Not running 64 bit version of iToons?
I've downloaded the 64 bit version of itunes and installed it. But I'm when I look at the task manager, I'm still running the 32 bit version. I've uninstalled itunes twice and reinstalled. Still running 32 bit version.
This is on a new i7 machine running Windows 7 Pro 64 bit.
What do I have to do to get the 64 bit version running?
Thanks,
Brian
But I'm when I look at the task manager, I'm still running the 32 bit version
That's okay. The itunes.exe process is 32-bit, so what you're seeing there is normal on a 64-bit system (most of the itunes componentry is 32-bit).
In itunes itself (in the 64-bit versions), with the most recent versions I've checked for, the iPod Service is 64-bit, the iTunes miniplayer, and the GEAR drivers (for importing and buring CDs) are 64-bit.
In the related programs, Apple Mobile Device Support is 64-bit and most of BonJour is 64-bit.
Apple Application Support, Apple Software Update and QuickTime are all 32-bit.
Not sure about the situation with the MobileMe control panel on 64-bit systems at present (if you're running that too).
Similar Messages
-
Can I run 32 bit version of Oracle 10g grid on Linux x86-64?
Since Oracle did not release 64 bit version of Oracle 10g grid for Linux X86-64. Can I run 32 bit version of Oracle 10g grid on Linux x86-64? If so did anyone tried this? and also any known issues?
All I had to do was use the 32bit version of "/usr/bin/gcc" and "/usr/bin/g++" to run the installation
That is:
bin]# cp -p /usr/bin/gcc /usr/bin/gcc_old
bin]# mv /usr/bin/gcc /usr/bin/gcc323
mv: overwrite `/usr/bin/gcc323'? y
bin]# ln -s /usr/bin/gcc296 /usr/bin/gcc
bin]# cp -p /usr/bin/g++ /usr/bin/g++_old
bin]# mv /usr/bin/g++ /usr/bin/g++323
mv: overwrite `/usr/bin/g++323'? y
bin]# ln -s /usr/bin/g++296 /usr/bin/g++
AFTER INSTALLATION REMEMBER TO
move back the 64bit files to their former state.
bin]#rm /usr/bin/g++
bin]#rm /usr/bin/gcc
bin]#mv /usr/bin/gcc_old /usr/bin/gcc
bin]#mv /usr/bin/g++_old /usr/bin/g++ -
MDT 2012 U1. No problem with PXE booting so WDS is not the issue.
The NIC in question is the Intel I217-LM, which resides on both the new Dell Optiplex 9020 and the Latitude E7440. I downloaded the Dell drivers and then the Intel drivers and imported them into the WindowsPE drivers folder in the workbench. Updated
the boot images to make sure the new drivers were injected. Both yielded the same result. I can do everything I need to do when booting to the 64-bit LiteTouchPE_x64.wim boot image, but not the 32-bit version. When booting to the 32-bit
version, I get no IP configuration info at all.
When looking at the drivers in MDT, I see only one difference: the supported OS versions. The 64-bit driver supports 6.1, 6.1.1, and 6.2. The 32-bit driver supports only 6.1.1 and 6.2. Not sure if that's the issue.
Tried using drvload within 32-bit WinPE to manually inject the NIC driver. Still no luck. Ipconfig yields no configuration at all.
If I can't get these machines to boot to the 32-bit boot images, I can't deploy 32-bit images, unless there's a way of which I'm unaware.
EDIT: A little extra background. My WindowsPE folder has two subfolders called x86 and x64. Obviously, 32-bit drivers go into the x86 folder and 64-bit drivers go into the x64 folder. Then in the properties of the deployment share a
selection profile is selected which points to the architecture-specific folders.Specifically what do you see when you are in WinPE, press the F8 button, and run ipconfig.
1. ipconfig shows no network adapters (see:
http://myitforum.com/cs2/blogs/rpedersen/clip_image002_53DA17D4.jpg ). This means you still have not loaded the correct device drivers, check the c:\windows\system32\wpeinit.log file.
2. ipconfig shows an "autoconfiguration IPv4 Address" with a netmastk of 255.255.0.0. This means that the client did not get an IP address from the DHCP server. Double check the connection between the client and the DHCP server.
