Not saving tabs after reboot

Firefox 3.6 and 5 does not ask to save tabs, or does not open the tabs I had on reboot of computer

I think it was the default with 3.6 to ask you at end of session if you wanted to save tabs, possibly you got your settings changed along the line.
It is not the default to ask you Firefox 5 (and Fx4). What was changed was that you can restore your previous session through the History Menu. The good news is that you can have the old way back to let you know you want the previous session while fresh in your mind. Even better if in the meantime you remember you want the previous session you can get it through History.
see item #31 (#tabslost) in the following
You can make Firefox 4.0.1 look like Firefox 3.6.18, see numbered items 1-10 in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 look like 3.6)]
*http://dmcritchie.mvps.org/firefox/firefox-problems.htm#tabslost
Part of the problem is that the Firefox developers think that most users use the default home page. (do you know anyone who does, I don't) Makes sense for them to follow along with a standard starting point if there may be a problem.
The about:home (default home page) tells you if you have previous session to restore or about history.

Similar Messages

SF300-24 is not saving configuration after reboot

Dear All,
I have a couple of SF300-24 switches. When I made needed configurations using CLI or GUI and then saved all configurations. The problem is that switches do not save configurations after reboot. Please assist.
Thank you in advance

Hi Vsevolod,
I guess you have performed the function to copy the running configuration to the startup configuration as per the screen capture below.
The current released version of code does not have a supported CLI only a menu accessable via console, SSH or telnet. New code coming out this month supports a CLI, so I am surprised by your comments regarding CLI.
If you have a early beta release of software version 1.1 with CLI, I would suggest you call into the Small Business Support Center to get the problem looked at.
I am using the beta code on my ten port SG300 and 48 port SF300 , but had no difficulty saving configurations in old or beta versions of firmware.
If you are still having trouble after reading this post, please contact the SBSC at ;
http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
regards Dave

Not saving settings after reboot.

Everytime I reboot, the language settings are reset ( I had 3 other languages).
Also some of the apps I recently purchased are not remembering login or licence.
Anyone with the solution please?

Originally Posted by devsfan1830
The old workaround we needed when Win 8.0 came out still works. Set up all your settings. Put PC to SLEEP. Wake up, then reboot. From then on your settings should stick and sound remain working between boots. Kinda silly we need to resort to this on what amounts to a service pack, but lets face it. No one else is making audio cards these days so Creative can pretty much afford to not give a crap. Although at this point I wonder if I should just switch to on board sound and be done with all this mess.
This did not work for me. I tried everything to get it to work. I ended up replacing the card with the new ZX and after the sleep trick this card seems to be working.

Iphone 4 front camera not working even after reboot,resets and restore.

i am using iphone 4 .I have problem that front camera is not working even after reboot,resets and restore with itunes.I thing there is a hardware problem.
Now i wont to go apple store for replace the phone because phone is under warranty period.But problem is that i lost the receipt.Will apple store help me without my receipt ?please help me

If setting up as new device without using the latest backup does not bring the camera function back, get it looked at or serviced by Apple:
How to back up your data and set up as a new device
Apple - Support - Service Answer Center

Listener service not start automatically after reboot in Win2K server Clust

Hi all,
I set up a two node Server Cluster with Microsoft Windows 2000 server cluster service. Hardware are two HP DL380 servers and HP MSA500 (the shared storage). The cluster's IP address is 10.1.241.65. When I shut down both servers and restart the primary server, the listener server service will not start automatically. The listener log is:
Started with pid=1108
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=10.1.241.65)(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
32-bit Windows Error: 49: Unknown error
The service is set up automatically start. I suspect the cluster virtual IP is not available immediately after reboot. So I tried setting the Recovery after first failure and second failure to 3 minitues each, and setting up Dependencies of the listener on the cluster service in the Win2K Service panel. Neither worked.
The service can be manually start.
Any suggestion?
Frank.

