Not seeing all sent mails..?
Hey people,
When I send a mail from my iPhone I can't see the sent messages.
I can only see the ones sent from my desktop app (thunderbird) and/or online. I host my email addresses on site5 on my own domains.
Anyone can help? I tried going into mail settings then attaching sent from server to sent from phone and such but it doesn't change anything... Can't seem to figure how I can see sent from iphone too!
Any update on this? I'm in the same situation. Just an fyi - this is via webmail. There is no filters, forwarding or blocked emails in place via the settings either.
Similar Messages
-
Sent mails staying in sending and not going to sent mails
Hi everybody,
I have the following problem: Sent mails are staying in sending with 100% sent (showing activity, command+0) and not going to sent mails when they are actually sent and arrived to the recipient.
What can I do? Maybe reinstall it? Is there any other solution that might work?
Thanks, enjoy your day,
CédricHello again,
In the screenshot you emailed me, there are files leftover from when this mailbox was used in Jaguar (10.2) or earlier, and also files leftover from when it was used in Panther (10.3.x) and Mail 1.3.x. Specifically all files except the folder Messages (and its contents) are no longer used by Mail -- you can check by using Get Info in them and you will see the dates last modified to all be prior to your upgrade to Tiger. How long ago did you upgrade? Did you find that all mailboxes appeared to have the messages in them that you knew were previously there (at the time of upgrade)? If so, quit Mail and in the Finder remove all files in the Sent Messages.mbox folder except the Messages folder. Then relaunch Mail and immediately use Rebuild.
However, if your Inbox and other mailbox have similar leftover files there might be some impact from that. Check the other mailboxes and let us know. See:
http://docs.info.apple.com/article.html?artnum=301315
If other xxxx.mbox folders have the Info.plist file, then leave it, and do not delete. If you upgraded recently, and you think messages that you saw immediately after upgrade were not all-inclusive, then post back. However, with this Sent Messages.mbox folder the Messages folder size exceeds the size of the mbox file (where message content was once stored) so it gives the appearance of a good, full, conversion.
If you remove the Leftover files from other mailboxes, I would suggest using Rebuild on each of them, although if they seem fine, otherwise it may not be needed. There is another procedure to force reindexing of all mailboxes (Rebuild freshens the Envelope Index with respect to only the one mailbox) if needed.
Ernie -
I upgraded to Yosemite and cannot see my sent mail?
I recently upgraded to Yosemite, I cannot see my sent messages now? I know they are being sent however they are not in my sent mail now? How can I now view these sent messages?
Back up all data. Rebuild the mailbox.
-
I can't see my sent mail in Mail 6.1 using Exchange Server
In the past two weeks I've lost all sent mail in my Mail app (I'm on Exchange.) The mail is apparently still on the server because I can see it on my iPad and iPhone, but not on my MacBook Pro. "Store sent messages on the server" is checked and "Delete sent messages" is set to "Never" in my preferences and I'm on Mountain Lion and have installed all updates. Would appreciate any guidance. Also, all messages in Trash are showing just fine.
BradBack up all data. Rebuild the mailbox.
-
I have an Imac and an Ipad WIFI and use a Time machine base station WIFI. I also have two email accounts, both on the same ISP. The Imac is not turned on most of the time and I use the Ipad for most of my daily computing. The problem is the Ipad is not getting all my mail messages from the server. Whenever I start up my IMAC, I get more messages that the Ipad received. I have done a full reset on the Ipad, but as yet can't fix the problem.
Any ideas??Very long shot - which might have something to do with it. The downloads are set to 25, and I don't refresh the load button. However, that is only part of the answer I think. This morning, I sent out two email messages to a group, of which I am on the list, and one my Ipad I received only one. Alos, one of the things that happens is that my wife is the other account. And we belong to a community which has a server which bounces email to all members of the community, when we send the server an email. Quite ofen, one of us will get the mail, but not the other, and it is not consistent as to who gets the email.
Fun isn't it??? -
I just upgraded to 10.9. My exchange email won't load emails that are older than a few weeks old. How do I change this setting so I can see all my mail?
Plett81,
I'm having the exact same problem. It does not seem to be a settings issue but rather some sort of "problem" with mac mail. My Exchange provider was able to setup my mailbox on a test machine running Mavericks and everything pulled in fine, however I cannot duplicate on my upgraded system.
