Not seeing increase in speed with dual GTX880m (16GB in SLi)- Premier CS6 or CC

-I've enabled the "hack" so CUDA is recognized in Premier CS6 and CC but I don't see any difference in speed between software and CUDA.
Machine: OEN17-SLI
i7 4810mq 2.8ghz
32gb Hyperx 1600
Dual GTX880m in Sli
512gb SSD in raid0
thoughts on this?

In a laptop I am wondering if they really can support two PCIe X16 lanes. I would suggest that you download GPU-Z and look at this
This when the GPU is working hard this is what you should see, when not working it throttles back to "@x16 2.0" or to @x16 1.1" . But at least it is running with x16 lanes of the PCIe bus. In desktop systems when you install two GPU's it is not uncommon to see one or both fall back to x8. GPU-Z can run multiple instances so you can have two of these screens running and set one to each GPU. If this shows a throttling problem I doubt that there is any way around it.
Next lesson for the day is to then look at the Sensors TAB on the top of each and this is what you will see:
Notice the GPU Load item where we have 99% usage. So for this case my GTX 765M is being fully utilized.
If you also notice in both screens I have overclocked the GPU memory by 50% and achieved much better results but the GPU temperature is a very safe 56°C. In laptops they of course stress battery life, they achieve this ultra conservative operation by severe performance reduction.

Similar Messages

Can not see the option Execution with Data Change in the infoprovider?

Hi team,
i am using query designer 3.x, when i go into my bex brodcaster settings and schedule my report
i can not see the option "Execution with Data Change in the infoprovider",
i can only see 2 options
Direct scheduling in background process
create new scheduling
periodic,
is there any setting which i would be able to see the option "Execution with Data Change in the infoprovider"?
kindly assist

Hi Blusky ,
check the below given link.
http://help.sap.com/saphelp_nw04/Helpdata/EN/ec/0d0e405c538f5ce10000000a155106/frameset.htm
Regards,
Rohit Garg

No increase in speed with parallel processing on quad-core

I'm using the NI Vision vi "IMAQ correct calibrated image" on quite a large image. This takes about 0,09 seconds to complete, and only uses 1 core of my computer. (25% cpu time) I always need to correct two images, so I made two parallel execution lines, expecting that I would get 50% cpu usage (i.e. two cpu's used), and still 0,09 seconds to complete.
However, it takes 0,18 seconds to complete, with 25% cpu usage. It seems the code is not executing in parallel...
I checked the Vision vi, and it's simply a wrapper to a DLL call. I think I remember hearing once that dll calls are single-threaded... Is that the reason why I don't see any increase in speed? Is there a way around this?
Thanks in advance.

This is no good news then.
But maybe you can introduce parallelism on your own?
Depending on the algorithm, you are using, you CAN split up the image on your own and make calls on the algorithm for each fraction and then put the (altered) fractions together to a new image again. I have not tried something like this, so in the worst case, it does even slow things down.
Nevertheless, if the image is large enough (so "split up" and "merging" overhead is negligible) AND the DLL itself can be called parallel (not sure if this works), you could possibly see some performance increase...
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

NX7600GT Diamond Plus and fan speed with Dual Core Center

I just got a NX 7600GT Diamond Plus for my HTPC. I noted that Riva Tuner and other utilities are not able to control the fan speed of the video card. The only way one can control the fan speed is via Dual Core Center and 3D Core Cell. The problem is that the default setting for fan speed on Dual Core Center is too high and clearly audible. How can I get Dual Core Center to start with user defined presets during windows start-up/boot-up ?
What I want to do is to put the fan into 'SILENT' mode automatically during Dual Core Center start-up. Any ideas / suggestions ?

Quote from: BOSSKILLER on 17-January-07, 00:44:11
well no need to edit manually, MSI provided everythink in easy way from core center.
select advanced mode, create your custom profile pickup your desired settings,(setup maximum FAN RPM via buttons) and save it to custom profile.
suggest you to read help section from program.
So the custom profile is automatically loaded every time DualCoreCenter starts up ? Maybe there is something wrong with my install of DCC, I cannot get it to load custom profiles automatically upon startup. I can save the changes to say "User Profile 1" but the profile active on startup always is the "default" profile ...

How can you increase the speed with a slider

I have been trying to work at this for about a week and a
half. I browsed several communities but it seems that noone has an
answer so I am not even sure if this is possible I am not a flash
expert but what I am trying to do is as follows;
I have a movie with several movie clips. I have an animation
of a female walking, I also have a slider that when I move it to
the right bags are added on to her. but what I am also trying to
accomplish is to have her walk faster as the slider moves to the
right.
I tried several scripts but they seem not to work as I wan
them to plus they start to cancel out the bag function.
How could I make this happen if it is even possible. I want
to use the slider to increase the speed of the lady walking. Slider
and Lady are movie clips.
thanks in advance

At present I'm not aware of any way to achieve this exact effect in Muse (where the first screen of a web page is resized to fill the browser window and the rest of the page, as you scroll down, appears to be fixed height layout).

