Not seeing my metadata changes from Light Room 3 in PSE 8

PSE 8 is on my Mac.
LR 3 is on my PC.
I make changes to my image in LR 3 then choose "Save Metadata to File", then move the JPG to my Mac.
Go into PSE 8 and Browse using Bridge. Bridge *does* show my changes. If I open in RAW editor, changes there, too.
But if I open the file in PSE 8, no changes are there.
I would much appreciate it if someone could help me out. I cannot find anything via numerous google searches.
thanks,
billy

Thank you for replying and offering to help. It is much appreciated. Let me clarify...
3. It is a JPG file.
1&2... I made several changes to my file (crop, tones, lighting, etc.) while in LR. Then, in LR, I chose "Save Metadata to File". When I open the file in PSE 8, I do not see any of the LR changes that I made. Instead I see the *original* file, with none of the changes that I made in LR.
However, when I use Bridge to browse the file, the thumbnail does, indeed, show the changes that I made in LR. I can tell because of the crop and drastic color/tone changes I made.
Moreover, if I open in the RAW editor from Bridge, the RAW editor also displays all the changes I made in LR.
Only when I open it in PSE do I *not* see the changes that were made in LR, even though the metadata is obviously saved to the file given the two points above with Bridge and RAW editor.
does this clarify? Thanks again for offering to help.
Billy

Similar Messages

Does anyone know why when printing from light room to pdf the program just closes on me? I've talked to tech support and they are going to get back to me tomorrow but I am desperate I have tuns of homework to finish !!

Does anyone know why when printing from light room to pdf the program just closes on me? I've talked to tech support and they are going to get back to me tomorrow but I am desperate I have tuns of homework to finish !!

No, but if you really mean that the way you said it, I don't know that Print is the best way to this. If you haven't already, after selecting the images you want to get printed, try clicking the Export button in Book or Library module and then selecting format .PDF. Once you export the file to .PDF, try opening it where you saved it and printing from there, not in Lightroom but in Adobe Reader. If that doesn't help, here are a couple of videos that might--follow their instructions carefully with no shortcuts:
Adobe Photoshop Lightroom 4's Export to PDF Using the New Book Module - YouTube
Lightroom 5 - Exporting Images | Getting Started with Adobe Photoshop Lightroom 5 | Adobe TV
If Lightroom keeps closing even when you try all this, you may need to reinstall Lightroom because your copy may be screwed up.

I do not see the verification code from apple

i do not see the verification code from apple when i go to my email.

Check Junk and Spam mail folder.

Iphoto not "seeing" most recent photos from my camera

When I connect my camera to iphoto, it does not see the most recent 27 pictures. They are visible on my camera, but when prompted to import, iphoto only sees the previously imported photos and asks if I want to import duplicates. WTHeck?

Launch Image Capture and see if it can recognize those photos and download them to a folder on the Desktop.
What camera do you have and does it have a removable memory card? If it does connect it to your Mac via a card reader (your iMac may have one in its side) and copy the photos from the card to a folder on the Desktop. Once you have the photos there and can confirm that they can be read (user Preview to view them) put the memory card back in the camera and reformat it with the camera. Take some test shots and try importing into iPhoto again.
OT

I was exporting photos from Light Room 5.3 to Face Book when this 'fatal error' message popped up.