I was able to get rebuild my mailbox and get the older messages within my Exchange inbox, however none of my folders and old messages outside of the Inbox are downloading/synching.
**NOTE** I contacted Apple SUpport and they told me to call my email provider. I called my email provider which did as described above and they don't see a problem. SO as suspected it has something to do with the Mavericks update but I'm not sure Apple is willing to help. I might try contacting them one more time and see. -
Mail not downloading all e-mails from hotmail
Hi,
I have a MacBook pro 15inch running latest updates on OSx lion. I am having a real problem with mail application and my hotmail account. I have setup the hotmail account in mail and it downloads any new mails I receive but it does not sync any of the sent mails.
I also have an iPad which I use to send and receive emails and every time I reply someone using the iPad, there is no record of it on my mac if I replied to that person or not. Whereas if I reply to anyone using the mac, iPad shows all sent mails in sent folder.
Another problem I had (which is not currently main issue) is that occasionally it asked to put your password in for iCloud and hotmail account even if i check save to keychain.
Is there any way I can get my mac to sync all folders from my hotmail to mac? iPad does it with no problem..
Thanks in advance:)I'm having the same issue and have tried deleting the account and adding again but I only have emails that came in yesterday after Mavericks installed. My thousands of emails from the server did not load. They are everywhere else but on the updated Mavericks computer.
-
Changing mail server settings (per Verizon's request) caused all sent mail to disappear
Changing incoming mail server per Verizon's 3/7 email caused sent mail folders on iPad and iPhone to go empty. I was able to restore them by restoring my devices from iTunes backups. All sent mail was then restored (even mail sent after the backup date.) If I change the outgoing server, the sent mail files are not affected. Changing the incoming server (from incoming.verizon.net to pop.verizon.net) wipes out the sent mail. Since it is POP/SMTP, there are no other settings I can change on the Apple side. It appears Verizon needs to figure out how to link the old sent mail to the new server ID... Anybody know anything about this?? Thanx.
Hmeek wrote:
iPhone does not have many settings for POP email clients, which is what Verizon is. The options to set delete behavior and file locations exists only for IMAP mail, and Verizon is POP, not IMAP. And changing the incoming server settings DID cause my sent mail to disappear. It was reproduceable. As said before, it came back when I restored from backup -- even a backup that pre dated many of the sent messages, so they obviously didn't restore from the backup itself. (And Apple confirms that mail is not backed up in an itunes backup). Verizon keeps claiming that sent mails are not stored on their system, but where did they come from when they re-populated?
From your restore most likely. Its true that smtp email does not get saved on the Verizon (or most other) mail savers. -
Can not see all the clips in large Icon view in my bin
I arranged my clips in a bin in large Icon view but i can not see all the clips in the bin while in that mode. I see the clips when in list mode or when i drag them out of the bin into the main bin. As soon I drag them back in large icon view bin they do not show up, when going back in list view they are there.
Any idea
Also my daughter accidently pulled the electrical plug, which turned my external hard drive off. So the media was off line. I hit reconnect the clip but the clip does not show as connected in the bin it keeps the Media offline icon but putting the clip in the viewer or time line it plays it. So the clip is reconnected
hope anybody can help with those two issues thanksNick
thanks for your message it helped to show the clips. Here how I solved it. I put the clips i could not see in large Icon view, to the Project folder. Even in the project folder I was only seeing the clips with Thumbnail in list view. When i hit large Icon view the clips disappeared, and they could not have been lower down as i only have about 5 folders in the project. I then clicked arrange the clip by name and they showed up again. Like that i dragged the clip back in to its bin and it showed up. The reason for going back and forth I arranged the clips manually in the bin before and when hitting arrange by name it spread them to far apart and put the clips not in a sequence I liked.
for the second part I followed Neil's suggestion it worked. -
I can not see all "Divisions" in BP Rel.--Partner Function Assignment
Hi,
When I edit "Partner Function Assignment" in BP reliationship such like BUR011("Employee Responsible"),
I can not see all "Divisions" in list which I can see in configuration via SPRO-->Customer Relationship Management->Master Data->Orgnizational Management->Division Setting->Define Divisions.
E.g., in configuration, I can see 7 records of divisions from "001" to "007", but in "Partner Function Assignment" of BP relationship, I can only see "002" to "004".
Do you know why? Thanks a lot!
