Not seeing HOST in compre configuration under deployments tab.
Hi
I am unable to see some preticular host under
DEPLOYMENTS
COMPARE CONFIGURATIONS
Any inputs what changes bring that host visable in this section. I want to check differences between Dev and Prod.
Thanks,
RK
Hello sburech
Check out the article below to troubleshoot issues with syncing over Wi-Fi with iTunes. Start with restarting iTunes as well as resetting your network at home.
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi syncing
http://support.apple.com/kb/TS4062
Regards,
-Norm G.
Similar Messages
-
i do not see the Rescue email link under the security questions to reset the questions and answer ?
You need to contact Apple, either through the link in that article or by phoning them and asking for the Account Security team.
(82021) -
Can not see the report in report manager/admin tab
Hi,
in 8.49 on Win 2003 some users can not see the reports in report manager/admin tab. PS user can see them.
Should we add some grants in user profile ? Which ? Any query to compare that user profile with PS ?
Thank you.On the administration page, you will be able to see "View Reports For" header on the top.
Under that header you will see the following fields:
User ID/Type/Last/Status/Folder /Instance
Above values will be used by PeopleSoft to filter and display the list of reports
If the user has selected Status as Processing and saved the page, PeopleSoft will only show reports which are in Processing status.
If user runs a report and it has been posted, it will not show up in report manager coz the filter value is set to Processing.
Hope this helps. I dont think Permissions has anything to do with this since user is able to view the page. -
Iam not able to view preview data under preview tab in BI 7
Dear One's
Can any one kindly reason out the occurance of my problem ?
Iam not able to view preview data under preview tab in BI 7 even the file format is CSV and no. of rows to be ignored is 1 and data separator is "," & escape sign is ";"
The error was some thing like " infoobject MAT_IDMAT_NAME_MAT_TYPE is not corelated"
Though I was given seperated the columns like MAT_ID & MAT_NAME & MAT_TYPE
Thanks in advance,
RajHi Raj,
If it is CSV, you can make corections data source itself.Once you check the fields entered in the data source with your csv file, because there may be some mismatching between the file you loaded and data source.Enter thre fields in data source as per your file.And check the line to be displayed option, when you clicking on preview.
If you still getting problem, let me know. -
2 Mac can not see each other via airdrop under the same airport/timecapsule.
I have 2 iMac in my home with a TImeCapsule (gen4).
The wifi is on both 2.4G and 5G with the same SSID.
iMac A is working on 2.4GHz, iMac B is working on 5GHz.
So they can not see each other via airdrop, meanwhile they can see each other in the left panel of Finder.app
Is it a known issue of AirDrop?Hi Kirby Zhou,
Welcome to the Apple Support Communities!
It sounds like you would like to utilize file sharing between computers, not necessarily AirDrop. Please refer to the attached article for information on the file sharing process. If this is not what you are looking for, please let me know.
Share your files with other Mac users - Mac Help
Best regards,
Joe -
HT204074 I'm not seeing the manage devices option under my account information.
I only have the Apple ID summary, iTunes in the Cloud, Purchase History, Settings...what am I missing???
I am trying to remove an iPad from my account.
Thanks!Thank you for the screen shot! Manage Devices is not showing up under iTunes in the Cloud.
Do I need an iCloud account, or an iTunes in the Cloud account, to see my devices?
The devices are showing up under my Preferences...
Thank you for helping me with this! -
Not seeing hosts or services in Bonjour
Bonjour "just works," except when it doesn't. When I started to wonder why I could only intermittently see my wife's MacBook in iChat and never via the Finder, I started looking for Bonjour problems on both computers. I couldn't find any, but eventually tracked the problem down with the help of this discussion thread:
http://www.macosxhints.com/article.php?story=20070427133511931
The culprit was my Linksys WRT54GX2 wireless router. Multicast pass-through was disabled by default, and many Bonjour services (notably iTunes LAN sharing) apparently depend on it. The link above says to look under the Security menu, which may be true for some Linksys models. On mine, it was under the Administration menu and the Management sub-menu.