AN INTERNAL ERROR Has OCCURED: HOW CAN I FIX THIS PROBLEM? PLEASE HELP> THANK YOU.
can't parse JSON at char 1 of: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN"
   "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml"
   xml:lang="en" lang="en" id="facebook">
<head>
    <title>Facebook | Error</title>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    <meta http-equiv="Cache-Control" content="no-cache" />
    <meta name="robots"              content="noindex,nofollow" />
    <style type="text/css">
      html, body {
        margin:       0px;
        padding:      0px;
        text-align:   center;
        font-family: "Lucida Grande", "Tahoma", "Verdana", "Arial", sans-serif;
        color:        #333333;
      a.menu {
        margin:     auto;
        position:   relative;
        display:    block;
        width:      964px;
        height:     29px;
        background: #3B5998 url('https://s-static.ak.fbcdn.net/common/error.png')
                    top center no-repeat;
      .core {
        text-align: left;
        margin:     auto;
        width:      904px;
        padding:    1em 0em;
      h1 {
        font-size: 18px;
      p {
        font-size: 13px;
      .footer {
              border-top: 1px solid #DDDDDD;
        color:      #777777;
        float:      left;
        width:      904px;
        padding:    5px 8px 6px 0;
        font-size: 11px;
    </style>
    <script type="text/javascript" charset="utf-8">
      function back() {
        if (1 < history.length) {
          history.back();
          return false;
        return true;
    </script>
</head>
<body>
    <a class="menu" href="http://www.facebook.com/"></a>
    <div class="core">
      <h1>Sorry, something went wrong.</h1>
      <p>We're working on getting this fixed as soon as we can.</p>
      <p><a onclick="return back();" href="http://www.facebook.com/">Go Back</a></p>
      <div class="footer" id="pagefooter_copyright">
        Facebook ©
        2013
        ·
        <a href="http://www.facebook.com/help/">Help</a>
      </div>
    </div>
</body>
</html>

Hi,
Thanks John!
For some reason LR was not seeing the files on the drive. I reconnected it and it worked!
Thanks again,
Sherry

I recently purchased the iphone6 and since it was activated, I can not see any text messages from people with an iphone, on Verizon Messages. Any advice?

I recently purchased an iphone 6, and since it was activated on Sunday, I am unable to see any text messages from iphone users, on my Verizon Messages. Any suggestions?

Hi Erin,
The reason I asked is I like using Verizon Messages and found out via a chat on your website that with iMessaging, you can't see those messages on Verizon Messages. This phone is for a teen ager so I want to make sure all of the fun things about an iPhone are still intact if I turn off iMessage. r do you know of an Apple product that works the same way as Verizon Messages?

Ios 7 notes go lost and missing. Ipad and iPhone delete all notes created since ios7 change from ios6.

I observed that ever since update to ios7 -any notes I have written -just disappear, both from iPhone and ipad.

Basic troubelshooting steps have not changed in iOS 7. Restart, reset, restore from backup, restore as new.

Issue with pictures changing from light to dark

This is hard to explain,
I finish editing my pictures, save as PSD and a 2nd as jpeg.
i view the picture in windows live gallery (windows 7 64bit) and it has changed to a dark deep contrast.
I open the jpeg or the PSD file and they both appear as i originally saved them until I select/ click on it. and i get the darker deep contrasted image.
I have tried to have Photoshop elements 9, in preferences set to windows color and I tried it at Adobe no difference.
Jpegs are saved as sRGB but it is affecting all images, fine while editing but when saved and reviewed it changes and when opened i get to different contrasting views of the same image when selected. This is really anoying me as you think your done and it looks completely different when you review it. HELP!!
please keep your helpful comments to a basic understandable level.

I always recommend sticking with sRGB from the point of shooting photos, through editing and printing. It’s pretty universal and if you keep your workflow settings as sRGB it will avoid profile conflicts.
Start with the elements editor and check your workspace settings by clicking:
Edit >> Color Settings
Click image to enlarge.
Then click on the Windows Start button and type Color Management and press return.
Check all of your settings are consistent.
Finally check your profiles when saving files in the Editor.
If you keep everything consistent you should have no problems.