I could not see photos after updated with ios 6(used wi-fi)

I have upgraded with ios 6 on 21-Sep-2012, after that I could not see my photos on my phone 4.
I used apple id for icould buy not able to verify.
thanks,
umapathi

Same issue. But my iPhone 4 does it as well. Only thing is with my iPhone it maintains a persistent 3G connection so at least I'm getting my messages as they arrive. But if I relied solely on WiFi and my device was in sleep mode, I wouldn't get any notifications.
On my iPad 2 I've tried forgetting the network, renew lease, rebooted, airplane mode etc. Nothing works.
It's not crippling my device but it's really annoying and it's not the way it should behave.

I just downloaded ITunes 11.1.1.11, and do not see function to sync with my IPhone 4 v6.* Where is the feature hiding in ITunes update?

As stated in the title, I installed ITunes 11.1.1.11 yesterday.
I endeavored to synk my Iphone 4 today to update calendars and addressbook, but did not see in ITunes any function to accomplish this, as it did not initiate automatically, as in the old system.
I decline to upgrade to the IOS 7 at this time, and regret at the moment upgrading to Itunes 11......
Does anyone have a clue how to engage the Iphone sync feature in Itunes 11...., as I am disinclined to pay the turds at Apple 19.95 for a consultation that should not be necessary.
Thanks for your assistance.

Does the device show up in iTunes? If not see TS1538: iOS: Device not recognized in iTunes for Windows.
tt2

I am using AOL and my refresh is on the far left I do not see a small circle with a line through it

Sagebrush - I am using AOL and my refresh is on the far left side of my adress box and I do not have a small circle with a line through it. I am computer dumb so bear with me.please.
Message was edited by: Nana Noland
Mike - I am using Windows 7 and I think my browser is Internet Explorer and I always use AOL to sign in.
Thank you for any help you can give.
Message was edited by: Nana Noland

While AOL uses IE as it's browser engine, it's and older version of IE (IE8) that DOESN'T have ActiveX filtering. Only IE10 and IE11 have the filtering.
BTW: If you have AOL software installed, (unless you're on a dialup connection and you NEED it to connect), you're basically taking up nearly a gigabyte of hard drive space for software that DOES NOTHING that the AOL website can't already do with Internet Explorer, or another browser. I was a "Windows/Mac connectivity specialist" for AOL in 2002 & 2003, and their software is what we geeks call "bloatware", meaning it's FILLED with all kinds of stuff that you'll never possibly use. My advice would be uninstall it altogether. Download Firefox. It's a much better browser than AOL or Internet Explorer. Download and install the Flash Player Plug-in (All other browsers) and the Shockwave FULL Installer (All Other Browsers)
For ALL your AOL content, use your Member name and password to login at http://www.aol.com/ where you'll find your AOL Mail, AOL Headlines, your AIM Buddy List, and EVERYTHING that was part of the AOL software, only it's ALL on AOL's servers, not your hard drive.

Why do I not see the background image with html5 boilerplate

hello,
I downloaded the html5 boilerplate
And in the main.css I made this :
body {
    font: 16px/26px Helvetica, Helvetica Neue, Arial;
    background-image: url(../img/background.jpg)
and also in the normalize.css I set this :
body {
    margin: 0;
    background-image: url(../img/background.jpg)
But in IE10 I still do not see the background image.
Can anyone tell me what I did wrong ?
Roelof

Hello
You need to run your VI once. Wire the Select Signals express VI to your DAQ Assistant and run the VI once (this allows the signal names to propegate).
Check this forum:
select signals
Regards

My Iphone 5 has gone blank, I can not see anything. Restore with itunes has not worked either. Can someone please help?

Hi I recently upgraed to iOS 6.1 on my Iphone 5. After the upgrade, it was all good. Over the weekend I went Austria for Ski. While taking the photos, I simply locked the phone and kept it my pocket as I had to go. After sometime when I opened my phone, I could hardly see anything. I tried to unlock with pin and tried restarting with great difficulty. But nothing worked. Coming back home today, I have tried restore the software and still no luck. I have tried restore almost 5 to 6 times, but the screen is still blank. I dont know if what state it is in and I can not do anything to fix it. I am very annoyed with the support service as they can not be reached on Sunday evening.
I could manage to book a call tomorrow but I have lot of work over next few days at work. Can someone please help how to fix this issue now? Any suggestions will be much apperciated.
Thanks,
Srini

srinifromlondon wrote:
... Any suggestions will be much apperciated...
Try this Discussion
https://discussions.apple.com/message/19521062

Mail suddenly not seeing accounts - acting erratically with new ones

When I turned on my Mac and launched Mail, I was prompted with a "Welcome to Mail" screen which would not let me proceed until I setup a new email account.
I have been using 3 accounts on this machine since I got it early this year. They were IMAP accounts, and they were all gone.
So I added one of them back, and then there appeared to be an indexing problem - when I would click on any message after X date in the message list, the wrong message would appear in the preview pane.
After looking online, I moved the Envelope Index to the desktop, which triggered a re-import of the messages. Now the indexing works, but...
At this point, I am not receiving new messages, even when I hit "Get Mail." I know the messages are there, as I see them on my iPhone and they forward to a web mail account.
Any ideas on how to rectify this? I feel like I'm using Windows!