Posting this here in the hopes of saving someone else my hassles. Cheers!I don't have an Express, but you might take a look with Airport admin Utility as to what's in there!
I kinda doubt Apple would have it disabled by default, but...
Have you created a Computer to Computer Network on both yet?
http://www.apple.com/support/panther/network/
http://www.coolosxapps.net/2007/04/27/an-easy-computer-to-computer-network-on-a- mac-2/
Turned on File or Web Sharing yet? -
I am trying to update to IOS5 but my IPad is not giving me the option to update. How can I get the update?
The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972 -
I've seen an answer to the question of resetting the security questions is by logging into the account and click on security tab and there you should be able to reset the questions, but I don't see this option.what else can I do to reset my questions?
See Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...
Or Email Here > Apple Support iTunes Store Contact -
I am trying to upgrade SW to iSO 5 on my iPad but do not see the software upgrade option under the setting/general tab. Please help.
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom -
Not seeing Spring context in jdev
I am not seeing the Spring Bean configuration in JDEV, even though I did help->check for updates ->Spring and oracle weblogic sca version 11.1.1.3...
I don't have any comments around this. This is what I have:
<componentType resourceBundle="oracle.tip.tools.ide.spring.sca.SpringStringResourceBundle">
<name>${SPRING_COMPONENT_NAME_L}</name>
<folderName>${SPRING_COMPONENT_FOLDER_NAME_L}</folderName>
<implementationType>spring</implementationType>
<implementationFileExt>.xml</implementationFileExt>
<implementationClass>oracle.tip.tools.ide.spring.sca.SCAComponentSpring</implementationClass>
<listenToNodeClass>oracle.jdeveloper.spring.SpringBeansXmlSourceNode</listenToNodeClass>
<description>${SPRING_COMPONENT_DESC}</description>
<tooltip>${SPRING_COMPONENT_DESC}</tooltip>
<icon16x16>/oracle/tip/tools/ide/spring/sca/images/springcomponent.png</icon16x16>
<icon20x20>/oracle/tip/tools/ide/spring/sca/images/springcomponenticon_dia.png</icon20x20>
<topSectionIcon>/oracle/tip/tools/ide/spring/sca/images/springTop.png</topSectionIcon>
<middleSectionIcon>/oracle/tip/tools/ide/spring/sca/images/springMiddle.png</middleSectionIcon>
<middleSectionShortIcon>/oracle/tip/tools/ide/spring/sca/images/springMiddleShort.png</middleSectionShortIcon>
<bottomSectionIcon>/oracle/tip/tools/ide/spring/sca/images/springBottom.png</bottomSectionIcon>
<lightBackgroundColor>231,231,234</lightBackgroundColor>
<darkBackgroundColor>192,194,203</darkBackgroundColor>
</componentType> -
I do not view NPD BU under Category Tab in Activity search page
Hi there,
I'm using Agile PLM 6.1.1.0_Release_12
I'm not able to view NPD BU under Category Tab in Activity search page.
1) I created 2 NPD BU
- Italy
- International
2) I created some Activity template with Italy and International as BU.
The issue is that when I search Activity Template by Category system does not display any results.
Moreover I'm not able to add an activity template in a project template.
Could you kindly explain me why? I hope my question is clear.
Thank you very much.
Best regards,
StefanoI tried this on my local 6.1.1 build and it appears to work. Go ahead and submit an SR so support can investigate.
-
VMware 5.0 host not seeing EMC VNX5300 through UCS
I cannot seem to get VMware ESX 5.0 host to see EMC VNX5300 through UCS FC setup. It does see the EMC storage through iSCSI.