The command to start automatically the listener is :
lsnrctl start
check the parameters in : <ORACLE_HOME>/network/admin/listener.ora
check the IP address or host name
Joel Pérez

CSS Service not coming up after reboot

I installed oracle 10.2.0.2 (X86_64) on SLES 9 (x86_64) NON_RAC (single instance with ASM) and the CSS service is not coming up after reboot. If i do localconif reset then it starts up but fail after every reboot. Here is the data to debug:
This is the tail of my $ORACLE_HOME/log/servername/alertservername.log
2008-03-06 22:16:32.587
[client(13472)]CRS-1006:The OCR location /u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr is inaccessible. Details in /u01/app/epsora/product/10.2.0/log/pune-srv-eps-02/client/clscfg_13472.log.
2008-03-06 22:16:32.588
[client(13472)]CRS-1006:The OCR location /u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr is inaccessible. Details in /u01/app/epsora/product/10.2.0/log/pune-srv-eps-02/client/clscfg_13472.log.
2008-03-06 22:16:33.217
[client(13472)]CRS-1001:The OCR was formatted using version 2.
2008-03-06 22:17:54.615
[cssd(13670)]CRS-1601:CSSD Reconfiguration complete. Active nodes are pune-srv-eps-02 .
u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr is accessible through oracle user:
$ls -l /u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr
-rw-r--r-- 1 epsora epsdba 364544 2008-03-06 22:16 /u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr
This is the log file mentioned in above file:
Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2005 Oracl
e. All rights reserved.
2008-03-06 22:16:32.579: [ OCROSD][2546869600]utread:3: problem reading buffer
5db000 buflen 512 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.580: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.580: [ OCROSD][2546869600]utread:3: problem reading buffer
5dd000 buflen 4096 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.580: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.580: [ OCRRAW][2546869600]propriogid:1: INVALID FORMAT
2008-03-06 22:16:32.580: [ OCROSD][2546869600]utread:3: problem reading buffer
5dd000 buflen 4096 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.580: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.588: [ OCRRAW][2546869600]ibctx:1:ERROR: INVALID FORMAT
2008-03-06 22:16:32.588: [ OCRRAW][2546869600]proprinit:problem reading the boo
tblock or superbloc 22
2008-03-06 22:16:32.588: [ default][2546869600]a_init:7!: Backend init unsuccess
ful : [22]
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:3: problem reading buffer
5dd000 buflen 512 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:3: problem reading buffer
5dd000 buflen 4096 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.588: [ OCRRAW][2546869600]propriogid:1: INVALID FORMAT
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:3: problem reading buffer
5dd000 buflen 4096 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.588: [ OCRRAW][2546869600]ibctx:1:ERROR: INVALID FORMAT
2008-03-06 22:16:32.588: [ OCRRAW][2546869600]proprinit:problem reading the boo
tblock or superbloc 22
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:3: problem reading buffer
5dd000 buflen 512 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:3: problem reading buffer
5dd000 buflen 4096 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.588: [ OCRRAW][2546869600]propriogid:1: INVALID FORMAT
2008-03-06 22:16:32.676: [ OCRRAW][2546869600]propriowv: Vote information on di
sk 0 [u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr] is adjusted from
[0/0] to [2/2]
2008-03-06 22:16:33.217: [ OCRRAW][2546869600]propriniconfig:No 92 configuratio
n
2008-03-06 22:16:33.217: [ OCRAPI][2546869600]a_init:6a: Backend init successfu
l
This is tail of my ocssd.log
[    CSSD]2008-03-06 22:17:55.955 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a1b10) proc(0x7a4e70) pid(13754) proto(10:2:1:1)
[    CSSD]2008-03-06 22:17:56.455 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a3740) proc(0x7a4e70) pid(13773) proto(10:2:1:1)
[    CSSD]2008-03-06 22:17:56.460 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a5b10) proc(0x7a7f50) pid(13772) proto(10:2:1:1)
[    CSSD]2008-03-06 22:18:08.380 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a9770) proc(0x7a1f50) pid(13839) proto(10:2:1:1)
[    CSSD]2008-03-06 22:18:08.383 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a9770) proc(0x7a1f50) pid(13839) proto(10:2:1:1)
[    CSSD]2008-03-06 22:18:11.556 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7aa3c0) proc(0x7ac7d0) pid(13845) proto(10:2:1:1)
[    CSSD]2008-03-06 22:18:17.873 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7ad070) proc(0x7af480) pid(13828) proto(10:2:1:1)
[    CSSD]2008-03-06 22:44:22.700 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a9850) proc(0x7a1e50) pid(14060) proto(10:2:1:1)
[    CSSD]2008-03-06 22:44:22.703 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a22b0) proc(0x7a9850) pid(14060) proto(10:2:1:1)
[    CSSD]2008-03-06 22:44:25.875 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a32b0) proc(0x7a1800) pid(14077) proto(10:2:1:1)
And this is my css.log
Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2005 Oracl
e. All rights reserved.
2008-03-06 22:17:47.404: [ CSSCLNT][2549892096]clsssInitNative: connect failed,
rc 9
I checked on metalink and found that this error can occur due to some old oracle references or changes in the uid of users but this is fresh install no oracle was there before and we didnt' change the OS user's uid also.
Please let me know what else to check or SR is the only option?
Thanks
Daljit Singh