Best regards,
Longhi
that should not be happening,if they are visible in one client then should be there in another too
do one things try run this
hrbc1_atributes_buffer_update
it will refresh the buffers of your org structure and then you may be able to add this
also check the check box where it is mentioned that"object determination should be permitted"
remember it will run only for once after you run this the check box will be unchecked again
i guess it may solve your probs
also try to structure your org structure index
use t code
crmd_index_om
and withtin the object type give O
and execute
best regards
ashish -
Can not See All of my Music Library on the play list
I accidently moved my music library (My documents/My music/my itunes...)
When I moved it back, iTunes does not see all the song (over 2000). It only see the purchased music. I can use the Add to Library function (In the File menu) and add each song, song by song and I have added a few dozen songs back to the play list. So all the music is there, in the directory, Just can not get iTunes to recogize them.
ANY suggestions to adding the whole library back at once.
Thanks
Dell 4400 Windows XPDo you at least have the little ! (exclamation point) next to the "missing" songs?
I just had the same thing happen to me, but mine occurred simply by upgrading to the latest version of iTunes... in the process it "lost" about half of my music.
I simply unchecked "Keep iTunes Music folder organized" under prefrences/advanced tab.. hit "OK", then went back in and re-checked it, hit OK and iTunes began "organizing" my library and miraculously iTunes found all of the missing music.
There are some decent articles about moving your iTunes library on the support site. They don't always work as advertised, but you're pretty much stuck with My Documents/My Music/iTunes on Windows.
You may be able to reverse things by following those instructions as well. -
I can NOT see all my songs on iPhone5 since activating iTunes Match about a week ago!
ALL songs are available on my iPad3
ALL songs are available on my Win7 computer iTunes
I just did:
Transfer purchases from iPhone and a Music Sync
NOTHING. Tunes and artists are still NOT SHOWING on my iPhone5\
BUYING another copy makes it available on te iPhone, but at double the price
However, some show as PURCHASED, so I can't get another copy on the iPhone
There are MAJOR PROBLEMS with iTUNES MATCH!
This problems is ONLY on the iPhone 5It might take a while (30 minutes or more) for the initial sync to finish.
When it finishes, here's how to see all you desktop bookmarks:
# Press the "Search" button on your Android phone, or tap in the Firefox address bar.
# Press the "Bookmarks" button (with a star icon).
# Tap the "Desktop Bookmarks" folder. -
My iTunes 11.0 (mac) has a black background colour and I can not see all of the information for each song. How do I change the background colour in iTunes 11.0 (mac) so I can see check boxes etc. My download window shows no information, it is entirely black.
Trent o
Someone else in the forum told me how to do this. If you have Onyx on your system then select Parameters, iTunes and turn off high contrast mode. If you don't have Onyx, I'd suggest getting it. It is freeware and used to help maintain your system. Good luck
Paul -
I have paid for an iPad magazine subscription, but I can not see all the pages of the first issue I just got. All I'm getting is the free preview. I contacted the magazine publisher, IPC, who said to contact Itunes, where I do not see an answer.
You can contact iTunes Store Support here.
https://getsupport.apple.com/Issues.action
Click on Purchases, billing and redemption to get started. Are you sure that you actually downloaded the magazine? I have a subscription to one magazine and I choose to download the magazines on my own rather than automatically. -
Hello i needed to install an extension for dreamweaver and for some reason extension manager does not see all my adobe programs. How can i fix that without reinstalling the programs?
