Not right colour when printing picture

a black and white picture is printed with a blue/green colour/haze, anybody any clue on how to solve?
cartridges are oke. have them checked on the printer and in the store where i bought them.
problem can exist since i installed hp software for the printer from the internet........
hope to hear from someone.
i have a psc 1205 all in one printer.

Some of the troubles with printing could be addressed in the system update:
•Mac OS X 10.6.8 Combo Update v1.1
http://support.apple.com/kb/dl1399
{Usually if there were printer drivers (often are) for all of the main brands
of printers, these Combo updates included them; plus later or more
recent versions of these, are available from the maker's support site.}
I'm a bit curious if you'd tried a second-user account to see if (once set up
from scratch) that would give you some other information on how to go in
and re-set your main user account's print settings.
Some basic system issues can be resolved by simple things, such as in
the use of Disk Utility's 'repair disk permissions' that can affect almost all
things a user can do in the system.
•OS X Printer & Scanner Software Available for Download:
support.apple.com/kb/ht3669
•Mac printing and scanning on HP Support Forums - BoardReader:
http://boardreader.com/fp/HP_Support_Forums_1153782/Mac_printing_and_scanning_22 27042.html
[About old MacBooks, I can see by the OS X version that it could be
almost any MB prior to 2010 that could run Snow Leopard. My old
MacBook1.1 (coreduo, first edition MB 2006) can run it, but isn't.]
Been several years since I used an HP all-in-one, it worked OK until one
day it would not print. It pretended to print, the heads went back & forth;
but no ink came out. New cartridges, almost new HP device; checked
drivers (got newest) and as the unit was new-old-stock, the warranty was
gone in short order. A relative bought it ahead of need; clock was ticking.
So my current AIO is an Epson, bought it new at 55% off. Even has a
real phone modem for the fax. And it does OK prints. Not as good as
my older Epson photo printer, whose inks are harder to find now.
Anyway, hopefully you could fine the helpful paper usually included with
the HP printers, a quick reference set-up guide; they have Mac info, too.
Good luck & happy computing!

Similar Messages

  • Address Book "Note" is truncated when printing and syncing

    I just upgraded to 10.5.2 and this is still a problem: The "note" section of a contact in the Address Book is truncated when syncing to my iTouch (and I've heard the same problem for the iPhone). I haven't run into a limit to the amount of text you can type in a Contact's note section on the Mac. I have some Contacts with rather lengthy notes. But when printing a Contact (and checking the box for the Note to be included) it prints a long note in two narrow columns on one page and if the note won't fit on one page, it truncates it. Even less of the note gets sync'd to the iTouch. If this isn't fixed soon, I'm going to go back to Outlook and my Axim pda. I gotta have my Notes!

    Address works with Phonetic Name. Doesn't like the Name only for some reason.
    Solved!

  • "Prop bitmap dll not loaded" message when printing PDF

    Getting "Prop bitmap dll not loaded" message when printing PDF.  Message started occuring after Adobe Reader upgrade to version 11.  
    Windows XP
    Lexmark P6250 printer
    Firefox v17.0.1
    Adobe Reader v11.0.0
    Thanks;
    Paul

    Can you try to install the latest Lexmark printer driver (http://support.lexmark.com/index?segment=SUPPORT&userlocale=EN_US&locale=en&productCode=LE XMARK_P6250&page=product).
    If that does not help, see this thread http://social.technet.microsoft.com/forums/en/officesetupdeploylegacy/thread/6bdf9d5d-1b14 -4789-b6ee-3aff66889f42

  • Reader 11.0.4 will not collate pages when printing. Using OS X 10.6.8

    Reader 11.0.4 will not collate pages when printing. Using OS X 10.6.8

    I'm not 100% sure, but I believe you need Acrobat Pro for that.