3. ipconfig shows a correct address. There is no problem. :^)
Keith Garner - keithga.wordpress.com
I get the first result. Absolutely no network adapters, which I assumed indicated no appropriate device driver.
This is the result of the wpeinit.log from the machine booting to the 32-bit boot image:
Info WPEINIT is processing the unattend file [X:\unattend.xml]
Info Spent 1747ms initializing removable media before unattend search
Info ==== Initializing Display Settings ====
Info Setting display resolution 1024x768x32@60: 0x00000000
Info STATUS: SUCCESS (0x00000000)
Info ==== Initializing Computer Name ====
Info Generating a random computer name
Info No computer name specified, generating a random name.
Info Renaming computer to MININT-TFRU2BT.
Info Acquired profiling mutex
Info Service winmgmt disable: 0x00000000
Info Service winmgmt stop: 0x00000000
Info Service winmgmt enable: 0x00000000
Info Released profiling mutex
Info STATUS: SUCCESS (0x00000000)
Info ==== Initializing Virtual Memory Paging File ====
Info No WinPE page file setting specified
Info STATUS: SUCCESS (0x00000001)
Info ==== Initializing Optional Components ====
Info WinPE optional component 'Microsoft-WinPE-HTA' is present
Info WinPE optional component 'Microsoft-WinPE-MDAC' is present
Info WinPE optional component 'Microsoft-WinPE-WMI' is present
Info WinPE optional component 'Microsoft-WinPE-WSH' is present
Info STATUS: SUCCESS (0x00000000)
Info ==== Initializing Network Access and Applying Configuration ====
Info No EnableNetwork unattend setting was specified; the default action for this context is to enable networking support.
Info Acquired profiling mutex
Info Install MS_MSCLIENT: 0x0004a020
Info Install MS_NETBIOS: 0x0004a020
Info Install MS_SMB: 0x0004a020
Info Install MS_TCPIP6: 0x0004a020
Info Install MS_TCPIP: 0x0004a020
Info Service dhcp start: 0x00000000
Info Service lmhosts start: 0x00000000
Info Service ikeext start: 0x00000000
Info Service mpssvc start: 0x00000000
Info Released profiling mutex
Info Spent 749ms installing network components
Info Spent 1669ms installing network drivers
Error QueryAdapterStatus: no adapters found.
Info Spent 0ms confirming network initialization; status 0x80004005
Info WaitForNetworkToInitialize failed; ignoring error
Info STATUS: SUCCESS (0x003d0001)
Info ==== Applying Firewall Settings ====
Info STATUS: SUCCESS (0x00000001)
Info ==== Executing Synchronous User-Provided Commands ====
Info Parsing RunSynchronousCommand: 1 entries
Info Command 0: 0x00000000
Info Successfully executed command 'wscript.exe X:\Deploy\Scripts\LiteTouch.wsf' (exit code 0x00000000)
Info STATUS: SUCCESS (0x00000000)
Info ==== Executing Asynchronous User-Provided Commands ====
Info STATUS: SUCCESS (0x00000001)
Info ==== Applying Shutdown Settings ====
Info No shutdown setting was specified
Info STATUS: SUCCESS (0x00000001)
At first I thought the first bolded section might be relevant, but when I booted to the x64 boot image, which works fine, I get the same message in its wpeinit.log file. The only difference between the two log files is that the x64 boot image actually
shows successful installation of a driver where the second bolded section is. -
How to Delete 32 Bit Version of CS6 (but not removing 64 bit version)?
I created a bit of a problem. I have CS6 on a Win 7 64-bit system. I originally installed only the 64 bit version, but then several months later I installed the 32 bit version (don't ask why). Now the following file types are associated with teh 32 bit version: tif, tiff, psd and cr2 (I have associated jpg with a different program, so they are not a problem). I have tried to change the file association by (1) using Control Panel > Default Programs > Associate a file type to associate with the 64 bit version and (2) specifiying the default program from the context menu when right clicking on a file. All to no avail, as these files remain associated with the 32 bit version of CS6.
So I decided to uninstall the 32 bit version. But that won't work either. As you can see from the image, below, I can uninstall the 64 bit version but not the 32 bit version, which is the exact opposite of what I want to do.