Here are my Bridgetalk Diagnostics if it helps:
Result: BridgeTalk Diagnostics
Info:
Name = estoolkit-3.8
Status = PUMPING
Group = cs
Path = /Applications/Utilities/Adobe Utilities-CS6.localized/ExtendScript Toolkit CS6/ExtendScript Toolkit.app
Version = 2.0
Build = ES 4.2.12
Next serial number = 40
Logging: = OFF
Now = 12:58:04
Messages:
Message Version = 2.05
Authentication = ON
Digest = ON
Thread: estoolkit-3.8#thread
Avg. pump interval = 76ms
Last pump = 69ms ago
Ping: 7
ECHO_REQUEST: ECHO_RESPONSE
Timeout = undefined
Handler = undefined
STATUS: PUMPING
Timeout = undefined
Handler = undefined
MAIN: MAIN
Timeout = undefined
Handler = installed
LAUNCHED: LAUNCHED
Timeout = undefined
Handler = installed
DIAGNOSTICS: DIAGNOSTICS
Timeout = undefined
Handler = installed
INFO: INFO
Timeout = undefined
Handler = installed
SETUPTIME: thread=1ms, left=29ms
Timeout = undefined
Handler = undefined
Instances: 3
estoolkit-3.8#dbg:
msg[12:58:04]: 00000035
@BT>Version = 2.05
Target = estoolkit-3.8#dbg
Sender = estoolkit-3.8#dbg
Sender-ID = localhost:mac3334
Timeout = 12:58:05
Type = Ignore
Response-Request = Timeout
Headers = (no headers)
Timestamp = 12:58:04
Serial-Number = 35
Received = undefined
Result = undefined
Error = undefined
Body = (empty)
Incoming: 1
Outgoing: 0
Handler: 9
ExtendScript = for all messages
Error = for only msg #25
Error = for only msg #27
Error = for only msg #31
Result = for only msg #35
Error = for only msg #35
Timeout = for only msg #35
Result = for only msg #37
Error = for only msg #37
estoolkit-3.8#estk:
msg[12:58:04]: 00000037
@BT>Version = 2.05
Target = estoolkit-3.8#estk
Sender = estoolkit-3.8#dbg
Sender-ID = localhost:mac3334
Timeout = 13:08:04
Type = Debug
Response-Request = Result Error
Headers = (no headers)
Timestamp = 12:58:04
Serial-Number = 37
Received = undefined
Result = undefined
Error = undefined
Body: 107 bytes
Text = <get-properties engine="main" object="$.global" exclude="undefined,builtin,prototype" all="true" max="20"/>
Incoming: 1
Outgoing: 0
Handler: 1
ExtendScript = for all messages
estoolkit-3.8: (main)
Incoming: 0
Outgoing: 0
Handler: 1
ExtendScript = for all messages
Targets: 7
Connector = PCD
Installed: 0
Running: 0
fireworks-12.0:
Group = cs
Path = /Applications/Adobe Fireworks CS6/Adobe Fireworks CS6.app
Display Name = Adobe Fireworks CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = OFF
BundleID = com.adobe.Fireworks
Status = (not running)
ExeName = Adobe Fireworks CS6.app
aftereffects-11.0:
Group = cs
Path = /Applications/Adobe After Effects CS6/Adobe After Effects CS6.app
Display Name = Adobe After Effects CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = ON
BundleID = com.adobe.AfterEffects
Status = (not running)
ExeName = Adobe After Effects CS6.app
audition-5.0:
Group = cs
Path = /Applications/Adobe Audition CS6/Adobe Audition CS6.app
Display Name = Adobe Audition CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = ON
BundleID = com.adobe.Audition.5.0
Status = (not running)
ExeName = Adobe Audition CS6.app
bridge-5.064:
Group = cs
Path = /Applications/Adobe Bridge CS6/Adobe Bridge CS6.app
Display Name = Bridge CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = ON
BundleID = com.adobe.bridge5
Status = (not running)
ExeName = Adobe Bridge CS6.app
estoolkit-3.8: PUMPING
Group = cs
Path = /Applications/Utilities/Adobe Utilities-CS6.localized/ExtendScript Toolkit CS6/ExtendScript Toolkit.app
Display Name = ExtendScript Toolkit CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = ON
Status = PUMPING
Info:
Group = cs
Version = 2.0
Build = ES 4.2.12
Next serial number = 47
Logging: = OFF
Now = 12:58:04
Messages:
Message Version = 2.05
Authentication = ON
Digest = ON
Thread: estoolkit-3.8#thread
Avg. pump interval = 76ms
Last pump = 270ms ago
Ping: 7
ECHO_REQUEST: ECHO_RESPONSE
Timeout = undefined
Handler = undefined
STATUS: PUMPING
