Not seeing Airport Express after Leopard Upgrade

Just upgraded by macbook to leopard, and now it's not seeing my airport express base station. the card is working fine (sees and connects to other networks) and the base station itself is connected to the internet (iphone can access it). when i turn airport off then on, system preferences will show my network as connected briefly before disconnecting, and after that i can't connect to my network again. airport utility does not see the base station.

Perform a Factory Default Reset on the Express as follows:
Power off the Express
Wait a minute
Hold in the reset button first, and keep holding for an additional 10 seconds while you plug the Express back in to power
Release the reset button after the hold period
Allow a full minute for the Express to restart to a slow, blinking amber light
On the iMac running Leopard.....
Make sure that you have the wireless turned on at the top of the screen so your Mac is connected to the network
Open Macintosh HD > Applications > Utilities > AirPort Utility
When the Express appears in the window, click Continue
Enter a name for the Express and a device password, then click Continue
Select the option to Join your current network, then click Continue
Select the option for the Express to wirelessly join your network and click Continue
Click on the arrow in the drop down box and then select the name of your wireless network, or type in the name of your wireless network
Wireless Security = WPA/WPA2 Personal
Enter your wireless network password and verify, then click Continue
Click Update, then click Continue
Close AirPort Utility and wait a minute for the Express to restart. If your settings are correct, you will see a green light.
The Express is now set up

Similar Messages

ITunes 10 does not see Airport Express because port 3689 is unavailable

I never had problems with iTunes 9 and Airport Express, but since iTunes 10 the following problem occurs regularly: iTunes starts, but does not "see" Airport Express (AE) as an external speaker. Sometimes it also loses connection after Windows hibernate mode, but that might be another issue.
What I found out is that it is NOT a firewall issue, otherwise it would not work once in a while. What I saw, though, is that TCP port 3689 is sometimes stolen by other apps like Mozilla Thunderbird (TB). I.e. if Thunderbird is started BEFORE iTunes, it might use 3689 as a listening socket. iTunes then cannot see AE until I shut down TB and restart iTunes. This is very annoying and I only found out after many weeks when watching TCP live connections in my personal firewall software.
Two questions arise:
1) If listening port 3689 is unavailable, why does iTunes not show any error message? There is absolutely no indication as to why it does not find the external AE loudspeaker. BTW, the AE config programm can connect to the hardware easily.
2) Even if port 3689 is blocked by another application, Airfoil for Windows works flawlessly with my AE. I can even tunnel iTunes through Airfoil and then listen to music in my living room, even though iTunes does not see AE. Why can a 3rd party program do something which iTunes can't?
There must be a way to smarten up iTunes and fix this annoying bug.

Nerd

Airfoil does not see airport express

I am running 10.6.8 and airfoil does not see airport express liek it used to. I am using an older version of airfoil. Any one have any suggestions so I can get my music to work through my home speakers again?
thanks

Having a similar problem. iTunes 6.0.2 "sees" the Airport Express but cannot select the speakers associated with the Airport. iTunes 6.0.1 works on a Mac Mini with the same Express. Tried to re-load the system from the CDs but iTunes 6.0.2 still on

Can't configure Airport Express after firmware upgrade 6.2.

I have an Airport Extreme (V5.6) and I recently upgraded my Aiport Express to firmware 6.2. I was using the Express to extend my range and attach to my stereo for iTunes. I went out of town and took the Airport Express with me to use in my hotel rooms. Everything was fine. When I returned and I re-attached the Airport Express to the system at home, it said there was a firmware upgrade, so I went ahead and did the upgrade. Since that time, iTunes has not been able to recognize the Express. It tries, but cannot find it. I then tried to reconfigure the Aiport Express but i get an error message "An error occurred while attempting to communicate with the AirPort Express. (-8)". Does anybody have a solution. I'm afraid to update the Base Station firmware for fear that I might run into the same problem. I'm running an aluminum Powerbook G4(1.25 ghz).

Hi,
I don't really know the solution, but the Airport Express firmware is now at 6.3. Maybe you should use this latest one to see what's happen...

