Not seeing all photos in Project

I have one project that shows all photos contained in the albums below it, but another project does not. How can I fix this?

I have a similar problem where I have several projects that the photos are not shown. If I show project info it shows the number of photos that should be there; however I can not see any in the project?
I can find the photos in finder in the location I told Aperture to store the files.
The project was in tack and viewable when the photo's were imported, and at some point they are missing?
It is not a filter or tag, I have been through that route, and this set to "all photos".
I have approximately 35,000 photos that are in about 40-50 projects.
I am currently disappointed in the performance of the file system of Aperture, and the fact that I have been plagued with crashes and lost files.
Any help appreciated,
Robert

Similar Messages

  • Iphoto on MacbookPro not seeing ALL photos on Iphone5S

    My Macbook Pro is not seeing all my photos on my I phone 5S so it is not importing all photos.  how do i get the MacBook Pro (through I photo) to see all the photos on the I phone?
    Thanks

    Trouble With Syncing Mac Photo Stream to iPhone

  • I do not see all photos exist inside a shared photo stream using iPhoto on Mac

    There is a shared photo stream among 5 different users with 125 photos and videos inside. For my account I use 3 different devices to access this photo stream, an iMac, an iPad and an iPhone. All 125 photos appear ok on my iPad and my iPhone. However when I access this stream from iPhoto on my iMac I only see 69 of them. None of the photos I have shared using my accound are there plus some other photos and videos shared by other users. Other users can see all 125 photos in their mobile devices. What is wrong with iPhoto on my iMac?
    Thanks in advance,

    OSX version 10.8.5
    iPhoto version: 9.4.3
    With these versions you cannot see the contents posted on IOS 7.0.4 devices by the persons invited to the stream. You will only be able to see the photos streamed by the owner.
    If you want to see the photos added by the subscribers to the stream, you need to upgrade to Mavericks and iPhoto 9.5.1. Mt. Lion does not support the new shared photo streams of IOS 7.0.4 fully.
    Regards
    Léonie

  • Not seeing all photos in iPhoto, but all appear in Aperture

    I just updated to Mountain Lion and updated iPhoto and Aperture.  I noticed, and had a slight heart attack, that only 5000 of my 51000 photos were shown in iPhoto!  I then opened Aperture and happily see all 51000 photos.  I am using the same iPhoto libray and not sure if there is some setting that I am missing on iPhoto that is hiding a majotity of my pictures.  I need to have both applications access the same library, I use Aperuture and my Wife uses iPhoto.  Any sugesstions on what I may have done wrong?

    Are you using Stacking in Aperture?

  • IMovie not seeing all photos

    Hello all. I am new to the Apple forum and i'm hoping to find help with iMovies. Would anyone know why iMovies wont see all the photos on my iPhone? I have 4 folders with different photos and every time I click on a folder it shows the same pictures all the time. This only happens in iMovies. Thank you for your help

    Dave Sawyer wrote:
    I'm confused. You refer to "iMovie" which is a movie editing application that is only available for Mac OS X, but your profile says that you have Windows 7. Could you please explain more clearly what it is you have and what you're trying to accomplish? Otherwise it's going to be difficult for anyone to offer much in the way of useful advice.
    Regards.
    your wrong apple released a version for iPhone last year along with the iPhone 4 I think it can only be used on the iPhone 4 and its 4.99 in the application store..

  • Aperture library to lightroom plugin not transfering all photos or projects.

    I am trying to use the recent aperture import plug in added to LR5.  Many of my projects and photos are failing transfer stating "(Possible reasons include asset offline or unsupported asset type.)" I cannot find the difference of the failed jpegs, NEFs, from the others which tranfered.  Any help, suggestions??

