Not showing a secure connection

in firefox 4 its not showing when im connected to a secure connection like in previous versions

The padlock has been replaced by the site identity button, for details on using it see https://support.mozilla.com/kb/Site+Identity+Button
If you want to add a padlock icon to the location bar, you can use the Padlock add-on - https://addons.mozilla.org/firefox/addon/padlock-icon/

Similar Messages

Clean Access Server could not establish a secure connection

I have a OOB Real IP GW setup on v4.1.2
I seem to have a problem with the CAS connecting to the CAM although I have added the CAS to the CAM and can manage the CAS from the CAM.
I noticed while troubleshooting client authentication that the client was not being redirected to the logon web page and it had full access to the trusted network from the untrusted authentication vlan. I eventually figured out that if I change the CAS Filter Fallback method from Allow to ignore then it tries to authenticate the client. However the fact that the fallback is activated tells you that something is not right.
I have 2 problems:
A) The clients web page is redirected for authentication but it only lists the domain name in the URL and not the hostname or host IP. In the lab I do not have a DNS server and it would not help as it does not include the hostname in the URL anyway. How do I fix this or perhaps it's related to the 2nd problem.
B) When I manually change the URL by replacing the domain name with the IP of the CAS (untrusted OOB Real IP GW) then I get the following error message when logging on:
Network Error:
Clean Access Server could not establish a secure connection to Clean Access Manager at mydomain.com.
This could be due to one or more of the following reasons: 1) Clean Access Manager certificate has expired 2) Clean Access Manager certificate cannot be trusted or 3) Clean Access Manager cannot be reached.
Please report this to your network administrator.
I would guess the culprit is No 2 but surely the system can run on self signed certificates? I have an NTP server so time is in sync. I have even tried regenerating the cetificates on the CAM
& CAS.
Any ideas?

To overcome problem B, I regenerated the SSL Certificates using the host IP address instead of the name for all the CAM & CAS appliances. This seems to have resolved this problem.
I also SSH'd from each of the CAS's to each of the CAM's from the CLI and it then prompts to permanently store the certificates. I'm not sure it this was necessary though.

I have a new iPad wi-fi lte 16gb.when I try to sync thru I tunes it keeps on accessing I tunes stores.i have windows xp service pack 3.after running diagnostics it showed iTunes secure connection failed.unable to sync completely even once. Plz help.thanks

I have a new iPad wi-fi lte 16gb.when I try to sync thru I tunes it keeps on accessing I tunes stores.i have windows xp service pack 3.after running diagnostics it showed iTunes secure connection failed.unable to sync completely even once. Plz help.thanks

I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Why can I not make a secure connection using safari?

why can I not make a secure connection using safari?

I have the exact same problem. I just updated to 4.3.3 and now my inline controls on my earphones don't work. The earphones work, but the controls don't. It doesn't even recognize that there is a mic attached. Even with the earphones in it still uses the built in mic. Why did my controls stop working?!

Open Directory is not providing a secure connection

I've been setting up Yosemite Server, but I haven't been able to get a second Mac to join onto the Open Directory service. When clicking Join… in Accounts Preferences on the client machine, and entering the address, it asks me whether I want to trust the server's certificates, which I do; and then, in a second dialog, it says "This server does not provide a secure (SSL) connection. Do you want to continue?"
My question, simply, is how do I confirm that my server is providing a secure Open Directory connection? If it's not, how do I enable it, and if it is, how do I convince my client to use it?
Background:
After doing the initial setup, I turned on Open Directory before noticing that the host name was not correct—I had not changed it from "Xxx.local". So I changed it to the correct domain as pointed to by an external DNS server. It mentioned that I'd have to reconfigure a number of services, Open Directory among them. I turned Open Directory off, then on, and confirmed in the Certificates section that all services were using the newly-generated certificate with the correct domain name. I turned on Profile Manager, and added a test network user, and an encrypted-only (SMB3) share for its home folder. For good measure, I turned on the Websites service.
At several points along this process, I tried to get the client to join the server's Open Directory, each and every time with the same message that the server does not provide a secure connection. I removed the applicable certificates on the client and tried again, just to be sure it wasn't using an outdated version of them—to no avail. The error is exactly the same whether I use the global .com hostname, the .local hostname, the global IP, or the local 10.0.1.x IP.
The server is running Mac OS X 10.10.1, and the client MBP is on 10.10.
The client is currently on the local network, but I aim to use Portable Home Directories and sync from other locations, so an unsecured OD connection is obviously unacceptable.
Any advice would be dearly appreciated!

