

This has happened to me a couple times and i am in a long distance relationship so phone time is really important. Each time the phone has hung up at 4 hours and 2 mminutes. Can this be fixed ? Is this a problem for apple or my network provider ?

It is likely a cellular provider issue. There are reports of this for many different brands of phones.

There is a way to use the button enhance for more than one photo at a time?

I have more than a thousand photos to edit, this can help a lot.

This might help:
http://www.feroxsoft.com/ibe/index.php.en
Regards
TD

Vista/Win7 - Using Aero for more than window decoration?

I was wondering if it's possible to use the 'glass' effect in java as found under Windows Vista and 7.
For example, windows explorer uses the glass effect for more than just the window decoration, there is also a bit below the titlebar containing the addressfield/navigation buttons/searchbar.
Is it possible to create something similar looking in Java? I realise this will kill off multi-platform support, but that can be worked around in other ways.
So far I've discovered that the dwmapi is needed to access the feature, but I'm unable to find a java implementation of it and don't have the knowledge to write my own.
So are are any libraries out there for this purprose, or does anyone have a simple example?
[edit]
Well if someone has the time/motivation to port it from another language,
VB: http://pscode.com/vb/scripts/ShowCode.asp?txtCodeId=67485&lngWId=1
C++ (Qt): http://labs.trolltech.com/blogs/2009/09/15/using-blur-behind-on-windows/
Edited by: Axeia on Jan 9, 2010 4:17 AM

so that's C++, VB and C# so far, still haven't found how to do it in java.Thats correct, if you want Vista aero effects only in your application, then you have to turn to platform specific languages like C#.
For java, you can make your own effects. So, what is your goal? using Vista Aero or making a good looking application?
For learning how to make good looking applications in java, one of the best books is ' [Filthy Rich Clients|http://filthyrichclients.org/] '. It discusses how you can make use of java libraries like Swing, Java2D, Java3D, animation libraries, etc. to develop nice applications. Check the examples given at the site (I like the StackLayout example). They made a 'Filthy Rich Client' also, called Aerith. (Check this)
I remember this book also discusses how you can achieve blurry translucent (Vista like) effect for Swing dialog. Its source is given on the same site, I also found its source here. So you can try it out, and check how java's aero looks like ;-)
Andrew gave you the link of the article about translucent Frames, I would like to mention that newly released JavaFX makes making translucent(transparent) frames more easier. Please check [this out.|http://javafx.com/samples/SwirlingSquares/index.html] And yes, JavaFX makes your application look really cool without much effort (I have not yet learned it, just saw the demos). You can also try out the demos of JavaFX here.
So, its up to you, Java can make your application look good, but without making use of Vista Aero.
Thanks!

In the evaluation mode im nt able to view my ocr result for more than 2 seconds

im doing my final year project on image processing using labview 2010(evaluation). im using a microsoft webcam(VX-700). my objective is character recognition using vision. im able to capture an image and store the same. the software also recognizes the characters after training the characters in vision assistance. but im not able to view the result string for more than 5 seconds. i really want to have some support regarding this issue. i've attached the program what i've used with this message. plz do help me with this issue asap.
Attachments:
OCR First Example with integrated2.vi ‏120 KB

Rudegar,
Our network is very stable and we aren't seeing any problems with anything else and besides, these worked fine until we did the update.
The wifi access point is in the same room about 6-8 ft. away and it's kind of hard to connect an appletv by ethernet to an iPad.
The appletv runs fine using it's built in applications, like Netflix, Disney, Radio, etc.
All of this makes me think it's not a wireless problem, but it's something in the appletv software after doing the update that won't hold the iPad connection.
I appreciate your suggestions and will pass your information along to our network person.
Any other ideas?
Thanks

Not responding without using sony xperia c4 for more than 7 hours

Similar Messages

Maybe you are looking for