Not show incoming caller's name

dear team
If anyone in my contact list calling me, it doesn’t display their name but just number. Look like that number never save in my contact list.
I hope what i have explained to you will be cleared for you to solve my problem.
Looking forward to hearing from you.
Regards,
zubier

Never mind. It was part of the Voice control setting.

Similar Messages

Name does not show incoming calls, but only the number

Hi, i have a BB 9300 with OS6 brand wind italia. this is my problem:
-sometimes when my rubric contact call me i can't seeyour name, but only your telephone number. I noticed that is common when the phone is locked with password.
I called the support, but I have not receives assistance!
I also replaced the device, but the new one is equal.
Please help me!!!!
Sorry for my bad english

It sounds as though you have content protection enabled on your address book. To disable this feature in OS6, search for "Encryption" within Options. Uncheck the "Include contacts" box.

Skype do not show the caller's name, even though i...

I have a paid account number, and when receiving calls I have to recognize by heart who is calling since Skype only show his phone number and not his name. Please help!

Having MDT display the wizard in case of a error (red/salmon) is by design.
Better to figure out which steps are failing in your task sequence and/or marking the failing steps with "Continue on error" in the Task Sequence Editor. That will suppress errors that are really warnings.
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

2730 classic incoming calls numbers/names not stat...

Hi!
I recently received a Nokia 2730 as a gift. I transferred my Orange sim card into this phone.
The problem is that for incoming calls no name or telephone number is shown. It just shows "Call 1" so I have no idea who is calling. Phone numbers are also not stored in the Call Records, just "no number", so if I miss a call I have no idea who it was. It makes no difference whether a number is stored in my contacts or not.
How do I fix this so I can see who/what number is calling?
Thanks for your help!

1st check with orange to see if its set up for caller id
2nd make sure you dont have duplicate contacts and check what memory your using either phone or sim memory of both
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

How to hide or do not show the receipt's name after miss called?

1. How to hide or do not show the receipt's name after miss called?
2. I do not want to show my message statement in the screen.

I have also registered to this forum to inform that the problem with showing the MAC-address in the sidebar of the finder is still not solved.
The strange thing is that the Embedded Web Server says:
"This specifies the Bonjour domain name assigned to the device, in the form <host name>.local. If a user-specified host name has not been assigned, the default host name HPxxxxxx is used, where xxxxxx are the last 6 digits of the LAN hardware (MAC) address. This option cannot be modified."
But I did assign a user-specified host name and that name does show-up everywere (also within Bonjour), except in the sidebar of the finder (hp###xx##x####). Lots of people have the same issue, when searching on the interet, but not one has found the solution.
Please help with solving this issues?

Laserjet cm1415 will not stop showing "Incoming Call"

I have the fax setup in manual mode and it will not stop showing "Incoming call" on the panel even thjough there is no call comming in. Other than that everything works well. Any body have any ideas on how to get it off of that so the printer can go into sleep mode?
Thanks

The "Incoming Call" message is shown whenever we see a ring signal on the line, regardless of the fax receive mode.
If this message is showing up when no fax is being sent, then it means that there is noise on the phone line. You can contact your phone company to discuss options in reducing the noise on your phone line.
If this message is showing up with no phone line plugged in, then the modem inside the printer is detecting noise. It is possible that the internal fax parameters have become corrupt. If that is the case, then you can perform a "Restore Defaults" in order to reset them. Note: doing this will erase all of your settings. You can print out a configuration report before doing this so you can reset them. A restore can be done at the control panel by pressing [Setup] on the main screen (the button with the wrench on it), then select "Service" and then "Restore Defaults."
This is based on my own experience with the product.
I am an HP Employee.

Why is my iPhone 4S not showing my caller Id info while I'm a call

Why is my iPhone 4S not showing my caller Id info while I'm a call?

As in the manual page 49:
Call forwarding, call waiting, and caller ID
The following information applies only to GSM networks. For CDMA networks, contact your carrier for information about enabling and using these features. See support.apple.com/kb/HT4515.
Turn call forwarding on or off: Go to Settings > Phone > Call Forwarding. The Call Forwarding icon ( ) appears in the status bar when call forwarding is on. You must be in range of the cellular network when you set iPhone to forward calls, or calls won’t be forwarded. FaceTime calls are
not forwarded.
Turn call waiting on or off: Go to Settings > Phone > Call Waiting. If you’re on a call and call waiting is turned off, incoming calls go directly to voicemail.
Turn caller ID on or off: Go to Settings > Phone > Show My Caller ID.

HT1351 my itunes is not showing my devices's name what should i do???

my i tunes is not showing my device's name what should i do???

