Not Saving Properly

I've noticed that when using Save As to rename a file after making changes in the original file, the changes are not actually saved in GB 3.0.4. So, I've tried Save As, then a plain Save for the new file. Still the changes are not registered by the computer, although the changes are evident on the track in GB. If I try to add the supposedly new file to the audio track in Keynote, the old file without the new changes is inserted. The only way to get the changes to register computer wide is to perform a Save As with the new file name, quit GarageBand, reopen the file, then do a Save. Then and only then will Keynote see the desired file with all the changes. Can anyone else confirm this? I've tried deleting GB prefs to no avail. I do have create preview checked in GB Preferences. This is a very unusual and frustrating problem.
Mac OS X (10.4.8)

Yo hangtime, I've now heard from your Keynote equivalent guru, and he thinks you've found the best workaround out there. His guess, like yours and mine is that the GB preview file is not being updated properly, or that keynote is not accessing the properly updated preview file. Either way, your workaround works. Of course, sharing the file from GB to iTunes also works without all the extra steps. So for now I'll assume there is no straightforward, easy way to go about it. Maybe in the future. Thanks again.

Similar Messages

Adobe acrobat has recovered one or more documents that were not saved properly

Hello,
I am getting the following error and cant seem to fins anything about it anywhere
"Adobe acrobat has recovered one or more documents that were not saved properly before Acrobat was shut down click yes to open the recovered document click no your changes will be lost. "
This comes up numerous times a day. Does anyone have any idea to what it might be related to? Some seting? Looking for a direction to troubleshoot.
Running Acrobat X standard, fully updated, Windows 7.

Same problem.
Clicking yes or no does not stop the pop up to come over and over again.
Copied the file "unsaved", renamed it and deleted the "unsaved" one.
No success, pop up with message Adobe acrobat has recovered one or more documents that were not saved properly continues
It is very disturbing when working with tough deadlines
Using Acrobat Pro 9.5.5 (updated)
Please help

Voice memos app not saving properly

I am using an iphone5 running iOS7.1.1 and performing the following actions will cause Voice Memos app not saving recordings. I have sent a feedback to Apple but is wondering if anyone else is found having similar problems.
1) Run Voice memos app and start recording
2) At lock screen open camera app and take a picture
3) At same lock screen delete the picture taken
4) Lock screen will show RECORDING in progress
5) Open Voice memos app and it will also show RECORDING in progress
6) Save voice memo from app and the duration FROM the point of picture deleted WILL NOT be saved

same here ... iPhone 3gs/32 gigs ram/ios 4.3.1 ...
the app doesn't seem to work any more, and hasn't for some time:
"buttons" are unresponsive, or they appear to respond, but don't perform their function ... erratic behavior ...
very disappointing as this has gone on for some time ...
We appear not to be the only ones ...
Anyone with a solution?
Thanks

Keynote (and other iWork apps) not saving properly!

Hi all
I have had some strange problems over the last few weeks where I get messages telling me that iWork (usually Numbers) cannot save the files as 'something else' is using the file. So I click 'save anyway' and I get strange files in folders, ie folder and file name is the original name plus some gooblygook.
I have got round this by deleting the 'extras' and carrying on. But now I am preparing a major presentation in Keynote and suddenly it is not saving graphics some of the time!
For example I was working on a slide - and suddenly got a message that 'some problems occured' -
Couldn’t save image. - image.png (Slides: 12, 13, 17, 18; Skipped slide count: 1)
Couldn’t save image. - image.png (Slides: 12, 13, 17, 18; Skipped slide count: 1)
I have been working with this presentation for some time and have never encountered any problems - passing between my laptop and my iPad to review and modify (mainly viewing on the iPad and editing on the MacBook).
Any ideas what is happening? I have a major presentation to give in just over a week and I don't want to use PowerPoint!
Thanks
Ian