Do you mean CRS rather than CSS?
I note that your database is patched to 10.2.0.2 but your CRS is still at 10.2.0.1. Bring both to 10.2.0.3 and if that doesn't resolve the issue open an SR at metalink.
Do not install the January CPU ... it appears to have issues with RAC that we are currently investigating.

My iPad is not charging even after rebooting and checking the charger on another device.

My iPad is not charging even after rebooting and checking the charger on another device.

So your charger works on another device just not on your ipad?
if so, make an appointment at your local apple store and have them check it out.

HT1414 my iphone 3g is not turn on after reboot only show me apple logo and then trun of auto . now its not get charging with my comp or adaptor. plz help me

my iphone 3g is not turn on after reboot only show me apple logo and then trun of auto . now its not get charging with my comp or adaptor. plz help me

I had the same problem i had to take to a shop to get a new battery so i did and now it is good so i suggest get a new battery hope this helped

Changes to selected columns to display in Details tab in Task Manager are not saved during a reboot

I use Task Manager on Server 2008 R2 to monitor performance. I have added several columns to the Processes tab using View..Select Columns. I have added CPU time, I/O read/write/other bytes, etc.
The equivalent in Server 2012 is the Details tab. I figured out how to add these same columns - right click on the column headers, and choose "Select columns". This is not obvious by the way.
However these selections are not persistent across a reboot. So every time I reboot, I need to add the columns back to the display. That is not the case with Server 2008 R2 - they are persistent.
I am using a domain administrator userid, but not using roaming profiles.
This is a retrogression vs. Server 2008 R2. Can it be fixed?

Hi,
I meant that both the added columns of Windows Server 2008 R2 and Windows Serve r2012 RC are persistent.
You may install a new Windows Serve r2012 RC to check the symptom.
Currently, you may perform a System File Checker (SFC /Scannow) to check the result.
Regards,
Arthur Li
TechNet Community Support
Arthur, I have the exact same problem as David Trounce. The problem exists, as he described it, and I don't think you are understanding it. Please pass this problem/bug/defect report to someone else so that it can be logged and fixed before
RTM. Thanks! -Kent

Enhancement in IDOC_INPUT_ORDERS not saving changes after order creation

I have an enhancement at the beginning of the IDOC_INPUT_ORDERS function module used to create sales orders via EDI. In the enhancement, I take the data records and make some changes to some quantities and units of measure. After making these changes, I let the function module continue on as normal. The order does get created with my changes in them, however, the IDoc doesn't reflect my changes.
Here's an example: An EDI order comes in with 6 EAs of a material. In my enhancement, I change it from 6 EAs to 2 3PK. I then let it go on its way. The order gets created fine with 2 3PKs, however the IDoc after its a ll done still says 6 EAs.
The enhancement runs before the FM puts the data into the tables it uses. I tried using the last user exit to open the IDoc and editing it there using the EDI_DOCUMENT_OPEN_FOR_EDIT FM but it says its open.
Can anyone give me any clues on how to make my changes stick to the IDoc?
Thanks,
Curtis

Ok, I figured out why it's not saving. Not realizing it, but the tables are passed into the FM by reference, so what I'm changing is only a copy. So what I tried to do is use the 004 (I've also tried the 005) user exits to try to update the actual DB. I used the following FMs (EDI_DOCUMENT_OPEN_FOR_EDIT, EDI_CHANGE_DATA_SEGMENTS, and EDI_DOCUMENT_CLOSE_EDIT). The problem is that I can't change them because the IDoc is still open.
Does anyone have any ideas on how I can achieve my goal of changing the IDoc?
Thanks,
Curtis

How can I keep window tabs after reboot in Mavericks?

