Not saving changes from Develop to Library

Not sure what I am doing wrong. I have made my changes, and am ready to export them to JPEG, however, it is reverting back to the original on both the Library tab and in the exported image. When I click on Develop, it is perfect.
Is there a step that I am missing, or a setting somewhere, I may have overlooked?
Thanks!

Try this links:
For Windows
ftp://ftp.adobe.com/pub/adobe/lightroom/win/3.x/
For MAC
ftp://ftp.adobe.com/pub/adobe/lightroom/mac/3.x/
// Jani

Similar Messages

I use itunes to store my music but I use Virtual DJ Broadcaster to play it. Somehow itunes has changed from Itunes Music Library to Itunes library. Virtual DJ does not Recognize the change.

I use itunes to store my music but I use Virtual DJ Broadcaster to play it. Somehow itunes has changed from Itunes Music Library to Itunes library. Virtual DJ does not Recognize the change. Virtual DJ at present seeing an older version of my libraries. Is it possible to Save my last library and Playlist and re-name everything else in my itunes account so it will again show "Itunes Music Library" Past libraries are of no consiquence . I'm hoping removing everything except the last Library on my computers will make Virtual DJ recognize it. I tried renameing the Library to "Itunes Music Library" but it did not work. I fear the problem is in the Registry and without the correct path I am reluctand to play around in there. Any help would be appreciated.

Incidentally, my first thought was to map a network share from the NAS to my computer, so that my music files appear on the Z: drive, say on my computer. I could then set up iTunes to store music etc in that folder, and to copy all new items to that folder. However, if I do that, all that'll happen is that on my NAS, the library file will become out of date as I add music to the collection but not to the index.

Stocks App not saving changes

My stocks app is not saving changes no matter what changes I make. After making a change, I'll exit the app, re-enter and it defaults back to a whole bunch of stuff I didn't add.
Can someone help me with this, I'm not sure where to even start!

Nadia Bielawa wrote:
This did not help at all. I'm not about to restore my iPhone and set everything up again, there must be a simpler solution.
Th simple solution is restart.
If that fails, thenreset.
If that fails, then restore from backup.
If that fails, then restore as new.
If that fails then make an appointment at the genius bar.

IDVD 06 not saving changes?

Greetings. I teach an adult ed class in iLife. Unfortunately, the lab has old single 533 G4s. When we use iDVD 06, the program is not saving changes made in the different drop zones, etc. We place elements in drops zones, tell the program to save, quit and relaunch...nothing saved.
This problem was repeated by a student on his G5 at home.
Any ideas?
Thanks.
Michael Colin
Mac G4 Single 533 Mac OS X (10.4.4) Problem on G4 and G5

Hw much free space is left on the macs?
Plenty. These are very small projects we're working on.
Thanks for the response.
Michael
Mac G4 Dual 533 Mac OS X (10.3.9)

Why does my my noise reduced picture go back to noisy when i go from develop to library to export it?

after editing my photo and specifically using noise reduction i will go from develop to library so that i can export it but when i do the oise reduction disappears. any ideas?

It could be just a lag in the updating of the thumbnail shown in the Library. Wait a few seconds and see if it updates.
Since what you see in the Library is just a thumbnail, the data being exported comes from elsewhere and is recalculated each time you do the export.

Fast_start_mttr_target has NOT been changed from default

I did a raccheck on my new installed RAC nodes. OS is linux redhat, oracle version is 11.2.0.3.
raccheck results has one : fast_start_mttr_target has NOT been changed from default.
Our existing unmigrated system has not set up fast_start_mttr_target.
Do we need to setup this parameter?

The fast_start_mttr_target enables you to specify the number of seconds the database takes to perform crash recovery. You need to set optimal value.
Refer below link before setting this parameter
http://docs.oracle.com/cd/B13789_01/server.101/b10734/rcmtunin.htm#1008706
Regards
http://www.oracleracexpert.com
Oracle Flashback Data Archive - Oracle Total Recall
http://www.oracleracexpert.com/2012/06/oracle-flashback-data-archive-oracle.html
Backup and Restore MySQL Database
http://www.oracleracexpert.com/2012/06/backup-and-restore-mysql-database.html

The songs on the iPod on Itunes are grey and can not be changed while in the library are ok, what happen?

the songs on the iPod on Itunes are grey and can not be changed while in the library are ok, what happen?

Connect the device to your computer.
Open iTunes.
Select iPhone, iPad, or iPod in the Devices list.
Click the Summary tab and select "Manually manage music and videos".
Click Apply.
Even when you have enabled manual management, you can still sync some content automatically. Select any content tab, such as Video, to enable automatic syncing for that type of content.

NOT SAVING CHANGES OR EDIT'S!!PLEASE HELP

hey guys,
i had this problem before along with many others, with the earlier vers of iphoto. until apple gave us the fix...now agin with 5.0.4.any changes or edits(redeye fix) are not saved to any of my pics!!
is anybody else having this problem??
is there a fix or update??
please help......thanks.