I've been having some success NOT using any files that have previous images or audio in them, starting from a base template and then adding audio and video and photos that are already on my hard drive, not previous Keynote files. Today I needed five slides that were part of another deck and, you guessed it, they were corrupted (or missing) when I reopened the file, only the thumbnails remaining.
I closed the original Keynote file, placed a zip extension, then control- clicked to see the contents. The images were missing from the package. I then replaced the extension with .key and reopened in Keynote. The audio file had been there but not the images or the drawing, which I then searched for.
Yes, delete the weird file backups and make a backup of the original in the finder. Then lock it! (You're using Mountain Lion?)
I have a huge presentation tomorrow. I have five backups, including on a thumb drive.
How much longer Apple?

Text not saving properly in Acrobat Pro XI

I use Adobe Acrobat XI Pro. When I use the add text function, everything shows up correctly. I save the file and close it. Later on, when I open the saved file, some of the text (especially capital letters and symbols) show up as little boxes with an X in them. I have to highlight, cut, and paste everything in order for the text to show back up. Once it happens one time, it usually does not happen again. However, if I open up a document, fix the boxes, add additional notes, those notes then turn into boxed Xs the next time I open the document.
How do I fix this?

Hi rdh2209,
Is Acrobat 11 updated to the latest patch v11.0.09?
Does this happen with any specific font?
Try repairing Acrobat and check if it resolves the problem.
Regards,
Rave

My TiddlyWiki is not saving properly in FF4.

I just upgraded to FF4. Now, when I try to save my TiddlyWiki after editing, it always fails to actually save. It tells me it has saved, but the next time I open the file, everything new is missing. Is there a fix for this?

I most often do not restart my new MBPro .... 10.9.5 ..... but happened to a day or so ago, and it immediately began to block / problem with email .... I waited to see if it sorted out, but no .....
I get he server “p06-imap.mail.me.com” cannot be contacted on port 993 ..... then deselected SSL and that did not help, so went back and selected it again .... and again not working .....
I can see my stuff "online" but I do not want to do it that way EVER .....
your "deselect mail" in ICloud preferences .... did nothing good for me .... any other thoughts Linc ?? in fact, some hundreds of in and sent emails did not show up .... I'm hoping they are going to when this gets fixed .... but hey, ..... right now I'm NOT in business ....
thanks

Illustrator CS6 files not saving properly as PDFs??

Prior to printing my work, I save PDF versions of my files. More often than I'd like, when I print the PDF file from my computer, some of the graphics do not print correctly. For example, a portion of a curved graphic (like a swirl) might be cut off leaving a blunt straight edge.
Does anyone else have issues with PDF files? Is there anything I can do to control this quality issue?
Thank you.

I had a similar issue, where a file saved in Illustrator looked incomplete when it opened in Preview (a colour logo was rendering in black only).
As far as I'm concerned, the point of a PDF is that it can be seen/read universally, so this is a fail, and opening it in a different program is no fix.
My workaround was to select and copy all the graphics in my Illustrator document, then open Photoshop and paste to a new document as a smart image. I then double clicked the smart image logo in the layers to edit it in Illustrator, from where I saved it as a PDF. For whatever reason this saved the PDF correctly.
Hope that helps somebody with the same issue in the future.

Photoshop CC Not saving properly

Ok, I have tested this with a few different computers that all have the latest update of Photoshop CC and they all do it... When you have a photo open and you go to Save As, if you hit enter (which should save it), the dialog box drops you into a subfolder if you have subfolders, and then hitting enter again saves it in the subfolder, which if you dont catch this, could lead to files being saved where it's not supposed to be saved to. You have to physically click "save". please help fix this bug.

What operating system are you using?
It's not working the way you describe for me on Windows 8.1. When I choose File - Save (or Save As), then just hit Enter, the file saves in the folder that was selected by default.
-Noel

Purchases not saving properly, then being deleted!