I will be happy for any suggestions, either to uninstall the 32 bit version or to get Windows to make the association between the tif, psd and cr2 files and the 64 bit version of CS6.
Thanks for your help.
Best regards,
DavidBecause it's a text report and not a selectable list. BTW, just leave them, they only waste a small bit of disk space and don't affect performance.
-
Downloaded 4.0 and it will not run on my version of OS X
I have a MAC OS X 10.4.11. I downloaded Firefox 4.0 and when I went to run it, it says "can not run with current version of OS X".
I need to either get to run 4.0 or to run the Firefox version I way previously using. I am at a loss and really would appreciate help to get back to Firefox.
Thanks, Don CostanzoYou can get an unofficial, community-supported version of Firefox for 10.4 here:
http://www.floodgap.com/software/tenfourfox/ -
Asks to run 64-bit version though i'm running it
Cannot find my iPhone. Ask to run 64-bit version though i run it! Tried to re-install but no result
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
Launch button for PS CC runs 32-bit version of program, not 64-bit version
I'm starting to get reports from people that after initially installing PS CC that the launch button created during installation launches the 32-bit version of PS CC instead of the 64-bit version.
To check which version you're running, click Help>About Photoshop... on the menu bar.
The version that shows up should have "x64" at the end for the 64-bit version of the program.
If the version is "x32", you can get a launch button for the 64-bit version inside the application folder--C:/Program Files/Adobe/Adobe Photoshop CC (64-bit).
So far this appears to be an issue just with Windows computers.Tony,
It is not an issue, By default on a 64 bit Win machine both PS 32 bit and 64 bit application get installed.
If you want to work with 64 bit application launch Adobe Photoshop CC(64 bit) from Start->Programs, Otherwise for 32 bit Ps Adobe Photoshop CC.
To still verify the launched version, the steps you mentioned would help.
Regards,
Ashutosh -
ITunes 9.0.2 64 bit version run 32 bit version, does not open.
I am running Window 7 Home Premium 64 bit and I recently downloaded the 64 bit version of iTunes. The first time I installed it everything worked fine, in fact I spent hours uploading all of my physical media.
Today, the very next day, I double clicked on the icon and nothing happened. When I opened the task manager to see if the process had begun, it had. However, it was labeled iTunes.exe *32, which I believe means the 32 bit version of iTunes.
I tried to run it in the Windows XP SP3 compatibility mode, but the same thing happened. iTunes.exe *32 is running, but there is no GUI.
Thanks in advance for any help.Nope, this copy of Windows 7 was installed from scratch on a freshly formatted disk but three weeks ago and has never seen Norton or McAfee. It does have MS Security Essentials on it. Oddly enough, the XP that is able to run iTunes is extremely old (at least two motherboard upgrades ago, in fact - almost 9 years) and has seen Norton and McAfee installed/deinstalled thru the years, getting whatever product was free that year when I bought TurboTax , and is currently running McAfee.
I whacked at the problem again over the weekend, this time disabling absolutely everything at startup/login, including the Creative XFi helper apps, MS Essentials, and the ATI video helper apps - only MS standard startup processes - yeah, still no help.
At next reboot I started iTunes and walked away. Some indeterminate time later (at least an hour), iTunes finally came up. That seems to be the behavior now (and may always have been, but I have little patience for software too stupid to at least have an error log) - launch it and it finally appears a long, long time later.
Makes it pretty much useless. Good thing the wife loves her new iPod Touch and it can download wirelessly from the store, otherwise I wouldn't be working this hard . -
I downloaded the update itunes 10.6 and My computer won't install it. It sais that the program is a 32 bit version that I needed to download the 64 bit version. But it was the 64 bit version. I am thinking about getting rid of my ipod and itunes. I wish I hadn't upgraded. Now I can't even use itunes. It loads up but it won't go onto itunes store.
You already have Shockwave Flash 10.2 r152 installed for Firefox on the PC you used to post here, see your ''More system details...'' next to your posting.
There are no 64-bit builds of Firefox made, only 32-bit currently. There are some 3rd party builds floating around out there, but Mozilla doesn't allow them to be named Firefox - they would be called Namoroka for 3.6 versions. Mozilla does have a Minefield 64-bit build for 4.0-pre versions, but it won't be available as Firefox until probably Firefox 5 is released.