Not seeing True Type Font: eurofurence light in InDesign 2.0

I am trying to do some graphic work in InDesign 2.0 and I cannot find the "eurofurence light" which is a True Type Font.
My computer is running Windows Vista.
I have installed the fonts into Windows Fonts at C:\Windows\Fonts
Microsoft Word has the font avalible in both upper and lower case.
Photoshop CS2 has the font but it I cannot get it to type a lower case letter.
How can I get InDesign 2.0 to allow me to use "eurofurence light" True Type Font?
Thank you,
John

In reading other posts I see that there is more information about the font that I can give.
Font Name: eurofurence light
Version: 4.0 2000-03-28
True Type Outlines
I installed it via Control Panel/Appearance/Fonts.
I have scrolled all the way to the bottom of the Indesign font list and slowly checked the whole list several times to see if it located in a special place on the list.
Thank you,
John

D30 not seeing KB during post from back panel

This is a really more of an annoyance than an issue but I've noticed the D30's we're setting up don't see the KB during post when it's connected to the back USB ports on the Mobo. Front panel reads it fine. It's not connected to the USB 3.0 ports either (indeed it's on USB1 whichhas the KB logo).
Unit will generate a KB error then attempt a PXE boot (which fails) at which point it will sense the correct drive and boot normally. KB/mouse work fine once it's booted. The cloned machine has the issue; the donor does not. Identical BIOS version / settings. I'm sure I'm missing something obvious; it's just perplexing since the front panel board works fine but the back panel doesn't - kinda counter intuitive. Sure I could enable a BIOS setting to ignore the keyboard but what fun would that be?

What BIOS version are you using?
Are you using the (Lenovo) standard USB keyboard or something 3rd party?
Any chance it's a false failure on the the failing system? Are you able to get into BIOS setup using F1 on the keyboard even though the system is logging a KB error?
Can't say I've seen this on any of our systems.

I can hear but not see avi's imported from my digital camera

I can't play avi files from videos I have taken on my digital camera. When I open them, I can hear the audio but I can't see the video. Is there a solution to this problem?

http://perian.org
Free. Try it.

Restore from light room

How do I do a complete restore of my computer from yesterday?
I want to restore everthing. Imac 10.7.5
thank You
Dcik

I meant to say time machine not lightroom
Thank You
Dick

Router not seeing the return value from a webservice

Hello. I have two input fields and a button that calls a web service, is an action that is passed to a router.
So it looks like this form-->execute web service-->router-->decision
I'm passing back a string of success or failure as follows:
@WebMethod
public String doLogin(String userName, String password)
if(userName.equals("1"))
return "failure";
return "success";
It executes the method fine, but the router doesn't see the return value correctly. It always evaluates to false (which is the default)
My text boxes and button is defined as follows:
<af:inputText value="#{bindings.arg0.inputValue}"
label="Username:"
required="#{bindings.arg0.hints.mandatory}"
columns="#{bindings.arg0.hints.displayWidth}"
maximumLength="#{bindings.arg0.hints.precision}"
shortDesc="#{bindings.arg0.hints.tooltip}">
<f:validator binding="#{bindings.arg0.validator}"/>
</af:inputText>
<af:inputText value="#{bindings.arg1.inputValue}"
label="Password:"
required="#{bindings.arg1.hints.mandatory}"
columns="#{bindings.arg1.hints.displayWidth}"
maximumLength="#{bindings.arg1.hints.precision}"
shortDesc="#{bindings.arg1.hints.tooltip}">
<f:validator binding="#{bindings.arg1.validator}"/>
</af:inputText>
<af:commandButton actionListener="#{bindings.doLogin.execute}"
text="doLogin"
disabled="#{!bindings.doLogin.enabled}"
action="doLogin"/>
</af:panelFormLayout>
My loginpagedef.xml is as follows:
<?xml version="1.0" encoding="UTF-8" ?>
<pageDefinition xmlns="http://xmlns.oracle.com/adfm/uimodel"
version="11.1.1.51.88" id="loginPageDef"
Package="customerportal.pageDefs">
<parameters/>
<executables>
<variableIterator id="variables">
<variable Type="java.lang.String" Name="doLogin_Return"
IsQueriable="false" IsUpdateable="0"
DefaultValue="${bindings.doLogin.result}"/>
<variable Type="java.lang.String" Name="doLogin_arg0"
IsQueriable="false"/>
<variable Type="java.lang.String" Name="doLogin_arg1"
IsQueriable="false"/>
</variableIterator>
</executables>
<bindings>
<methodAction id="doLogin" RequiresUpdateModel="true" Action="invokeMethod"
MethodName="doLogin" IsViewObjectMethod="false"
DataControl="OracleWebServices"
InstanceName="OracleWebServices"
ReturnName="OracleWebServices.methodResults.doLogin_OracleWebServices_doLogin_result">
<NamedData NDName="arg0" NDValue="${bindings.doLogin_arg0}" NDType="java.lang.String"/>
<NamedData NDName="arg1" NDType="java.lang.String"
NDValue="${bindings.doLogin_arg1}"/>
</methodAction>
<attributeValues IterBinding="variables" id="arg0">
<AttrNames>
<Item Value="doLogin_arg0"/>
</AttrNames>
</attributeValues>
<attributeValues IterBinding="variables" id="arg1">
<AttrNames>
<Item Value="doLogin_arg1"/>
</AttrNames>
</attributeValues>
</bindings>
</pageDefinition>
What am I doing wrong? I can never seem to get the router to view the result coming back from the web service. Thanks in advance!