Sorry for the long post, but I figured the more info the better...
I am storing my music on an external hard drive. I have my advanced settings set to 'Keep iTunes folder organised" and "To copy files to iTunes music folder when adding to library". When I finish downloading a song, it says it is complete but when I check the 'Info' for the downloaded song it ends up in the downloads folder of itunes as a .tmp file, not in the proper place.
For example, tonight I downloaded Centennial by Tokyo Police Club. It appeared to have downloaded correctly and processed, yet the pathway for the song is as follows:
K:\Music\iTunes\iTunes Music\Downloads\Centennial_Elephant Shell (Bonus T.tmp\download.m4a
According to the way I have iTunes setup it should end up in the folder:
K:\Music\iTunes\iTunes Music\Tokyo Police Club\Elephant Shell (Bonus Track Version)\01....etc
The above folder is actually created on my external hard drive, but it is empty.
In the folder K:\Music\iTunes\iTunes Music\Downloads\Centennial _Elephant Shell (Bonus T.tmp there are two files:
Download m4a which is 4181 kb and Info (a Quick Time preference file) which is 2kb
When I sync my iPhone or iPod, I am able to get the track onto the device, however at some point, the download folder deletes the m4a file and then the link in iTunes shows up as a "!" and the file is no longer anywhere on my hard drive. AS it is an external drive, nothing gets sent to the recycle bin...it just gets permenantly deleted.
I have been able to restore my purchases from my iPhone by transferring back purchased items after deleting the links off of iTunes before syncing my device, but this is a totally inconvenient solution, and it is only a matter of time before I lose purchases.
Also, I am never prompted to backup my purchases like I was in the past and I am running the most updated version of iTunes. Anyone ever seen something like this before???
PS: There is nothing wrong with the hard drive, i've run a diagnostic on it and even switched drives...still the same. Aaaargh!

Perhaps. It seems iTunes can create the new artist folder. Your first post said it shows up, but is blank. But then it can't write the final file to that folder.
Were you trying to take ownership of the root K: drive?
Try taking ownership of K:\Music and all its subfolders, instead - does that work?
This isn't an easy one. You might have to use MSCONFIG to find out why itunes can't finish its filing tasks.
http://support.apple.com/kb/HT1275
edit - do you have V CST from Verizon? There is a memonitor.exe process from Verizon that is known to interfere with itunes saving the final file.
Message was edited by: Katrina S.

Xfce4 sensors settings are not saved properly

Xfce4 settings do not apply after boot, which is to say I have to change the settings every time after a boot. Specifically, I only need to click the 'Show' option for two sensors in the settings dialog.
The xfce4-sensors-plugin-12480173280.rc file seems okay after I've changed the settings.
[General]
Show_Title=false
Show_Labels=false
Use_Bar_UI=1
Show_Colored_Bars=true
Scale=0
Font_Size=small
Font_Size_Numerical=1
Font=Sans 12
Lines_Size=2
Update_Interval=30
Exec_Command=true
Show_Units=true
Small_Spacings=false
Command_Name=xfce4-sensors
Number_Chips=3
Suppress_Hddtemp_Message=false
Preferred_Width=400
Preferred_Height=400
[Chip0]
Name=k8temp-c3
Number=0
[Chip0_Feature0]
Id=0
Address=0
Name=Core0 Temp
Color=#00B000
Show=true
Min=0.00
Max=80.00
[Chip0_Feature1]
Id=1
Address=1
Name=Core1 Temp
Color=#00B000
Show=true
Min=0.00
Max=80.00
[Chip1]
Name=acpitz-0
Number=1
[Chip2]
Name=ACPI
Number=2

Something replaces the above working config file with the default one every time (or almost every time) I boot.. weird