  • Colors don't match when printing pictures on J4860 all-in-one

    When I print pictures, the colors are not true.  It doesn't matter what software I use, but usually it's Photoshop CS3.  I thought it was my monitor - that I wasn't seeing the true colors in my files.  But I've been able to verify that the colors on screen match the subject in the photo.  The prints from the HP J4860 do not match the screen images.  I currently have new ink, and they are new HP cartridges, not generic or refilled cartridges, but this has been a problem through many ink cartridge replacements.

    Hi there.
    I don't know if there is much we can do to improve your output.  First off, I want confirm you are using an OfficeJet J4680.  We don't have a J4860.
    Could you post an image that is unsatisfying, and let us know what you dislike?  I'm going to involve a color expert here, and he'll look to see if we can do anything. 
    regards, CF
    I work for HP and hope to make your day Sproutastic!

  • Hp laserjet pro color mfp will not wake up when print tasks are initiated!

    Is there anyone that can assist me with a HP LaserJet color printer mfp 200 that weill not "WAKEUP" when print tasks are sent to the spooler?

    These settings are for setting up your wireless printer to stay connected to your router, keep wireless devices better connected and make your router secure and hack proof.
    1. Set a static IP in the printer (click here) outside the DHCP range of the router (check your manual). 
        This is for Linksys routers but can be used for all routers.  Verify your DHCP range and change this
        first if needed.  More Wireless Printing help is here.
    2. Verify in the printer that 'Auto Off' is disabled.  Use the Embedded Web Server (EWS) by going to the  
        printers IP address in your browsers address bar, click  Settings Tab/Auto Off.  Or use the Printer
        Assistant, Printer Home Page (EWS). 
    In the router:  (Refer to your router manual for information)
    3. Use a fixed wireless channel like 1, 6 or 11, never 'auto', try channel 1 first then the rest. 
    4. Set router to 20Mhz only, or 145Mbps depending on router. 
    5. Always use WPA2-AES (Personal) encryption, but you can try ‘mixed’ mode. 
    6. Disable WPS and never use it and disable UPnP for the routers security.  Nobody can hack your
        system now and helps with wireless connectivity (if you want to know why, search the web). 
    7. If you have a dual band router (2.4Ghz and 5.0Ghz bands), make sure the SSID’s are NOT the same,
        they must be different for all bands, even for any Guest networks. 
    8. Save all settings.  Power off both, wait 2 mins.  Power on router wait 2 mins. 
    9. Power on printer and verify it reconnects to router. 
    Windows 7/8/8.1   Is Network Discovery on or off?
    Control Panel/Network and Internet/Network and Sharing Center/Advanced sharing settings.
    Under Home or Work (current profile) / Network Discovery.
    Select "Turn on network discovery" and save changes.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • Notes cut off when printing, issue with margins

    When I print a slide with notes, the notes complete cover the width of the page, flush left and right. My printer cuts the margins automatically (not a bleed), so those portions of the text in the notes gets cut off.
    Any way to control the margins, left and right, when printing notes from Keynote?

    Keynote print layout is a bit of a mess, and is well commented on by users, it prints differently than previous versions, eg  in handouts the slide image is much smaller than previously, in grid, the slides are off the printable area on the left.
    We are hoping this is fixed in the round of scheduled updates.

  • Presets not taking affect when printing via adobe reader

    I have discovered that after upgrading to Mavericks, when printing multiple page documents via Adobe Reader, it will not take on my 1-sided printing preset and instead prints 2-sided as per the default setting on the printer driver.
    Has anyone come across this?

    kirstyfiona wrote:
    I dont seem to have the option for printing on both sides on the adobe print screen. In the past it would just use whatever preset you currently had set.
    I seldom use Adobe Reader except for completing forms and printing them.  Preview never seems to get those right.  I did do some testing on my Mavericks machine and can confirm that Adobe Reader is ignoring a Preset I created for my EPSON WorkForce 1100.  From the CUPS debugging log it would appear that Adobe Reader is bypassing the Apple print window.  It would not therefore be picking up a Preset.
    Wht make and model of printer are you using?  If your prnter uses a PDE to set duplexing, I can imagine that Adobe Reader is not going that deep.  It would look at the PPD and just use whatever is in there.  If you let me know the printer make and model, I may be able to confirm that.  I am not sure that will get you any closer to a sulution.  It may help answer "why".