If your situation is with a different PC than what you used to post here: <br />
1.Download the Flash setup file from here: <br />
[http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe Adobe Flash - Plugin version]. <br />
Save it to your Desktop.<br />
2. Close Firefox using File > Exit <br />
then check the Task Manager > Processes tab to make sure '''firefox.exe''' is closed, <br />
{XP: Ctrl+Alt+Del, Vista: Shift+Ctrl+ESC = Processes tab}
3. Then run the Flash setup file from your Desktop.
* On Vista and Windows 7 you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). <br />
See this: <br />
[http://vistasupport.mvps.org/run_as_administrator.htm] -
I my macbook pro will not recognize my iphone. I had the AppleStore, re-install my original software a month or two ago, but since they did this, my computer cannot recognize my Iphone it is telling me that I also need to download the new version of Itunes, but keeps telling me my system isn't running the correct software. When I go to update my software, it's telling me I'm running the latest version??? HELP!!
you need to upgrade your OSX to 10.6.8 or later to sync with the iPhone 5. as you need itunes 10.7 to run Iphone 5
-
PLEASE HELP ME!!
I have a BB Storm2 9550. I had a laptop with Outlook 2007/Windows Vista/BB Desktop 5 and it synced fine.
I now have a new laptop with Outlook 2010/Windows 7/ BB Desktop 6 and each time I try to configure the Organizer Data to select 'Outlook' for Calendar, Memo, Tasks, and Contacts and select NEXT I receive an error in Intellisync that says 'The Operation Terminated Unexpectedly'.
I have tried completely uninstalling BB Desktop manager from the Application Data folders and registry, reinstalling 6.0, downgrading to 5.0 (which gives me a Microsoft Connector Error).
I have also tried reinstalling Outlook. I read all of the posts concerning Outlook 2010 64bit but I am running the 34bit version.
Please help me. Right now I don't have any contacts on my BlackBerry and I am so frustrated. I have tried to fix this for over a week now and all the posts I read don't seem to resolve my issue or I don't understand them.
I'll even take suggestions for other ways to sync my data besides outlook (although that is not my preference)
Thank you
Solved!
Go to Solution.Log in to an account that has administrator privileges.
Open a command prompt.
Type cd C:\Program Files\Research In Motion\BlackBerry Desktop\IntelliSync\Connectors\MS Outlook Connector.
Type regsvr32 MsOutlookConnector.fil and press Enter.
Note: For BlackBerry Desktop Manager 6.0, please use the following path:
C:\Program Files\Research In Motion\BlackBerry Desktop\IntelliSync\Connectors\MS Outlook Connector
Note: The following error message might be displayed when step 3 has been completed:
The module msoutlookconnector.fil was loaded, but the call to DLLRegisterServer failed with error code 0x80070005
If this happens, turn off the User Accounts Control (UAC) and register the MsOutlookConnector.fil file again.
To turn off the UAC in Windows Vista, complete the following steps:
Go to Start > Settings > Control Panel.
Under User Accounts and Family settings, click Add or remove user account.
Select one of the user accounts or the guest account.
Under the account, click Go to the main User Account.
Under Make changes to your user account, click the Change security settings link.
Under Turn on User Account Control (UAC) to make your computer more secure, clear Use User Account Control (UAC) to help protect your computer and turn off the UAC.
Click OK.
Restart the computer.
Give this a try it could be that the connector to ms outlook never registered properly. -
On my firefox start up screen, I get the message that I am not running the latest. It asks that I upgrade now. However, under "about firefox," I am running 9.01, the latest version. I'd like to know why I'm getting this message and how I can get rid of it.
Thank you.Hi jerzyguitar,
You may see that message below the Google search box on www.google.com/firefox which is the old Firefox default home page. That page is no longer being maintained by Google.
You should try changing your home page to:
about:home
If you don't know how to change the home page, you should take a look at the Knowledge Base article [[How to set the home page]].
Hopefully this helps -
I am running OSX 10.4.11 on my iMac; Firefox automatically updated to version 12, and now it will not run on my computer.
Is there a way to deinstall the new version while keeping my saved bookmarks, etc?