    No, no, no.  Can't believe they still don't understand the plugin after all this time.  Adobe support is abysmal.  And you pay a subscription fee!
    The plug-in is a great alternative, but it does have issues.  And the most important steps for migration need to be done in Aperture, which may explain their skills gap.
    See this post for a partial explanation.
    How did your migration to Adobe Lightroom go?
    The key to NOT running out of disk space is to relocate your images from "managed" status to "referenced".  You can specify a better folder structure for your resulting Lightroom library.  Be aware that you will need some overhead, as your Aperture library (metadata) takes space, as your Lightroom catalog will, too.  But migrating "managed" Aperture images results in a full copy.
    There's other considerations for Aperture previews.  Although much smaller, all previews "should" be copied.  I've actually found that the plugin fails to copy a majority of previews.
    Lightroom will copy managed raw files, but will just point to referenced raw files.  If you choose to copy previews, it will copy all previews.  Not much to the plugin, but it helps to know to pre-tag images in Aperture, and make sure you do some sort of file-level compare to make sure everything is copied over.  I've made several posts on these issues under "Photo Enthusiast" in this forum.
    https://forums.adobe.com/community/lightroom/content

  • Not seeing all photos in library

    I have iphoto 11 on a new macbookpro mid2012. In the setup procedure I transferred my old photo library to my macbook pro.
    There are photos in my library ( looking in MASTERS directory in the finder) that do not show in the iphoto application. They do show in Events or  Photos.
    If I rebuild using the Rebuild Photo Library procedure, will I recover the the photos so that I will be able to see them in iphoto.
    thanks

    Then...
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • ITunes does not see all photos

    I have found several posts related to this and none have helped. I have an iPad 2 and a windows 7 PC and while I can see the folders I have selected in iTunes the count of photos in those folders is incorrect. I have tried about everything I could find here. All the photos are .jpg and have that extension. I tried the delete photo cache trick, I have removed and resynced the photos. iTunes seems to sync what it sees but as an example in one folder iTunes says there are 28 photos when there are actualy 44, all the same format, most from the same camera. I have several other floders that sync and almost all of them have an incorrect photo count on the iTunes interface. Another odity is that when I check the include vidios box iTunes tells me there are 7 more items in that same folder but there is only one video in that folder so I sure don't know what it is looking at. This all seem rediculiously complicated. Any suggestions?

    I had the problem...firgured my issue out. When I looked at the differences it appears as though itunes wants to know what type of file you have. In other words you need to have the extension. I looked at my photos and the photos itunes saw all had the .jpg or .tif. I exported the files I wanted on the phone, since renaming them didn't change the file name, looked in the finder to make sure that the .jpg was on the file and reimported and boom sync'd perf.
    good luck
    shaun
    Message was edited by: Shaun Kennedy1

  • HT4236 not see all photos of ipad  in windows explorer

    I connect ipad to pc (windows 7 professional).   On pc, under windows explorer, I can see my ipad.  And expand my ipad, there is a folder Internal Storage/DCIM/X123...  There are some pictures in there.  On my ipad, I have 146 pics, but there was only 96 pics show up on my pc.   Does anyone know why?
    Thanks

    you can only access camera roll

  • Can not sync all photos in Aperture into Iphone 5

    I can not sync all photos in Aperture into Iphone 5. It always can sync some photos into 5. Then finish and prompts: "itunes can not synchronize (other)thousands of projects, and see more information in itunes".  That means most of my photos can not seen on Iphone 5, it seems just can't import to 5. Is that the problem of Iphone or the pictures in Aperture, or even just because lack of sufficient space?

    Solved here...
    Photos app not syncing with iTunes

  • Can not see all the clips in large Icon view in my bin

    I arranged my clips in a bin in large Icon view but i can not see all the clips in the bin while in that mode. I see the clips when in list mode or when i drag them out of the bin into the main bin. As soon I drag them back in large icon view bin they do not show up, when going back in list view they are there.
    Any idea
    Also my daughter accidently pulled the electrical plug, which turned my external hard drive off. So the media was off line. I hit reconnect the clip but the clip does not show as connected in the bin it keeps the Media offline icon but putting the clip in the viewer or time line it plays it. So the clip is reconnected
    hope anybody can help with those two issues thanks

    Nick
    thanks for your message it helped to show the clips. Here how I solved it. I put the clips i could not see in large Icon view, to the Project folder. Even in the project folder I was only seeing the clips with Thumbnail in list view. When i hit large Icon view the clips disappeared, and they could not have been lower down as i only have about 5 folders in the project. I then clicked arrange the clip by name and they showed up again. Like that i dragged the clip back in to its bin and it showed up. The reason for going back and forth I arranged the clips manually in the bin before and when hitting arrange by name it spread them to far apart and put the clips not in a sequence I liked.
    for the second part I followed Neil's suggestion it worked.