  • Drop shadow affects background colour when printing to PDF

    I have a diagram in AI format with drop shadows against a coloured background. When I print it from Illustrator to PDF, the background colour around the objects with drop shadows is slightly out, leading to a "blocky" effect. Also, some lines that overlap with the drop shadows are thickened.
    I've embedded the diagram in a FrameMaker file and the same problem is evident when I create a PDF from FrameMaker.
    The problem is partially solved by saving a copy of the file as an EPS, and embedding this in the FrameMaker document. The "blocky" effect then goes away, but there are still some overly thick lines.
    Here is what the PDF image looks like:
    Thanks for any light anyone can shed on this problem.

    All the colours in the picture are process colours. I found the page  you refer to earlier, but it didn't seem to apply to my problem. Thanks  anyway.
    I've read around the Web, and it looks as  though the problem is to do with the fact that drop shadows are a raster  effect rather than a vector one. I think this means that the areas  around the drop shadow get rendered in RGB, while the rest of the  diagram is in CMYK.
    Anyhow, as I said, the problem  seems basically to have been that I wasn't using a high enough quality  set of job options for output.
    I inherited these diagrams from a previous colleague, and by selecting "HQ Print with bleed marks" I get them as good as he got them, though as I said the thick lines are still there (as they were in his documents).

  • Accents are not being shown when printing

    Hi.
    When I print a webpage that contains characters with accents some of than simply disappear, even though the page is displayed correctly on the browser.
    This happens especially in uppercase letters.
    Does someone know of some configuration I can make to solve this problem or if there is a bug involved?
    I'm using Safari for Windows 7, version 5.1.7.

    Hi,
    Refer to this link...[box not seen in smartform print   |box not seen in smartform print]

  • Margins not lining up when printing back and front of an image

    How can I get multiple images on 1 page to line up when printing on both sides?
    Dimensions are 3.5x2.5, 9 to a page. They are sportscards for son's baseball team.
    They are slightly off by 2-3 cm on all 4 sides and in betweeen. Extremely frustrating. I tried printing in Photoshops but text is blurry. In Lightroom, Images look absolutely perfect. If they would only line up. Please help! Using a Canon MG 6200 if that matters.

    You should be able to change you printer's settings outside of applicaitons such as Lightroom. If you are unsure how to do this, you will need to contact your printer manufacturer for instructions.
    As for compensating in Lightroom, Victoria means changing the settings within Lightroom so that they are "incorrect" to make up for the fact that you are not getting the expected results.

  • Some frames are not being shown when printed but it is there in print previ

    Hello Experts,
    I am currently developing a form in smartform wherein I need to put frames in all cells. When
    I print preview, all the frames are there. But when I print it, some of the frames are not shown.
    What could be possibly the problem?
    Thank you guys and take care!

    Hi,
    Refer to this link...[box not seen in smartform print   |box not seen in smartform print]

  • Not clear text when printing JTextField

    I print (laser/inkjet printing) a panel with multiple JTextFields setting background of both panel and textfield to white and border to null. The problem is that the letters on paper do not apear clear but digitized. (I use Arial font). I have implemented a class to handle the print of a class of type of JPanel but not of JTextField. Is this the problem? Can you suggest a class that implements the print of JTextFIelds which are inside of a JPanel?
    Thank you in advance

    Hi Dimitar, thanks for your replies. I'm using 2048M, when I do File -> Print, I can see I have 464 pages in my diagram, and I can see all boxes, relations, and text also, no problem, everything shows on the screen.
    The issue comes when I either print to file or send to the printer, the text is missing in both cases, the printer here in the office has 4G of memory, there does not seem to be a problem or delay when printing, it just comes out with no text; the Mac laptop I'm using has 8G of memory. I was scaling the pages to get a smaller number of pages printed, but I followed your advice and did not scale down, left it at 100%, with same results. I'm wondering if this is something related to Mac OS X 10.6 ?
    Thanks.