Hello parth 00,
Thank you for the details of the issue you are experiencing with your iPod touch not appearing in iTunes. I recommend following the steps in the article below to troubleshoot the issue you described:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thank you for using Apple Support Communities.
Best,
Sheila M.

My iPhone 5, periodically,will not show the call waiting number. It beeps but will not give me the option to swicth over or show me who is calling. The call doesn't appear in my "recents" either.

My iPhone 5, periodically,will not show the call waiting number. It beeps but will not give me the option to switch over or show me who is calling. The call doesn't appear in my "recents" either.

We appreciate your feedback on this matter, gingerspice913. I've not come across this issue before. Do you know how long it has been since the issue began? Please try to reset the network settings to see if it helps http://vz.to/1swAJbD?
TamaraH_VZW
Follow us on Twitter @VZWSupport

Contact name not showing in call/sms log even when I call/sms from my address book.

Two things have changed on my phone recently.
1. I ran the latest update 4.3.2
2. My phone was not showing all the contacts in my address book that is in my Mobile Me account. Mobile me had 166 contacts. The iPhone 4 had 136. I I unchecked the syncing of my contacts on my phone. This removed all the contacts from my phone. Then I check the syncing options again. All 166 appeared on the phone.
I'm not sure which of the two caused the issue but now anytime someone who calls their name does not appear on the display or log, just their number. I can even call people from my address book and the display shows that I am calling them with their name and photo on display. However, in the call log the name does not show just their number. This applies for text messages. I send a message directly from within the contact card in the address book and in my text log it shows only the number and not the name.
I've turned the phone off and on a couple of times.
I would appreciate any advice.
Cheers

Thanks iraghib,
In the end I reset my phone to factory settings. I created a back up of my address book and ical. Reset the phone and did a sync again. This fixed it all. I didn't need to use the backups but is was nice to know they were there. I felt entering the various passwords for all my installed apps was a much better deal than adding the international area code to the 166 contacts I have in my address book.
Good luck. And thanks for the post.

BB will not Display Incoming Calls Contact Info

Hi there,
I am a new user to the Black Berry world, and have encountered a problem I hope can be fixed.
I have 84 contacts in my Adress Book in my Black Berry 8900, all with 10 digit phone numbers linked to each.
I do not pay for caller ID through Rogers Canada (Just to let you know).
The problem I am having is that, when one of my contacts call me, even though I have there phone number in my contact list their name or picture does not appear. I simply get a pop up saying Incoming Call Unknown Number...
I've done some searching online and found that in some other black berries people had this fixed by turning off their content protection in secruity>General settings> Content Protection.
This however did not work for my phone.
I have had a Sony Ericsson W580i which was capable of doing this simple feature from over a year ago and was on the Rogers service for that phone too.
I just got off the phone with Rogers and they are claiming that without Caller ID it is impossible to do this simple feature on a Black Berry.
Hope I can have my issue solved here!
Thanks in advance!
Nick

Well, unless I'm missing it, none of those posts referred to not having the CallerID service provisioned on the line...rather, they seemed to be discussing getting callerID to display from contacts in the device address book versus the SIM. Personally, I have no use for my SIM...I'm on VZW, though...not sure if other devices or other carriers can handle a BB with no SIM. Probably not.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Inter-Trunk not route incoming calls from out

Hi,
I setup one extra gateway where I try to route part of our calls. So far I have success to route internal calls into there, but when I'm making a test call from outside that ends into "number is not used" problem.
I have:
- Route ready, elsewere the internal calls are not working.
- PSTN usage, linked to the Route
- Trunk configuration where I have selected the PSTN usage
- Incoming numbers are coming in E164 format
I have also tested the "Test-CsInterTrunkRouting" and that gives "pass":
FirstMatchingRoute : Description=;NumberPattern=^\+358123654789;Name=Test
                     Gateway;SuppressCallerId=False;AlternateCallerId=
MatchingUsage      : Test PSTN Usage
MatchingRoutes     : {Description=;NumberPattern=^\+358123654789;Name=Test
                     Gateway;SuppressCallerId=False;AlternateCallerId=}
But still, when I made a call from outsited the OCSLogger shows that mediation server try to offer call to Front-End which says only: "SIP/2.0 404 Not Found" and then bye-bye.
What is the missing magic, which made the mediation server to see alternative route? I hope it is not required that mediation server must be collocated on the Front Ends, as that one I do not have.
Any good ideas?
ps.
I'm not sure does it matter, but my Lync gives "SIP/2.0 403 Forbidden" when there is coming call from extra gateway. But as the calls into there works, then I don't see why external calls should not also work.
Petri