If not, how do I deinstall 12 and reinstall the older version of Firefox that worked with my operating system?
Thanks.[[Firefox no longer works with Mac OS X 10.4 or PowerPC processors]].
You can install Firefox 3.6 from [http://www.mozilla.org/en-US/firefox/all-older.html http://www.mozilla.org/en-US/firefox/all-older.html]. Please keep in mind that not only is Firefox not receiving any updates (thus rendering it insecure), neither is Mac 10.4 or any of the plugins used on it. Running such an old Operating System is dangerous to your information's security on the internet. something for you to keep in mind. -
Windows not reading 64 bit version of itunes
so i had a jailbroken ipod for 2 years and have updated itunes and i wanted to get rid of it and when i went to restore the ipod it itunes told me to download the new version so i did and when i went to plug my ipod in it said itunes does not register uninstall itunes and reinstall the 64 bit version so i did and when i plugged it back in i got the same message i even tried to delete itunes completely off the computer read everything on the page to make sure it was the 64 bit version of itunes and still gave me the message and i went to the apple store in my city and they told me it may be the ipod because of the jailbrake and they restored for it me and i came back to try again gave me the same message deleted and downloaded it again still doesnt work
im also getting a message as soon as itunes opens saying cant connect to store unknown error (-3212) i dont know if thats part of the problem or not just thought id put that inso i had a jailbroken ipod for 2 years and have updated itunes and i wanted to get rid of it and when i went to restore the ipod it itunes told me to download the new version so i did and when i went to plug my ipod in it said itunes does not register uninstall itunes and reinstall the 64 bit version so i did and when i plugged it back in i got the same message i even tried to delete itunes completely off the computer read everything on the page to make sure it was the 64 bit version of itunes and still gave me the message and i went to the apple store in my city and they told me it may be the ipod because of the jailbrake and they restored for it me and i came back to try again gave me the same message deleted and downloaded it again still doesnt work
im also getting a message as soon as itunes opens saying cant connect to store unknown error (-3212) i dont know if thats part of the problem or not just thought id put that in -
Have downloaded V801 but panel under search bar says I am not running the latest version
I downloaded latest version 801 the first time it loaded it was ok but every time since then the bar under the google search bar say I am not on the latest version with a triangle and ! . I have checked the help bar and this says I am upto date. I have deleted Firefox and re-installed- same problem. Have checked through update page and it says firefox is up to date
Do not know what else to tryYou may see that message below the Google search box on www.google.com/firefox which is the old Firefox default home page. It appears that page is no longer being maintained. You appear to have the latest Firefox 8.0.1 installed
*See --> https://support.mozilla.com/en-US/kb/Finding+your+Firefox+version
*You can also see your version on the ''Help > Troubleshooting Information'' display
If you want the Google search page as your home page, a new, updated version is now built-in to Firefox. Reset your home page to '''''about:home''''' for that new display.
*See --> http://support.mozilla.com/en-US/kb/How+to+set+the+home+page
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Maybe you are looking for
-
Questions about web services and BPEL in ALBPM
Hi all, We are currently evaluating various BPM products in order to decide which one to use. Currently I am evaluating ALBPM Studio 5.7 and I am running my processes on the embedded engine provided with the studio. I have some questions: 1. We want
-
Dear all, could you know how to cheak a class is defined in JSP or not ? for example, I made a class called "staff" and import it in other page so, how to check the "staff" is imported ? Thanks, Jack.
-
Oracle 8i Lite: Command Object Creation Failed
Hi Everyone, I use Windows XP everything works except navigator and I get the message that Command Object Creation Failed Does Anyone know how to fix this and I have to use 8i Lite as it for a school database project Thanks in advance for everyone's
-
ASM on Solaris 10 without Veritas ?
Looks like most ASM documentation assumes Linux or Solaris Veritas ? Is it possible to use inherent Solaris functionality and RAW as ASM devices, if not what aer the storage options
-
Is it possible to configure SRA Gateway so it redirect external requests with "short" urls to internal portal? https://gateway.abc.lt/banklogin.do -> https://gateway.abc.lt/http://psrv1.abc.lan:8080/banklogin.do Can it be achieved using additional Re