  • Custom colors in FrameMaker 10 not being maintained when printing PDF using Distiller/Professional X

    Hello all,
    I am working my first tech writing job that requires printed material instead of just PDFs, and I am having problems with the logo colors when it comes to printing them.
    I created the two color definitions in FrameMaker 10 (using colors Pantone 485 CVC and Pantone 281 CVC). These colors are used for diagram callouts and doc titles.
    I recently upgraded to Distiller X and Acrobat Professional X, thinking that maybe the older versions just didn't support those colors, and I am still getting the same result. Instead of printing the colors I added, the PDF is printed with the default red and blue. FrameMaker is using the CMYK model.
    I have a feeling that I just need to adjust some settings, but I don't know whether to adjust Distiller, Acrobat, or FrameMaker. Anyone else have issues when trying to use their company's colors? Any ideas on what might work?
    Thanks in advance,
    Smitty

    John,
    I'm not even sure what printer we use since we send the PDFs out to be printed on a glossy paper (I'm new to the position so I don't have all the details yet). All I use is my Adobe PDF printer. I'm also not using FileMaker, I'm using FrameMaker since I am producing manuals that will be printed, not marketing material or anything with a lot of images. I am just trying to get the logo colors to appear correctly in the PDF so that when it does get printed off-site, the Pantone colors are seen and not the default in the final product. I will post this in the FrameMaker forum as well.
    Thanks for your response.
    Smitty

  • Issue with HelveticaNeue text not being included when printing to Adobe PDF?

    I have a document (Word 2010 docx) with a section of HelveticaNeue text on the front page that when printing through Adobe PDF the text does not appear.
    Using Acrobat 9.4.6
    Tried the same document with:
    Win2Pdf - Displays correctly
    Converted to .doc - Displays correctly
    File\Save as PDF - Dispalys correctly
    Any ideas? I can post the document up here but I can't see an option to.

    You can try disabling the “Rely on system fonts only: do not use document fonts” option in printer properties.
    To do the same.In MS Word:
    Goto File -> Print
    Select Adobe PDF as printer.
    Click on "Printer Properties".
    Go to "Adobe PDF Settings" tab.
    Uncheck the “Rely on system fonts only: do not use document fonts”
    Click Ok and try printing the document
    Also update your Acrobat to latest version 9.5.0.
    You can download the patch form: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5330

Maybe you are looking for

  • Using DBAdmin to backup to external FTP server

    /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bo

  • OS 4.5 upgrade for AT&T on a BB Curve 8310 4.2.2.170

    I called AT&T twice about the upgrade to 4.5 and both times their support desk (611 on any AT&T handheld) had no idea what I was talking about and/or where and when I can upgrade. Can anyone tell me if a) AT&T has authorized and released the upgrade

  • Problem in loading data to ODS from Flat File

    Hi, I am trying to load data from Flat Flie. i.e the records like below. Customer   Material Calday Price 100            1           20080519 20 200            2           20080520  30 I inserted the Customer in Key Fields and Material & Calday & Pri

  • TO confirmation : L_TO_CONFIRM

    Hi , I am using function module -L_TO_CONFIRM , to confirm the TO in custom code . but not able to handle the the partial quantity confirmations. i mean if there is a actual quantity of 45 and I need to confirm only 12 units , it confirms the complet

  • Linksys e2000 guest connections, limit bandwidth

    How can I limit bandwith speed of guest accounts? Or are there free softwares available to do something like that? It's kinda like the hotspot softwares - where we can set hourly, daily, monthly allowances and see a report on their connectivity. Plea