Hi sunny,
Check the permissions on the Library and Pictures folder. If they are set for you, make sure the library is not locked.
Get info on the iPhoto Library folder
screenshot of how the "get info" window should look for your user
If edits are not saved it could be the image files are locked, especially if these files came from another computer or sent to you in email. Do a "get info" on these files and unlock them.

Enhancement in IDOC_INPUT_ORDERS not saving changes after order creation

I have an enhancement at the beginning of the IDOC_INPUT_ORDERS function module used to create sales orders via EDI. In the enhancement, I take the data records and make some changes to some quantities and units of measure. After making these changes, I let the function module continue on as normal. The order does get created with my changes in them, however, the IDoc doesn't reflect my changes.
Here's an example: An EDI order comes in with 6 EAs of a material. In my enhancement, I change it from 6 EAs to 2 3PK. I then let it go on its way. The order gets created fine with 2 3PKs, however the IDoc after its a ll done still says 6 EAs.
The enhancement runs before the FM puts the data into the tables it uses. I tried using the last user exit to open the IDoc and editing it there using the EDI_DOCUMENT_OPEN_FOR_EDIT FM but it says its open.
Can anyone give me any clues on how to make my changes stick to the IDoc?
Thanks,
Curtis

Ok, I figured out why it's not saving. Not realizing it, but the tables are passed into the FM by reference, so what I'm changing is only a copy. So what I tried to do is use the 004 (I've also tried the 005) user exits to try to update the actual DB. I used the following FMs (EDI_DOCUMENT_OPEN_FOR_EDIT, EDI_CHANGE_DATA_SEGMENTS, and EDI_DOCUMENT_CLOSE_EDIT). The problem is that I can't change them because the IDoc is still open.
Does anyone have any ideas on how I can achieve my goal of changing the IDoc?
Thanks,
Curtis

How to port database changes from development to a production environment

How do I port database changes from the development to the production environment?
I am using v8 and have always had to redo everything using the schema manager all over in the production environment. Is there an easy way to generate a script, for example to dump the database changes on the development machine to be executed later on the production machine?

This should already be a clearly defined change control process. Once a procedure, function, package, trigger, or whatever completes the testing rounds, it should be promoted to production.
Forgive me if it seems I'm trivializing, but I don't see the problem, just copy the object(s) from your software library (or development) into production using whatever tool works best or has been chosen. If you are doing data copies then you have various options again including good old export/import.

Tonal change between develop and library module

After having applied some changes in the develop module when I switch back to the library module I am experiencing a sever foreground tonal change? I can add that the foreground in this particular photo had a grad filter applied. The tone shifts from a cool blue to a purple? Shooting with a nikon d5100 with ADL turned off as per other similar problems brought up in this forum. Which by the way I still experience but have learned to live with is that after import of RAW picture looks good for about a second then exposure changes.

dennis4g1 wrote:
After having applied some changes in the develop module when I switch back to the library module I am experiencing a sever foreground tonal change? I can add that the foreground in this particular photo had a grad filter applied. The tone shifts from a cool blue to a purple?
Are you using a calibrated/profiled monitor? In Develop module, LR displays in ProPhoto colour space, in Library module it's Adobe RGB. If the monitor doesn't have a proper profile there could be differences in view between Develop and Library. However I would have thought LR would default to assuming monitors behave like sRGB if there's no profile (or no colour space info in the profile).
dennis4g1 wrote:
...Which by the way I still experience but have learned to live with is that after import of RAW picture looks good for about a second then exposure changes.
The usual cause for that is that Adobe can't read Nikon proprietary metadata such as Picture control settings. If you shoot with the Nikon Picture Control setting (Standard, Portrait or whatever) at default settings, and if you use the corresponding profile in Lightroom's "Camera Calibration" panel (Camera Standard, Camera Portrait etc) then the appearance should be very close to the out-of-camera jpeg preview appearance.

Crystal Reports 8.5 not saving changes to report criteria

When I use the formula editor to add new criteria to the report criteria formula, the changes are not saved when the report is closed. It doesn't seem to matter how I exit the formula editor, and I've even tried "save as" and saving the report to a new name prior to closing. When I reopen the report, the changes are gone.
Sometimes the changes don't even last that long - they often disappear while doing a refresh.
Are there and known bugs that I haven't found - or better yet, any solutions?