Airport network form time capsule does not see airport express

Hello,
I'm rather new, bought my first apple few days ago, it's great. Have been throwing away years by using the blue screen machines
I now have mac mini, today i bought time capsule and an airport express.
time capsule to make my network and the airport express to connect my stereo.
Important: I have no internet connection yet, it will be installed in 10 days.
for now i use a mobile phone connection on the mac mini.
I installed time capsule. time machine works and airport is in the air.
With airport utility i can see the time capsule, but nothing else.
it has been there for a short time, but then time capsule was gone.
i can not find the utility to start installing airport express all over. Maybe i gave the wrong WPA2 password with the first install, but can not find the software to try again.
I placed the a.expr within 1 meter of time capsule for this test.
led of time capsule is green, led of a.expr is amber blinking.
I did a reset of the a.express, no response.
I downloaded the latest a.express client, no difference.
airport is still on. it does not see the a.express.
how to proceed?
Is it only possible ONCE to setup a.express the right way? I remember answering questions which i can not find anymore.
Sorry for the long story,
hope you can help,
Rik

oh oh oh oh........ :O
Found it.... before i connected the a.express with time capsule by a wire....does not help!
Solution is to make this wire connection between a.express and mac, then it's possible to reconfigure.
After this wire everything worked in 5 minutes.
Anyway.... thanks for reading...
Rik

Verizon FIOS Network does not see Airport Express

I recently upgraded to Verizon FIOs and they replaced my Airport Extreme Base Station an Actiontek wireless router. The new Router does not see my 2 Airport express wireless stations that I use for ITunes broadcasting. I tried a hard reset of the basestations with no luck.
I also tried to connect the old Airport Express into the ActionTek. It sees the Express stations but will not connect to the internet (Although I set up for a DHCP connection, it dtill serches for a PPPoE host)
The Verizon FIOs tech support is of no help.
Please help!!!!!!!

You will need to reconfigure your 2 AirPort Express (AX) to join the wireless network provided by the ActionTek.
OR... If you want to replace the ActionTek with your AX, it appears that you will need to ask Verizon to change to the Ethernet MAC address from the MAC address of the ActionTek. Several people have reported that this is necessary.

Worse signal with Airport Graphite after Leopard upgrade

I just upgraded my MacBook Pro to Leopard. Since then, I havent been able to get a full signal with my Airport Graphite. I've read the posts here about Leopard and Airport graphite's inability to be detected by the airport utility program. The same thing has happened to me. I tried resetting my airport base station but even that i couldnt do. Please help

that does make sense, that it could be the old ones.
BUT - people are having tons of wireless problems with NEW airport extremes,
airport express, and other manufacturer's wireless routers, too. There are numerous posts on the forums about all kinds of wireless issues with Leopard.
http://www.pcworld.com/article/id,139140/article.html

ITunes does not see airport express speakers but airfoil does

iTunes 6.0.2 and AE 6.3
iTunes does not see the AE speakers but Airfoil does.
Have restarted AE to no avail.

Having a similar problem. iTunes 6.0.2 "sees" the Airport Express but cannot select the speakers associated with the Airport. iTunes 6.0.1 works on a Mac Mini with the same Express. Tried to re-load the system from the CDs but iTunes 6.0.2 still on

I can't see airport express after iTunes re-install

Hey you Windows guys, my daughter uninstalled iTunes by accident. When I reinstalled it, I can't see the Airport Express (AE) any more. It also doesn't show up in the Airport Utility. This is what I've done to troubleshoot and more info:
Windows 7 - 64 bit
Latest iTunes and utility install.
Status light is green on the AE.
I can access the AE from the utility software if I manually enter the IP address.
My firewall is enabled for private and public on the follow services (iTunes, Airport Utility, Bonjour)
All ports have access in firewall
I can see the AE if I turn off the firewall
So based on the last point, I'm assuming it's a firewall issue but I'm at a loss for any of trouble shooting options.
Any help would

OK, just some further basics, I've also tried all the resets (Soft, Hard, Factory) on the AE and still not showing up.
Any ideas out there?

New Time Capsule does not see Airport express

Hi
We purchased A new Time Capsule but are not able to get the existing Airport Expresses to work with it. I tried looking for the AE with AIrport Utility and cant see them.
Any idea how to get these to work with our new Time Capsule 3 TB? My Airpot Utility is Version 6.2
Thanks
Jenny