Hi,
Can you try this
<method-call id="DepartmentCheck">
<method>#{bindings.DepartmentCheck.execute}</method>
<return-value>#{pageFlowScope.checkResult}</return-value>
<outcome>
<fixed-outcome>result</fixed-outcome>
</outcome>
</method-call>
<router id="routerReturnCheck">
<case>
<expression>#{pageFlowScope.checkResult==true}</expression>
<outcome>succes</outcome>
</case>
<default-outcome>return</default-outcome>
</router>
just put the result of a method in pageFlowScope variable then the flow case go the router where you evaluate the variable
hope this helps

I cannot send an e-mai directly from light room

The error message is "Internal Error occurred: AgExpoert Rendition; cannot import a photo exported to a temporary location"
How do I resolve this issue?

The port is determined by your Email Service Provider. So first off, who is your email provider?
Port 110 is not a standard port for sending. 25, 465 and 587 are the standard SMTP ports (sending) and 110, 143 and 995 are the standard POP/IMAP ports (receiving).

~system~ version folder not clean after persistance change from dbfs -fsdb

I configure a repository manager DBFS and I create some content in it. Then I delete the content and also the repository configuration. I re-create the repository with FSDB persistance with the same name than before. But if I watch in the /fsdb/system/Versions/ folder I found many folder and documents such as 0... 1... 2... and so on. If I try to delete it the following message appear:
System error (com.sapportals.wcm.repository.IncompleteOperationException): null System error (com.sapportals.wcm.repository.IncompleteOperationException): null System error (com.sapportals.wcm.repository.IncompleteOperationException): null System error (com.sapportals.wcm.repository.IncompleteOperationException): null
I think that the information on DB is not correct and versions of documents that do not exist is diplayed. How can I clean the content of /system /Versions?
Any idea.
Thank in advance.
Regards,
Fabio Sambugaro
Calpeda S.p.A.

Hi Praveen Gudapati,
I create a new versions folder in /fsdb/Versions_rep and in the CM repository configuration I set the
- Root Directory for Versions: /fsdb/Versions_rep (before it was /fsdb/Versions)
- I stopped the instance.
- In filesystem /fsdb/Versions/versiones/* I found all the folder and object I delete them with rm command.
- I restart the instance, but when I go to Content administration - KM Content - fsdb - .system - versions I found o... 1... 2... ecc. again.
It seems that the filesystem and the db doesn't syncronized.
Thanks.
Regards,
Fabio Sambugaro

Not seeing my metadata changes from Light Room 3 in PSE 8

Similar Messages

Maybe you are looking for