Hi Roberta.
I've had this happen a few times as well. Usually though a message will come up at some point in time saying. If the report is locked when you open it, either because someone else has the same file opened in Crystal or if you open the report from an e-mail attachement, a message will come up saying something in the lines of the report cannot be saved and it must be saved to a new file.
When you do the Save As, where are you saving it to? Try creating a new folder and saving it to that folder. You should have full permissions to the new folder and I'm hoping it will save. I just want to eliminate any problems with permissions. After you save the file, check the properties of the file. Did the file's date and time update or does it still have the original date?
When you open the report in Crystal, go to File on the menu bar and make sure Save Data with Report is not checked. Make your changes and rerun the report and save it again. See if that helps.
These are the two common problems I've had when this happens to me.
Hope this helps,
Brian

Profile Imanges are not getting deleted from Profile Image library

Hi,
If I go mysite and edit my profile and set a profile images and save the changes. Image is uploaded to profile Image library in the root of the mysite.
I Edit my profile again and this time I remove the profile image and save the changes. Image is not getting deleted from the profile Image library.
as per my understanding it should get deleted. My site clean job is running. user profile is active in AD.
Thanks
Omkar

My first question would be is it a big deal if the picture doesnt get deleted from the libarary? My understanding is that the profile picture field is a URL link, the first time you add a picture it will provision 3 copies of differing sizes to the
library. When you "remove" the picture, it just empties out the picture URL field. Which is a nice hidden recovery if someone accidently deletes a profile photo they really wanted (Or if your company really locks down picutures so you only get
a choice of a couple avatars instead of a personal photo).
Similar issue:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/17bc8538-568f-4fff-8933-458fdba4b701/delete-user-profile-picture-in-sharepoint-2010-when-account-is-deactivated-or-deleted-from-ad?forum=sharepointadminprevious
and response:
Since the user photo library follows certain standards OOB:
http://iedaddy.com/2010/12/sharepoint-2010photo-management-for-social-mysites/
I would say just create a small script that will periodically read the UPS and make sure there are no photos sitting in the library not associated to an account... here's an example of accessing the User Profiles w/ Powershell:http://iedaddy.com/2010/06/sharepoint-2010-updating-user-profile-properties-with-powershell/
You would just modify it to delete image files whose name is not associated to an existing NTName in the UPS.
ieDaddy
Blog: http://iedaddy.com
Twit: @iedaddy

Aironet 1242ag - not saving changes

dear friends...
i am struggling with this devices now from some time.. not sure where is the mistake ...when i am trying to configure wireless device (AP) from web using exprerss setup or nornal manual mode .. it is not saving any changes.. means clicking on apply button does not do anything .. infact its not getting clicked... please see the screen shot attaced ..my express setup menu is different then the one mentioned in this link
http://happyrouter.com/how-to-configure-a-cisco-wireless-access-point-ap-from-scratch
any still if you make any changes and refresh the page it comes back to 10.0.0.1 ip which is shown on the screen shot...
guys any help will be really appreciated ...
or if someone can also share the commands to configure the same... but before commands i want to sort out my above issues...

Hi,
The simpleset configuration would be something like as below.
dot11 ssid TEST
vlan 1
authentication open
interface Dot11Radio1
encryption vlan 1 mode wep mandatory
interface Dot11Radio1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface Dot11Radio0
encryption vlan 1 mode wep mandatory
interface Dot11Radio0
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface FastEthernet0
encapsulation dot1Q 1 native
no ip route-cache
duplex auto
speed auto
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface BVI1
ip add x.x.x.x y.y.y.y (where x.x.x.x is the ip address whichyou want to assign and y.y.y.y is the subnet mask)
ip default-gateway x.x.x.x (where x.x.x.x is default gateway which you want to use)
Hope that helps
Regards
Najaf
Please rate when applicable or helpful !!!

Cisco Prime Soft Appliance not saving changes to syslog.conf

Greetings,
I'm having an issue with the syslog.conf file on a Cisco Prime LMS 4.2.4 soft appliance with a Solaris base. My workplace uses local4 as the logging facility for its network devices, and according to a discussion I found on this site, I need to add the line:
local4.info /var/log/syslog_info
I have attempted this several times; we're approaching at least 5 attempts today. I have attached text files created from putty logs where I've attempted to make the necessary change. I appreciate any assistance the community can provide.
Regards,
Rob

Hi, Afroz,
I really appreciate your assistance, but I'm afraid my hopes have been dashed. The syslog.conf reverted to its original configuration. I will go through my steps to be sure that I understood your suggestion properly.
I edited the syslog.conf to put all messages from local4 in /opt/CSCOpx/conf/syslog-entries.txt. Then, I exited the shell to the console, issued the 'write mem' command, and closed the session. Upon my reconnection, I found that my changes to the syslog.conf were not saved.
Did I make the correct edits in the correct places? Another question, is this bug present in the versions of Prime LMS running Linux and/or Windows, or does it only exist in the soft appliance running Solaris?
Regards,
Rob
Edit:
I'm reading the "Installation and Migration of Cisco Prime" PDF, and it gives me the impression that Cisco Prime is only supported as Windows, Solaris, and soft appliance installations. Is that correct? If it is correct, then installation of Cisco Prime LMS is not supported on other Linux distros such as Ubuntu Server, CentOS, Fedora, etc.?
My thanks.

Not saving changes from Develop to Library

Similar Messages

Maybe you are looking for