Preferences are not saved properly

A while back, I was doing something "complicated", with several programs open at the same time, and GarageBand crashed. Nothing unusual.
But since then, every time I open GB, two error messages come up: The first one says: "Error reading/writing file "com.apple.garageband.cs":" and lets you click "cancel". The second one says: "The preferences are not loaded completely. Do not save them, as you would overwrite the Preferences file with incomplete data." and lets you click "OK".
Then, when I want to quit GB, it doesn't simply shut down like usual, or that is to say, it shuts down, but then the message that says that the program has unexpectedly quit and do you want to send an error repport comes up. But then GB apparently still hasn't shut down entirely, and I have to force quit it in order to quit it completely. Because, I suppose, the program is trying to save the Preferences file, in vain, because something (but what?) is prohibiting it from doing so.
I don't really know what all this means. As far as I can see I haven't actually lost any work because of this yet (but then I haven't searched that deeply), but I would sure like to make sure that doesn't happen.
Does anybody have any clue what's wrong here and what I can do to fix it?
All the best
Martin
iBook G4 Mac OS X (10.3.9)

Hey Willy,
Sorry, that was the first thing that came to my mind.
Maybe if you restart and login to that account try those settings you want to do and restart again to see if that works ( it's what i do when i use windows ).
Might or might not work. Just a thought.
cheers..

Bayside Beat tutorial not saving properly? [subject edited by moderator]

I'm only on the first step of the trial, and have saved 'Bayside Beat' to the Sites folder, but it's empty - there are no images, nor anything in the js folder - what's happened??

The tutorial says -
Copy the bayside_beat folder into the Sites folder.The bayside_beat folder is the folder you will use as the root folder (main folder) for your Dreamweaver site. The content folder contains two rich text format (.rtf) files with text content for the web pages you'll build in this tutorial. The bayside_beat_comp.jpg image shows the design for the main page of the website (see Figure 2).
Did you add this bayside_beat folder as the root folder of the site in your site definition?

Dynamic forms not saved properly

Hi ,
I have a dynamic forms created using Adobe 8 LC.
After the form is generated thorugh application when I try to save the dynamic pdf using save button in Pdf toolbar, there are null values or extra rows of data being added to the dynamic pdf. The javascript calculations are not being displayed for eg totals .
I am unable to figure what is causing this extra rows to be added in the pdf. When I give a print option to PDF, the dynamic document is printed correctly without any extra rows.
Please help..
Thanks,
Vidya

Hey Guys,
Thanks for the tip Gunter...I tried it and it didn't work.
When I insert, I get redirected to a "page not found", but the record gets inserted into the database.
I'm wondering if it is my Managed Site. I keep fumbling around until I get my site working. Currently I have my Local Info, which is my local folder and local IIS HTTP address. I have my Remote Info which is Local/Network Access and my Remote Folder on the LAN. I'm getting confussed with what my Testing Server should be. I have set my Server Model of PHP MySql and Access of Local/Network and the Tesing Server Folder as the same location as my Local Folder. My URL prefix is the same asa my local IIS HTTP address. Does all this look right?
The PHP version is 5.1.6

Forms not saving properly

I have a couple of forms I've created for a project. The trouble I am having is that the forms allow the user to SAVE 1 time only. After that, they are forced to SAVE AS regardless of how many changes have been made to the form.
Is this a document setting I have messed up somewhere?

Additional info: It seems to only occur when changes have been made to fields which allow for multiple lines of text to be input.

Files not saving properly; File write vi stops program every 10 minutes

Trying to run current scan program; Data won't write automatically to file. I have to enter return at prompt to keep program running!

How are you writing your files? Are you using the Write LVM Express VI or some of the file I/O vis? This information will help alot.
You have to hit return if you have a dialog showing. You can create and write to files with any of the various functions without going through a dialog. Usually this is done by either placing the dialog in a case and only running it on the initial run of your loop, or by placing it outside of your loop so it runs only once before you start looping.
If you are using the Write LVM Express VI, you can set it to only prompt once. Then it remembers the path on subsequent iterations.
But, you need to give a little more information and maybe a sample VI to get a more specific answer.
Hope that this helps,
Bob
Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
DISTek Integration, Inc. - NI Alliance Member
mailto:[email protected]

Not Saving Properly

Similar Messages

Maybe you are looking for