First, follow the instructions in this support article to configure the clients to use the server's certificate to bind via LDAPS. The common name in the certificate must match both the server's hostname and its domain name, as resolved by the clients. You will get nowhere if those conditions aren't met.

Hi every one if i connect wired headset to my new iPad it is not showing a headphone connected symbol .is it by default not visible or something happen thanks in advance

Hi every one if i connect wired headset to my new iPad it is not showing a headphone connected symbol .is it by default not visible or something happen thanks in advance

When you have kernel panics, the pertinent information is in the panic report.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway.

TS1424 itunes could connect to this iphone could not establish a secure connection to this device

itunes could not connect to this iphone could not establish a secure connection to this device

Same problem with my iPhone 4S on iMac and MacBook Pro with OSX Mountain Lion
iPod work fine...
USB is connectet directly to computer not HUB.
Battery is on 88%
No updates available on App Store...
God back Steve for few more years please

Cannot open page Safari cannot open the page because it could not establish a secure connection to the server

Hello Apple Experts!!
I Am Surendra and very new to this forum.. I just came across a problem with my Iphone while connecting to my company WIFI.. we are using Web authentication.. meaning..
The user will try to connect to the wireless network, the client will get the IP address and they are forced to open up the browser to provide the USERNAME and the PASSWORD on the webpage, once they pass the auth they will be able to access to the internet.
The WEB PAGE that asks for the USERNAME and the PASSWORD is HTTPS and for some reason that page is not at all opening and i am getting the below error.. If i disable HTTPS on the cisco Device the IPHONE works great..
Cannot open page Safari cannot open the page because it could not establish a secure connection to the server
This is happening only on the OS 5 and on the OS 4 everything works just great!!
I have a feeling that this has to do something to do with HTTPS / SSL connection with the IPHONE SAFARI or OS 5
Am connecting to Cisco Wireless LAN COntroller and the access point acting as the WIFI devices..
Any help on the same will be much appreciated!!
Regards
Surendra

I'm having a similar issue. Connecting on my iPad FROM ANYWHERE to my work's domain results in the message by the OP.
I checked the ciphers enabled by their page, and this was returned:
High Strength Ciphers (>= 112-bit key)
    SSLv3
      EDH-RSA-DES-CBC3-SHA       Kx=DH         Au=RSA     Enc=3DES(168)    Mac=SHA1
      DES-CBC3-SHA               Kx=RSA        Au=RSA     Enc=3DES(168)    Mac=SHA1
      RC4-MD5                    Kx=RSA        Au=RSA     Enc=RC4(128)     Mac=MD5
      RC4-SHA                    Kx=RSA        Au=RSA     Enc=RC4(128)     Mac=SHA1
    TLSv1
      EDH-RSA-DES-CBC3-SHA       Kx=DH         Au=RSA     Enc=3DES(168)    Mac=SHA1
      DHE-RSA-AES128-SHA         Kx=DH         Au=RSA     Enc=AES(128)     Mac=SHA1
      DHE-RSA-AES256-SHA         Kx=DH         Au=RSA     Enc=AES(256)     Mac=SHA1
      n/a                        Kx=DH         Au=RSA     Enc=Camellia(128) Mac=SHA1
      n/a                        Kx=DH         Au=RSA     Enc=Camellia(256) Mac=SHA1
      DES-CBC3-SHA               Kx=RSA        Au=RSA     Enc=3DES(168)    Mac=SHA1
      AES128-SHA                 Kx=RSA        Au=RSA     Enc=AES(128)     Mac=SHA1
      AES256-SHA                 Kx=RSA        Au=RSA     Enc=AES(256)     Mac=SHA1
      n/a                        Kx=RSA        Au=RSA     Enc=Camellia(128) Mac=SHA1
      n/a                        Kx=RSA        Au=RSA     Enc=Camellia(256) Mac=SHA1
      RC4-MD5                    Kx=RSA        Au=RSA     Enc=RC4(128)     Mac=MD5
      RC4-SHA                    Kx=RSA        Au=RSA     Enc=RC4(128)     Mac=SHA1
This appeared to be a more than sufficient cipher list, yet my iPad won't load any page. I highly doubt it's a problem with SSL2 not being enabled because SSL2 has been deprecated for awhile now.
Any ideas?