I did some more research and found that it simply won't download any mails beyond UID UID259987-1153548583. So I edited "MessageUidsAlreadyDownloaded2" to tell it that it hasn't downloaded that UID yet, and then told it to check mail again.
The activity window then suddenly sees that it needs to download over 3000 new e-mails... however, it downloads only one e-mail (the one with the UID I mentioned) and then suddenly stops, without downloading the remaining mails.
So I went into Telnet and deleted the e-mail with that UID, and tried again. Nothing happened. I edited "MessageUidsAlreadyDownloaded2" again and now it only downloads mails up to one UID lower than the one I mentioned (UID259986-1153548583).
I deleted a bunch of other messages after the "stuck message" via Telnet too, but no luck so far. So right now there's a gap, like this:
3857 UID259985-1153548583
3858 UID259986-1153548583
3859 UID259994-1153548583
3860 UID259995-1153548583
And Mail.app plain simply refuses to download 3859 and anything beyond that UID.
I'm troubled because this happens with two separate Mail.apps, and I have absolutely no idea how to fix it or what even causes this!

Is there a way to increase the speed with which Acrobat X Standard opens a form?

I have several PDFs stored on my computer. If Acrobat is not open on my system, the first form that I open takes forever to load. It opens; however, I cannot access the text/check boxes for sometimes upwards of 30 to 45 seconds. This is extremely frustrating. Is there something that I am doing wrong or something that I can reset to prevent this from happening? Once the first form of the day is open, the subsequent forms don't seem to suffer this problem. I am working on Windows 7 Pro.

Hey guys, Gt this problem nailed. There is an add-on called "yet Another Smooth Scrolling" which is terrific and even works with keyboard up/down keys as well. Take a peek at it and this should resolve your problem.
So far I have been using Google Chrome and recently moved to FireFox for its better stability. The things that I found lacking are
1) "Web Applications" like in chrome "Web Store",
2) Google Instant search through its address bar.
3) Quick Start-up.
Otherwise, I love Fire Fox and I hope people help survive this open community.
Thanks.
P.S: I use Firefox 7 (A Beta version). Let me know if anybody has questions.

Why can I not see images on craigslist with fire fox? They appear fine with other browsers.

When viewing listings with images on craigslist the images will not appear in the window while using Firefox. This only happens with Firefox. When using Internet Explorer or Opera when I click on the exact same ads the images appear. No, ... I am not running all three browsers at once.

There is a forum specifically for Boot Camp, you can get there by clicking Boot Camp, I'd recommend reposting there.

HT4539 I just downloaded the newest version of Itunes and had to deauthorize all of my computers. I do not see a store menu with drop down, I am stuck and can't see where the authorization is on this software. It is not in my account and there is no sto

I just downloaded the newest version of Itunes, I deauthorized all of my computers and now can't find the menu to authorize. It refers to a store menu that doesn't exist on the new software. My account allowed me to deauthorize, but has no option to authorize. I am completely confused with the new software, I just want to download my music to my new computer.

With iTunes 11 on PCs the drop-down menus are hidden by default - control-B should get the menus to show
This screenshot is from a Mac, but it should be similar on a PC :

DNG 7.4.137 will not see my NEF files!!!!

I just upgraded to Camera Raw and DNG converter 7.4.    I also just started with a new computer with Windows 7 Pro.
My version of the DNG is 7.4.0.137
My camera is a Nikon D90
Using Photoshop and Bridge CS6
Computer is Windows 7 Pro
When I open the DNG converter, it asks where the images are to be converted.   When I Select   the directory the NEF files are in , it says no files match my search.   This is with the camera memory card in a card reader. I also get this if I copy the NEF files from the camera card directly to a directory on the hard drive.
If I open Bridge CS6 and go to Get Images from Camera,   it will see the memory card in the card reader and see the files, and they can be converted.   BUT if I copy to the hard drive, there is no way I can find them and convert the NEF files to DNG!!!!! That sucks!!! and if I do convert them to DNG in Bridge from the memory card, when I open in Photoshop, I see they are camera raw 7.1.   I thought I had installed 7.4?????

And if you don't want to convert all, consider a batch file, like:
"C:\Program Files (x86)\Adobe\Adobe DNG Converter" -cr7.1 -dng1.3 -p0 %*
You can drop raw files onto such a batch file to convert them.
PS - As far as DNG contents are concerned, there is no difference between ACR7.1 & ACR7.4 (i.e. having the latest acr version only matters when there was a DNG-affecting change in that version).
Note: I recommend use DNG version 1.3 if you don't need DNG v1.4 (e.g. for lossy compression, or fast-load data) - why? for maximum compatibility with other apps that are not yet up to speed with 1.4 (e.g. exiftool, although Phil believes next release 9.25 will provide full support).
R

Not seeing increase in speed with dual GTX880m (16GB in SLi)- Premier CS6 or CC

Similar Messages

Maybe you are looking for