Timeout = undefined
Handler = undefined
MAIN: MAIN
Timeout = undefined
Handler = installed
LAUNCHED: LAUNCHED
Timeout = undefined
Handler = installed
DIAGNOSTICS: DIAGNOSTICS
Timeout = undefined
Handler = installed
INFO: INFO
Timeout = undefined
Handler = installed
SETUPTIME: thread=1ms, left=29ms
Timeout = undefined
Handler = undefined
ExeName = ExtendScript Toolkit.app
exman-6.0:
Group = cs
Path = /Applications/Adobe Extension Manager CS6/Adobe Extension Manager CS6.app
Display Name = Adobe Extension Manager CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = OFF
BundleID = com.adobe.exman
Status = (not running)
ExeName = Adobe Extension Manager CS6.app
switchboard-2.0:
Group = cs
Path = /Library/Application Support/Adobe/SwitchBoard/SwitchBoard.app
Display Name = SwitchBoard 2.0
MsgAuthentication = ON
MsgDigest = ON
ESTK = OFF
Status = (not running)
ExeName = SwitchBoard.app
Installed: 6
Running: 1
Groups: 119
cs3:
acrobat-8.0
aftereffects-8.0
soundbooth-1.0
bridge-2.0
contribute-4.5
devicecentral-1.0
dreamweaver-9.0
encore-3.0
estoolkit-2.0
fireworks-9.0
flash-9.0
illustrator-13.0
indesign-5.0
indesignserver-5.0
incopy-5.0
photoshop-10.0
premiere-3.0
stockphotos-1.5
audition-3.0
cs4:
acrobat-9.0
aftereffects-9.0
soundbooth-2.0
bridge-3.0
contribute-5.0
devicecentral-2.0
dreamweaver-10.0
encore-4.0
estoolkit-3.0
fireworks-10.0
flash-10.0
illustrator-14.0
indesign-6.0
indesignserver-6.0
incopy-6.0
photoshop-11.*
premierepro-4.0
audition-4.0
ame-1.0
exman-2.0
cs5:
acrobat-9.0
aftereffects-10.0
soundbooth-3.0
bridge-4.0
contribute-6.0
devicecentral-3.0
dreamweaver-11.0
encore-5.0
estoolkit-3.5
fireworks-11.0
flash-11.0
illustrator-15.0
indesign-7.0
indesignserver-7.0
incopy-7.0
photoshop-12.*
premierepro-5.0
audition-5.0
ame-2.0
exman-3.0
flashbuilder-4.0
flashcatalyst-1.0
ts1:
captivate3-en_us
captivate3-fr_fr
captivate3-it_it
captivate3-ja_jp
captivate3-es_es
captivate3-de_de
ts2:
captivate-4.0
el2:
captivate-5.0
as1:
acrobat-10.0
ts3:
robohelp-9.0
framemaker-10.0
cs55:
aftereffects-10.5
audition-4.0
bridge-4.1
contribute-6.1
devicecentral-3.5
dreamweaver-11.5
encore-5.1
estoolkit-3.6
fireworks-11.1
flash-11.5
illustrator-15.1
indesign-7.5
indesignserver-7.5
incopy-7.5
photoshop-55.*
premierepro-5.5
ame-2.5
exman-5.5
flashbuilder-4.5
flashcatalyst-1.5
switchboard-2.0
el25:
captivate-5.5
cs60:
aftereffects-11.0
audition-5.0
bridge-5.*
contribute-6.88
devicecentral-4.0
dreamweaver-12.0
encore-6.0
estoolkit-3.8
fireworks-12.0
flash-12.0
illustrator-16.*
indesign-8.0
indesignserver-8.0
incopy-8.0
photoshop-60.*
premierepro-6.0
ame-6.0
exman-6.0
flashbuilder-4.52
switchboard-2.0
prelude-1.0
speedgrade-6.0
el60:
captivate-60.*
ts4:
robohelp-10.0
framemaker-11.0Same issue. Doesn't see Dreamweaver.
Maybe you are looking for
-
Dear all, where can we set link between asset in one PO to line item of the same PO.At present we have link between asset and PO. so in one zreport we are getting multiple records for the same asset.means that asset is coming in all lines items of P
-
Modification of BP in ERP.
We have both a CRM and ERP system that uses Middleware for replication of BP data from CRM to ERP. However, on the ERP side I would like to modify the org.data for the BP after replication (on the ERP side). Is there a BAPI or FM that I can use to re
-
IPhone always logs me out of youtube
Hi there, my iPhone always logs me out of youtube. I can log in but when getting back to the app another day it did not keep the credentials. I always have to log in again. Do you have any idea what the issue is? Cheers, Kai
-
How do I remove Avast from Safari?
-
Bridge does not show VC status in Thumbnail
Hi, since migrating to a new laptop, Bridge CS3 does not show the VersionCue status icons under the thumbnail, only in the inspector panel. I cannot find any hint in the docs how to get the status icons shown again. Any ideas? Cheers Thomas