Network Error: Clean Access Server could not establish a secure connection to Clean Access Manager

Hello everyone
I am implementing a failover solution of NAC in OOB VG version 4.8, I have 2 CAS and 2 CAM.
The Error I am getting is when I connect to both IP address and the FQDN of the CAS.
===========
Network Error:
Clean Access Server could not establish a secure connection to Clean Access Manager at camsrv3.cadivi.gob.ve.
This could be due to one or more of the following reasons: 1) Clean Access Manager certificate has expired 2) Clean Access Manager certificate cannot be trusted or 3) Clean Access Manager cannot be reached.
Please report this to your network administrator.
==========
For the CAM's I use this names camsrv1 and camsrv2. then generate a CSR in the camsrv1 with the name camsrv3.mycompany.com corresponding to virtual ip and it exported to camsrv2, Install the CA certificate of the company and everything works perfect.
This is the failover configuration
CAM:
Primary:     10.1.206.248 camsrv1.mycompany.com
Secondary: 10.1.206.249 camsrv2.mycompany.com
Virtual:       10.1.206.250 camsrv3.mycompany.com
Then I do exactly the same steps for the CAS's and this is the failover configuration:
Primary:     10.1.216.248 cassrv1.mycompany.com
Secondary: 10.1.216.249 cassrv2.mycompany.com
Virtual:       10.1.216.250 cassrv3.mycompany.com
Then I add the certificate of CAM in the CAS on the tab "Trusted Certificate Authorities" and vice versa.
The communication between all the CAM´s and CAS´s is correct (Primary, Secondary and Virtual). I can ping the IP and the FQDN and I can also manage the CAS through the CAM.
I verify that the time was right in the CAM and the CAS and all good up there.
Appreciate your help
Eduardo Navas

Eduardo,
Bump up the CAS/CAS communications logging on both the CAS and CAMs, and then look in the log files for clues.
On CAM they live in /perfigo/control/tomcat/logs and on CAS in /perfigo/access/tomcat/logs
HTH,
Faisal
If you find this post helpful, please rate so others can find the answer easily

Hotspot login cannot open the page because it could not establish a secure connection to the server.

I am trying to connect to a public wifi network. My iPad connects marvoulesly. My iPhone not so much. I have an iPhone 4 and everytime I go to connect, it goes to a pop up page where I'm supposed to click a link to adhere to their TOS. When I get the pop up page I get "Hotspot login cannot open the page because it could not establish a secure connection to the server"
I've reset the network settings and nothing changed. Same error message. Any tips or tricks to fix this? I'm laid up on bed rest in the hospital and would really rather that I not use all my data minutes...
Thanks!

Updated to iOS6 on an iPhone 4 this morning, and now when I attempt to connect to my work wireless, it connects for a moment then attempts to popup some login page (I sometimes get the hotspot login error you've mentioned) and because the page doesn't exist I can't get connected to the wireless netowrk.
What the heck have apple broken in this update?
Why when joining a normal wireless network is my phone even going near a Login page? What is this and how do I disable it?
Oh, and I'm posting here because your suggestions of disabling the Wi-Fi and Cellular data netowkrs doesn't solve the problem.
[Edit: seems while typing this leaving the cellular data disabled, it's now letting my join wireless - seems to be some timeout on it fixing the issue - I'd still like to know what this login page is it's attempting to locate is for.]
-A