This is our setup
2 - WS-C3750X-24T-E
2 - UCS 6248 UP
2 - Cisco UCS Chassis
2 - EMC VNX5300 FC - Connects directly to Fabric Interconnect and configured as FC Storage Port
2 - EMC VNX5300 iSCSI - Connects directly to Fabric Interconnect and configured as NAS Port
When I do 'show flogi database' on the Fabric Interconnect, I see
INTERACE
VSAN
FCID
PORT NAME
NODE NAME
fc1/31
2231
0x970001
50:06:01:62:46:e0:13:42
50:06:01:60:c6:e0:13:42
fc1/32
2231
0x970101
50:06:01:6b:46:e0:13:42
50:06:01:60:c6:e0:13:42
vfc689
2231
0xea0002
20:00:00:25:b5:00:00:5f
20:00:00:25:b5:00:00:4f
vfc1133
2231
0xea0000
20:00:00:25:b5:00:00:2f
20:00:00:25:b5:00:00:7f
According to this, I seems to see the initators on the EMC. Why is it not seeing the EMC storage group?
Is there a documentation on how to hooking this up correctly?
JimmyHi Jimmy,
If you are using UCS version 2.1, it could be that you missed to do the zoning in UCS for the FC direct attached storage. Please enable zoning in the required VSAN and follow steps in
http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/gui/config/guide/2.1/b_UCSM_GUI_Configuration_Guide_2_1_chapter_011011.html to configure the zoning.
If your UCS version is prior to 2.1, you need to have a upstream SAN switch which is connected to FI and pushing the zone database to the FI.
Hope this helps.
-Ganesh -
Pre 2010 Macs not seeing netboot images hosted on 10.6.7 server
I'm having an interesting issue where any pre-2010 Mac will not see available images hosted on OS 10.6.7 Server. Anything later than mid-2010 has no issues and sees all of the available boot images when option booting. Does anyone have any insight as to why this might be happening. I'm still searching but not having any luck.
Just a shot in the dark but is it possible you have enabled some kind of filtering under Netboot/Settings/Filters? My box to enable is unchecked.
Thanks -
not able to see ikm oracle incremental update and ikm oracle slowly changing dimensions under PHYSCIAL tab in odi 12c
But i'm able to see other IKM's please help me, how can i see themNope, It has not been altered.
COMPONENT NAME: LKM Oracle to Oracle (datapump)
COMPONENT VERSION: 11.1.2.3
AUTHOR: Oracle
COMPATIBILITY: ODI 11.1.2 and above
Description:
- Loading Knowledge Module
- Loads data from an Oracle Server to an Oracle Server using external tables in the datapump format.
- This module is recommended when developing interfaces between two Oracle servers when DBLINK is not an option.
- An External table definition is created on the source and target servers.
- When using this module on a journalized source table, the Journaling table is first updated to flag the records consumed and then cleaned from these records at the end of the interface.
Maybe you are looking for
-
The Microsoft Access database engine cannot open or write to the file in Report Builder 3.0
I am trying to build a report in Report Builder 3.0. I created the Data Source to point to my Excel file and the Data Set. I drag a couple of fields on to the canvas and then choose Run. I get the error: "The Microsoft Access database engine cann
-
DBA COCKPIT error when scheduling a job
hi experts Iam trying to schedule some jobs in DB13 when i try to add the action i get this error: DBA Cockpit Error Acces to system SID failed Function Unit DB6_PLAN_DD_BATCH Reason job error iam able to run these jobs externally directly from DBM.
-
Hi All, The customer hasn't run 'Program- Create Journals' since last 4 months to created encumbrance journals. The periods are closed now. I have run the program-create journals now but I cannot post them until I open the last 4 months periods. We h
-
it is restoring now hopefully it works
-
Directory Spacer/Divider which is OS independant
In LabVIEW I have a File Path Control selecting a directory I want to use. To this directory name then I want to add the name of a file, which is always going to be the same. However, I want to be able to use the LabVIEW VI on both Linux & Windows OS