Upon each reboot I find I need to reconstruct all Finder window tabs. Is there a way to keep/restore Finder window tabs after a reboot in Mavericks?

hi
the problem is in the firefox tab strip at the bottom of the page. i have attached two screenshots . when i open more than 6 tabs, they all get compressed into 1 tab. i want all tabs to stay open individually, and the tab strip should therefore have a page scroller icon forming when many tabs open. i have had this in the earlier computer i had, but recently got a new one. now i cant figure how to set firefox to do what i need.
thanks

SSRS 2008 R2 Services not restarting automatically after reboot

SSRS 2008 R2 Reporting instance not restarting automatically after patches install. Is there a way to resolve the issue
Windows 2008 R2 Server
16 GB RAM

Hi,
Follow this article to resolve the issue:
Reporting Services service doesn't start after the installation of MS12-070 security patch
http://blogs.msdn.com/b/mariae/archive/2012/11/12/reporting-services-service-doesn-t-start-after-the-installation-of-ms12-070-security-patch.aspx
Workaround 1:
Modify the registry to increase the default time-out value for the service control manager. To increase this value to 60 seconds, follow these steps:
1. Click Start, click Run, type regedit,and then click OK.
2. Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control.
3. In the right pane, locate the ServicesPipeTimeout entry.
Note If the ServicesPipeTimeout entry does not exist, you must créate it. To do this, follow these steps:
a.On the Edit menu, point to New, and then click DWORD Value.
b.Type ServicesPipeTimeout, and then press ENTER.
c.Right-click ServicesPipeTimeout, and then click Modify.
d.Click Decimal, type 60000, and then click OK.
This value represents the time in milliseconds before
Restart the computer for the changes to take effect. Check that SSRS services can be started now.
You cannot start SQL Server Reporting Services after you apply the update that is discussed in KB 2677070
http://support.microsoft.com/kb/2745448/en-us
Thanks.
Tracy Cai
TechNet Community Support

Oracle does not start automaticly after reboot

I've installed O 9i on win2ksrv after installing DB2.
Then I create a database and this db starts successfully.
After reboot the database is shutdown and can only starts manually by sysdba.

Hi,
Have you checked the space of ORAARCH or SAPARCH folder/directory ? The problem may be "Archive destination full". If its full then try to move some old Offline redo log file to other safe location as a backup and then try to restart the Oracle Instance again.
Regards
Bhavik G. Shroff

AirPlay button not appearing even after reboot

I recently updated my iPhone 3Gs 32GB to iOS 4.2.1 and found no AirPlay button. I read a thread about rebooting your iPhone once, but that didn't fix the problem either. Even after rebooting the device, I still can't see any AirPlay button. Any help?

I have the same probelm and even thought the botton on
any suggestions ?

Bookmarks get changed randomly / Bookmarks Bar does not stay showing after reboot

This is a brand new installation of FireFox 17.0.1 download directly from Mozilla. The previous installation was completely removed using Revo in an attempt to find the cause of this problem.
I have my bookmarks saved to a .json file so after full installation of FireFox, I rebooted the computer, came back into FireFox, enabled the Bookmarks Bar and imported my Bookmarks. Looks good so far. Then I shut it down and rebooted the computer. The bookmarks are gone, the FireFox size is back to default, and the Bookmarks bar is no longer showing.
In my previous installation, sometimes the bookmarks were there, sometimes they weren't. But even when they were, the actual URL that the bookmark was supposed to go to had been changed to some site that was opened at some point during the previous session (but not bookmarked).
The same types of problem do not occur in Opera, Safari, Chrome, or IE so I don't believe it is anything interfering with the saving of customizations.
Anyone have any ideas?

Bookmarks shouldn't have been changing by themselves. Your places database (which stores history and bookmarks together) might have been corrupted. Your new installation should not have that problem, at least not right out of the box.
Sometimes Windows permissions, files in use, or other factors can cause Firefox to lose changes or start up incorrectly. This article might help: [[How to fix preferences that won't save]].
Are you just running the standard release of Firefox directly on Windows? In other words, I assume:
* It's not the "Portable" edition of Firefox.
* You are not using sandboxing or virtualization software that isolates Firefox from the system.

Not saving tabs after reboot

Similar Messages

Maybe you are looking for