How to update to ios6 when "could not establish a secure connection to the device" message appears with Jailbroken iPhone 4

Hi all,
I've been trying to update my Jailbroken iPhone 4 to ios6 but, unfortunately, I keep getting the "could not establish a secure connection to the device" when connecting it to iTunes. I've tried updating "over the air" but this flags up an error too. Finally, I can't restore to a previous backup because, the backups I previously had, were stored on my old (broken) computer.
CAn anyone help? Any suggestions would be greatly appreciated!
Thanks,
Rakesh.

You jailbroke your phone.
Only google may help now.
You'll find no help here.
If Haiku you don't like,
Then to Google you should hike,
You jailbroke your phone,
Now on these forums you are alone,
'Tis a day of no cheer,
For we cannot help here.
In non-poem; You jailbroke your phone, which is not support by Apple, meaning updates will not work on it as they would if you were running official software.
As per the ToC for the device, and for these Discussion Boards (both you agreed too), you will not get support either from the discussion board, or from Apple directly.
Your best bet is to Google for help and learn a valuable lesson; Jailbreaking can definitely brick your phone.

My MacBook Pro is not showing it's connected but it is, my messages stopped working with my iPhone and is locking me out of my mail accounts

II'm having so much trouble with my MacBook Pro.
1. The wifi is not showing it's connected but it is
2. I used to be able to use messages as iMessage from my phone- that randomly stopped
3. It alerted gmail to lock my account.
Please help!

Log out, log back in, and try again.

Desktop Manager will not show I'm connected

My Bold will connect to my computer running Vista using USB. I can copy files if I do it myself. The Blackberry Device Manager shows I'm connected to my computer. The Desktop Manager program does not show I'm connected. It says that I am disconnected. I am the computer administrator. I have loaded the program using the "Run as Administrator" option enabled. This is very frustrating! Please help me.
Thanks
Solved!
Go to Solution.

I got it! I had installed the Microsoft Family Safety program on my computer and things seemed to start to go downhill from there. I uninstalled the program and everything seems to work fine again!

External discs not showing after Security Update

Did recent security update and all of a sudden one of my external drives which has worked fine on a Belkin hub for months is not showing up in Finder.
Fearing the drive may have failed I connected it to a Macbook running Leopard and it was nstantly seen.
iDisk was also not showing up for mtime to time.
Anyone else having Finder issues since updating?
AC

OK verified the system (OK) and external drive.
External drive had wrong free block count which has repaired.
The thing still isn't recognised on either Belkin powered hub but is recognised if I unplug the hub and connect it direct. Other identical external drives (I have several of the same make/model/capacity) work fine via the hub.
The problem drive spins up, the hub does not illuminate an LED for that USB socket (unlike the ones that work), then the drive spins down.
Connecting direct to the Mac and the drive spins up, spins down, then spins u again, and this pattern is completely reproducible.
If this were a pending hardware failure I'd expect startups to be random on the hub or the main USB port but they're not.
Very odd.
AC

The latest version does not show the security pad-lock, concerned about on-line purchases.

When you go to make purchases you always had a pad-lock in the lower right corner letting you know it was secure. This latest version does not and I'm concerned about on-line purchases.

In Firefox 4 you no longer have the Status bar that showed the padlock in previous Firefox versions.<br />
The padlock only shows that there is a secure connection and doesn't guarantee that you are connected to the right server.<br />
So you might still be connected to the wrong server if you make a typo in the URL and someone has claimed that mistyped URL.<br />
The functionality of the padlock has been replaced by the [[Site Identity Button]] on the left end of the location bar.
See also:
* http://www.dria.org/wordpress/archives/2008/05/06/635/
* https://support.mozilla.com/kb/Site+Identity+Button
You can use this extension to get a padlock on the location bar.
*Padlock: https://addons.mozilla.org/firefox/addon/padlock-icon/

Not showing a secure connection

Similar Messages

Maybe you are looking for