Could it be even so, that intra-trunk routing requires consolidated mediation server? As the call is owned by the Mediation server (stanalone), and it is trying to offer that to FE. FE reply "does not exist". Because of the standalone Mediation
server does not have the call routing engine like FE have, the call is lost.
I started to think above as Lync users are able to call to that number. So FE is able to do the routing and get calls into the correct place.
I have to say also, I have read
Ken's blog about inter-trunk routing, I have to say that I'm not so sure what he means by this: "Fortunately, in most cases, adding PSTN usages to the trunk has no effect, since there is almost always a Lync user assigned to the incoming phone
numbers". Why to add additional routing for the numbers which are already inuse? I hope it is not required, that you need to have a users ID for each number you do the inter-trunk routing?
Petri

Asterisk not seeing incoming calls

I have Skype Connect set up and an asterisk box set up to use it. I can succesfully call out from asterisk, but I do not see any incoming calls on the number assigned to my Skype Connect Profile. If I call the number it rings a few times then gives a busy signal.
Here is my sip.conf:
[general]
context=from-skype ; Default context for incoming calls
allowoverlap=no ; Disable overlap dialing support. (Default is yes)
udpbindaddr=0.0.0.0 ; IP address to bind UDP listen socket to (0.0.0.0 binds to all)
bindport=5060
bindaddr=0.0.0.0
tcpenable=yes ; Enable server for incoming TCP connections (default is no)
tcpbindaddr=0.0.0.0 ; IP address for TCP server to bind to (0.0.0.0 binds to all interfaces)
srvlookup=yes ; Enable DNS SRV lookups on outbound calls
notifyhold = yes ; Notify subscriptions on HOLD state (default: no)
sendrpid=yes
register => 9905XXXXXXXX:[email protected]/9905XXXXXXXX
[skype]
type=peer
context=from-skype
username=9905XXXXXXXX
secret=Redacted
canreinvite=no
insecure=port,invite
dtmfmode=rfc2833
host=sip.skype.com
realm=sip.skype.com
nat=yes
qualify=yes
fromuser=9905XXXXXXXX
fromdomain=sip.skype.com
disallow=all
allow=g729
allow=ulaw
allow=alaw
trustrpid=no
sendrpid=yes
[1001]
type=friend
callerid=1001
canrevinite=no
dtmfmode=rfc2833
mailbox=1001
disallow=all
allow=ulaw
transport=udp
secret=password
host=dynamic
context=default
And my extensions.conf
[general]
static=yes
writeprotect=no
[globals]
TRUNK=Skype
[default]
[from-skype]
exten=>9905XXXXXXXXXX,Noop(${CALLERID(name)} , ${CALLERID(num)})
exten=>9905XXXXXXXXXX,n,Dial(SIP/1001,30,t,r)
exten=>9905XXXXXXXXXX,n,voicemail(100|u)
exten=>281203XXXX,Noop(${CALLERID(name)} , ${CALLERID(num)})
exten=>281203XXXX,n,Dial(SIP/1001,30,t,r)
exten=>281203XXXX,n,voicemail(100|u)
The last 3 lines were my best guess at how to tell it what the incoming call phone # is and I'm not sure it's entirely necessary. Any thoughts?

Dear MRLindstrom,
I am sorry to hear that you are having issues receiving incoming calls to your Skype Connect Online number.
In looking at your Asterisk configuration, I would suggest changing your 'incoming call field' (the last 3 lines you have included below) to your 9905xxxxxxxxxx, rather than 281203xxxx.
Please make that change and let us know if you are able to receive calls.
Thank you,
MariaA
Skype Enterprise Support

New e75 wont show incoming call details

hey guys, just as the title states, i have purchased a new e75 and when i recieve calls my phone only displays 'call', it does not display any incoming caller i.d such as the callers name and number. Anybody having the same problem? can anybody help me? do i need to take it back to the shop? i just bought the phone today everything else seems to be working fine. thanks.

Thanks cjlim.
But it was not the problem.
I had previously removed any duplicated contact, or duplicated entry within a contact.
But I found the cause of the problem.
The file contact.db was corrupted.
Here how I solve the problem.
I erased all my contacts, made a backup (with PC Suite), then restore the phone to the factory settings (with #7370#).
After that I restore the phone with PC Suite.
The contacts, I picked up a one month old copy I had with outlook express.
It solved the problem.
Not a simple task I think.
OVI people should issue a patch or something to save all customer out there.
Surely it was caused by ovi.
Thanks again.

Help fix my problem, I am not receiving incoming calls on my iphone4

When I am on the phone I can hear when I get an incoming call, but I do not see the call that is coming in. The calls do not show on the screen or give me the option to retrieve the phone call. I have checked the settings over and over, I have reset my cell, I have turned it of and on, and have had people call multiple times to see if it was working again. It has become a big inconvienience.

Hi EndangeredPanda,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Hope this helps ...
- Judy

Not show incoming caller's name

Similar Messages

Maybe you are looking for