I've reset one of them. no luck
Suggest that you try the following if you have not already done so.
Power down the AirPort Express (AX) for a few moments
Hold in the reset button and keep holding it in for 10-12 seconds while you plug the AX back in to power
Release the reset button and allow 40-45 seconds for the AX to restart to a slow, blinking amber light
Move the AX near your Time Capsule and computer
Temporarily, connect a spare Ethernet cable from your computer to the AX
Open AirPort Utility to configure the AX
If you do not have a spare Ethernet cable handy, the AX is broadcasting a wireless signal with a name like Apple Network xxxxxx. You must first connect to this network from your computer.
Then, open AirPort Utility. You may be asked to "switch" networks so that AirPort Utility can connect
If you use the recommended Ethernet cable method, you can disconnect the Ethernet cable once the AX has been Updated. Then, move the AX to the desired location.
Configure the second AX like you did the first.
If you have the older "b/g" version of the Express devices, unfortunately you will need to configure the Time Capsule and Express devices to Participate in a WDS network if you need to enable the Ethernet ports on the AX devices.
This will result in the Time Capsule being changed to a "g" wireless router, since WDS will only operate at "g" wireless speeds.

Windows xp does not see airport express

I run an airport express as a base station in my apartment which works fine both for my iMac and my Palm pda. But a friend is visiting me presently, and her windows laptop, running XP, does not see my wifi station, although it sees others in the area. I tried removing security but that made no difference.
Is there perhaps was something that had to be ticked in the airport base station setup to enable Windows laptops to see Apple wifi? As for example when I send attachments in Apple Mail I have to tick a box to make them Windows-friendly.

I use Airport Express... two Macs and another laptop running Win XP and couldn't get the Win to see the network until I changed to a different card, a D-Link Airplus. I think it was all of $19.95 and works like a charm...
Also, in Airport Admin Utility/Network, make sure you have:
Distribute IP addresses checked and where it says; Share a single IP address using DHCP and NAT, click the pop up menu and select: Use 10.0.1.1 addressing.
Also, her Win might be picking up interference your iMac or Palm doesn't... try a different channel:
By default, the AirPort software automatically selects the best available channel when the base station is plugged in. If your base station is experiencing interference, try changing the channel it uses.
To select a different channel:
Open AirPort Admin Utility, located in Applications/Utilities.
Select your base station and click Configure.
Enter the base station password if necessary.
Click AirPort, and then choose a new channel from the Channel pop-up menu.
Carolyn
Message was edited by: Carolyn Samit

Can't communicate with Airport Express after WIN upgrade?

I upgraded to Windows7-64 from XP and my itunes will not communicate with my airport express. I get a green light on the unit and on AP Utility. Back on iTunes, on the multiple speaker drop down list, the name of my APEx device is displayed with a checkmark but there is a lock symbol over an exclamation mark in a triangle.. Please help.
Ron

Hello Anderron,
I'd suggest taking a look through the following article for a host of useful troubleshooting steps that can help get AirPlay working.
iTunes: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS5209
Cheers,
Allen

Airport Utility not seeing Airport Express base station

Since I got access to cable internet a few days ago, I've been using my Airport Express base station with no problems on my MacBook. Today I tried to set up my roommate's PC (she has Vista, if that matters) so she can get online. So we downloaded the AE Utility for Windows, then reset both the modem and the AE base about two times, but her computer won't see the Express base at all when it scans.
Any ideas? Do we need to go into her Network preferences on the Control Panel or something? I've been through the manual but it wasn't much help. Sorry this is such a basic question, thanks for all helpful suggestions!

You had everything working properly.
There was no need for her to have Airport Utility on her computer as the Airport Base station was already set up.
Set your system up the way it was and then on her computer, just have her join the network.
Do not use Airport Utility for anything on her computer.

Airport Utility scans but does not see Airport Express

Hi,
When I open Airport Utility it scans looking for devices and finds none. Meanwhile. the yellow light is blinking on AE.
We had Verizon over a week ago to change and set up a new wifi router, as the old one stopped working. The network name didn't change. Access to the web is fine, so there's nothing wrong with Airport. I can't figure it out.
Thanks,
Raphael

rshammaa wrote:
When I open Airport Utility it scans looking for devices and finds none.
Try connecting your Mac to the AirPort Express with an Ethernet cable to see if that allows AirPort Utility to see it.

My pc does not see airport express?

When setting up my airport express I have a flashing amber light and error message that says utility was unable to find wireless device.

You need the Windows version of Airport Utility to configure an Airport Express. And you need to enable wireless on the computer unless you are connecting the AEX directly to your modem via Ethernet cable.
Did you read through manual that came with the AEX?

Not seeing Airport Express after Leopard Upgrade

Similar Messages

Maybe you are looking for