  • I subscribed to a photo stream in iPhoto but I'm not seeing any photos

    I'm using iPhoto 9.6 on a Macbook using Yosemite.  Someone shared a photostream with me.  I subscribed (using Yosemite) without any errors but I'm not seeing any photos.  I've confirmed with the person who created the photostream that there are photos in it (I've seen them first hand).  I've had this issue before on Mavericks so .  Anyone seen this before?  Any idea how to solve?

    Not occurring for me, but you could try this:
    This solved my question by adamnash on Oct 19, 2014 6:52 PM
    Solution:
    I took a brute force approach:
    - I quit iPhoto
    - I launched Settings, went to iCloud, turned off Photo
    - I launched iPhoto
    - I verified that iCloud was off
    - I quit iPhoto
    - I went back to Settings, went to iCloud, turned on Photo
    - I launched iPhoto
    It's now synching all the albums, although the one I published while in this broken case seems to have now disappeared.

  • How can I see all photo miniatures when I open a photo album or an event in iphoto?

    How can I see all photo miniatures when I open a photo album or an event in iphoto?

    Note the zoom slider at the bottom of th iPhoto Window - drag it left.

  • TS3989 PhotoStream not downloading all photos

    Hi, my iPad2 (iOS 5.1), located in China, is not downloading all photos on PhotoStream. I have about 430 photos but the iPad2 can only download about 200 then it stopped. The following factors are for your consideration:
    1. The iPad2 in question is not low on battery (more than 80%), and is connected to Wifi. The problem has persisted for days now. I know there're 430 photos on the PhotoStream because on my iPad1 and iPhone 4S I can see 430 photos.
    2. The iPad2 can successfully upload to PhotoStream photos taken from its camera. In fact, photos taken from its camera would even be downloaded as new photos in PhotoStream, yet still not all photos already on PhotoStream (uploaded by other devices) could be downloaded.
    3. I have several other devices participating on PhotoStream with the same Apple ID - iPad1 (iOS 5.01), iPhone 4s (iOS 5.01) and PC (iCloudWindows version 1.1). In fact, the bulk of the photos on PhotoStream now are uploaded from the PC via the iCloud service for Windows. The iPad2 is the only one having trouble downloading all of the photos.
    4. I have reset PhotoStream on the iPad2 once already. 10 days ago the PhotoStream download was stuck for 163 photos (over 400 total) for a couple days. So I've reset the PhotoStream and re-enabled. The download started again, but has stopped for a few days now at 220 photos.
    5. Just one more background - the iPad2 as I mentioned is located in China. I bought one for my parents so we could use PhotoStream to share photos cross border easily.
    Please help!!!

    Nothing... I am waiting on a solution too.  I have the no "My Photo Stream" so no download location.

  • Why does iphoto not copy all photos when transfering

    Hi peeps.
    why does iPhoto not copy all photos from an event when im copy/pasting to an external folder on my mac(for later transfer). All softwares are up to date and ive only just realised it happens, but when i copy all pics in an event then paste in a folder, the pic count is substantially different. for example i select all pictures in an event called 'new1', the count of files is 188. i then copy/ paste to a folder,  select all files and check 'info' and it says 141 files??? 
    all i can see painstakingly going through to compare which images are in each place is that the ones that arent in my new folder , seem to be the ones ive edited in iPhoto??  conincidence? or am I missing something fundamental here?  Ive only just realised this is occuring. The trouble is, after moving images to folders/hard drives I  subsequently delete them from iphoto to keep my macbook airs HDD with some space.  So basically all of the versions of pictures I want, i.e, the new edited and adjusted versions are no longer! NOT HANDY!
      help please.

    We've seen a few reports of this in the past while and no one is sure of the cause.
    Use the File -> Export command. See this User Tip
    https://discussions.apple.com/docs/DOC-4921
    for details of the options the Export Dialogue offers.
    If you're interested in your Photos then this workflow
    The trouble is, after moving images to folders/hard drives I  subsequently delete them from iphoto to keep my macbook airs HDD with some space.
    means you are losing quality, metadata and the version of control. If you don't want these why use iPhoto at all?
    You could just move the whole Library to an external:
    Make sure the drive is formatted Mac OS Extended (Journaled)
    1. Quit iPhoto
    2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    Regards
    TD

Maybe you are looking for